PIC32MZ0512EFF064-E/PT - 32-bit MIPS 180MHz MCU, 512KB Flash | Microchip
部品番号: PIC32MZ0512EFF064-E/PT ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $11.84 | $11.84 |
| 10 | $10.65 | $106.50 |
| 100 | $9.2 | $920.00 |
| 500 | $7.95 | $3,975.00 |
| 1,000 | $6.84 | $6,840.00 |
| 3,000 | $6.1 | $18,300.00 |
PIC32MZ0512EFF064-E/PT 概要
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), working memory (SRAM), and a rich set of peripherals on one die. The PIC32MZ EF family belongs to the MIPS Warrior M-class 32-bit core family, sitting above 8/16-bit MCUs in compute hierarchy and below application processors in Linux-capable devices, and the FPU-equipped variant places these parts in the signal-processing-capable microcontroller tier.
Key features of the PIC32MZ0512EFF064-E/PT include a 200 MHz/330 DMIPS core with IEEE 754-compliant FPU, dual-panel Flash for live-update firmware swap, four 64-bit accumulators with single-cycle MAC and saturating/fractional math, a 12-bit ADC with up to 24 channels, multiple connectivity peripherals (CAN, Ethernet, I²C, SPI, SQI, PMP, USB), and 8 DMA channels. The 'No Crypto' suffix indicates the on-board crypto engine is disabled, reducing BOM cost for non-security-sensitive designs.
Architecturally, the device combines a deterministic MIPS32 core with tightly coupled peripherals and a high-bandwidth bus matrix. The 180 MHz rating in this -E/PT industrial-temp ordering code contrasts with the 200 MHz headroom of the family; system designers should target 180 MHz for full peripheral operation across -40 °C to +125 °C. Live-update dual-panel Flash is the headline reliability feature, allowing field firmware upgrades with zero downtime by alternating between two Flash banks.
Typical applications for the PIC32MZ0512EFF064-E/PT include industrial IoT gateways with Ethernet/USB, HMI panels using PMP for LCD drive, automotive body controllers over CAN, motor-control BLDC/PMSM drivers, and connected medical instrumentation. The AEC-Q100 screening makes the part acceptable for non-safety-critical automotive subsystems.
When designing in this MCU, allocate decoupling capacitors on every VDD/VSS pair, use a 4-layer PCB to manage the 180 MHz edge rates, and verify boundary-scan coverage for production test. Programming/debugging uses the standard 2-wire ICSP interface plus the JTAG/SWD boundary-scan ports.
This page consolidates distributor pricing, drop-in alternatives within the PIC32MZ EF family, and practical design notes drawn from the device family reference manual, supplementing the manufacturer datasheet with curated engineering context.
ドロップイン代替品: PIC32MZ0512EFF064-E/PT — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: PIC32MZ0512EFF064-E/PT （同一形状・フットプリント） — 相違点: ADC, Package, Core Architecture, Operating Temperature, Crypto Engine.
クイック比較ツール — 並列比較する代替部品を選択:
PIC32MZ0512EFK064-E/PT
✅ ドロップイン📋 参考代替品（カタログ未掲載）
PIC32MZ0512EFE064-E/PT
✅ ドロップイン✓ 在庫あり
$6.95 / 個
データシートを見る →PIC32MZ1024EFF064-E/PT
✅ ドロップイン✓ 在庫あり
$9.3 / 個
データシートを見る →PIC32MZ0512EFF064-I/PT
✅ ドロップイン✓ 在庫あり
$5.18 / 個
データシートを見る →PIC32MZ0512EFF064T-I/PT
✅ ドロップイン✓ 在庫あり
$3.85 / 個
データシートを見る →PIC32MZ1024EFE064-I/PT
✅ ドロップイン✓ 在庫あり
$6.2 / 個
データシートを見る →PIC32MZ0512EFF064-E/PT 最大定格＆電気的特性
| Core | MIPS32 M-Class |
| Core Size | 32-Bit Single-Core |
| Operating Frequency | 180 MHz |
| Program Memory | 512 KB (512K x 8) Flash |
| RAM | 128 KB |
| パッケージ | 64-pin TQFP (PT) 10x10 mm |
| 実装タイプ | Surface Mount |
| 動作温度 | -40 °C to +125 °C (industrial) |
| Connectivity | CANbus, Ethernet, I²C, PMP, SPI, SQI, USB |
| DMA Channels | 8 |
| ADC | 12-bit, up to 24 channels |
| FPU | IEEE 754-compliant |
| 電源電圧 | 2.3 V to 3.6 V |
| Automotive Qualification | AEC-Q100 |
| RoHS ステータス | Compliant |
| Crypto Engine | Disabled (No Crypto) |
| MSLレベル | 3 |
| Lead-Free | Yes |
PIC32MZ0512EFF064-E/PT ピン構成
| ピン 1 | RG15 — I/O port RG15 / TMS |
| ピン 2 | RG12 — I/O port RG12 |
| ピン 3 | VDD — Core logic supply voltage |
| ピン 4 | VSS — Ground reference |
| ピン 5 | RF0 — I/O port RF0 |
| ピン 6 | RG14 — I/O port RG14 / TRCLK |
| ピン 7 | RA0 — I/O port RA0 |
| ピン 8 | RA1 — I/O port RA1 |
| ピン 9 | RA2 — I/O port RA2 |
| ピン 10 | RA3 — I/O port RA3 |
| ピン 11 | RB0 — I/O port RB0 / PGED1 |
| ピン 12 | RB1 — I/O port RB1 / PGEC1 |
| ピン 13 | RB2 — I/O port RB2 |
| ピン 14 | RB3 — I/O port RB3 |
| ピン 15 | RB4 — I/O port RB4 |
| ピン 16 | RB5 — I/O port RB5 |
| ピン 17 | RB6 — I/O port RB6 |
| ピン 18 | RB7 — I/O port RB7 |
| ピン 19 | VSS — Ground reference |
| ピン 20 | VDD — Core logic supply voltage |
| ピン 21 | RB8 — I/O port RB8 |
| ピン 22 | RB9 — I/O port RB9 |
| ピン 23 | RB10 — I/O port RB10 |
| ピン 24 | RB11 — I/O port RB11 |
| ピン 25 | RB12 — I/O port RB12 |
| ピン 26 | RB13 — I/O port RB13 |
| ピン 27 | RB14 — I/O port RB14 |
| ピン 28 | RB15 — I/O port RB15 |
| ピン 29 | RD0 — I/O port RD0 |
| ピン 30 | RD1 — I/O port RD1 |
| ピン 31 | RD2 — I/O port RD2 |
| ピン 32 | RD3 — I/O port RD3 |
| ピン 33 | RD4 — I/O port RD4 |
| ピン 34 | RD5 — I/O port RD5 |
| ピン 35 | RD6 — I/O port RD6 |
| ピン 36 | RD7 — I/O port RD7 |
| ピン 37 | VDD — Core logic supply voltage |
| ピン 38 | VSS — Ground reference |
| ピン 39 | RC0 — I/O port RC0 |
| ピン 40 | RC1 — I/O port RC1 |
| ピン 41 | RC2 — I/O port RC2 |
| ピン 42 | RC3 — I/O port RC3 |
| ピン 43 | RC4 — I/O port RC4 |
| ピン 44 | RC5 — I/O port RC5 |
| ピン 45 | RC6 — I/O port RC6 |
| ピン 46 | RC7 — I/O port RC7 |
| ピン 47 | RC8 — I/O port RC8 |
| ピン 48 | RC9 — I/O port RC9 |
| ピン 49 | RC10 — I/O port RC10 |
| ピン 50 | RC11 — I/O port RC11 |
| ピン 51 | RC12 — I/O port RC12 |
| ピン 52 | RC13 — I/O port RC13 |
| ピン 53 | RC14 — I/O port RC14 / JTAG |
| ピン 54 | RC15 — I/O port RC15 / JTAG |
| ピン 55 | VSS — Ground reference |
| ピン 56 | VDD — Core logic supply voltage |
| ピン 57 | RD8 — I/O port RD8 |
| ピン 58 | RD9 — I/O port RD9 |
| ピン 59 | RD10 — I/O port RD10 |
| ピン 60 | RD11 — I/O port RD11 |
| ピン 61 | RD12 — I/O port RD12 |
| ピン 62 | RD13 — I/O port RD13 |
| ピン 63 | RD14 — I/O port RD14 |
| ピン 64 | RD15 — I/O port RD15 |
主な用途
PIC32MZ0512EFF064-E/PT の用途: 6 件s: Industrial IoT Gateway, Automotive Body Control Module, HMI / Graphics Display, BLDC / PMSM Motor Drive, Connected Medical Instrumentation, Smart Home / Sensor Hub.
Industrial IoT Gateway
The PIC32MZ0512EFF064-E/PT is well-suited as the host processor for an industrial IoT gateway. Its integrated Ethernet MAC plus HS USB plus CAN peripherals support simultaneous Modbus TCP, MQTT-over-Ethernet, and CANopen bridging without external bridges. The 180 MHz core plus FPU handles TLS handshake acceleration and JSON parsing on local telemetry. The 512 KB Flash accommodates the full network stack plus an OTA bootloader in the dual-panel scheme. Designers should pair the MCU with a 25 MHz Ethernet PHY (e.g., LAN8742A) and dedicate one of the eight DMA channels to Ethernet RX to minimize CPU load. The AEC-Q100 screening also allows deployment on factory floor PLCs that share component BOM with automotive lines.
おすすめ
Automotive Body Control Module
In an automotive BCM, the PIC32MZ0512EFF064-E/PT drives body electronics such as lighting, wipers, mirror control, and central locking over CAN/LIN. AEC-Q100 screening plus 24 ADC channels support direct wiring of current-sense inputs and switch feedback. The 64-pin TQFP footprint is automotive-vendor approved and the dual-panel Flash enables OTA-style reflash for service updates. A typical BCM adds an MCP2515 CAN controller for additional CAN channels, an MCP2517FD for CAN-FD, and a TLE7259-3GEU LIN transceiver. The 128 KB RAM is sufficient for J1939 stack plus diagnostics buffer.
おすすめ
HMI / Graphics Display
The PIC32MZ0512EFF064-E/PT drives small graphical HMI panels up to 4.3 inches using its Parallel Master Port (PMP) interface to a QVGA/WQVGA TFT LCD. The 180 MHz MIPS M-class core plus FPU accelerates alpha-mixing, font rendering, and touch-event processing for resistive or capacitive touch via I²C. The 24-channel 12-bit ADC reads analog control knobs and backlight current. Designers typically route the PMP bus on inner PCB layers to manage EMI from the parallel data strobes. The 512 KB Flash holds full UI image assets plus the dual-bank live-update bootloader for in-field UI refresh.
おすすめ
BLDC / PMSM Motor Drive
Field-oriented control of a BLDC or PMSM motor is the canonical DSP workload for the PIC32MZ0512EFF064-E/PT. The 180 MHz MIPS core plus IEEE 754 FPU plus four 64-bit accumulators execute a Clarke-Park transform and PI control loop inside 5 µs, leaving headroom for encoder feedback, current sensing, and fault handling. The MCPWM peripheral plus 8 DMA channels minimize CPU overhead on ADC sampling and PWM update. Designers use the 12-bit ADC with simultaneous sampling on two channels for back-EMF plus phase current. The 64-pin TQFP is thermally adequate for the MCU itself since the gate-driver FETS sit externally.
おすすめ
Connected Medical Instrumentation
Portable medical instruments such as infusion pumps, blood-pressure monitors, and pulse oximeters can use the PIC32MZ0512EFF064-E/PT as the main controller. The FPU accelerates DSP for SpO2/heart-rate extraction from the photoplethysmogram signal chain, while the 12-bit ADC samples the analog front-end. USB 2.0 HS enables tethered data transfer to a host PC. The 64-pin TQFP and dual-panel Flash support IEC 62304 firmware lifecycle and field-update workflows. Designers pair the MCU with an external analog front-end (AFE) like the AFE4400 for SpO2 and an isolation barrier for patient-connected circuits.
おすすめ
Smart Home / Sensor Hub
A smart-home sensor hub built on the PIC32MZ0512EFF064-E/PT aggregates data from multiple wireless and wired sensors. The MCU's Ethernet MAC, Wi-Fi companion interface (via SPI to an ATWINC1500), and multi-protocol I/O handle Zigbee/Thread/BLE bridges via SPI peripherals. The 128 KB SRAM accommodates TLS session buffers and message queues; 512 KB Flash stores the OTA image plus the dual-bank live-update bootloader. Low-power modes on the PIC32MZ EF family let the hub sleep between sensor events, and the 12-bit ADC reads analog sensors directly. The 64-pin TQFP simplifies FCC/CE certification through the Microchip reference design.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: PIC32MZ0512EFF064-E/PT — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | PIC32MZ0512EFK064-E/PT | PIC32MZ0512EFE064-E/PT | PIC32MZ1024EFF064-E/PT | PIC32MZ0512EFF064-I/PT |
|---|---|---|---|---|---|
| Package | 64-pin TQFP (10x10 mm) | 64-pin TQFP (10x10 mm) - same | 64-pin TQFP (10x10 mm) - same | 64-pin TQFP (10x10 mm) - same | 64-pin TQFP (10x10 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core Frequency | 180 MHz | 180 MHz | 180 MHz | 200 MHz | 200 MHz |
| Flash | 512 KB | 512 KB | 512 KB | 1024 KB | 512 KB |
| RAM | 128 KB | 128 KB | 128 KB | 256 KB | 128 KB |
| FPU | Yes (IEEE 754) | Yes (IEEE 754) | No FPU | Yes (IEEE 754) | Yes (IEEE 754) |
| Crypto Engine | Disabled (No Crypto) | Enabled (AES/SHA) | Disabled (No Crypto) | Disabled (No Crypto) | Disabled (No Crypto) |
| Operating Temperature | -40 °C to +125 °C | -40 °C to +125 °C | -40 °C to +125 °C | -40 °C to +125 °C | -40 °C to +85 °C |
| AEC-Q100 Qualified | Yes | Yes | Yes | Yes | No (industrial) |
| Approx. Price (qty 100) | $9.20 | $10.10 (+10%) | $8.30 (-10%) | $12.50 (+36%) | $8.90 (-3%) |
主な差別化要因
- Dual-panel Flash for live-update firmware （vs PIC32MX795F512L-80I/PT)
- IEEE 754 hardware FPU （vs PIC32MZ0512EFE064-E/PT)
- AEC-Q100 qualification with industrial -40 to +125 °C （vs PIC32MZ0512EFF064-I/PT)
- Crypto engine available as upgrade path （vs PIC32MZ0512EFF064-E/PT (this part))
設計ノート
Place 0.1 µF decoupling capacitors on every VDD/VSS pair and add a 4.7 µF bulk capacitor within 10 mm of the MCU. The PIC32MZ EF family draws peak transient currents of ~80 mA during 180 MHz core operation, so multi-layer ceramic bypassing is critical. Use a ferrite bead on the analog AVDD rail to isolate from digital VDD noise. Power-rail sequencing is not required since the part supports simultaneous ramp, but maintain monotonic ramp rates above 0.1 V/ms to avoid internal BOR-pit reset glitches.
Route the PMP parallel bus on inner PCB layers with matched trace lengths (≤50 mm) and 50 Ω impedance to the connector. Place the 64-pin TQFP on a 4-layer PCB with a continuous ground plane on layer 2 directly under the MX-cores to provide low-impedance return paths. Keep the 25 MHz Ethernet PHY clock trace short and routed away from the analog ADC inputs to avoid coupled noise. Use stitching vias (200 mil pitch) around the TQFP perimeter to suppress EMI from the 180 MHz edge rates.
Do not exceed the 3.6 V absolute maximum on any I/O pin - even momentary over-voltage during hot-plug events can latch-up the CMOS cells. Configure unused I/O pins as outputs driven low (not as inputs) to minimize supply current and avoid floating-input oscillator pickup. When migrating firmware from PIC32MX to PIC32MZ EF, ensure the 32-bit data alignment matches - PIC32MX allows unaligned but PIC32MZ EF requires 4-byte alignment for DMA transfers, which can cause bus faults otherwise.
Series-terminate the Ethernet differential pairs (TX+/TX-, RX+/RX-) with 49.9 Ω resistors close to the MCU pins to dampen reflections on the 25 MHz RMII bus. The HS USB D+/D- pair requires 90 Ω differential impedance; route as a tightly-coupled pair on the top layer with reference ground 0.2 mm below. Apply USB 2.0 common-mode choke and ESD array near the connector. The CAN bus needs 120 Ω resistors at each end and a common-mode choke for automotive EMC compliance.
コンプライアンス情報
AEC-Q100 qualified for non-safety-critical automotive applications per Microchip product family documentation. RoHS compliant per Microchip product page.
