R5F101LJAFB#30 - 32MHz 256KB 16-Bit MCU | Renesas
部品番号: R5F101LJAFB#30 ✓ 生産中R5F101LJAFB#30 概要
A microcontroller is a programmable semiconductor device that integrates a CPU, memory, peripherals, and I/O into one integrated circuit. Within the embedded-control hierarchy, this device belongs to the Renesas RL78 family of low-power MCUs, combining general-purpose processing, real-time control, and energy-efficient operation in a surface-mount package.
Key characteristics of the R5F101LJAFB#30 include its 16-bit CPU architecture, 32 MHz operating frequency, and 256 KB flash memory. The 64-LFQFP package provides 64 external connection points for power, ground, clock signals, communications, analog functions, and general-purpose I/O. The manufacturer listing specifies a temperature range of -40 to +85 degrees Celsius for this ordering code.
The RL78/G13 architecture is intended for embedded applications requiring efficient code execution and low-power peripheral control. Firmware can be stored in the 256 KB flash array, while the integrated MCU resources support connected sensing, actuator control, communications, and general industrial logic. Exact RAM capacity, peripheral assignments, clock options, and electrical limits must be confirmed in the manufacturer datasheet for the exact suffix.
Typical uses for the R5F101LJAFB#30 include industrial control modules, appliance controllers, building automation equipment, motor-control peripherals, sensor nodes, and compact consumer products. Its combination of 32 MHz processing speed and 256 KB flash suits control loops that need more program memory than a small entry-level MCU while retaining a compact 10 x 10 mm footprint.
PCB design should preserve the manufacturer's recommended decoupling, clock, programming, reset, and exposed-land configuration. Confirm the pad layout and pin assignments before routing because package suffixes can affect terminal assignments, operating limits, and programming details. Use the exact manufacturer pinout and recommended land pattern rather than relying on a generic 64-pin LQFP drawing.
This page organizes the verified device identity, key electrical and packaging facts, sourcing information, application guidance, and design considerations. It also separates confirmed parameters from those requiring datasheet confirmation so engineers can plan a 64-LFQFP embedded-control design without making unsupported assumptions.
ドロップイン代替品: R5F101LJAFB#30 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
R5F101LGAFB#30
✅ ドロップイン📋 参考代替品(カタログ未掲載)
R5F101LJAFB#30 最大定格&電気的特性
| Product Type | 16-bit microcontroller |
| Product Series | RL78/G13 |
| CPU Frequency | 32 MHz |
| Flash Memory | 256 KB |
| Flash Organization | 256K x 8 bits |
| Package Type | 64-LFQFP |
| Package Dimensions | 10 x 10 mm |
| 動作温度範囲 | -40 to +85 degrees Celsius |
| 実装タイプ | Surface mount |
| Core Architecture | 16-bit |
R5F101LJAFB#30 10 x 10 mm ピン配置ガイド
R5F101LJAFB#30 (10 x 10 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: R5F101LJAFB#30.
詳細は データシート をご参照ください。
主な用途
R5F101LJAFB#30 の用途: 6 件s: Industrial Control Module, Appliance Controller, Building Automation Node, Sensor and Measurement Hub, Motor-Control Peripheral, Connected Consumer Device.
Industrial Control Module
The R5F101LJAFB#30 fits compact industrial control modules that combine a 32 MHz, 16-bit CPU with 256 KB of firmware storage. Its confirmed -40 to +85 degrees Celsius rating supports equipment operating across widely varying indoor and industrial ambient conditions, while the 64-LFQFP package preserves routing density on a multilayer control board. The MCU can coordinate sensor inputs, digital control outputs, and communication tasks when its exact I/O and timer assignments match the design. The 256 KB flash is useful for structured firmware, parameter tables, and diagnostics rather than simply a minimal boot program. Before final schematic approval, confirm supply voltage, peripheral multiplexing, programming signals, and watchdog behavior against the exact manufacturer documentation.
おすすめ
Appliance Controller
The R5F101LJAFB#30 is appropriate for an appliance controller requiring more firmware capability than a basic logic device. Its 16-bit CPU operating at 32 MHz can coordinate motor commands, temperature measurements, key inputs, displays, and safety-state handling, while 256 KB flash provides practical space for application code, calibration data, and diagnostic routines. The 64-LFQFP, 10 x 10 mm package allows the controller to remain compact when relays, communication electronics, and power-conversion circuitry occupy the same board. Because appliance platforms may require specific timing, communications, and safety functions, verify the available timers, serial interfaces, ADC characteristics, and power rails before assigning the device to a production design.
おすすめ
Building Automation Node
The R5F101LJAFB#30 can support a building-automation node that reads environmental inputs and controls lighting, HVAC interfaces, or occupancy-related equipment. A 32 MHz processor provides useful headroom for protocol handling, local filtering, and diagnostic behavior, and the 256 KB flash can hold networking and application firmware. Its -40 to +85 degrees Celsius specification is compatible with many indoor equipment enclosures, although the final enclosure temperature must remain within the device limits. The 64-LFQFP package also allows direct placement in a controller board without requiring a very large footprint. Confirm the candidate's communications peripherals, I/O voltage, clock accuracy, and low-power behavior in the manufacturer datasheet before choosing it over another RL78 member.
おすすめ
Sensor and Measurement Hub
The R5F101LJAFB#30 is suitable for a sensor hub that gathers measurements, performs local calculations, and forwards results to a wider control network. Its 16-bit architecture and 32 MHz operating speed can support time-based acquisition loops and protocol processing, while 256 KB flash accommodates acquisition firmware, calibration coefficients, and field-upgrade logic. The 64-LFQFP package provides a practical balance between pin availability and compact board area for multi-sensor equipment. Exact analog performance must be checked before using its ADC for precision measurements, and the chosen sensor interfaces must not conflict with pins reserved for programming, reset, clocking, or power. Validation should also cover noise, grounding, reference stability, and the operating-temperature margin of the complete assembly.
おすすめ
Motor-Control Peripheral
The R5F101LJAFB#30 can act as the supervisory controller in a motor-control peripheral when the main power stage performs current conversion and the MCU handles commands, sequencing, and fault reporting. The 32 MHz, 16-bit core is capable of executing deterministic control and communication routines, and 256 KB flash provides room for complex state machines and diagnostic tables. The 64-LFQFP package offers enough pins for encoder inputs, control signals, and communications while maintaining a compact module. This role must still be checked against the MCU's exact timer outputs, capture features, interrupts, and supply requirements. Protection coordination, watchdog behavior, isolation boundaries, and safe-state handling should be validated at the complete motor-drive level rather than inferred from the MCU headline specifications.
おすすめ
Connected Consumer Device
The R5F101LJAFB#30 supports compact consumer devices that combine local interaction, firmware-driven behavior, and optional network connectivity. Its 32 MHz processing rate can handle user-interface logic and communication tasks, while 256 KB flash allows a meaningful application layer rather than only basic boot code. The 10 x 10 mm 64-LFQFP package is useful in space-constrained products, although exposed-pad layout, assembly tolerances, and thermal performance must be coordinated with the board designer. A production release should confirm the exact serial interfaces, memory requirements, power modes, and peripheral assignments. If the enclosure is exposed to temperature beyond -40 to +85 degrees Celsius, additional thermal design or a different device grade is necessary rather than relying on the MCU alone.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: R5F101LJAFB#30 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | R5F101LGAFB#30 |
|---|---|---|
| Manufacturer | Renesas Electronics | Renesas Electronics |
| Package | 64-LFQFP, 10 x 10 mm | 64-LFQFP; confirm exact package dimensions |
| Product Series | RL78/G13 | RL78/G13 |
| CPU Architecture | 16-bit | 16-bit RL78 architecture |
| Maximum CPU Frequency | 32 MHz | 32 MHz |
主な差別化要因
- Confirmed 256 KB flash configuration (vs R5F101LGAFB#30)
- Exact package and body size identified (vs R5F101LGAFB#30)
- Confirmed commercial temperature grade (vs R5F101LGAFB#30)
設計ノート
Use the exact 64-LFQFP land pattern and pin table for R5F101LJAFB#30 rather than a generic LQFP footprint. A 64-pin package leaves little tolerance for package-family differences, and power, ground, programming, reset, clock, and analog pins must match the device-specific drawing. Preserve the manufacturer's exposed-pad and solder-mask recommendations, and verify the 10 x 10 mm body against the PCB footprint and paste stencil before release.
Calculate the board's power-tree requirements before assigning the MCU supply. Although the operating-voltage limits are not listed for this ordering code, every external rail must remain within the manufacturer limits under startup, maximum CPU activity, peripheral load, and temperature. Place the required bypass capacitors at their specified pins with short, low-impedance return paths. Separate analog and noisy switching nodes where the datasheet layout guidance calls for it.
Do not treat every R5F101LJAFB or RL78/G13 ordering code as electrically and pin compatible. The suffix can select package, temperature, flash, and other configuration options. For a replacement, compare the complete pin-description table, memory sizes, peripheral instances, interrupt vectors, programming interface, electrical limits, and package drawing. A family designation and matching 64-pin count alone are insufficient evidence for a drop-in production substitution.
Route clock and reset signals with short paths and avoid coupling them to switching nodes or high-current relay traces. Keep programming and debug access reachable for manufacturing, and maintain clean grounding around analog-capable pins. If the board contains motors, relays, or power converters, separate their return currents from the MCU ground reference where practical and validate timing behavior under the worst-case electromagnetic environment.
コンプライアンス情報
The exact ordering code is listed for -40 to +85 degrees Celsius operation. RoHS, REACH, lead-free, halogen-free, and conflict-minerals statements require confirmation from the manufacturer product documentation.