PIC18F8628T-I/PT - 8-Bit 40MHz 96KB Flash MCU | Microchip | TQFP-80
部品番号: PIC18F8628T-I/PT ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $9.85 | $9.85 |
| 10 | $9.1 | $91.00 |
| 100 | $8.45 | $845.00 |
| 500 | $7.8 | $3,900.00 |
| 1,000 | $7.1 | $7,100.00 |
| 3,000 | $6.4 | $19,200.00 |
PIC18F8628T-I/PT 概要
A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, volatile data RAM, and a configurable set of peripheral interfaces. The PIC18 family represents Microchip's 8-bit RISC architecture, positioned in the hierarchy: PIC18 -> 8-bit MCU -> microcontroller -> embedded processor -> semiconductor. The "F" prefix designates Flash program memory, enabling in-circuit reprogramming via ICSP, while the LF variants extend operation to lower supply voltages.
Key features of the PIC18F8628T-I/PT include 96 KB of self-programmable Flash, 4 KB of general-purpose RAM, 1 KB of data EEPROM for non-volatile parameter storage, a 12-bit (12B) ADC, and four serial ports comprising dual MSSP (I2C/SPI) plus dual EUSART (LIN-capable). Additional capabilities include nanoWatt power management for low-power modes, an external memory bus capable of addressing up to 2 MB, and 70+ digital I/O lines on the 80-pin TQFP package.
Architecturally, the PIC18F8628 employs an enhanced Harvard RISC core with 200 ns instruction cycle, hardware multiplier, and 31-level hardware stack. This 8-bit architecture delivers deterministic interrupt latency and strong C-compiler (MPLAB XC8) support, while the 12-bit ADC and dual analog comparators simplify mixed-signal sensing tasks. The peripheral set is engineered for simultaneous communication with multiple buses.
Typical applications include industrial control panels, automotive body and LIN-bus nodes, large-format user-interface boards, and home appliances that benefit from connectivity plus storage. The wide peripheral mix is equally well-suited to instrumentation front-ends and point-of-sale terminals with display/keypad subsystems.
When designing with this device, allocate adequate decoupling (100 nF + 10 uF) adjacent to every VDD/VSS pair, route the 40 MHz crystal traces short and guarded, and respect the 80-pin TQFP pad geometry (12x12 mm body, 0.5 mm pitch) for manufacturability. The ICSP pins (PGECx/PGEDx) must remain accessible for field updates.
This page synthesizes distributor pricing, drop-in same-package alternatives sourced from Microchip's PIC18 family, and PCB-level design notes not consolidated in the manufacturer datasheet.
ドロップイン代替品: PIC18F8628T-I/PT — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: PIC18F8628T-I/PT （同一形状・フットプリント） — 相違点: Core Architecture, Package, Mounting Type, I/O Pins, ADC.
クイック比較ツール — 並列比較する代替部品を選択:
PIC18F8628-I/PT
✅ ドロップイン✓ 在庫あり
$9.95 / 個
データシートを見る →PIC18LF8628T-I/PT
✅ ドロップイン✓ 在庫あり
$5.46 / 個
データシートを見る →PIC18F8525T-I/PT
✅ ドロップイン✓ 在庫あり
$5.12 / 個
データシートを見る →PIC18F8520T-I/PT
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
PIC18F8627T-E/PT
✅ ドロップイン✓ 在庫あり
$7.2 / 個
データシートを見る →PIC18F8722T-I/PT
✅ ドロップイン📋 参考代替品（カタログ未掲載）
PIC18F8628T-I/PT 最大定格＆電気的特性
| Core Architecture | PIC 8-bit RISC (PIC18) |
| Program Memory Type | Flash (self-programmable) |
| Program Memory Size | 96 KB (48K x 16) |
| Data RAM | 4 KB |
| Data EEPROM | 1 KB (1024 bytes) |
| Maximum CPU Frequency | 40 MHz |
| Instruction Cycle | 200 ns @ 40 MHz |
| ADC Resolution | 12-bit (12B) |
| I/O Pins | 70+ (80-pin package) |
| Serial Interfaces | 2x MSSP (I2C/SPI), 2x EUSART (LIN-capable) |
| パッケージ | 80-pin TQFP (12x12 mm, 0.5 mm pitch) |
| Temperature Grade | Industrial (-40C to +85C), 'I' suffix |
| 実装タイプ | Surface Mount |
| RoHS ステータス | Compliant (per Microchip product page) |
| Power-Save Feature | nanoWatt low-power modes |
| External Memory Bus | Yes (up to 2 MB addressable) |
PIC18F8628T-I/PT ピン構成
| ピン 1 | RH0/AN12 — Digital I/O RH0 or analog input AN12 |
| ピン 2 | RH1/AN13 — Digital I/O RH1 or analog input AN13 |
| ピン 3 | RH2/AN14 — Digital I/O RH2 or analog input AN14 |
| ピン 4 | RH3/AN15 — Digital I/O RH3 or analog input AN15 |
| ピン 5 | RH4/AN16 — Digital I/O RH4 or analog input AN16 |
| ピン 6 | RH5/AN17 — Digital I/O RH5 or analog input AN17 |
| ピン 7 | RH6/AN18 — Digital I/O RH6 or analog input AN18 |
| ピン 8 | RH7/AN19 — Digital I/O RH7 or analog input AN19 |
| ピン 9 | VSS — Ground reference |
| ピン 10 | VDD — Positive supply (5 V nominal) |
| ピン 11 | AVSS — Analog ground |
| ピン 12 | AVDD — Analog supply (5 V nominal) |
| ピン 13 | RA0/AN0 — Digital I/O RA0 or analog input AN0 |
| ピン 14 | RA1/AN1 — Digital I/O RA1 or analog input AN1 |
| ピン 15 | RA2/AN2 — Digital I/O RA2 or analog input AN2 |
| ピン 16 | RA3/AN3 — Digital I/O RA3 or analog input AN3 |
| ピン 17 | RA4/AN4 — Digital I/O RA4 or analog input AN4 |
| ピン 18 | RA5/AN5 — Digital I/O RA5 or analog input AN5 |
| ピン 19 | RA6 — Digital I/O RA6 |
| ピン 20 | RA7 — Digital I/O RA7 |
| ピン 21 | VSS — Ground reference |
| ピン 22 | VDD — Positive supply (5 V nominal) |
| ピン 23 | RB0/INT0 — Digital I/O RB0 or external interrupt 0 |
| ピン 24 | RB1/INT1 — Digital I/O RB1 or external interrupt 1 |
| ピン 25 | RB2/INT2 — Digital I/O RB2 or external interrupt 2 |
| ピン 26 | RB3/INT3 — Digital I/O RB3 or external interrupt 3 |
| ピン 27 | RB4 — Digital I/O RB4 |
| ピン 28 | RB5 — Digital I/O RB5 |
| ピン 29 | RB6/PGC — Digital I/O RB6 or ICSP clock |
| ピン 30 | RB7/PGD — Digital I/O RB7 or ICSP data |
| ピン 31 | VSS — Ground reference |
| ピン 32 | VDD — Positive supply (5 V nominal) |
| ピン 33 | RC0 — Digital I/O RC0 |
| ピン 34 | RC1 — Digital I/O RC1 |
| ピン 35 | RC2 — Digital I/O RC2 |
| ピン 36 | RC3 — Digital I/O RC3 |
| ピン 37 | RC4 — Digital I/O RC4 |
| ピン 38 | RC5 — Digital I/O RC5 |
| ピン 39 | RC6/TX1 — Digital I/O RC6 or EUSART1 TX |
| ピン 40 | RC7/RX1 — Digital I/O RC7 or EUSART1 RX |
| ピン 41 | VSS — Ground reference |
| ピン 42 | VDD — Positive supply (5 V nominal) |
| ピン 43 | RD0 — Digital I/O RD0 |
| ピン 44 | RD1 — Digital I/O RD1 |
| ピン 45 | RD2 — Digital I/O RD2 |
| ピン 46 | RD3 — Digital I/O RD3 |
| ピン 47 | RD4 — Digital I/O RD4 |
| ピン 48 | RD5 — Digital I/O RD5 |
| ピン 49 | RD6 — Digital I/O RD6 |
| ピン 50 | RD7 — Digital I/O RD7 |
| ピン 51 | VSS — Ground reference |
| ピン 52 | VDD — Positive supply (5 V nominal) |
| ピン 53 | RE0/RD — Digital I/O RE0 or external memory bus read strobe |
| ピン 54 | RE1/WR — Digital I/O RE1 or external memory bus write strobe |
| ピン 55 | RE2/CS — Digital I/O RE2 or external memory bus chip select |
| ピン 56 | RE3 — Digital I/O RE3 |
| ピン 57 | RE4 — Digital I/O RE4 |
| ピン 58 | RE5 — Digital I/O RE5 |
| ピン 59 | RE6 — Digital I/O RE6 |
| ピン 60 | RE7 — Digital I/O RE7 |
| ピン 61 | VSS — Ground reference |
| ピン 62 | VDD — Positive supply (5 V nominal) |
| ピン 63 | RF0/AN5 — Digital I/O RF0 or analog input AN5 (shared mapping per family) |
| ピン 64 | RF1/AN6 — Digital I/O RF1 or analog input AN6 |
| ピン 65 | RF2/AN7 — Digital I/O RF2 or analog input AN7 |
| ピン 66 | RF3/AN8 — Digital I/O RF3 or analog input AN8 |
| ピン 67 | RF4/AN9 — Digital I/O RF4 or analog input AN9 |
| ピン 68 | RF5/AN10 — Digital I/O RF5 or analog input AN10 |
| ピン 69 | RF6/AN11 — Digital I/O RF6 or analog input AN11 |
| ピン 70 | RF7 — Digital I/O RF7 |
| ピン 71 | VSS — Ground reference |
| ピン 72 | VDD — Positive supply (5 V nominal) |
| ピン 73 | RG0 — Digital I/O RG0 |
| ピン 74 | RG1 — Digital I/O RG1 |
| ピン 75 | RG2 — Digital I/O RG2 |
| ピン 76 | RG3 — Digital I/O RG3 |
| ピン 77 | RG4 — Digital I/O RG4 |
| ピン 78 | MCLR — Master clear reset (active low) |
| ピン 79 | OSC1/CLKI — Crystal oscillator input or external clock input |
| ピン 80 | OSC2/CLKO — Crystal oscillator output or clock output |
主な用途
PIC18F8628T-I/PT の用途: 6 件s: Industrial Control Panels, Automotive Body and LIN-Bus Nodes, Large-Format HMI and Display Boards, Home Appliance Controllers, Instrumentation and Data-Acquisition Front-Ends, Point-of-Sale Terminals and Printers.
Industrial Control Panels
The PIC18F8628T-I/PT is well suited for industrial control panels that aggregate multiple sensor inputs and drive HMI displays. Its 12-bit ADC resolves analog signals from pressure transducers, temperature probes, and current shunts with 1.6 mV LSB at 5 V VREF, while the 4 KB RAM buffers GUI screen data and command queues. With 2x MSSP plus 2x LIN-capable EUSART, the MCU concurrently interfaces to SPI displays, I2C EEPROM, a LIN keypad node, and an RS-485 mainboard link - no external bus multiplexer required.
おすすめ
Automotive Body and LIN-Bus Nodes
In automotive body-control modules and LIN sub-nodes, the PIC18F8628T-I/PT's two LIN-capable EUSARTs manage master/slave LIN 1.x/2.x communication without external transceivers beyond the LIN phy. The 70+ I/O lines directly drive window lifters, mirror motors, LED matrix indicators, and switch matrices, while the 96 KB Flash accommodates AUTOSAR-style application layers and bootloader slots. The nanoWatt power-management set supports CAN/LIN wake-up from sleep at <5 uA, critical for quiescent-current budgets under 100 uA.
おすすめ
Large-Format HMI and Display Boards
Graphical HMI boards with TFT-LCD panels and capacitive touch benefit from the PIC18F8628T-I/PT's combination of high pin count, large Flash, and dual MSSP channels. One MSSP drives the SPI TFT controller at up to 10 MHz, the second MSSP polls an I2C touch controller, while the dual EUSARTs handle RS-232 service-port and RS-485 PLC backhaul in parallel. The 1 KB data EEPROM stores non-volatile display calibration and runtime counters, and the 4 KB RAM holds frame buffers for menu graphics without external SRAM.
おすすめ
Home Appliance Controllers
Washing machines, dishwashers, and induction cooktops rely on the PIC18F8628T-I/PT for its mix of connectivity and motor-control-friendly timers. The MSSP channels talk to LED-segment or character-LCD front-panel modules; the EUSARTs communicate with inverter boards, sensor hubs, and Wi-Fi modules; and the 12-bit ADC reads NTC temperature sensors, zero-cross detectors, and current-sensing transformers. The 96 KB Flash is more than enough for state-machine firmware plus a UI library, and nanoWatt idle cuts standby power to meet energy-rating rules.
おすすめ
Instrumentation and Data-Acquisition Front-Ends
Bench-top instruments and modular data-acquisition front-ends leverage the PIC18F8628T-I/PT's 12-bit ADC, large memory, and multiple serial ports for sensor aggregation. The dual EUSARTs route SCPI command traffic to a host PC while passing measurement bursts to a downstream logger; the MSSPs daisy-chain SPI ADCs and DACs for self-calibration loops. The 1 KB EEPROM stores per-channel calibration constants, while the 96 KB Flash fits embedded calibration routines and digital-filter libraries for transducer linearization.
おすすめ
Point-of-Sale Terminals and Printers
POS terminals and receipt printers use the PIC18F8628T-I/PT to manage keypad scanning, customer-facing displays, mag-stripe or NFC readers, and thermal-printer head control. The 70+ I/O lines directly multiplex the keypad matrix, LCD backlight PWM, and thermal-printer stepper motor phases without external logic. One MSSP drives the NFC controller over SPI; one EUSART connects to the LAN-isolation board; and the 4 KB RAM buffers transaction records before forwarding to the secure element via the second MSSP.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: PIC18F8628T-I/PT — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | PIC18F8628-I/PT | PIC18LF8628T-I/PT | PIC18F8525T-I/PT | PIC18F8520T-I/PT | PIC18F8627T-E/PT | PIC18F8722T-I/PT |
|---|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TQFP-80 (12x12 mm) | TQFP-80 (12x12 mm) - same | TQFP-80 (12x12 mm) - same | TQFP-80 (12x12 mm) - same | TQFP-80 (12x12 mm) - same | TQFP-80 (12x12 mm) - same | TQFP-80 (12x12 mm) - same |
| Program Flash | 96 KB | 96 KB | 96 KB | 48 KB (-50%) | 32 KB (-67%) | 96 KB | 128 KB (+33%) |
| Data RAM | 4 KB | 4 KB | 4 KB | 3.8 KB | 2 KB | 4 KB | 4 KB |
| Data EEPROM | 1 KB | 1 KB | 1 KB | 1 KB | 1 KB | 1 KB | 1 KB |
| Max CPU Frequency | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 40 MHz |
| Operating Voltage | 4.2 V to 5.5 V (F series) | 4.2 V to 5.5 V | 2.0 V to 3.6 V (LF series) | 4.2 V to 5.5 V | 4.2 V to 5.5 V | 4.2 V to 5.5 V | 4.2 V to 5.5 V |
| Temperature Grade | -40C to +85C (Industrial) | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +125C (Extended) | -40C to +85C |
| Serial Ports | 2x MSSP (I2C/SPI), 2x EUSART (LIN) | 2x MSSP + 2x EUSART | 2x MSSP + 2x EUSART | 2x MSSP + 2x EUSART (subset of pins) | 2x MSSP + 2x EUSART | 2x MSSP + 2x EUSART | 2x MSSP + 2x EUSART |
主な差別化要因
- Higher Flash density at same pin count （vs PIC18F8525T-I/PT)
- Industrial temperature grade for embedded designs （vs PIC18F8627T-E/PT)
- 5 V native operation (vs 3.3 V LF variant) （vs PIC18LF8628T-I/PT)
設計ノート
Estimated: At Vdd = 5 V, 40 MHz active current is approximately 16 mA (typical) per family data; total board-level decoupling must include one 100 nF ceramic per VDD/VSS pin pair plus a bulk 10 uF tantalum near the MCU. Place the 100 nF caps within 3 mm of each supply pin to suppress switching transients from the EUSART and MSSP peripherals. The MCLR pin requires its own 10 kohm pull-up and a 100 nF decoupling cap to ground for stable reset behavior.
The 80-pin TQFP (12x12 mm, 0.5 mm pitch) demands a 4-layer PCB with continuous ground plane beneath the package to provide thermal dissipation and EMI shielding. All VDD/VSS pins must be stitched to inner planes with 0.3 mm vias placed within 1 mm of each pad. Route the 40 MHz crystal traces (OSC1/OSC2) as short, matched-length pairs under 10 mm, and guard them with a ground ring on both sides to prevent radiated-clock injection into adjacent analog inputs.
Do not exceed the absolute maximum Vdd of 7.5 V on any F-series pin; even brief transients from inductive loads can latch-up the device. The ICSP pins (RB6/PGC and RB7/PGD) must remain accessible in production - do not strap them permanently to VDD or GND, as this disables in-field firmware updates. For LIN applications, configure the EUSART baud-rate generator for 16x oversampling at the chosen baud; failure to do so produces framing errors at high bus loads.
コンプライアンス情報
RoHS and lead-free per Microchip product page. The -I (industrial) temperature grade is not AEC-Q100 qualified; for AEC-Q100 automotive applications, choose the PIC18F8627T-E/PT extended-grade variant.
