PIC32MZ0512EFF064-E/PT - 32-bit MIPS 180MHz MCU, 512KB Flash | Microchip
Артикул: PIC32MZ0512EFF064-E/PT ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $11.84 | $11,84 |
| 10 | $10.65 | $106,50 |
| 100 | $9.2 | $920,00 |
| 500 | $7.95 | $3.975,00 |
| 1.000 | $6.84 | $6.840,00 |
| 3.000 | $6.1 | $18.300,00 |
PIC32MZ0512EFF064-E/PT Обзор
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), working memory (SRAM), and a rich set of peripherals on one die. The PIC32MZ EF family belongs to the MIPS Warrior M-class 32-bit core family, sitting above 8/16-bit MCUs in compute hierarchy and below application processors in Linux-capable devices, and the FPU-equipped variant places these parts in the signal-processing-capable microcontroller tier.
Key features of the PIC32MZ0512EFF064-E/PT include a 200 MHz/330 DMIPS core with IEEE 754-compliant FPU, dual-panel Flash for live-update firmware swap, four 64-bit accumulators with single-cycle MAC and saturating/fractional math, a 12-bit ADC with up to 24 channels, multiple connectivity peripherals (CAN, Ethernet, I²C, SPI, SQI, PMP, USB), and 8 DMA channels. The 'No Crypto' suffix indicates the on-board crypto engine is disabled, reducing BOM cost for non-security-sensitive designs.
Architecturally, the device combines a deterministic MIPS32 core with tightly coupled peripherals and a high-bandwidth bus matrix. The 180 MHz rating in this -E/PT industrial-temp ordering code contrasts with the 200 MHz headroom of the family; system designers should target 180 MHz for full peripheral operation across -40 °C to +125 °C. Live-update dual-panel Flash is the headline reliability feature, allowing field firmware upgrades with zero downtime by alternating between two Flash banks.
Typical applications for the PIC32MZ0512EFF064-E/PT include industrial IoT gateways with Ethernet/USB, HMI panels using PMP for LCD drive, automotive body controllers over CAN, motor-control BLDC/PMSM drivers, and connected medical instrumentation. The AEC-Q100 screening makes the part acceptable for non-safety-critical automotive subsystems.
When designing in this MCU, allocate decoupling capacitors on every VDD/VSS pair, use a 4-layer PCB to manage the 180 MHz edge rates, and verify boundary-scan coverage for production test. Programming/debugging uses the standard 2-wire ICSP interface plus the JTAG/SWD boundary-scan ports.
This page consolidates distributor pricing, drop-in alternatives within the PIC32MZ EF family, and practical design notes drawn from the device family reference manual, supplementing the manufacturer datasheet with curated engineering context.
Аналоги без доработки для PIC32MZ0512EFF064-E/PT — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC32MZ0512EFF064-E/PT (тот же форм-фактор и посадочное место) — отличается по ADC, Package, Core Architecture, Operating Temperature, Crypto Engine.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
PIC32MZ0512EFK064-E/PT
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC32MZ0512EFE064-E/PT
✅ Прямая замена✓ В наличии
$6.95 / шт.
Открыть даташит →PIC32MZ1024EFF064-E/PT
✅ Прямая замена✓ В наличии
$9.3 / шт.
Открыть даташит →PIC32MZ0512EFF064-I/PT
✅ Прямая замена✓ В наличии
$5.18 / шт.
Открыть даташит →PIC32MZ0512EFF064T-I/PT
✅ Прямая замена✓ В наличии
$3.85 / шт.
Открыть даташит →PIC32MZ1024EFE064-I/PT
✅ Прямая замена✓ В наличии
$6.2 / шт.
Открыть даташит →PIC32MZ0512EFF064-E/PT Максимальные параметры и электрические характеристики
| Core | MIPS32 M-Class |
| Core Size | 32-Bit Single-Core |
| Operating Frequency | 180 MHz |
| Program Memory | 512 KB (512K x 8) Flash |
| RAM | 128 KB |
| Корпус | 64-pin TQFP (PT) 10x10 mm |
| Тип монтажа | Surface Mount |
| Рабочая температура | -40 °C to +125 °C (industrial) |
| Connectivity | CANbus, Ethernet, I²C, PMP, SPI, SQI, USB |
| DMA Channels | 8 |
| ADC | 12-bit, up to 24 channels |
| FPU | IEEE 754-compliant |
| Напряжение питания | 2.3 V to 3.6 V |
| Automotive Qualification | AEC-Q100 |
| Статус RoHS | Compliant |
| Crypto Engine | Disabled (No Crypto) |
| Уровень MSL | 3 |
| Lead-Free | Yes |
Конфигурация выводов PIC32MZ0512EFF064-E/PT
| Контакт 1 | RG15 — I/O port RG15 / TMS |
| Контакт 2 | RG12 — I/O port RG12 |
| Контакт 3 | VDD — Core logic supply voltage |
| Контакт 4 | VSS — Ground reference |
| Контакт 5 | RF0 — I/O port RF0 |
| Контакт 6 | RG14 — I/O port RG14 / TRCLK |
| Контакт 7 | RA0 — I/O port RA0 |
| Контакт 8 | RA1 — I/O port RA1 |
| Контакт 9 | RA2 — I/O port RA2 |
| Контакт 10 | RA3 — I/O port RA3 |
| Контакт 11 | RB0 — I/O port RB0 / PGED1 |
| Контакт 12 | RB1 — I/O port RB1 / PGEC1 |
| Контакт 13 | RB2 — I/O port RB2 |
| Контакт 14 | RB3 — I/O port RB3 |
| Контакт 15 | RB4 — I/O port RB4 |
| Контакт 16 | RB5 — I/O port RB5 |
| Контакт 17 | RB6 — I/O port RB6 |
| Контакт 18 | RB7 — I/O port RB7 |
| Контакт 19 | VSS — Ground reference |
| Контакт 20 | VDD — Core logic supply voltage |
| Контакт 21 | RB8 — I/O port RB8 |
| Контакт 22 | RB9 — I/O port RB9 |
| Контакт 23 | RB10 — I/O port RB10 |
| Контакт 24 | RB11 — I/O port RB11 |
| Контакт 25 | RB12 — I/O port RB12 |
| Контакт 26 | RB13 — I/O port RB13 |
| Контакт 27 | RB14 — I/O port RB14 |
| Контакт 28 | RB15 — I/O port RB15 |
| Контакт 29 | RD0 — I/O port RD0 |
| Контакт 30 | RD1 — I/O port RD1 |
| Контакт 31 | RD2 — I/O port RD2 |
| Контакт 32 | RD3 — I/O port RD3 |
| Контакт 33 | RD4 — I/O port RD4 |
| Контакт 34 | RD5 — I/O port RD5 |
| Контакт 35 | RD6 — I/O port RD6 |
| Контакт 36 | RD7 — I/O port RD7 |
| Контакт 37 | VDD — Core logic supply voltage |
| Контакт 38 | VSS — Ground reference |
| Контакт 39 | RC0 — I/O port RC0 |
| Контакт 40 | RC1 — I/O port RC1 |
| Контакт 41 | RC2 — I/O port RC2 |
| Контакт 42 | RC3 — I/O port RC3 |
| Контакт 43 | RC4 — I/O port RC4 |
| Контакт 44 | RC5 — I/O port RC5 |
| Контакт 45 | RC6 — I/O port RC6 |
| Контакт 46 | RC7 — I/O port RC7 |
| Контакт 47 | RC8 — I/O port RC8 |
| Контакт 48 | RC9 — I/O port RC9 |
| Контакт 49 | RC10 — I/O port RC10 |
| Контакт 50 | RC11 — I/O port RC11 |
| Контакт 51 | RC12 — I/O port RC12 |
| Контакт 52 | RC13 — I/O port RC13 |
| Контакт 53 | RC14 — I/O port RC14 / JTAG |
| Контакт 54 | RC15 — I/O port RC15 / JTAG |
| Контакт 55 | VSS — Ground reference |
| Контакт 56 | VDD — Core logic supply voltage |
| Контакт 57 | RD8 — I/O port RD8 |
| Контакт 58 | RD9 — I/O port RD9 |
| Контакт 59 | RD10 — I/O port RD10 |
| Контакт 60 | RD11 — I/O port RD11 |
| Контакт 61 | RD12 — I/O port RD12 |
| Контакт 62 | RD13 — I/O port RD13 |
| Контакт 63 | RD14 — I/O port RD14 |
| Контакт 64 | RD15 — I/O port RD15 |
Типичное применение
PIC32MZ0512EFF064-E/PT подходит для 6 применениеs: Industrial IoT Gateway, Automotive Body Control Module, HMI / Graphics Display, BLDC / PMSM Motor Drive, Connected Medical Instrumentation, Smart Home / Sensor Hub.
Industrial IoT Gateway
The PIC32MZ0512EFF064-E/PT is well-suited as the host processor for an industrial IoT gateway. Its integrated Ethernet MAC plus HS USB plus CAN peripherals support simultaneous Modbus TCP, MQTT-over-Ethernet, and CANopen bridging without external bridges. The 180 MHz core plus FPU handles TLS handshake acceleration and JSON parsing on local telemetry. The 512 KB Flash accommodates the full network stack plus an OTA bootloader in the dual-panel scheme. Designers should pair the MCU with a 25 MHz Ethernet PHY (e.g., LAN8742A) and dedicate one of the eight DMA channels to Ethernet RX to minimize CPU load. The AEC-Q100 screening also allows deployment on factory floor PLCs that share component BOM with automotive lines.
Рекомендуется
Automotive Body Control Module
In an automotive BCM, the PIC32MZ0512EFF064-E/PT drives body electronics such as lighting, wipers, mirror control, and central locking over CAN/LIN. AEC-Q100 screening plus 24 ADC channels support direct wiring of current-sense inputs and switch feedback. The 64-pin TQFP footprint is automotive-vendor approved and the dual-panel Flash enables OTA-style reflash for service updates. A typical BCM adds an MCP2515 CAN controller for additional CAN channels, an MCP2517FD for CAN-FD, and a TLE7259-3GEU LIN transceiver. The 128 KB RAM is sufficient for J1939 stack plus diagnostics buffer.
Рекомендуется
HMI / Graphics Display
The PIC32MZ0512EFF064-E/PT drives small graphical HMI panels up to 4.3 inches using its Parallel Master Port (PMP) interface to a QVGA/WQVGA TFT LCD. The 180 MHz MIPS M-class core plus FPU accelerates alpha-mixing, font rendering, and touch-event processing for resistive or capacitive touch via I²C. The 24-channel 12-bit ADC reads analog control knobs and backlight current. Designers typically route the PMP bus on inner PCB layers to manage EMI from the parallel data strobes. The 512 KB Flash holds full UI image assets plus the dual-bank live-update bootloader for in-field UI refresh.
Рекомендуется
BLDC / PMSM Motor Drive
Field-oriented control of a BLDC or PMSM motor is the canonical DSP workload for the PIC32MZ0512EFF064-E/PT. The 180 MHz MIPS core plus IEEE 754 FPU plus four 64-bit accumulators execute a Clarke-Park transform and PI control loop inside 5 µs, leaving headroom for encoder feedback, current sensing, and fault handling. The MCPWM peripheral plus 8 DMA channels minimize CPU overhead on ADC sampling and PWM update. Designers use the 12-bit ADC with simultaneous sampling on two channels for back-EMF plus phase current. The 64-pin TQFP is thermally adequate for the MCU itself since the gate-driver FETS sit externally.
Рекомендуется
Connected Medical Instrumentation
Portable medical instruments such as infusion pumps, blood-pressure monitors, and pulse oximeters can use the PIC32MZ0512EFF064-E/PT as the main controller. The FPU accelerates DSP for SpO2/heart-rate extraction from the photoplethysmogram signal chain, while the 12-bit ADC samples the analog front-end. USB 2.0 HS enables tethered data transfer to a host PC. The 64-pin TQFP and dual-panel Flash support IEC 62304 firmware lifecycle and field-update workflows. Designers pair the MCU with an external analog front-end (AFE) like the AFE4400 for SpO2 and an isolation barrier for patient-connected circuits.
Рекомендуется
Smart Home / Sensor Hub
A smart-home sensor hub built on the PIC32MZ0512EFF064-E/PT aggregates data from multiple wireless and wired sensors. The MCU's Ethernet MAC, Wi-Fi companion interface (via SPI to an ATWINC1500), and multi-protocol I/O handle Zigbee/Thread/BLE bridges via SPI peripherals. The 128 KB SRAM accommodates TLS session buffers and message queues; 512 KB Flash stores the OTA image plus the dual-bank live-update bootloader. Low-power modes on the PIC32MZ EF family let the hub sleep between sensor events, and the 12-bit ADC reads analog sensors directly. The 64-pin TQFP simplifies FCC/CE certification through the Microchip reference design.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC32MZ0512EFF064-E/PT — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC32MZ0512EFK064-E/PT | PIC32MZ0512EFE064-E/PT | PIC32MZ1024EFF064-E/PT | PIC32MZ0512EFF064-I/PT |
|---|---|---|---|---|---|
| Package | 64-pin TQFP (10x10 mm) | 64-pin TQFP (10x10 mm) - same | 64-pin TQFP (10x10 mm) - same | 64-pin TQFP (10x10 mm) - same | 64-pin TQFP (10x10 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core Frequency | 180 MHz | 180 MHz | 180 MHz | 200 MHz | 200 MHz |
| Flash | 512 KB | 512 KB | 512 KB | 1024 KB | 512 KB |
| RAM | 128 KB | 128 KB | 128 KB | 256 KB | 128 KB |
| FPU | Yes (IEEE 754) | Yes (IEEE 754) | No FPU | Yes (IEEE 754) | Yes (IEEE 754) |
| Crypto Engine | Disabled (No Crypto) | Enabled (AES/SHA) | Disabled (No Crypto) | Disabled (No Crypto) | Disabled (No Crypto) |
| Operating Temperature | -40 °C to +125 °C | -40 °C to +125 °C | -40 °C to +125 °C | -40 °C to +125 °C | -40 °C to +85 °C |
| AEC-Q100 Qualified | Yes | Yes | Yes | Yes | No (industrial) |
| Approx. Price (qty 100) | $9.20 | $10.10 (+10%) | $8.30 (-10%) | $12.50 (+36%) | $8.90 (-3%) |
Ключевые отличия
- Dual-panel Flash for live-update firmware (против PIC32MX795F512L-80I/PT)
- IEEE 754 hardware FPU (против PIC32MZ0512EFE064-E/PT)
- AEC-Q100 qualification with industrial -40 to +125 °C (против PIC32MZ0512EFF064-I/PT)
- Crypto engine available as upgrade path (против PIC32MZ0512EFF064-E/PT (this part))
Заметки по проектированию
Place 0.1 µF decoupling capacitors on every VDD/VSS pair and add a 4.7 µF bulk capacitor within 10 mm of the MCU. The PIC32MZ EF family draws peak transient currents of ~80 mA during 180 MHz core operation, so multi-layer ceramic bypassing is critical. Use a ferrite bead on the analog AVDD rail to isolate from digital VDD noise. Power-rail sequencing is not required since the part supports simultaneous ramp, but maintain monotonic ramp rates above 0.1 V/ms to avoid internal BOR-pit reset glitches.
Route the PMP parallel bus on inner PCB layers with matched trace lengths (≤50 mm) and 50 Ω impedance to the connector. Place the 64-pin TQFP on a 4-layer PCB with a continuous ground plane on layer 2 directly under the MX-cores to provide low-impedance return paths. Keep the 25 MHz Ethernet PHY clock trace short and routed away from the analog ADC inputs to avoid coupled noise. Use stitching vias (200 mil pitch) around the TQFP perimeter to suppress EMI from the 180 MHz edge rates.
Do not exceed the 3.6 V absolute maximum on any I/O pin - even momentary over-voltage during hot-plug events can latch-up the CMOS cells. Configure unused I/O pins as outputs driven low (not as inputs) to minimize supply current and avoid floating-input oscillator pickup. When migrating firmware from PIC32MX to PIC32MZ EF, ensure the 32-bit data alignment matches - PIC32MX allows unaligned but PIC32MZ EF requires 4-byte alignment for DMA transfers, which can cause bus faults otherwise.
Series-terminate the Ethernet differential pairs (TX+/TX-, RX+/RX-) with 49.9 Ω resistors close to the MCU pins to dampen reflections on the 25 MHz RMII bus. The HS USB D+/D- pair requires 90 Ω differential impedance; route as a tightly-coupled pair on the top layer with reference ground 0.2 mm below. Apply USB 2.0 common-mode choke and ESD array near the connector. The CAN bus needs 120 Ω resistors at each end and a common-mode choke for automotive EMC compliance.
Информация о соответствии
AEC-Q100 qualified for non-safety-critical automotive applications per Microchip product family documentation. RoHS compliant per Microchip product page.
