PIC18F67K22-I/PTRSL - 8-Bit 64MHz XLP MCU, 128KB Flash, 64-TQFP | Microchip
部品番号: PIC18F67K22-I/PTRSL ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $7.94 | $7.94 |
| 10 | $7.15 | $71.50 |
| 100 | $6.36 | $636.00 |
| 500 | $5.71 | $2,855.00 |
| 1,000 | $5.08 | $5,080.00 |
PIC18F67K22-I/PTRSL 概要
What is a PIC18 microcontroller? The PIC18 family is Microchip's high-performance 8-bit RISC architecture line, optimized for low power, robust peripherals, and a long product lifecycle, sitting above the baseline PIC16 and PIC12 families in Microchip's 8-bit portfolio. XLP (eXtreme Low Power) nanoWatt technology refers to a set of clocking, sleep mode, and peripheral gating techniques that allow sleep currents in the nanoamp range while retaining RAM and fast wake-up for battery-powered and energy-harvesting applications.
Key features include the nanoWatt XLP sleep current of approximately 20 nA, an active current of about 8 mA at 64 MHz, a CTMU peripheral for capacitive touch and precise time measurement, an Enhanced Universal Synchronous/Asynchronous Receiver/Transmitter (EUSART), two MSSP ports for SPI/I2C, multiple 16-bit timers, capture/compare/PWM modules, and a 12-bit A/D converter with up to 16 channels. The part also supports self-programming and an integrated LCD driver option on related die variants.
Technically, the PIC18F67K22 family uses a modified Harvard architecture with a 16-bit instruction word and 8-bit data path, executed through a 2-stage pipeline at 4 clock cycles per instruction. Internal oscillator options support 16 MHz to 64 MHz operation with PLL, providing clock accuracy suitable for UART communication without external crystals in many designs. The wide 1.8V-5.5V supply range enables direct operation from Li-Ion or two AA cells in portable designs.
Typical applications include capacitive touch user interfaces with the CTMU, battery-powered remote sensors with nanoWatt XLP, industrial control panels with 12-bit measurement, USB-enabled human interface devices when paired with an external transceiver, LCD-based consumer appliances, and automotive body/comfort modules using the wider PIC18 K-series derivatives.
When designing with this device, ensure proper decoupling with a 100 nF ceramic capacitor close to each VDD pin and a bulk capacitor on the regulated rail. The CTMU requires careful PCB layout and a reference current calibration step for accurate capacitive touch readings, and unused I/O pins should be configured as outputs low to minimize quiescent current.
This page consolidates distributor pricing, drop-in alternative MPNs sourced from Microchip's own part-numbering system, and practical design notes that are not aggregated in the manufacturer datasheet itself.
ドロップイン代替品: PIC18F67K22-I/PTRSL — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: PIC18F67K22-I/PTRSL （同一形状・フットプリント） — 相違点: Package, I/O Pins, Operating Temperature, Communication, Family.
クイック比較ツール — 並列比較する代替部品を選択:
PIC18F67K22-I/PT
✅ ドロップイン✓ 在庫あり
$4.6 / 個
データシートを見る →PIC18F67K22T-I/PTRSL
✅ ドロップイン📋 参考代替品（カタログ未掲載）
PIC18F67K22-E/PT
✅ ドロップイン✓ 在庫あり
$5.1 / 個
データシートを見る →PIC18F66K22-I/PT
✅ ドロップイン✓ 在庫あり
$3.96 / 個
データシートを見る →PIC18F66K22-I/MRRSL
✅ ドロップイン✓ 在庫あり
$3.55 / 個
データシートを見る →PIC18F67K22-I/PTRSL 最大定格＆電気的特性
| Family | PIC18F K2x Series (PIC18F67K22) |
| Core | 8-bit PIC RISC (modified Harvard) |
| Instruction Set Width | 16-bit |
| Max CPU Frequency | 64 MHz (16 MIPS) |
| Program Memory (Flash) | 128 KB (64K x 16) |
| RAM | 4 KB (3862 bytes) |
| Data EEPROM | 1 KB (1024 bytes) |
| Operating Voltage (VDD) | 1.8 V to 5.5 V |
| A/D Converter | 12-bit, up to 16 channels |
| I/O Pins | 53 (on 64-pin TQFP) |
| Timers | Multiple 16-bit timers / capture/compare/PWM modules |
| Communication | 2x EUSART, 2x MSSP (SPI/I2C) |
| Special Peripherals | CTMU (Charge Time Measurement Unit) |
| Low-Power Technology | nanoWatt XLP (sleep ~20 nA) |
| パッケージ | 64-pin TQFP (10x10 mm) |
| 動作温度 | -40C to +85C (industrial, -I suffix) |
| 実装タイプ | Surface Mount (Tape & Reel) |
| RoHS ステータス | Compliant |
PIC18F67K22-I/PTRSL ピン構成
| ピン 1 | RB2 — PORTB digital I/O bit 2 |
| ピン 2 | RB3 — PORTB digital I/O bit 3 |
| ピン 3 | RB4 — PORTB digital I/O bit 4 |
| ピン 4 | RB5 — PORTB digital I/O bit 5 |
| ピン 5 | RB6 — PORTB digital I/O bit 6 / ICSPCLK |
| ピン 6 | RB7 — PORTB digital I/O bit 7 / ICSPDAT |
| ピン 7 | VDD — Digital supply voltage |
| ピン 8 | VSS — Digital ground |
| ピン 9 | RC0 — PORTC digital I/O bit 0 |
| ピン 10 | RC1 — PORTC digital I/O bit 1 |
| ピン 11 | RC2 — PORTC digital I/O bit 2 |
| ピン 12 | RC3 — PORTC digital I/O bit 3 / SCL |
| ピン 13 | RC4 — PORTC digital I/O bit 4 / SDA |
| ピン 14 | RC5 — PORTC digital I/O bit 5 |
| ピン 15 | RC6 — PORTC digital I/O bit 6 / TX |
| ピン 16 | RC7 — PORTC digital I/O bit 7 / RX |
| ピン 17 | RD0 — PORTD digital I/O bit 0 |
| ピン 18 | RD1 — PORTD digital I/O bit 1 |
| ピン 19 | RD2 — PORTD digital I/O bit 2 |
| ピン 20 | RD3 — PORTD digital I/O bit 3 |
| ピン 21 | RD4 — PORTD digital I/O bit 4 |
| ピン 22 | RD5 — PORTD digital I/O bit 5 |
| ピン 23 | RD6 — PORTD digital I/O bit 6 |
| ピン 24 | RD7 — PORTD digital I/O bit 7 |
| ピン 25 | VSS — Digital ground |
| ピン 26 | VDD — Digital supply voltage |
| ピン 27 | RE0 — PORTE digital I/O bit 0 |
| ピン 28 | RE1 — PORTE digital I/O bit 1 |
| ピン 29 | RE2 — PORTE digital I/O bit 2 |
| ピン 30 | RE3 — PORTE digital I/O bit 3 |
| ピン 31 | RE4 — PORTE digital I/O bit 4 |
| ピン 32 | RE5 — PORTE digital I/O bit 5 |
| ピン 33 | RE6 — PORTE digital I/O bit 6 |
| ピン 34 | RE7 — PORTE digital I/O bit 7 |
| ピン 35 | AVDD — Analog supply voltage |
| ピン 36 | AVSS — Analog ground |
| ピン 37 | RA0 — PORTA digital I/O / analog input AN0 |
| ピン 38 | RA1 — PORTA digital I/O / analog input AN1 |
| ピン 39 | RA2 — PORTA digital I/O / analog input AN2 |
| ピン 40 | RA3 — PORTA digital I/O / analog input AN3 / VREF+ |
| ピン 41 | RA4 — PORTA digital I/O / analog input AN4 |
| ピン 42 | RA5 — PORTA digital I/O / analog input AN5 / VREF- |
| ピン 43 | RA6 — PORTA digital I/O bit 6 / oscillator |
| ピン 44 | RA7 — PORTA digital I/O bit 7 / oscillator |
| ピン 45 | VSS — Digital ground |
| ピン 46 | VDD — Digital supply voltage |
| ピン 47 | RF0 — PORTF digital I/O bit 0 |
| ピン 48 | RF1 — PORTF digital I/O bit 1 / analog AN6 |
| ピン 49 | RF2 — PORTF digital I/O bit 2 |
| ピン 50 | RF3 — PORTF digital I/O bit 3 / analog AN8 |
| ピン 51 | RF4 — PORTF digital I/O bit 4 / analog AN9 |
| ピン 52 | RF5 — PORTF digital I/O bit 5 / analog AN10 |
| ピン 53 | RF6 — PORTF digital I/O bit 6 / analog AN11 |
| ピン 54 | RF7 — PORTF digital I/O bit 7 |
| ピン 55 | RG0 — PORTG digital I/O bit 0 |
| ピン 56 | RG1 — PORTG digital I/O bit 1 |
| ピン 57 | RG2 — PORTG digital I/O bit 2 |
| ピン 58 | RG3 — PORTG digital I/O bit 3 |
| ピン 59 | RG4 — PORTG digital I/O bit 4 |
| ピン 60 | MCLR — Master clear / reset input (active low) |
| ピン 61 | RB0 — PORTB digital I/O bit 0 / external interrupt 0 |
| ピン 62 | RB1 — PORTB digital I/O bit 1 / external interrupt 1 |
| ピン 63 | VSS — Digital ground |
| ピン 64 | VDD — Digital supply voltage |
主な用途
PIC18F67K22-I/PTRSL の用途: 6 件s: Capacitive Touch HMI, Battery-Powered Remote Sensor, Industrial Control Panel, USB HID Peripheral, Home Appliance with LCD Display, Automotive Body / Comfort Module.
Capacitive Touch HMI
The PIC18F67K22-I/PTRSL's integrated CTMU (Charge Time Measurement Unit) provides hardware-assisted capacitive touch sensing that measures sub-picofarad capacitance changes with a single calibration reference current. The 12-bit ADC with up to 16 channels can scan a touch matrix of 16 electrodes in a few milliseconds, while the 128 KB Flash comfortably holds a touch library plus application firmware. With 53 I/O pins on the 64-pin TQFP, designers can wire 4x4 or 5x5 touch matrices plus LEDs, a display interface, and a host UART without external GPIO expanders. The nanoWatt XLP sleep mode drops the MCU to roughly 20 nA between scans, enabling battery-powered remote controls and wireless touch panels that wake on a single electrode interrupt.
おすすめ
Battery-Powered Remote Sensor
The PIC18F67K22-I/PTRSL nanoWatt XLP technology delivers sleep currents of approximately 20 nA with RAM retention, enabling multi-year battery life on a single 3V coin cell when the MCU wakes every few seconds to read a sensor and transmit via UART or SPI. The 1.8-5.5V supply range supports direct Li-Ion, two-AA, or regulated 3.3V rails. The 12-bit ADC and CTMU handle resistive bridge sensors, thermistors, and capacitive humidity elements without an external signal chain. The 128 KB Flash allows on-chip protocol stacks for Sub-GHz transceivers, and the 64-pin TQFP footprint fits standard sensor-node PCB reference designs from Microchip application notes.
おすすめ
Industrial Control Panel
The PIC18F67K22-I/PTRSL suits industrial control panels that require 12-bit measurement of multiple analog signals (temperature, pressure, current) plus a user interface of buttons, LEDs, and a character LCD. The 12-bit ADC with up to 16 channels handles 4-20 mA loop inputs via burden resistors and direct thermocouple/thermistor digitization with proper signal conditioning. The two EUSARTs and two MSSP ports allow simultaneous RS-485 Modbus communication and SPI-connected peripherals such as digital potentiometers or EEPROM. The -40C to +85C industrial temperature range covers most factory-floor enclosures, and the 64-pin TQFP offers 53 I/O lines for keypad matrix, LED drivers, and discrete control outputs.
おすすめ
USB HID Peripheral
When paired with an external USB transceiver, the PIC18F67K22-I/PTRSL can act as a USB Full-Speed HID peripheral such as a keyboard, mouse, custom joystick, or measurement dongle. The 128 KB Flash and 4 KB RAM fit USB HID class drivers plus application logic, and the 12-bit ADC can digitize analog sensors for HID telemetry reports. Two MSSP ports provide SPI for external peripherals and I2C for user-interface devices such as OLED displays. The 64-pin TQFP footprint simplifies PCB layout by exposing the full peripheral set on a single, easily-routed 0.5 mm pitch package.
おすすめ
Home Appliance with LCD Display
The PIC18F67K22 family drives segment LCDs through its integrated LCD controller peripheral (on die variants that include it), reducing BOM cost for washing machines, microwave ovens, and thermostats that need a multi-digit display. The 12-bit ADC reads temperature sensors, level probes, and motor current sense, while the multiple PWM modules drive motor or heater elements via MOSFET drivers. The 128 KB Flash comfortably fits a UI library, real-time clock, and safety state machine. The 64-pin TQFP keeps the design on a single PCB layer with the display tail connected via a single FPC.
おすすめ
Automotive Body / Comfort Module
The PIC18F67K22 family is widely used in non-safety automotive body and comfort modules such as seat controllers, mirror adjusters, and ambient lighting drivers. The -40C to +85C industrial grade covers cabin environments, and the K22 family has automotive-qualified E-grade (-40C to +125C) variants on the same die. The 12-bit ADC reads switch positions and lighting feedback, the PWM modules drive LED strings, and the EUSARTs/MSSP handle LIN bus or CAN-with-external-transceiver networking. The 64-pin TQFP supports the higher I/O count needed for multi-channel lighting and motor control.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: PIC18F67K22-I/PTRSL — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | PIC18F67K22-I/PT | PIC18F67K22T-I/PTRSL | PIC18F67K22-E/PT | PIC18F66K22-I/PT | PIC18F66K22-I/MRRSL |
|---|---|---|---|---|---|---|
| Package | 64-pin TQFP (10x10 mm) | 64-pin TQFP (10x10 mm) - same | 64-pin TQFP (10x10 mm) - same | 64-pin TQFP (10x10 mm) - same | 64-pin TQFP (10x10 mm) - same | 64-pin TQFP (10x10 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 128 KB | 128 KB | 128 KB | 128 KB | 64 KB | 64 KB |
| RAM | 4 KB | 4 KB | 4 KB | 4 KB | 4 KB | 4 KB |
| Data EEPROM | 1 KB | 1 KB | 1 KB | 1 KB | 1 KB | 1 KB |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +125C | -40C to +85C | -40C to +85C |
| CTMU Peripheral | Yes | Yes | Yes | Yes | Yes | Yes |
| Packaging Format | Tape & Reel | Tray | Tape & Reel | Tray | Tray | Tape & Reel |
主な差別化要因
- Largest Flash in the 64-pin PIC18 K22 family （vs PIC18F66K22-I/PT)
- Industrial -40C to +85C grade matches mainstream commercial/industrial designs （vs PIC18F67K22-E/PT)
- Drop-in tray equivalent for prototype builds （vs PIC18F67K22-I/PT)
設計ノート
Estimated: at VDD = 5.0V, the PIC18F67K22 active current is approximately 8 mA at 64 MHz per the family datasheet, yielding roughly 0.25 W in steady-state. Decouple VDD/VSS pairs with a 100 nF ceramic capacitor within 5 mm of each supply pin plus a 10 uF bulk capacitor on the rail; the AVDD/AVSS pair (pins 35/36 on the 64-pin TQFP) requires its own 100 nF + 10 uF to keep ADC noise below 1 LSB at full 12-bit conversion rate.
Route the MCLR reset line (pin 60) with a 10 kohm pull-up to VDD and place a 100 nF capacitor from MCLR to ground close to the pin for noise immunity. Keep the ICSP clock and data lines (RB6/RB7) away from high-frequency switching traces to prevent programming glitches; avoid long parallel runs with PWM outputs.
Do not leave any I/O pin floating - configure all unused pins as outputs driving low to minimize quiescent current in nanoWatt XLP sleep mode. The CTMU requires calibration of the reference current using a known capacitor before accurate touch readings can be obtained; consult Microchip application note AN1250 for the CTMU calibration procedure.
コンプライアンス情報
Industrial temperature grade -40C to +85C. AEC-Q100 automotive qualification not applicable to the -I suffix; use PIC18F67K22-E (extended temp grade) or PIC18F K22 Q-grade automotive variants for vehicle applications.
