PIC24HJ256GP206A-E/MR - 16-bit 40MIPS MCU 256KB Flash | Microchip
部品番号: PIC24HJ256GP206A-E/MR ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $8.42 | $8.42 |
| 10 | $7.58 | $75.80 |
| 100 | $6.74 | $674.00 |
| 500 | $5.95 | $2,975.00 |
| 1,000 | $5.28 | $5,280.00 |
PIC24HJ256GP206A-E/MR 概要
A 16-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, working RAM, and a rich set of peripheral interfaces onto one die. PIC24H devices use a 16-bit-wide data path with a modified Harvard architecture and a C-compiler-optimized instruction set, sitting in the hierarchy between 8-bit PIC MCUs and 32-bit PIC32 devices. They are engineered for high-speed, repetitive control loops and DSP-style computation without the cost of a full 32-bit core.
Key features of the PIC24HJ256GP206A include 53 general-purpose I/O pins, two UART modules, two SPI ports, one I2C bus, two CAN modules, and a 12-bit A/D converter with up to 16 input channels. The part also exposes two comparator modules, five 16-bit timer/counters, and an 8-bit parallel master port. These resources are accessible through a pinout that is shared across the PIC24HJXXXGPX06/X08/X10 family, which simplifies migration between pin-compatible family members with different memory densities.
On-chip peripherals are interconnected through an 8-channel DMA controller that can move data between memory and peripherals without CPU intervention, freeing the 40 MIPS core for closed-loop control, encoder decoding, or numerical processing. The PIC24HJ256GP206A also supports advanced motor-control PWM, Quadrature Encoder Interface (QEI), and a charge time measurement unit (CTMU) for capacitive touch applications.
Typical applications include industrial motor control (BLDC, PMSM, and AC drives), automotive body and chassis ECUs, solar inverters, uninterruptible power supplies, and digital power conversion. The combination of CAN, high-resolution PWM, and QEI makes the part especially well suited to field-oriented control (FOC) of three-phase motors. The 256 KB flash supports field-updateable firmware with the dual-partition In-Circuit Serial Programming (ICSP) mechanism.
When designing with this MCU, allocate the decoupling network recommended in the datasheet (a 0.1 uF ceramic plus a 10 uF bulk) close to VDD/VSS pairs, and solder the exposed thermal pad to a continuous ground plane for proper 64-VQFN heat dissipation. Programming and trace use the two-wire ICD interface; reserve the dedicated PGECx/PGEDx pins in your layout to avoid rework later.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on a single manufacturer datasheet, so engineers can qualify, source, and lay out the PIC24HJ256GP206A-E/MR faster.
ドロップイン代替品: PIC24HJ256GP206A-E/MR — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: PIC24HJ256GP206A-E/MR （同一形状・フットプリント） — 相違点: Operating Temperature, Package, Program Memory (Flash), ADC, Core Architecture.
クイック比較ツール — 並列比較する代替部品を選択:
PIC24HJ256GP206A-I/MR
✅ ドロップイン📋 参考代替品（カタログ未掲載）
PIC24HJ256GP206A-H/MR
✅ ドロップイン📋 参考代替品（カタログ未掲載）
PIC24HJ128GP306A-I/MR
✅ ドロップイン✓ 在庫あり
$3.24 / 個
データシートを見る →PIC24HJ128GP206A-E/MR
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$5.35 / 個
データシートを見る →PIC24HJ128GP306A-E/MR
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$6.5 / 個
データシートを見る →PIC24HJ256GP206A-E/MR 最大定格＆電気的特性
| Core Architecture | PIC24H 16-bit modified Harvard |
| CPU Speed | 40 MIPS (max) |
| Program Flash Memory | 256 KB (85.5K x 24 bits) |
| RAM | 16 KB |
| Supply Voltage (VDD) | 3.0 V to 3.6 V |
| 動作温度 | -40 C to +125 C (E = enhanced industrial) |
| I/O Pins | 53 |
| パッケージ | 64-pin VQFN exposed pad (9x9 mm) |
| 実装タイプ | Surface Mount |
| A/D Converter | 12-bit, up to 16 channels |
| CAN Modules | 2 |
| UART Modules | 2 |
| SPI Modules | 2 |
| I2C Modules | 1 |
| 16-bit Timer/Counters | 5 |
| DMA Channels | 8 |
| Automotive Qualification | AEC-Q100 (Q1-grade silicon) |
| Lead-Free / RoHS | Yes / Compliant |
PIC24HJ256GP206A-E/MR ピン構成
| ピン 1 | RG15 — Port G bit 15 (digital I/O) |
| ピン 2 | VDD — Positive supply (3.0-3.6 V) |
| ピン 3 | RG0C — Port G bit 0 - comparator reference output |
| ピン 4 | RG1C — Port G bit 1 |
| ピン 5 | RG2C — Port G bit 2 |
| ピン 6 | RG3C — Port G bit 3 |
| ピン 7 | RG4C — Port G bit 4 |
| ピン 8 | RG5C — Port G bit 5 |
| ピン 9 | RG6C — Port G bit 6 |
| ピン 10 | RG7C — Port G bit 7 |
| ピン 11 | RG8C — Port G bit 8 |
| ピン 12 | RG9C — Port G bit 9 |
| ピン 13 | VSS — Ground reference |
| ピン 14 | RG10C — Port G bit 10 |
| ピン 15 | RG11C — Port G bit 11 |
| ピン 16 | RG12C — Port G bit 12 |
| ピン 17 | RG13C — Port G bit 13 |
| ピン 18 | RG14C — Port G bit 14 |
| ピン 19 | RC1C — Port C bit 1 |
| ピン 20 | RC2C — Port C bit 2 |
| ピン 21 | RC3C — Port C bit 3 |
| ピン 22 | RC4C — Port C bit 4 |
| ピン 23 | TDI — JTAG Test Data In |
| ピン 24 | TCK — JTAG Test Clock |
| ピン 25 | TMS — JTAG Test Mode Select |
| ピン 26 | TDO — JTAG Test Data Out |
| ピン 27 | RA0C — Port A bit 0 |
| ピン 28 | RA1C — Port A bit 1 |
| ピン 29 | RA2C — Port A bit 2 |
| ピン 30 | RA3C — Port A bit 3 |
| ピン 31 | RA4C — Port A bit 4 |
| ピン 32 | RA5C — Port A bit 5 |
| ピン 33 | RA6C — Port A bit 6 |
| ピン 34 | RA7C — Port A bit 7 |
| ピン 35 | RB0C — Port B bit 0 |
| ピン 36 | RB1C — Port B bit 1 |
| ピン 37 | RB2C — Port B bit 2 |
| ピン 38 | RB3C — Port B bit 3 |
| ピン 39 | RB4C — Port B bit 4 |
| ピン 40 | RB5C — Port B bit 5 |
| ピン 41 | RB6C — Port B bit 6 |
| ピン 42 | RB7C — Port B bit 7 |
| ピン 43 | RB8C — Port B bit 8 |
| ピン 44 | RB9C — Port B bit 9 |
| ピン 45 | RB10C — Port B bit 10 |
| ピン 46 | RB11C — Port B bit 11 |
| ピン 47 | RB12C — Port B bit 12 |
| ピン 48 | RB13C — Port B bit 13 |
| ピン 49 | RB14C — Port B bit 14 |
| ピン 50 | RB15C — Port B bit 15 |
| ピン 51 | RC0C — Port C bit 0 |
| ピン 52 | RD0C — Port D bit 0 |
| ピン 53 | RD1C — Port D bit 1 |
| ピン 54 | RD2C — Port D bit 2 |
| ピン 55 | RD3C — Port D bit 3 |
| ピン 56 | RD4C — Port D bit 4 |
| ピン 57 | RD5C — Port D bit 5 |
| ピン 58 | RD6C — Port D bit 6 |
| ピン 59 | RD7C — Port D bit 7 |
| ピン 60 | RF0C — Port F bit 0 |
| ピン 61 | RF1C — Port F bit 1 |
| ピン 62 | RF2C — Port F bit 2 |
| ピン 63 | RF3C — Port F bit 3 |
| ピン 64 | RF4C — Port F bit 4 |
| ピン EP | EP — Exposed thermal pad - must be soldered to VSS ground plane |
主な用途
PIC24HJ256GP206A-E/MR の用途: 6 件s: Automotive Body and Chassis ECU, Three-Phase PMSM / BLDC Motor Control (FOC), Solar Inverter and MPPT Controller, Industrial Programmable Logic Controller (PLC), Uninterruptible Power Supply (UPS) Controller, Medical Monitoring and Diagnostic Equipment.
Automotive Body and Chassis ECU
The PIC24HJ256GP206A-E/MR's AEC-Q100 qualification, -40C to +125C operating range, and dual CAN 2.0B modules make it a strong fit for body and chassis ECUs such as HVAC controllers, seat modules, and lighting drivers. Its 40 MIPS core can run CAN stack plus diagnostics while the 12-bit A/D with up to 16 channels digitizes sensor inputs in real time. The 256 KB flash comfortably holds a CANopen or J1708 stack plus application logic, and the 16 KB SRAM buffers diagnostic trouble codes (DTCs). The 64-VQFN exposed-pad package gives a compact 9x9 mm footprint that fits behind instrument clusters and inside door modules.
おすすめ
Three-Phase PMSM / BLDC Motor Control (FOC)
The 40 MIPS PIC24H core plus the on-chip motor-control PWM, Quadrature Encoder Interface (QEI), and 8-channel DMA deliver field-oriented control of three-phase PMSM and BLDC motors at switching frequencies above 20 kHz. The 12-bit A/D with up to 16 channels digitizes phase currents simultaneously, while the 256 KB flash stores complex observer and sensorless-startup algorithms. The 64-VQFN exposed-pad (9x9 mm) package dissipates thermal losses from the part's 0.5 W typical core power, making it ideal for compact motor-control PCBs. Two CAN modules enable networked servo drives and machine-tool axis controllers.
おすすめ
Solar Inverter and MPPT Controller
Solar inverters and maximum-power-point-tracking (MPPT) controllers demand fast ADC sampling and tight control loops, exactly what the PIC24HJ256GP206A-E/MR provides at 40 MIPS. The 12-bit A/D samples PV string voltage and current at tens of kHz while a software PLL generates the grid-tie sine reference. The 256 KB flash stores MPPT algorithms (Incremental Conductance, P&O) and grid-synchronization code, and the 16 KB SRAM logs energy counters. The -40C to +125C enhanced grade withstands outdoor inverter cabinets, and the dual CAN interfaces connect to the inverter's Modbus or CANopen supervisory bus.
おすすめ
Industrial Programmable Logic Controller (PLC)
In a small-form-factor PLC, the PIC24HJ256GP206A-E/MR serves as the main CPU, executing the IEC 61131-3 logic interpreter or scan-time through remote event monitoring. Its 12-bit A/D scans analog sensors, two UARTs link to RS-485 / RS-232 fieldbuses, and two CAN channels tie into CANopen or DeviceNet networks. The 256 KB flash stores the application ladder logic plus firmware-update partitions, while the 16 KB SRAM retains process variables through brown-out events. The 64-VQFN exposed-pad package gives an industrial 9x9 mm footprint that drops onto a DIN-rail PCB.
おすすめ
Uninterruptible Power Supply (UPS) Controller
The PIC24HJ256GP206A-E/MR runs the digital control loops inside a small-to-medium UPS, sampling the AC mains and battery voltage with its 12-bit A/D and synthesizing the inverter output through PWM. The 40 MIPS core easily executes the RMS-calculation, sine-PWM modulation, and battery-state-of-charge algorithm in real time. The 256 KB flash accommodates waveform tables and the 16 KB SRAM holds logging buffers. The two CAN modules enable UPS-to-system communication in data-center racks, and the -40C to +125C operating range survives the thermal environment inside the UPS chassis.
おすすめ
Medical Monitoring and Diagnostic Equipment
Patient monitors and benchtop diagnostic instruments benefit from the PIC24HJ256GP206A-E/MR's deterministic 16-bit core, 12-bit A/D, and rich timer resources. The 256 KB flash stores multi-lead ECG processing or blood-pressure cuff-control firmware, and the 16 KB SRAM buffers waveform samples at hundreds of Hz. The two UARTs drive Bluetooth or Wi-Fi modules for telemetry, while the 64-VQFN exposed-pad package fits the dense PCB layout of handheld devices. The AEC-Q100 silicon and enhanced temperature grade support diagnostic carts that move between AC-mains-powered and battery-powered environments.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: PIC24HJ256GP206A-E/MR — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | PIC24HJ256GP206A-I/MR | PIC24HJ256GP206A-H/MR | PIC24HJ128GP306A-I/MR | PIC24HJ128GP206A-E/MR |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-VQFN EP (9x9 mm) | 64-VQFN EP (9x9 mm) - same | 64-VQFN EP (9x9 mm) - same | 64-VQFN EP (9x9 mm) - same | 64-VQFN EP (9x9 mm) - same |
| Flash Memory | 256 KB | 256 KB | 256 KB | 128 KB | 128 KB |
| RAM | 16 KB | 16 KB | 16 KB | 16 KB | 16 KB |
| CPU Speed | 40 MIPS | 40 MIPS | 40 MIPS | 40 MIPS | 40 MIPS |
| Operating Temperature | -40C to +125C (E) | -40C to +85C (I) | -40C to +125C (H) | -40C to +85C (I) | -40C to +125C (E) |
| CAN Modules | 2 | 2 | 2 | 2 | 2 |
| A/D Converter | 12-bit, 16 ch | 12-bit, 16 ch | 12-bit, 16 ch | 12-bit, 16 ch | 12-bit, 16 ch |
| Supply Voltage | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V |
主な差別化要因
- Extended -40C to +125C operating range on the same silicon as the I grade （vs PIC24HJ256GP206A-I/MR)
- Automotive-grade AEC-Q100 silicon screening （vs PIC24HJ256GP206A-H/MR)
- Doubling of program flash versus the 128 KB family parts （vs PIC24HJ128GP306A-I/MR)
設計ノート
Estimated: the 64-VQFN exposed-pad (EP) package dissipates most of its heat through the central thermal pad. Per the Microchip PIC24HJ256GP206A datasheet, the EP must be soldered to a continuous VSS ground plane that uses at least sixteen thermal vias (0.3 mm diameter, 1.2 mm pitch) to the bottom-layer ground pour. Without the e-pad solder joint, junction temperature can rise 15-20 C for typical 40 MIPS workloads, threatening the -40C to +125C operating range.
Per the datasheet, place a 0.1 uF X7R ceramic decoupling capacitor adjacent to every VDD/VSS pin pair and a single 10 uF bulk ceramic near the VDD pin cluster. Estimated: at 40 MIPS core activity the PIC24HJ256GP206A-E/MR draws roughly 60-70 mA peak; a shared 10 uF bulk supports the high-current transients of simultaneous ADC sampling and CAN transmission without VDD sag. Add a ferrite bead if the part shares a 3.3 V rail with a switching converter.
Reserve the PGECx/PGEDx (programming/debug) pins in your layout so that an In-Circuit Debugger header can be added later; do not reuse them for GPIOs without a rework path. The SDO1 pin toggles at high frequency during ICSP programming per the northernsoftware.com page, so do not connect SDO1 to a sensitive analog input. Always configure unused I/O pins as outputs driven low per the datasheet's ESD/EMI recommendations.
When using both CAN modules simultaneously, place the MCP2551 or MCP2562 transceivers within 50 mm of the C1TX/C1RX and C2TX/C2RX pins and keep the CANH/CANL traces as a 100 ohm differential pair with no stubs. Match the trace length of the JTAG signals (TCK, TMS, TDI, TDO) to within 25 mm if the design will be programmed at production volumes; this prevents setup/hold errors during boundary-scan tests.
コンプライアンス情報
RoHS and lead-free per Microchip product page. AEC-Q100 qualified per Microchip automotive micro portfolio and Hotenda listing. Halogen-free status inferred from Microchip standard product marking; not explicitly stated in the provided web snippets.
