Microchip Technology

PIC24FJ32GA102-E/SS - 16-bit 32MHz 32KB Flash MCU | Microchip

MPN: PIC24FJ32GA102-E/SS ✓ פעיל
28-pin SSOP Package 32 MHz Speed 32 KB (11K x 24 words) Memory
כמות הזמנה מינימלית: 1 |

PIC24FJ32GA102-E/SS סקירה

The Microchip Technology PIC24FJ32GA102-E/SS is a 16-bit PIC24F microcontroller operating at up to 32 MHz, with 32 KB of Flash program memory, 8 KB of RAM, and advanced integrated peripherals in a 28-pin SSOP package. The device is designed for low-power embedded applications and includes nanoWatt XLP technology for energy-efficient operation. The -E suffix identifies the extended-temperature option, while /SS identifies the SSOP package and tube shipping configuration.

An MCU integrates a CPU core, program memory, data memory, timers, communication peripherals, and analog conversion resources into one device. The PIC24FJ32GA102 belongs to the PIC24F family of 16-bit general-purpose flash microcontrollers, positioned between 8-bit microcontrollers and higher-end 32-bit control devices. Its 16-bit architecture supports efficient handling of control tasks, while the 32 MHz operating speed provides a 16 MIPS instruction rate. The 32 KB Flash memory provides 11K x 24 words of program storage, and the 8 KB RAM supports working data and stack requirements.

Key features include a 10-bit ADC, enhanced communication peripherals, programmable timers, and low-power modes associated with nanoWatt XLP technology. The extended-temperature device is suited to industrial, medical, and instrumented products that require operation over a wider environmental range. Its 28-pin SSOP package offers a compact surface-mount footprint suitable for cost-sensitive embedded control boards.

Typical applications include industrial monitoring equipment, sensor interfaces, medical instruments, power-management controllers, communication modules, and compact consumer appliances. The device is suitable where a 16-bit control architecture, on-chip Flash, moderate RAM capacity, and low-power operation are needed without the complexity of a higher-performance processor.

When laying out a board, connect every VSS and VDD pin and follow the pin-description table in the manufacturer datasheet for programming and decoupling connections. Place the decoupling capacitors close to the supply pins, and confirm the DISVREG configuration before programming.

This page consolidates manufacturer specifications, package details, engineering design guidance, and drop-in replacement information for engineers evaluating the PIC24FJ32GA102-E/SS.

חלופות תחליף ישיר עבור PIC24FJ32GA102-E/SS — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם PIC24FJ32GA102-E/SS (אותו גורם צורה וטביעת רגל) — שונים ב Package, ADC, I2C, Low-Power Technology, Operating Temperature.

Microchip Technology
Package: 28-QFN (6x6 mm)
ADC: 10-bit, up to 9 channels
I2C: 2 modules
Microchip Technology
Package: 28-SSOP (0.209 inch / 5.30 mm body width)
ADC: 10-bit, up to 13 channels, 1.1 Msps
I2C: 2

PIC24FJ32GA002-E/ML

✅ Drop-In
Microchip Technology
📦 28-pin SSOP
PIC24F (16-bit RISC, Harvard) · PIC24FJ64GA004 Family · 32 MHz (16 MIPS) · 32 KB (11K x 24 words) · 8 KB · 2.0 V to 3.6 V · 10-bit, up to 9 channels · 2 modules

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

PIC24FJ32GA102-I/SS

✅ Drop-In ⚠️ מפרטים לא מאומתים
Microchip Technology
📦 28-pin SSOP
PIC24F XLP nanoWatt · PIC24F (16-bit modified Harvard) · 32 MHz / 16 MIPS · 32 KB (11K x 24 words) · 8 KB · None (emulated in Flash) · 2.0 V to 3.6 V · 21

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

PIC24FJ32GA100-I/SS

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 28-pin SSOP
Same PIC24FJ32GA 28-pin SSOP family and 32 MHz architecture, with different program-memory capacity from the PIC24FJ32GA102.

📋 חלופה להתייחסות (לא בקטלוג)

PIC24FJ32GA101-I/SS

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 28-pin SSOP
Same PIC24FJ32GA family, 28-pin SSOP package and 32 MHz CPU class, with a lower memory-density variant than the PIC24FJ32GA102.

📋 חלופה להתייחסות (לא בקטלוג)

PIC24FJ32GA103-I/SS

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 28-pin SSOP
Same PIC24FJ32GA family and 28-pin SSOP footprint, with a different memory-density and temperature-suffix configuration.

📋 חלופה להתייחסות (לא בקטלוג)

PIC24FJ32GA102-E/SS דירוגים מרביים ומאפיינים חשמליים

Product Type 16-bit PIC24F general-purpose flash microcontroller
Maximum CPU Frequency 32 MHz
Instruction Throughput 16 MIPS
Flash Program Memory 32 KB (11K x 24 words)
Data RAM 8 KB
ADC Resolution 10-bit
Architecture 16-bit
Low-Power Technology nanoWatt XLP
טווח טמפרטורת פעולה -40C to +125C
מארז 28-pin SSOP
Package Width 0.209 in
סוג הרכבה Surface Mount
Shipping Configuration Tube
Programming Memory Endurance 10,000 erase/write cycles minimum
Data Retention At least 20 years
Code Protection Supported
Application Low-power embedded control
Manufacturer Microchip Technology

תצורת פינים של PIC24FJ32GA102-E/SS

SOIC-28 Package Pinout Diagram SOIC-28W 28-pin, 7.5x17.9mm, P1.27mm, JEDEC MS-013. 1 28 2 27 3 26 4 25 5 24 6 23 7 22 8 21 9 20 10 19 11 18 12 17 13 16 14 15 SOIC-28
פין 1 NC — Not connected; confirm pin assignment in the manufacturer datasheet
פין 2 NC — Not connected; confirm pin assignment in the manufacturer datasheet
פין 3 MCLR — Master clear reset; consult the datasheet for exact alternate functions
פין 4 RA0 — I/O port A pin 0; consult the datasheet for exact alternate functions
פין 5 RA1 — I/O port A pin 1; consult the datasheet for exact alternate functions
פין 6 RA2 — I/O port A pin 2; consult the datasheet for exact alternate functions
פין 7 RA3 — I/O port A pin 3; consult the datasheet for exact alternate functions
פין 8 RA4 — I/O port A pin 4; consult the datasheet for exact alternate functions
פין 9 RA5 — I/O port A pin 5; consult the datasheet for exact alternate functions
פין 10 VSS — Ground reference; connect all VSS pins
פין 11 VDD — Power supply; connect all VDD pins and place decoupling nearby
פין 12 RB0 — I/O port B pin 0; consult the datasheet for exact alternate functions
פין 13 RB1 — I/O port B pin 1; consult the datasheet for exact alternate functions
פין 14 RB2 — I/O port B pin 2; consult the datasheet for exact alternate functions
פין 15 RB3 — I/O port B pin 3; consult the datasheet for exact alternate functions
פין 16 RB4 — I/O port B pin 4; consult the datasheet for exact alternate functions
פין 17 RB5 — I/O port B pin 5; consult the datasheet for exact alternate functions
פין 18 RC0 — I/O port C pin 0; consult the datasheet for exact alternate functions
פין 19 RC1 — I/O port C pin 1; consult the datasheet for exact alternate functions
פין 20 RC2 — I/O port C pin 2; consult the datasheet for exact alternate functions
פין 21 RC3 — I/O port C pin 3; consult the datasheet for exact alternate functions
פין 22 RC4 — I/O port C pin 4; consult the datasheet for exact alternate functions
פין 23 RC5 — I/O port C pin 5; consult the datasheet for exact alternate functions
פין 24 RC6 — I/O port C pin 6; consult the datasheet for exact alternate functions
פין 25 RC7 — I/O port C pin 7; consult the datasheet for exact alternate functions
פין 26 OSC1 — Oscillator input; consult the datasheet for clock configuration
פין 27 OSC2 — Oscillator output; consult the datasheet for clock configuration
פין 28 DISVREG — Voltage regulator control; configuration affects programming

יישומים טיפוסיים

PIC24FJ32GA102-E/SS מתאים עבור 6 יישוםs: Industrial Sensor Monitoring, Medical Instrument Control, Low-Power Remote Sensor Node, Communication Interface Module, Power-Supply Controller, Compact Appliance Controller.

🏭

Industrial Sensor Monitoring

The PIC24FJ32GA102-E/SS fits industrial sensor monitoring designs that need a 16-bit control core, 32 KB of Flash, 8 KB of RAM, and a 10-bit ADC in a compact 28-pin SSOP. Its -40C to +125C operating range supports equipment exposed to varying enclosure temperatures. Use the ADC for analog inputs and the Flash for application code, while the timer and communication peripherals support periodic sampling, local display updates, and host communications.

💊

Medical Instrument Control

The PIC24FJ32GA102-E/SS is appropriate for compact medical-instrument control boards that require deterministic 16-bit processing and mixed analog/digital signal handling. The 32 MHz maximum operating frequency provides 16 MIPS throughput, while the 10-bit ADC supports sensor conditioning and monitoring functions. The -E grade is useful where the instrument may operate across extended temperature conditions. Confirm electrical isolation, regulatory validation, and the required analog accuracy in the complete system design.

🧩

Low-Power Remote Sensor Node

Use the PIC24FJ32GA102-E/SS in a battery-operated remote sensor node when the design benefits from a 16-bit MCU with moderate memory and low-power features. Its 32 KB Flash accommodates protocol and application code, while 8 KB RAM supports buffering and stack space. The 10-bit ADC can read environmental or analog sensors, and nanoWart XLP technology provides the low-power operating framework. Optimize the sleep interval, oscillator choice, and peripheral shutdown sequence to meet the battery-life target.

🌐

Communication Interface Module

The PIC24FJ32GA102-E/SS can serve as the main controller in a compact communication interface, such as a sensor gateway, protocol bridge, or configuration interface. The 16-bit architecture and 16 MIPS throughput provide headroom for packet handling, framing, and control tasks, while 32 KB Flash supports firmware tables and protocol code. Use the available timer and communication resources according to the device datasheet, and keep the 28-pin SSOP layout straightforward for automated assembly.

⚡

Power-Supply Controller

The PIC24FJ32GA102-E/SS is a practical controller for a small power-supply or power-sequencing module. Its 10-bit ADC can supervise voltage or current-related analog signals, and the 32 MHz CPU can execute control loops, timing sequences, and fault handling. The -40C to +125C range supports industrial environments, but the exact operating limits must be checked against the power-stage design. Add external protection and isolation as required by the end application.

🔧

Compact Appliance Controller

For compact appliances and embedded products, the PIC24FJ32GA102-E/SS combines a 16-bit CPU, 32 KB Flash, 8 KB RAM, and a 10-bit ADC in an industry-standard 28-pin SSOP package. It can coordinate user inputs, motor or actuator timing, temperature sensing, and communication with a host controller. The extended-temperature grade helps when the product is operated in a warm enclosure. Validate the actuator drivers and safety interlocks separately from the MCU firmware.

סיכום מוצרים מומלצים

PIC24FJ32GA102 Related PIC24FJ32GA family device בשימוש ב-: Industrial Sensor Monitoring, Medical Instrument Control, Communication Interface Module, Power-Supply Controller PIC24FJ32GA002 Lower-temperature family alternative בשימוש ב-: Industrial Sensor Monitoring, Medical Instrument Control, Power-Supply Controller PIC24FJ32GA102-I/SS Microchip Technology בשימוש ב-: Low-Power Remote Sensor Node, Compact Appliance Controller PIC24FJ32GA100-I/SS Lower-memory PIC24FJ32GA variant בשימוש ב-: Low-Power Remote Sensor Node PIC24FJ32GA101-I/SS Memory-density comparison variant בשימוש ב-: Communication Interface Module PIC24FJ32GA103-I/SS Same-family memory comparison בשימוש ב-: Compact Appliance Controller
What is the operating speed of the PIC24FJ32GA102-E/SS?
The PIC24FJ32GA102-E/SS operates at a maximum CPU frequency of 32 MHz. According to the Microchip product information, this 16-bit PIC24F device delivers a 16 MIPS instruction rate. The processor is suitable for real-time control, sensor conditioning, communication handling, and embedded products that require more processing headroom than a typical 8-bit microcontroller.
How much program memory and RAM does PIC24FJ32GA102-E/SS have?
The PIC24FJ32GA102-E/SS provides 32 KB of Flash program memory and 8 KB of RAM. The Flash memory is organized as 11K x 24 words, as described in the distributor listing for the exact MPN. This combination supports moderate embedded applications, boot code, configuration storage, protocol handlers, and working data without an external memory device.
What package does PIC24FJ32GA102-E/SS use?
The PIC24FJ32GA102-E/SS is offered in a 28-pin SSOP package. The /SS package suffix identifies the SSOP configuration, and the manufacturer listing describes the device as a 28-SSOP microcontroller. The listed package width is 0.209 in. Confirm land pattern and pin numbering against the manufacturer datasheet before laying out a new PCB.
Is PIC24FJ32GA102-E/SS suitable for extended-temperature applications?
Yes, the -E designation identifies the extended-temperature configuration, with the exact-device listing showing operation from -40C to +125C. This makes the PIC24FJ32GA102-E/SS a better fit for industrial, medical, and outdoor-adjacent equipment than a standard commercial-temperature grade when the enclosure temperature can approach the device limits.
Does PIC24FJ32GA102-E/SS include an ADC?
The PIC24FJ32GA102-E/SS includes a 10-bit ADC. The ADC is useful for analog sensor inputs, battery or supply monitoring, potentiometer readings, and general analog signal conditioning. Configure the conversion time and sampling behavior in firmware, and keep sensitive analog routing away from high-current switching nodes on the PCB.
What is the best drop-in replacement for PIC24FJ32GA102-E/SS?
The closest documented substitute is the PIC24FJ32GA002, which appears in the manufacturer cross-reference material and shares the 28-pin SSOP family format, 32 KB Flash, and 8 KB RAM organization. It differs in temperature grade, so verify the -E versus standard temperature requirement, oscillator options, pin functions, and programming setup before treating it as a drop-in replacement.
Can PIC24FJ32GA002 replace PIC24FJ32GA102-E/SS?
The PIC24FJ32GA002 is a candidate replacement because Microchip identifies it as a comparable member of the PIC24FJ32GA family and the cross-reference listing places it alongside the target device. It is not an automatic substitute for extended-temperature designs: confirm the required operating-temperature range, pin assignments, oscillator configuration, and device programming support against both datasheets.
When should I choose PIC24FJ32GA102-E/SS instead of PIC24FJ32GA002?
Choose PIC24FJ32GA102-E/SS when the design must operate across the extended -40C to +125C temperature range or requires the exact -E grade specified in the BOM. Choose PIC24FJ32GA002 when its temperature rating and pin configuration match the product and lower-temperature operation is acceptable. The two devices share the same 28-pin SSOP package and core memory organization, so the decision is primarily grade and qualification.
What is the difference between PIC24FJ32GA102-E/SS and PIC24FJ32GA002?
Both devices are 28-pin SSOP PIC24F devices with 32 KB Flash and 8 KB RAM, but their temperature grades differ. The PIC24FJ32GA102-E/SS carries the -E extended-temperature designation, while the PIC24FJ32GA002 is the standard-temperature family member. Verify oscillator, peripheral, and pin-function differences in the manufacturer documentation before replacing one with the other.
How do I choose a low-power MCU for a battery-powered sensor node?
The PIC24FJ32GA102-E/SS is a strong starting point for a battery-powered sensor node because it combines a 16-bit CPU, 32 KB Flash, 8 KB RAM, a 10-bit ADC, and nanoWart XLP low-power technology. The exact sleep currents and wake-up timing should be confirmed in the datasheet for the selected clock and peripheral configuration. Disable unused peripherals and use the low-power modes specified in the device documentation.
What documentation do I need to design a PCB for PIC24FJ32GA102-E/SS?
Use the Microchip PIC24FJ32GA102 product page and the PIC24FJ32GA family datasheet for the pin-description table, electrical characteristics, and programming information. Connect all VSS and VDD pins, place decoupling capacitors near the supply pins, and use the pin-description table when assigning PCB tracks. The device documentation also identifies DISVREG configuration details that affect programming.
What are the key specifications engineers should know about PIC24FJ32GA102-E/SS?
The PIC24FJ32GA102-E/SS is a 16-bit PIC24F MCU with a maximum 32 MHz CPU frequency, 16 MIPS throughput, 32 KB of Flash program memory, 8 KB of RAM, a 10-bit ADC, and operation from -40C to +125C. It is housed in a 28-pin SSOP package and uses nanoWart XLP technology for low-power embedded designs. These characteristics make it suitable for industrial monitoring, medical instruments, and compact control systems.
Where can I find the PIC24FJ32GA102-E/SS pinout?
The pinout is published in the Microchip PIC24FJ32GA family datasheet and on the official PIC24FJ32GA102 product page. Use the package drawing and pin-description table for the 28-pin SSOP footprint, including VDD, VSS, programming, oscillator, and I/O assignments. Do not infer unused or alternate-function pins from the package count alone.
Is PIC24FJ32GA102-E/SS compatible with standard PIC24F development tools?
The PIC24FJ32GA102-E/SS is a PIC24F device with nanoWart XLP technology, and the official product page references the Explorer 16/32 development platform with Plug-In Modules and PICtail Plus daughter-card support. Select a programmer and debug adapter that supports the PIC24FJ32GA family, then verify device packing, voltage settings, and programming configuration in the tool software.
Where can I buy PIC24FJ32GA102-E/SS and what is the price?
Use the Request a Quote form on this page to request current availability, volume pricing, and lead time for the PIC24FJ32GA102-E/SS. Commercial terms can change by quantity, package configuration, and inventory, so request a quotation rather than relying on a static price listing. Confirm the exact MPN includes the -E temperature grade and /SS package suffix.

נתוני עזר הנדסיים עבור PIC24FJ32GA102-E/SS — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the PIC24FJ32GA102-E/SS for new 28-pin SSOP designs that require a 16-bit PIC24F core, 32 MHz maximum operation, 32 KB Flash, 8 KB RAM, a 10-bit ADC, and an extended -40C to +125C temperature range. The PIC24FJ32GA002 is the closest documented family alternative for designs that operate within its temperature rating and match its pin configuration. The -I and lower-memory GA100, GA101, and GA103 variants can be evaluated for industrial-temperature or memory-density requirements, but each requires a pin, oscillator, peripheral, and firmware comparison. For production use, verify the exact Microchip part number, package marking, programming support, and current lifecycle status with the manufacturer.

השוואה עם חלופות

פרמטר מוצר זה PIC24FJ32GA002 PIC24FJ32GA102-I/SS PIC24FJ32GA100-I/SS PIC24FJ32GA101-I/SS PIC24FJ32GA103-I/SS
Package 28-pin SSOP 28-pin SSOP 28-pin SSOP 28-pin SSOP 28-pin SSOP 28-pin SSOP
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Maximum CPU Frequency 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz

מבדילים עיקריים

  • Extended-temperature grade (לעומתPIC24FJ32GA002)
  • 32 MHz 16-bit performance class (לעומתPIC24FJ32GA100-I/SS)
  • 32 KB Flash and 8 KB RAM with 10-bit ADC (לעומתPIC24FJ32GA101-I/SS)

הערות תכנון

Connect every VDD and VSS pin as specified in the manufacturer datasheet, then place the required decoupling capacitors close to the supply pins. Keep analog inputs and ADC traces away from switching nodes and high-current return paths. The device's nanoWart XLP architecture supports low-power designs, but the actual sleep current depends on clock, peripheral, and regulator configuration.

Route programming and debug signals as short and noise-tolerant as practical, and verify the DISVREG configuration before programming. The pin-description table in the manufacturer datasheet is the authoritative source for alternate functions, oscillator pins, and programming connections; do not infer pin roles solely from the 28-pin package outline.

Do not substitute a device based only on package and memory size. Check the -E temperature suffix, oscillator configuration, peripheral pin mapping, programming support, and the required operating voltage. PIC24FJ32GA002 is a close family comparison, but a valid replacement must match the complete electrical and pin-function requirements of the original design.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The manufacturer product and distributor listings identify the PIC24FJ32GA102 device and its 28-pin SSOP package. Automotive qualification and environmental-compliance claims were not present in the manufacturer materials, so those fields remain unknown.

הנתונים אומתו בתאריך: 2026-11-16 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

PIC24FJ32GA102-E/SS PIC24FJ32GA102-E/SS datasheet PIC24FJ32GA102-E/SS datasheet pdf PIC24FJ32GA102-E/SS pinout PIC24FJ32GA102-E/SS footprint PIC24FJ32GA102-E/SS equivalent PIC24FJ32GA102-E/SS replacement PIC24FJ32GA102-E/SS vs PIC24FJ32GA002 PIC24FJ32GA102-E/SS price PIC24FJ32GA102-E/SS stock Microchip PIC24FJ32GA102-E/SS PIC24FJ32GA102 28-pin SSOP microcontroller PIC24FJ32GA102 low power sensor controller PIC24FJ32GA102 ADC application circuit

רכיבים ומונחים קשורים

Microchip Technology PIC24FJ32GA102-E/SS PIC24FJ32GA102 PIC24FJ32GA002 PIC24FJ32GA102-I/SS PIC24FJ32GA100-I/SS PIC24FJ32GA101-I/SS PIC24FJ32GA103-I/SS PIC24F family 16-bit microcontroller general-purpose flash microcontroller nanoWart XLP low-power embedded control 32 MHz 16 MIPS 32 KB Flash memory 8 KB RAM 10-bit ADC 28-pin SSOP MCLR reset DISVREG industrial sensor monitoring medical instrument control battery-powered sensor node power-supply controller
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר