S912XET512J2VAGR - 16-bit S12X MCU 512KB 50MHz | NXP
部品番号: S912XET512J2VAGR ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $1 | $1.00 |
| 10 | $10.62 | $106.20 |
| 100 | $9.44 | $944.00 |
| 500 | $8.5 | $4,250.00 |
| 1,000 | $7.67 | $7,670.00 |
S912XET512J2VAGR 概要
A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, memory, and programmable peripherals into one chip, forming the lowest tier of the embedded processing hierarchy: MCU -> embedded processor -> microprocessor -> system-on-chip. The HCS12X family extends the industry-proven S12 architecture with an enhanced XGATE co-processor module that offloads interrupt servicing and communication tasks from the main S12X core, increasing effective throughput for body, chassis, and industrial control workloads.
Key features of the S912XET512J2VAGR include 512KB (512K x 8) of on-chip Flash program memory, 16-bit S12X CPU core clocked at 50MHz, serial interfaces including SPI and SCI for peripheral connectivity, a watchdog timer and oscillator/timer blocks for robust system supervision, and industrial/automotive grade temperature qualification to +105C. The 144-terminal LQFP provides a high I/O count suitable for motor control, networking gateways, and multi-peripheral system designs.
The S12X architecture preserves upward compatibility from the classic S12/HCS12 family, allowing reuse of proven firmware while gaining the XGATE peripheral co-processor and extended addressing. The device integrates voltage regulation, clock generation, and multiple timer channels, reducing external component count and bill-of-material cost in body electronics and industrial automation nodes.
Typical applications include automotive body control modules, instrument clusters, HVAC controllers, gateway nodes on CAN/LIN networks, industrial motor control, and building automation systems where 16-bit processing depth and high Flash density are required without the cost of a 32-bit device.
When designing with this MCU, budget Flash for bootloader plus application and verify that the +105C junction condition is respected in high ambient enclosures; consider the J3 temperature grade variant if higher ambient temperatures are expected.
This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet, giving procurement and engineering teams a single citable reference.
ドロップイン代替品: S912XET512J2VAGR — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: S912XET512J2VAGR （同一形状・フットプリント） — 相違点: Package, ADC, Operating Temperature, Core Architecture, Supply Voltage.
クイック比較ツール — 並列比較する代替部品を選択:
S912XET512J2VAG
✅ ドロップイン📋 参考代替品（カタログ未掲載）
S912XET512J3MAGR
✅ ドロップイン✓ 在庫あり
$16.4 / 個
データシートを見る →S912XET512J1VAGR
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
S912XET256J2VAGR
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
S912XET512J2VAGR 最大定格＆電気的特性
| Core Architecture | 16-bit HCS12X (S12X core) |
| Core Frequency | 50 MHz |
| Flash Memory | 512 KB (512K x 8) |
| 動作温度 | -40C to +105C |
| Qualification | Automotive Qualified |
| Temperature Grade | Industrial (per distributor listing) |
| パッケージ | 144-LQFP (LFQFP), 20x20 mm square |
| Terminal Form | Gull Wing |
| Number of Terminals | 144 |
| Package Shape | Square |
| 実装タイプ | Surface Mount |
| Watchdog Timer | Yes (watchdog OSC/Timer per distributor listing) |
S912XET512J2VAGR square ピン配置ガイド
S912XET512J2VAGR (square パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: S912XET512J2VAGR.
詳細は データシート をご参照ください。
主な用途
S912XET512J2VAGR の用途: 6 件s: Automotive Body Control Modules, Instrument Clusters, Industrial Motor Control, CAN/LIN Network Gateway Nodes, HVAC and Blower Controllers, Building Automation and Access Control.
Automotive Body Control Modules
The S912XET512J2VAGR fits body control modules (BCM) because it combines a 50MHz 16-bit S12X core with 512KB Flash and a 144-pin LQFP offering the high GPIO count BCMs demand for lamp, door, mirror, and seat actuation. Its automotive qualification to -40C/+105C ensures survival in under-dash and engine-bay-adjacent environments, while the XGATE co-processor offloads CAN/LIN message handling so the main core is free for timing-critical load control. Firmware for the S12X platform is field-proven, and its Flash density accommodates bootloader, calibration, and diagnostic stacks within a single chip, eliminating external memory and reducing PCB area in space-constrained BCM housings.
おすすめ
Instrument Clusters
Instrument cluster controllers benefit from the S912XET512J2VAGR's blend of 512KB Flash for gauge graphics, telltale logic, and OBD diagnostic firmware, plus the S12X core's deterministic 16-bit execution at 50MHz for stepper-motor pointer and backlight PWM control. The 144-LQFP footprint supplies enough pins to drive multiple gauge motors, LED telltales, buzzer outputs, and CAN/LIN links simultaneously. Automotive qualification from -40C to +105C covers cabin extremes including windshield-adjacent heat soak. The watchdog and oscillator supervision maintain cluster operation under electrical transients such as cranking, supporting ISO-style functional robustness expectations in legacy S12X-based cluster platforms already in production.
おすすめ
Industrial Motor Control
In industrial motor control, the S912XET512J2VAGR provides timer channels for multi-channel PWM generation, a 50MHz core for control-loop execution, and SPI for interfacing gate drivers or ADCs sampling phase currents. The 144-pin package exposes abundant parallel I/O for contactor interlocks, encoder inputs, and fault feedback. Its industrial temperature coverage (-40C/+105C) suits drive cabinets, and the 512KB Flash holds field-oriented control code plus parameter storage and fieldbus stacks. For S12-legacy drive platforms, reusing the HCS12X toolchain shortens development; designers should confirm PWM resolution requirements against the S12X timer block for demanding servo-grade applications.
おすすめ
CAN/LIN Network Gateway Nodes
Gateway nodes bridging CAN and LIN segments are a classic S12X application: the S912XET512J2VAGR's XGATE co-processor is specifically designed to service communication interrupts and buffer message translation independently of the main core, sustaining full bus load at 50MHz. The 512KB Flash accommodates routing tables, diagnostic (UDS-style) stacks, and a bootloader for field updates. The 144-LQFP offers parallel I/O for wake inputs and relay control around the gateway function. Automotive qualification to +105C permits mounting in engine compartments, and the family's long S12X legacy means mature errata sheets and reference gateway firmware are publicly available for rapid reuse.
おすすめ
HVAC and Blower Controllers
Automotive and commercial HVAC controllers use the S912XET512J2VAGR to coordinate blower motor drive, blend/flap actuators, and temperature sensing across its many 144-LQFP I/O. The 50MHz S12X core runs PID loops for cabin temperature regulation with margin, while XGATE handles CAN/LIN commands from the climate head unit. The -40C to +105C automotive grade covers engine-bay blower electronics and sun-exposed plenum environments. The 512KB Flash stores actuator calibration, stall detection, and diagnostic routines; the watchdog supervises software during load-dump transients, supporting the fail-safe blower shutdown behavior HVAC systems require for occupant safety.
おすすめ
Building Automation and Access Control
In building automation, the S912XET512J2VAGR serves as a controller for door access panels, damper actuators, and sensor aggregation nodes. Its industrial temperature rating covers mechanical rooms and rooftop units, and the 50MHz core plus 512KB Flash support protocol stacks, credential databases, and encrypted firmware updates. SPI links to real-time clocks, memory, and security ICs, while the extensive 144-pin I/O directly drives lock relays, LED indicators, and reader interfaces. Because the HCS12X architecture is code-compatible with the widely deployed S12 generation, integrators can port proven access-control firmware with minimal rework, protecting long-lifetime building product investments.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: S912XET512J2VAGR — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | S912XET512J2VAG | S912XET512J3MAGR | S912XET256J2VAGR |
|---|---|---|---|---|
| Package | 144-LQFP (20x20 mm) | 144-LQFP (20x20 mm) - same | 144-LQFP (20x20 mm) - same | 144-LQFP (20x20 mm) - same |
| Brand | NXP Semiconductors (Freescale) | NXP Semiconductors (Freescale) | NXP Semiconductors (Freescale) | NXP Semiconductors (Freescale) |
| Core | 16-bit HCS12X S12X, 50 MHz | 16-bit S12X, 50 MHz | 16-bit S12X, 50 MHz | 16-bit S12X, 50 MHz |
| Flash Memory | 512 KB | 512 KB | 512 KB | 256 KB |
| Temperature Range | -40C to +105C (J2 grade) | -40C to +105C (J2 grade) | higher grade (J3M), hotter ambient capable | -40C to +105C (J2 grade) |
| Automotive Qualification | Yes | Yes | Yes | Yes |
| Packaging Option | Tape & Reel (R suffix) | Tray (no R suffix) | Tape & Reel (R suffix) | Tape & Reel (R suffix) |
| PCB / Firmware Change Required | N/A (reference) | None - drop-in | None - drop-in | None hardware; verify 256KB fits firmware |
主な差別化要因
- Higher temperature grade option available in same footprint （vs S912XET512J1VAGR)
- Maximum Flash density in the S12XET family （vs S912XET256J2VAGR)
- Reel packaging for automated assembly （vs S912XET512J2VAG)
設計ノート
The J2 temperature grade of the S912XET512J2VAGR is specified to +105C ambient. Derate enclosure ambient by the junction-to-ambient rise of the 20x20 mm 144-LQFP on your PCB copper area; for high-power modules (blower drivers, gateway boards in engine bays), consider the S912XET512J3MAGR variant which carries a higher J3M grade, providing thermal margin without PCB redesign. Verify final junction temperature with your board's actual theta-JA from the family datasheet rather than assuming generic LQFP-144 values.
The trailing 'R' in S912XET512J2VAGR denotes tape-and-reel packing, not an electrical variant. When second-sourcing from excess channels (Vyrian, ExcessChip, Rochester Electronics via DigiKey), confirm the full ordering suffix including temperature grade letter (J1/J2/J3M) - ordering the J1 grade (-40/+85C class) by mistake in a +105C application is a common field failure. Verify date codes and require certificate of conformance when buying legacy-channel stock.
The 144-LQFP 20x20 mm footprint uses 0.5 mm pitch gull-wing leads; use the standard LQFP-144 land pattern from IPC-style calculators and route high-current actuator outputs on separate layers from the crystal and analog inputs. Place 100 nF decoupling capacitors at all VDD/VSS pin pairs as close to the package as possible, per the S12X family hardware design guidance, and keep the XGATE-intensive CAN routing short and impedance-controlled on two-layer boards.
コンプライアンス情報
NXP publishes a package/part information PDF for this MPN covering material declarations (metals, nickel finish, lead content per NXP's standard material declaration format); RoHS/REACH status should be confirmed from NXP's material declaration portal for the specific date code. Device is automotive qualified per NXP product page; formal AEC-Q100 level not stated in provided data.
