PIC24FJ32GA102-E/SS - 16-bit 32MHz 32KB Flash MCU | Microchip
部品番号: PIC24FJ32GA102-E/SS ✓ 生産中PIC24FJ32GA102-E/SS 概要
An MCU integrates a CPU core, program memory, data memory, timers, communication peripherals, and analog conversion resources into one device. The PIC24FJ32GA102 belongs to the PIC24F family of 16-bit general-purpose flash microcontrollers, positioned between 8-bit microcontrollers and higher-end 32-bit control devices. Its 16-bit architecture supports efficient handling of control tasks, while the 32 MHz operating speed provides a 16 MIPS instruction rate. The 32 KB Flash memory provides 11K x 24 words of program storage, and the 8 KB RAM supports working data and stack requirements.
Key features include a 10-bit ADC, enhanced communication peripherals, programmable timers, and low-power modes associated with nanoWatt XLP technology. The extended-temperature device is suited to industrial, medical, and instrumented products that require operation over a wider environmental range. Its 28-pin SSOP package offers a compact surface-mount footprint suitable for cost-sensitive embedded control boards.
Typical applications include industrial monitoring equipment, sensor interfaces, medical instruments, power-management controllers, communication modules, and compact consumer appliances. The device is suitable where a 16-bit control architecture, on-chip Flash, moderate RAM capacity, and low-power operation are needed without the complexity of a higher-performance processor.
When laying out a board, connect every VSS and VDD pin and follow the pin-description table in the manufacturer datasheet for programming and decoupling connections. Place the decoupling capacitors close to the supply pins, and confirm the DISVREG configuration before programming.
This page consolidates manufacturer specifications, package details, engineering design guidance, and drop-in replacement information for engineers evaluating the PIC24FJ32GA102-E/SS.
ドロップイン代替品: PIC24FJ32GA102-E/SS — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: PIC24FJ32GA102-E/SS (同一形状・フットプリント) — 相違点: Package, ADC, I2C, Low-Power Technology, Operating Temperature.
PIC24FJ32GA002-E/ML
✅ ドロップイン価格はお問い合わせください
データシートを見る →PIC24FJ32GA102-I/SS
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →PIC24FJ32GA100-I/SS
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
PIC24FJ32GA101-I/SS
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
PIC24FJ32GA103-I/SS
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
PIC24FJ32GA102-E/SS 最大定格&電気的特性
| Product Type | 16-bit PIC24F general-purpose flash microcontroller |
| Maximum CPU Frequency | 32 MHz |
| Instruction Throughput | 16 MIPS |
| Flash Program Memory | 32 KB (11K x 24 words) |
| Data RAM | 8 KB |
| ADC Resolution | 10-bit |
| Architecture | 16-bit |
| Low-Power Technology | nanoWatt XLP |
| 動作温度範囲 | -40C to +125C |
| パッケージ | 28-pin SSOP |
| Package Width | 0.209 in |
| 実装タイプ | Surface Mount |
| Shipping Configuration | Tube |
| Programming Memory Endurance | 10,000 erase/write cycles minimum |
| Data Retention | At least 20 years |
| Code Protection | Supported |
| Application | Low-power embedded control |
| Manufacturer | Microchip Technology |
PIC24FJ32GA102-E/SS ピン構成
| ピン 1 | NC — Not connected; confirm pin assignment in the manufacturer datasheet |
| ピン 2 | NC — Not connected; confirm pin assignment in the manufacturer datasheet |
| ピン 3 | MCLR — Master clear reset; consult the datasheet for exact alternate functions |
| ピン 4 | RA0 — I/O port A pin 0; consult the datasheet for exact alternate functions |
| ピン 5 | RA1 — I/O port A pin 1; consult the datasheet for exact alternate functions |
| ピン 6 | RA2 — I/O port A pin 2; consult the datasheet for exact alternate functions |
| ピン 7 | RA3 — I/O port A pin 3; consult the datasheet for exact alternate functions |
| ピン 8 | RA4 — I/O port A pin 4; consult the datasheet for exact alternate functions |
| ピン 9 | RA5 — I/O port A pin 5; consult the datasheet for exact alternate functions |
| ピン 10 | VSS — Ground reference; connect all VSS pins |
| ピン 11 | VDD — Power supply; connect all VDD pins and place decoupling nearby |
| ピン 12 | RB0 — I/O port B pin 0; consult the datasheet for exact alternate functions |
| ピン 13 | RB1 — I/O port B pin 1; consult the datasheet for exact alternate functions |
| ピン 14 | RB2 — I/O port B pin 2; consult the datasheet for exact alternate functions |
| ピン 15 | RB3 — I/O port B pin 3; consult the datasheet for exact alternate functions |
| ピン 16 | RB4 — I/O port B pin 4; consult the datasheet for exact alternate functions |
| ピン 17 | RB5 — I/O port B pin 5; consult the datasheet for exact alternate functions |
| ピン 18 | RC0 — I/O port C pin 0; consult the datasheet for exact alternate functions |
| ピン 19 | RC1 — I/O port C pin 1; consult the datasheet for exact alternate functions |
| ピン 20 | RC2 — I/O port C pin 2; consult the datasheet for exact alternate functions |
| ピン 21 | RC3 — I/O port C pin 3; consult the datasheet for exact alternate functions |
| ピン 22 | RC4 — I/O port C pin 4; consult the datasheet for exact alternate functions |
| ピン 23 | RC5 — I/O port C pin 5; consult the datasheet for exact alternate functions |
| ピン 24 | RC6 — I/O port C pin 6; consult the datasheet for exact alternate functions |
| ピン 25 | RC7 — I/O port C pin 7; consult the datasheet for exact alternate functions |
| ピン 26 | OSC1 — Oscillator input; consult the datasheet for clock configuration |
| ピン 27 | OSC2 — Oscillator output; consult the datasheet for clock configuration |
| ピン 28 | DISVREG — Voltage regulator control; configuration affects programming |
主な用途
PIC24FJ32GA102-E/SS の用途: 6 件s: Industrial Sensor Monitoring, Medical Instrument Control, Low-Power Remote Sensor Node, Communication Interface Module, Power-Supply Controller, Compact Appliance Controller.
Industrial Sensor Monitoring
The PIC24FJ32GA102-E/SS fits industrial sensor monitoring designs that need a 16-bit control core, 32 KB of Flash, 8 KB of RAM, and a 10-bit ADC in a compact 28-pin SSOP. Its -40C to +125C operating range supports equipment exposed to varying enclosure temperatures. Use the ADC for analog inputs and the Flash for application code, while the timer and communication peripherals support periodic sampling, local display updates, and host communications.
おすすめ
Medical Instrument Control
The PIC24FJ32GA102-E/SS is appropriate for compact medical-instrument control boards that require deterministic 16-bit processing and mixed analog/digital signal handling. The 32 MHz maximum operating frequency provides 16 MIPS throughput, while the 10-bit ADC supports sensor conditioning and monitoring functions. The -E grade is useful where the instrument may operate across extended temperature conditions. Confirm electrical isolation, regulatory validation, and the required analog accuracy in the complete system design.
おすすめ
Low-Power Remote Sensor Node
Use the PIC24FJ32GA102-E/SS in a battery-operated remote sensor node when the design benefits from a 16-bit MCU with moderate memory and low-power features. Its 32 KB Flash accommodates protocol and application code, while 8 KB RAM supports buffering and stack space. The 10-bit ADC can read environmental or analog sensors, and nanoWart XLP technology provides the low-power operating framework. Optimize the sleep interval, oscillator choice, and peripheral shutdown sequence to meet the battery-life target.
おすすめ
Communication Interface Module
The PIC24FJ32GA102-E/SS can serve as the main controller in a compact communication interface, such as a sensor gateway, protocol bridge, or configuration interface. The 16-bit architecture and 16 MIPS throughput provide headroom for packet handling, framing, and control tasks, while 32 KB Flash supports firmware tables and protocol code. Use the available timer and communication resources according to the device datasheet, and keep the 28-pin SSOP layout straightforward for automated assembly.
おすすめ
Power-Supply Controller
The PIC24FJ32GA102-E/SS is a practical controller for a small power-supply or power-sequencing module. Its 10-bit ADC can supervise voltage or current-related analog signals, and the 32 MHz CPU can execute control loops, timing sequences, and fault handling. The -40C to +125C range supports industrial environments, but the exact operating limits must be checked against the power-stage design. Add external protection and isolation as required by the end application.
おすすめ
Compact Appliance Controller
For compact appliances and embedded products, the PIC24FJ32GA102-E/SS combines a 16-bit CPU, 32 KB Flash, 8 KB RAM, and a 10-bit ADC in an industry-standard 28-pin SSOP package. It can coordinate user inputs, motor or actuator timing, temperature sensing, and communication with a host controller. The extended-temperature grade helps when the product is operated in a warm enclosure. Validate the actuator drivers and safety interlocks separately from the MCU firmware.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: PIC24FJ32GA102-E/SS — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | PIC24FJ32GA002 | PIC24FJ32GA102-I/SS | PIC24FJ32GA100-I/SS | PIC24FJ32GA101-I/SS | PIC24FJ32GA103-I/SS |
|---|---|---|---|---|---|---|
| Package | 28-pin SSOP | 28-pin SSOP | 28-pin SSOP | 28-pin SSOP | 28-pin SSOP | 28-pin SSOP |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
主な差別化要因
- Extended-temperature grade (vs PIC24FJ32GA002)
- 32 MHz 16-bit performance class (vs PIC24FJ32GA100-I/SS)
- 32 KB Flash and 8 KB RAM with 10-bit ADC (vs PIC24FJ32GA101-I/SS)
設計ノート
Connect every VDD and VSS pin as specified in the manufacturer datasheet, then place the required decoupling capacitors close to the supply pins. Keep analog inputs and ADC traces away from switching nodes and high-current return paths. The device's nanoWart XLP architecture supports low-power designs, but the actual sleep current depends on clock, peripheral, and regulator configuration.
Route programming and debug signals as short and noise-tolerant as practical, and verify the DISVREG configuration before programming. The pin-description table in the manufacturer datasheet is the authoritative source for alternate functions, oscillator pins, and programming connections; do not infer pin roles solely from the 28-pin package outline.
Do not substitute a device based only on package and memory size. Check the -E temperature suffix, oscillator configuration, peripheral pin mapping, programming support, and the required operating voltage. PIC24FJ32GA002 is a close family comparison, but a valid replacement must match the complete electrical and pin-function requirements of the original design.
コンプライアンス情報
The manufacturer product and distributor listings identify the PIC24FJ32GA102 device and its 28-pin SSOP package. Automotive qualification and environmental-compliance claims were not present in the manufacturer materials, so those fields remain unknown.