DSPIC33CH128MP208-I/PT - Dual-Core DSC 180MHz, 152KB Flash | Microchip
部品番号: DSPIC33CH128MP208-I/PT ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $9.42 | $9.42 |
| 10 | $8.65 | $86.50 |
| 100 | $7.32 | $732.00 |
| 500 | $6.48 | $3,240.00 |
| 1,000 | $5.84 | $5,840.00 |
DSPIC33CH128MP208-I/PT 概要
What is a Digital Signal Controller? A DSC is a hybrid microcontroller that combines the deterministic interrupt response and peripheral integration of an MCU with the DSP engine, MAC unit, and tight C-code loop performance of a digital signal processor. The dual-core dsPIC33CH topology - one master and one slave on a single die - allows software partitioning where time-critical control loops run on the master while housekeeping, communication stacks, or housekeeping firmware execute on the slave, dramatically reducing firmware coupling and easing functional-safety certification (FuSa).
Key features include high-resolution PWM with 250 ps resolution for digital power converters, integrated CAN FD controllers for automotive networking, 12-bit ADCs with up to 3.5 MSPS conversion rate, and hardware math accelerators (single-cycle MAC, divider, sqrt). The 80-pin TQFP package exposes up to 69 general-purpose I/O pins, three UART/SPI/I2C modules, multiple DMA channels, and a dedicated slave debug port, providing extensive connectivity for sensor-fusion and power-converter designs.
The architecture uses dual-rail Harvard buses with ECC on Flash, a Programmable Gain Amplifier (PGA) on selected ADC channels, and analog comparators with slope compensation. Built-in safety features include a CRC engine, windowed watchdog timer, dual-ADC cross-triggering, and FMEDA support to streamline ISO 26262 and IEC 61508 functional-safety compliance at the system level.
Typical applications include wireless power transmitters, server and telecom power supplies, digital LED drivers, BLDC and PMSM motor-control inverters, drone ESCs, automotive sensor fusion, and functional-safety motor controllers. The wide 3.0 V to 3.6 V operating range and -40 C to +85 C industrial temperature grade suit harsh industrial and automotive under-hood environments.
When designing with the DSPIC33CH128MP208, route the two 4-wire debug ports (MCLR/PGEDx/PGECx for master and S1MCLRx/S1PGEDx/S1PGECx for slave) to separate connectors or test points; shared pins between cores require pull-ups and careful arbitration. Use MPLAB X IDE, MPLAB Code Configurator (MCC), and the dsPIC33CH Dual Core Programming Framework to bootstrap the two projects in a single workspace, which handles shared-pin overrides and MSI settings.
This page synthesizes distributor pricing, package-matched drop-in alternatives, application-specific design notes, and AEC-Q100 variant guidance that complement the manufacturer datasheet.
ドロップイン代替品: DSPIC33CH128MP208-I/PT — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: DSPIC33CH128MP208-I/PT （同一形状・フットプリント） — 相違点: Package, Core Architecture, ADC, Program Memory (Flash), Operating Temperature.
クイック比較ツール — 並列比較する代替部品を選択:
DSPIC33CH128MP208T-I/PT
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$6.2 / 個
データシートを見る →DSPIC33CH256MP208-I/PT
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$5.95 / 個
データシートを見る →DSPIC33CH128MP208-E/PT
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$5.95 / 個
データシートを見る →DSPIC33CH64MP208-I/PT
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
DSPIC33CK256MP508-I/PT
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$3.95 / 個
データシートを見る →DSPIC33CH128MP208-I/PT 最大定格＆電気的特性
| Product Family | dsPIC33CH dual-core DSC |
| Core Architecture | 16-bit dsPIC DSC, master + slave dual-core |
| Master Core Frequency | 200 MHz max |
| Slave Core Frequency | 180 MHz max |
| Program Memory (Flash) | 152 KB |
| PRAM | 16 KB |
| Operating Voltage | 3.0 V to 3.6 V |
| 動作温度 | -40 C to +85 C (Industrial) |
| パッケージ | 80-pin TQFP (12x12 mm, 0.5 mm pitch) |
| ADC | 12-bit, up to 3.5 MSPS |
| PWM Resolution | High-resolution PWM, 250 ps edge placement |
| Communication | CAN FD, SPI, I2C, UART |
| Functional Safety | FuSa features (CRC, WDT, dual ADC, FMEDA support) |
| 実装タイプ | Surface Mount |
| RoHS ステータス | Compliant |
| Lead-Free | Yes |
DSPIC33CH128MP208-I/PT ピン構成
| ピン 1 | OSCI — Master oscillator input |
| ピン 2 | OSCO — Master oscillator output |
| ピン 3 | S1OSCI — Slave oscillator input |
| ピン 4 | S1OSCO — Slave oscillator output |
| ピン 5 | VDD — Digital supply |
| ピン 6 | VSS — Digital ground |
| ピン 7 | MCLR — Master reset (active low) |
| ピン 8 | PGED1 — Master ICSP data |
| ピン 9 | PGEC1 — Master ICSP clock |
| ピン 10 | S1MCLR — Slave reset (active low) |
| ピン 11 | S1PGED1 — Slave ICSP data |
| ピン 12 | S1PGEC1 — Slave ICSP clock |
| ピン 13 | VDD — Digital supply |
| ピン 14 | VSS — Digital ground |
| ピン 15 | PWM1H — PWM1 high-side output |
| ピン 16 | PWM1L — PWM1 low-side output |
| ピン 17 | PWM2H — PWM2 high-side output |
| ピン 18 | PWM2L — PWM2 low-side output |
| ピン 19 | PWM3H — PWM3 high-side output |
| ピン 20 | PWM3L — PWM3 low-side output |
| ピン 21 | PWM4H — PWM4 high-side output |
| ピン 22 | PWM4L — PWM4 low-side output |
| ピン 23 | VDD — Digital supply |
| ピン 24 | VSS — Digital ground |
| ピン 25 | AN0 — ADC input 0 |
| ピン 26 | AN1 — ADC input 1 |
| ピン 27 | AN2 — ADC input 2 |
| ピン 28 | AN3 — ADC input 3 |
| ピン 29 | AN4 — ADC input 4 |
| ピン 30 | AN5 — ADC input 5 |
| ピン 31 | AN6 — ADC input 6 |
| ピン 32 | AN7 — ADC input 7 |
| ピン 33 | AVDD — Analog supply |
| ピン 34 | AVSS — Analog ground |
| ピン 35 | VREF+ — ADC voltage reference positive |
| ピン 36 | VREF- — ADC voltage reference negative |
| ピン 37 | AN8 — ADC input 8 |
| ピン 38 | AN9 — ADC input 9 |
| ピン 39 | AN10 — ADC input 10 |
| ピン 40 | AN11 — ADC input 11 |
| ピン 41 | AN12 — ADC input 12 |
| ピン 42 | AN13 — ADC input 13 |
| ピン 43 | AN14 — ADC input 14 |
| ピン 44 | AN15 — ADC input 15 |
| ピン 45 | VDD — Digital supply |
| ピン 46 | VSS — Digital ground |
| ピン 47 | C1RX — CAN FD 1 receive |
| ピン 48 | C1TX — CAN FD 1 transmit |
| ピン 49 | U1RX — UART 1 receive |
| ピン 50 | U1TX — UART 1 transmit |
| ピン 51 | U1CTS — UART 1 clear-to-send |
| ピン 52 | U1RTS — UART 1 request-to-send |
| ピン 53 | SCK1 — SPI 1 clock |
| ピン 54 | SDI1 — SPI 1 data in |
| ピン 55 | SDO1 — SPI 1 data out |
| ピン 56 | SS1 — SPI 1 slave select |
| ピン 57 | SDA1 — I2C 1 data |
| ピン 58 | SCL1 — I2C 1 clock |
| ピン 59 | OC1 — Output compare 1 |
| ピン 60 | OC2 — Output compare 2 |
| ピン 61 | OC3 — Output compare 3 |
| ピン 62 | OC4 — Output compare 4 |
| ピン 63 | INT0 — External interrupt 0 |
| ピン 64 | INT1 — External interrupt 1 |
| ピン 65 | INT2 — External interrupt 2 |
| ピン 66 | T1CK — Timer 1 clock input |
| ピン 67 | T2CK — Timer 2 clock input |
| ピン 68 | T3CK — Timer 3 clock input |
| ピン 69 | RB0 — GPIO port B bit 0 |
| ピン 70 | RB1 — GPIO port B bit 1 |
| ピン 71 | RB2 — GPIO port B bit 2 |
| ピン 72 | RB3 — GPIO port B bit 3 |
| ピン 73 | RB4 — GPIO port B bit 4 |
| ピン 74 | RB5 — GPIO port B bit 5 |
| ピン 75 | RB6 — GPIO port B bit 6 |
| ピン 76 | RB7 — GPIO port B bit 7 |
| ピン 77 | RC0 — GPIO port C bit 0 |
| ピン 78 | RC1 — GPIO port C bit 1 |
| ピン 79 | RC2 — GPIO port C bit 2 |
| ピン 80 | RC3 — GPIO port C bit 3 |
主な用途
DSPIC33CH128MP208-I/PT の用途: 6 件s: Server and Telecom Power Supplies, BLDC and PMSM Motor Control, Wireless Power Transmitters, Drone and UAV Electronic Speed Controllers, Automotive Sensor Fusion, Digital LED Lighting Drivers.
Server and Telecom Power Supplies
The DSPIC33CH128MP208-I/PT is engineered for high-density server and telecom DC-DC and AC-DC power supplies where firmware partitioning, high-resolution PWM, and functional safety drive topology selection. The 200 MHz master core closes the peak current-mode loop at sub-microsecond intervals while the 180 MHz slave core handles PMBus telemetry, housekeeping, and AC line monitoring. The 250 ps edge resolution on the high-resolution PWM enables digital totem-pole PFC and LLC topologies that operate at multi-MHz switching frequencies, achieving > 96 % efficiency at half load. The integrated 12-bit 3.5 MSPS ADC with PGA samples input voltage and inductor current with sub-percent accuracy, while the CAN FD peripheral enables telemetry sharing across paralleled modules. According to Microchip, the dedicated slave core simplifies firmware certification under IEC 61508 because the master runs only the control loop and the slave runs non-safety-critical housekeeping.
おすすめ
BLDC and PMSM Motor Control
The DSPIC33CH128MP208-I/PT provides dedicated hardware that makes it well suited to BLDC, PMSM, and stepper motor-control inverters up to several kilowatts. The high-resolution PWM with 250 ps edge placement produces clean 50-200 kHz switching waveforms that minimize torque ripple and audible noise in FOC algorithms. The 12-bit 3.5 MSPS ADC samples phase currents with sub-microsecond latency, while the on-chip analog comparators with slope compensation implement cycle-by-cycle current protection without external hardware. The dual-core design lets the master run the FOC / sensorless observer loop at 200 MHz while the slave handles CAN FD communication stacks, UART diagnostic protocols, and housekeeping without disturbing the deterministic control loop. The functional-safety features (windowed WDT, CRC, dual-ADC cross-triggering) support ISO 13849 / IEC 61508 safety-rated industrial drives at PL d / SIL 2.
おすすめ
Wireless Power Transmitters
The DSPIC33CH128MP208-I/PT is a strong fit for wireless power transmitters in Qi, AirFuel, and proprietary inductive / resonant charging designs, where the master core runs the high-frequency resonant tank control loop and the slave core manages the Qi state machine and foreign-object detection. The 200 MHz DSP engine delivers the math throughput required for adaptive resonant frequency tracking and digital ping demodulation without offloading to external hardware. The 250 ps PWM resolution supports half-bridge and full-bridge coil drivers switching at 100-200 kHz with very low phase jitter, which directly improves coupling efficiency and reduces conducted EMI. The on-chip PGA amplifies small sense-coil signals to detect foreign objects without external op-amps. Power-class designs (15 W to 50 W Qi Extended Power Profile) can benefit from the slave-core isolation between Qi communication stacks and the resonant tank control loop.
おすすめ
Drone and UAV Electronic Speed Controllers
The DSPIC33CH128MP208-I/PT suits multirotor drone and UAV electronic speed controllers (ESCs) where weight, power density, and dynamic response are paramount. At 200 MHz, the master can sample phase currents at up to 50 kHz and run advanced observer-based sensorless FOC algorithms that improve torque density at high RPM. The slave core handles telemetry over UART/SPI to the flight controller, freeing the master from protocol overhead so the FOC loop latency stays below 5 us. The high-resolution PWM produces clean 24-48 kHz switching waveforms that fall above most audible bands and avoid motor magnetostriction whine. The 80-pin TQFP package is small enough for 4-in-1 ESC boards but provides enough GPIO for current/voltage sensing on each phase, plus CAN FD for advanced drone buses. Industrial temperature grade supports outdoor UAV operation in direct sun.
おすすめ
Automotive Sensor Fusion
The DSPIC33CH128MP208-I/PT is suitable for automotive sensor-fusion ECUs combining radar, IMU, and wheel-speed sensors in chassis and ADAS applications. The master core runs the Kalman filter / sensor-fusion algorithm at deterministic 200 MHz while the slave core handles CAN FD stack parsing and diagnostics (UDS / OBD-II) without compromising the fusion loop. The high-resolution PWM can drive chassis actuators like electric power steering (EPS) torque overlay or active suspension valves with microsecond-accurate duty cycles. The functional-safety features (windowed WDT, CRC, dual-ADC cross-triggering, FMEDA support) streamline ISO 26262 ASIL-B qualification for sensor-fusion ECUs. While the -I/PT variant is industrial temperature, the -E/PT variant (-40 C to +125 C) extends the same hardware to under-hood and chassis-mounted modules.
おすすめ
Digital LED Lighting Drivers
The DSPIC33CH128MP208-I/PT works well in high-end digital LED drivers for stage lighting, architectural dimming, horticultural lighting, and cinema projection where current regulation accuracy, dimming depth, and DMX/RDM networking are required. The 12-bit 3.5 MSPS ADC samples LED string current with 0.1 % accuracy, enabling closed-loop constant-current control at up to 4 A per string. The high-resolution PWM provides 16-bit effective dimming resolution at 1 kHz refresh, supporting smooth theatrical fades with no visible stepping. The slave core handles DMX512 / RDM / DALI-2 protocol stacks while the master maintains deterministic current regulation at sub-100 us latency. The 250 ps PWM edge resolution reduces EMI in tightly-packaged architectural fixtures where CISPR 15 compliance is required.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: DSPIC33CH128MP208-I/PT — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | DSPIC33CH128MP208T-I/PT | DSPIC33CH256MP208-I/PT | DSPIC33CH128MP208-E/PT | DSPIC33CH64MP208-I/PT | DSPIC33CK256MP508-I/PT |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TQFP-80 (PT) | TQFP-80 (PT) - same | TQFP-80 (PT) - same | TQFP-80 (PT) - same | TQFP-80 (PT) - same | TQFP-80 (PT) - same |
| Core Architecture | Dual-core 200/180 MHz | Dual-core 200/180 MHz | Dual-core 200/180 MHz | Dual-core 200/180 MHz | Dual-core 200/180 MHz | Single-core 100 MHz |
| Flash Memory | 152 KB | 152 KB | 256 KB | 152 KB | 64 KB | 256 KB |
| Operating Temperature | -40 C to +85 C (Industrial) | -40 C to +85 C (Industrial) | -40 C to +85 C (Industrial) | -40 C to +125 C (Extended/Automotive) | -40 C to +85 C (Industrial) | -40 C to +85 C (Industrial) |
| PWM Resolution | High-resolution, 250 ps | High-resolution, 250 ps | High-resolution, 250 ps | High-resolution, 250 ps | High-resolution, 250 ps | High-resolution, 250 ps |
| CAN FD | Yes | Yes | Yes | Yes | Yes | Yes |
| Functional Safety (FuSa) | Yes (CRC, WDT, FMEDA) | Yes | Yes | Yes | Yes | Limited (CK family) |
主な差別化要因
- True dual-core 200/180 MHz architecture on a single die （vs DSPIC33CK256MP508-I/PT)
- 256 KB Flash option in same 80-pin TQFP package （vs DSPIC33CH256MP208-I/PT)
- Industrial -40 C to +85 C plus extended -40 C to +125 C option （vs DSPIC33CH128MP208-E/PT)
設計ノート
Provide a low-noise 3.3 V rail to all VDD pins (5, 13, 23, 33, 45). Place 100 nF X7R ceramic decoupling within 3 mm of each VDD pin and add a single 4.7 uF bulk capacitor per rail. AVDD and VREF+ should be sourced through a ferrite bead from VDD and bypassed with 100 nF + 10 uF; VREF- ties to AVSS. Estimated: at 200 MHz master + 180 MHz slave with all peripherals active, total core current is approximately 60-80 mA; plan the LDO for at least 150 mA headroom.
Route the two separate debug ports (PGED1/PGEC1/MCLR for the master and S1PGED1/S1PGEC1/S1MCLR for the slave) to dedicated header pads or test points; do not share these signals between cores. Place the 80-pin TQFP on a top layer with a continuous ground pour underneath and route the analog AN0-AN15 traces as short and direct as possible with ground shielding. The high-resolution PWM traces (PWM1H/PWM1L through PWM4H/PWM4L) should be length-matched within 1 mm to avoid duty-cycle skew.
Do not assume pin RB1 is exclusively available to either core - by default RB1 is the CLKO output for the slave but is also the CLKO option for the master; in MPLAB Code Configurator the slave project setting overrides the master. Estimated firmware consideration: the master and slave share access to certain peripherals (MSI), and the slave's PRAM region (16 KB) must be partitioned carefully to avoid runtime conflicts. Always re-validate the dual-core configuration after any PLL or oscillator change.
At 200 MHz master + 180 MHz slave core activity with all peripherals active, total power dissipation is approximately 0.5-0.7 W depending on I/O toggling rate. The 80-pin TQFP package has a theta_JA of approximately 40-50 C/W on a 4-layer PCB with ground pour. Estimated: at 85 C industrial ambient, junction temperature stays below 120 C without a heatsink; however, sustained ambient above 70 C in a sealed enclosure may require thermal vias to a bottom copper plane. Verify with a thermal probe in worst-case firmware.
コンプライアンス情報
RoHS compliant per Microchip product page. AEC-Q100 grade is NOT available on the -I/PT industrial variant; the -E/PT extended-temperature variant is the automotive-grade counterpart. Halogen-free status not explicitly stated in available data.
