PIC24FJ32GA102-E/SS - 16-bit 32MHz 32KB Flash MCU | Microchip
MPN: PIC24FJ32GA102-E/SS ✓ 啟用中PIC24FJ32GA102-E/SS 概覽
An MCU integrates a CPU core, program memory, data memory, timers, communication peripherals, and analog conversion resources into one device. The PIC24FJ32GA102 belongs to the PIC24F family of 16-bit general-purpose flash microcontrollers, positioned between 8-bit microcontrollers and higher-end 32-bit control devices. Its 16-bit architecture supports efficient handling of control tasks, while the 32 MHz operating speed provides a 16 MIPS instruction rate. The 32 KB Flash memory provides 11K x 24 words of program storage, and the 8 KB RAM supports working data and stack requirements.
Key features include a 10-bit ADC, enhanced communication peripherals, programmable timers, and low-power modes associated with nanoWatt XLP technology. The extended-temperature device is suited to industrial, medical, and instrumented products that require operation over a wider environmental range. Its 28-pin SSOP package offers a compact surface-mount footprint suitable for cost-sensitive embedded control boards.
Typical applications include industrial monitoring equipment, sensor interfaces, medical instruments, power-management controllers, communication modules, and compact consumer appliances. The device is suitable where a 16-bit control architecture, on-chip Flash, moderate RAM capacity, and low-power operation are needed without the complexity of a higher-performance processor.
When laying out a board, connect every VSS and VDD pin and follow the pin-description table in the manufacturer datasheet for programming and decoupling connections. Place the decoupling capacitors close to the supply pins, and confirm the DISVREG configuration before programming.
This page consolidates manufacturer specifications, package details, engineering design guidance, and drop-in replacement information for engineers evaluating the PIC24FJ32GA102-E/SS.
直接替換替代品,適用於 PIC24FJ32GA102-E/SS — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: PIC24FJ32GA102-E/SS (相同外形與佔位) — 差異在於 Package, ADC, I2C, Low-Power Technology, Operating Temperature.
PIC24FJ32GA002-E/ML
✅ 直接替換聯絡詢價
查看資料表 →PIC24FJ32GA102-I/SS
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →PIC24FJ32GA100-I/SS
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
PIC24FJ32GA101-I/SS
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
PIC24FJ32GA103-I/SS
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
PIC24FJ32GA102-E/SS 最大額定值與電氣特性
| Product Type | 16-bit PIC24F general-purpose flash microcontroller |
| Maximum CPU Frequency | 32 MHz |
| Instruction Throughput | 16 MIPS |
| Flash Program Memory | 32 KB (11K x 24 words) |
| Data RAM | 8 KB |
| ADC Resolution | 10-bit |
| Architecture | 16-bit |
| Low-Power Technology | nanoWatt XLP |
| 工作溫度範圍 | -40C to +125C |
| 封裝 | 28-pin SSOP |
| Package Width | 0.209 in |
| 安裝類型 | Surface Mount |
| Shipping Configuration | Tube |
| Programming Memory Endurance | 10,000 erase/write cycles minimum |
| Data Retention | At least 20 years |
| Code Protection | Supported |
| Application | Low-power embedded control |
| Manufacturer | Microchip Technology |
PIC24FJ32GA102-E/SS 腳位配置
| 腳位 1 | NC — Not connected; confirm pin assignment in the manufacturer datasheet |
| 腳位 2 | NC — Not connected; confirm pin assignment in the manufacturer datasheet |
| 腳位 3 | MCLR — Master clear reset; consult the datasheet for exact alternate functions |
| 腳位 4 | RA0 — I/O port A pin 0; consult the datasheet for exact alternate functions |
| 腳位 5 | RA1 — I/O port A pin 1; consult the datasheet for exact alternate functions |
| 腳位 6 | RA2 — I/O port A pin 2; consult the datasheet for exact alternate functions |
| 腳位 7 | RA3 — I/O port A pin 3; consult the datasheet for exact alternate functions |
| 腳位 8 | RA4 — I/O port A pin 4; consult the datasheet for exact alternate functions |
| 腳位 9 | RA5 — I/O port A pin 5; consult the datasheet for exact alternate functions |
| 腳位 10 | VSS — Ground reference; connect all VSS pins |
| 腳位 11 | VDD — Power supply; connect all VDD pins and place decoupling nearby |
| 腳位 12 | RB0 — I/O port B pin 0; consult the datasheet for exact alternate functions |
| 腳位 13 | RB1 — I/O port B pin 1; consult the datasheet for exact alternate functions |
| 腳位 14 | RB2 — I/O port B pin 2; consult the datasheet for exact alternate functions |
| 腳位 15 | RB3 — I/O port B pin 3; consult the datasheet for exact alternate functions |
| 腳位 16 | RB4 — I/O port B pin 4; consult the datasheet for exact alternate functions |
| 腳位 17 | RB5 — I/O port B pin 5; consult the datasheet for exact alternate functions |
| 腳位 18 | RC0 — I/O port C pin 0; consult the datasheet for exact alternate functions |
| 腳位 19 | RC1 — I/O port C pin 1; consult the datasheet for exact alternate functions |
| 腳位 20 | RC2 — I/O port C pin 2; consult the datasheet for exact alternate functions |
| 腳位 21 | RC3 — I/O port C pin 3; consult the datasheet for exact alternate functions |
| 腳位 22 | RC4 — I/O port C pin 4; consult the datasheet for exact alternate functions |
| 腳位 23 | RC5 — I/O port C pin 5; consult the datasheet for exact alternate functions |
| 腳位 24 | RC6 — I/O port C pin 6; consult the datasheet for exact alternate functions |
| 腳位 25 | RC7 — I/O port C pin 7; consult the datasheet for exact alternate functions |
| 腳位 26 | OSC1 — Oscillator input; consult the datasheet for clock configuration |
| 腳位 27 | OSC2 — Oscillator output; consult the datasheet for clock configuration |
| 腳位 28 | DISVREG — Voltage regulator control; configuration affects programming |
典型應用
PIC24FJ32GA102-E/SS 適用於 6 應用s: Industrial Sensor Monitoring, Medical Instrument Control, Low-Power Remote Sensor Node, Communication Interface Module, Power-Supply Controller, Compact Appliance Controller.
Industrial Sensor Monitoring
The PIC24FJ32GA102-E/SS fits industrial sensor monitoring designs that need a 16-bit control core, 32 KB of Flash, 8 KB of RAM, and a 10-bit ADC in a compact 28-pin SSOP. Its -40C to +125C operating range supports equipment exposed to varying enclosure temperatures. Use the ADC for analog inputs and the Flash for application code, while the timer and communication peripherals support periodic sampling, local display updates, and host communications.
推薦
Medical Instrument Control
The PIC24FJ32GA102-E/SS is appropriate for compact medical-instrument control boards that require deterministic 16-bit processing and mixed analog/digital signal handling. The 32 MHz maximum operating frequency provides 16 MIPS throughput, while the 10-bit ADC supports sensor conditioning and monitoring functions. The -E grade is useful where the instrument may operate across extended temperature conditions. Confirm electrical isolation, regulatory validation, and the required analog accuracy in the complete system design.
推薦
Low-Power Remote Sensor Node
Use the PIC24FJ32GA102-E/SS in a battery-operated remote sensor node when the design benefits from a 16-bit MCU with moderate memory and low-power features. Its 32 KB Flash accommodates protocol and application code, while 8 KB RAM supports buffering and stack space. The 10-bit ADC can read environmental or analog sensors, and nanoWart XLP technology provides the low-power operating framework. Optimize the sleep interval, oscillator choice, and peripheral shutdown sequence to meet the battery-life target.
推薦
Communication Interface Module
The PIC24FJ32GA102-E/SS can serve as the main controller in a compact communication interface, such as a sensor gateway, protocol bridge, or configuration interface. The 16-bit architecture and 16 MIPS throughput provide headroom for packet handling, framing, and control tasks, while 32 KB Flash supports firmware tables and protocol code. Use the available timer and communication resources according to the device datasheet, and keep the 28-pin SSOP layout straightforward for automated assembly.
推薦
Power-Supply Controller
The PIC24FJ32GA102-E/SS is a practical controller for a small power-supply or power-sequencing module. Its 10-bit ADC can supervise voltage or current-related analog signals, and the 32 MHz CPU can execute control loops, timing sequences, and fault handling. The -40C to +125C range supports industrial environments, but the exact operating limits must be checked against the power-stage design. Add external protection and isolation as required by the end application.
推薦
Compact Appliance Controller
For compact appliances and embedded products, the PIC24FJ32GA102-E/SS combines a 16-bit CPU, 32 KB Flash, 8 KB RAM, and a 10-bit ADC in an industry-standard 28-pin SSOP package. It can coordinate user inputs, motor or actuator timing, temperature sensing, and communication with a host controller. The extended-temperature grade helps when the product is operated in a warm enclosure. Validate the actuator drivers and safety interlocks separately from the MCU firmware.
推薦
推薦產品摘要
工程參考資料,適用於 PIC24FJ32GA102-E/SS — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | PIC24FJ32GA002 | PIC24FJ32GA102-I/SS | PIC24FJ32GA100-I/SS | PIC24FJ32GA101-I/SS | PIC24FJ32GA103-I/SS |
|---|---|---|---|---|---|---|
| Package | 28-pin SSOP | 28-pin SSOP | 28-pin SSOP | 28-pin SSOP | 28-pin SSOP | 28-pin SSOP |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
主要差異化特點
- Extended-temperature grade (對比PIC24FJ32GA002)
- 32 MHz 16-bit performance class (對比PIC24FJ32GA100-I/SS)
- 32 KB Flash and 8 KB RAM with 10-bit ADC (對比PIC24FJ32GA101-I/SS)
設計說明
Connect every VDD and VSS pin as specified in the manufacturer datasheet, then place the required decoupling capacitors close to the supply pins. Keep analog inputs and ADC traces away from switching nodes and high-current return paths. The device's nanoWart XLP architecture supports low-power designs, but the actual sleep current depends on clock, peripheral, and regulator configuration.
Route programming and debug signals as short and noise-tolerant as practical, and verify the DISVREG configuration before programming. The pin-description table in the manufacturer datasheet is the authoritative source for alternate functions, oscillator pins, and programming connections; do not infer pin roles solely from the 28-pin package outline.
Do not substitute a device based only on package and memory size. Check the -E temperature suffix, oscillator configuration, peripheral pin mapping, programming support, and the required operating voltage. PIC24FJ32GA002 is a close family comparison, but a valid replacement must match the complete electrical and pin-function requirements of the original design.
合規資訊
The manufacturer product and distributor listings identify the PIC24FJ32GA102 device and its 28-pin SSOP package. Automotive qualification and environmental-compliance claims were not present in the manufacturer materials, so those fields remain unknown.