S9S12HY32J0MLH - 16-bit HCS12 MCU, 32KB Flash, 32MHz | NXP
部品番号: S9S12HY32J0MLH ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $7.85 | $7.85 |
| 10 | $7.1 | $71.00 |
| 100 | $6.2 | $620.00 |
| 500 | $5.45 | $2,725.00 |
| 1,000 | $4.8 | $4,800.00 |
S9S12HY32J0MLH 概要
Key features include 32KB on-chip Flash program memory (32K x 8), 2KB SRAM data memory, a built-in LCD driver supporting segment-style displays commonly found in instrument clusters, a stepper motor driver for gauge movements, an integrated CAN 2.0 controller for in-vehicle networking, and a 16-bit timer/PWM module. The device operates from a 5V supply (with 3.3V I/O variants in the same family) and uses an internal oscillator for clock generation.
From an architectural standpoint, the S9S12HY32J0MLH leverages the proven HCS12 CPU core with CISC instruction set, enhanced interrupt handling, and BDM (Background Debug Mode) for non-intrusive in-circuit debugging. The 32MHz bus clock supports deterministic real-time control loops required for stepper motor driving and signal acquisition. On-chip peripherals are mapped to fixed memory addresses for predictable interrupt latency.
Typical applications include automotive instrument clusters (speedometer, tachometer, fuel gauges), body control modules, HVAC panels, seat control units, and industrial HMI panels with LCD readouts. The integrated stepper motor driver and LCD driver eliminate the need for external driver ICs, reducing BOM cost and PCB area.
When designing with this device, ensure the 5V analog supply is well-decoupled near the AVSS pin, use proper ESD protection on exposed HMI connectors, and follow NXP AN3300 layout recommendations for mixed-signal automotive PCBs.
This page synthesizes distributor pricing, drop-in alternative MPNs, and practical design notes not found in the manufacturer datasheet alone - useful for engineers designing around long-lifecycle automotive parts and procurement teams seeking lifecycle risk mitigation options.
ドロップイン代替品: S9S12HY32J0MLH — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
クイック比較ツール — 並列比較する代替部品を選択:
S9S12HY64J0MLH
✅ ドロップイン📋 参考代替品（カタログ未掲載）
S9S12HY128J0MLH
✅ ドロップイン📋 参考代替品（カタログ未掲載）
S9S12P32J0MLH
✅ ドロップイン📋 参考代替品（カタログ未掲載）
S9S12HY32J0MLH 最大定格＆電気的特性
| Core Architecture | HCS12 (16-bit CISC) |
| Program Memory Type | Flash |
| Program Memory Size | 32 KB (32K x 8) |
| RAM Size | 2 KB |
| Maximum CPU Clock | 32 MHz |
| 電源電圧 | 5 V |
| Number of I/O Pins | 50 |
| パッケージ | 64-LQFP (10x10 mm) |
| Oscillator Type | Internal |
| 動作温度 | -40 °C to +125 °C |
| AEC-Q100 Qualification | Qualified (Automotive Grade) |
| 実装タイプ | Surface Mount |
| Integrated LCD Driver | Yes (segment LCD) |
| Integrated Stepper Motor Driver | Yes |
| CAN Interface | CAN 2.0 |
| Packaging | Tray |
| RoHS ステータス | Compliant |
S9S12HY32J0MLH ピン構成
| ピン 1 | VDDX — I/O supply voltage (5V) |
| ピン 2 | VSSX — I/O ground |
| ピン 3 | PA0 — Port A bit 0 (general I/O or LCD segment) |
| ピン 4 | PA1 — Port A bit 1 (general I/O or LCD segment) |
| ピン 5 | PA2 — Port A bit 2 (general I/O or LCD segment) |
| ピン 6 | PA3 — Port A bit 3 (general I/O or LCD segment) |
| ピン 7 | PA4 — Port A bit 4 (general I/O or LCD segment) |
| ピン 8 | PA5 — Port A bit 5 (general I/O or LCD segment) |
| ピン 9 | PA6 — Port A bit 6 (general I/O or LCD segment) |
| ピン 10 | PA7 — Port A bit 7 (general I/O or LCD segment) |
| ピン 11 | VDDA — Analog supply voltage |
| ピン 12 | VSSA — Analog ground |
| ピン 13 | PB0 — Port B bit 0 (general I/O) |
| ピン 14 | PB1 — Port B bit 1 (general I/O) |
| ピン 15 | PB2 — Port B bit 2 (general I/O) |
| ピン 16 | PB3 — Port B bit 3 (general I/O) |
| ピン 17 | PB4 — Port B bit 4 (general I/O) |
| ピン 18 | PB5 — Port B bit 5 (general I/O) |
| ピン 19 | PB6 — Port B bit 6 (general I/O) |
| ピン 20 | PB7 — Port B bit 7 (general I/O) |
| ピン 21 | PC0 — Port C bit 0 (general I/O or stepper output) |
| ピン 22 | PC1 — Port C bit 1 (general I/O or stepper output) |
| ピン 23 | PC2 — Port C bit 2 (general I/O or stepper output) |
| ピン 24 | PC3 — Port C bit 3 (general I/O or stepper output) |
| ピン 25 | PC4 — Port C bit 4 (general I/O) |
| ピン 26 | PC5 — Port C bit 5 (general I/O) |
| ピン 27 | PC6 — Port C bit 6 (general I/O) |
| ピン 28 | PC7 — Port C bit 7 (general I/O) |
| ピン 29 | PD0 — Port D bit 0 (CAN Rx) |
| ピン 30 | PD1 — Port D bit 1 (CAN Tx) |
| ピン 31 | PD2 — Port D bit 2 (general I/O) |
| ピン 32 | PD3 — Port D bit 3 (general I/O) |
| ピン 33 | PJ0 — Port J bit 0 (general I/O) |
| ピン 34 | PJ1 — Port J bit 1 (general I/O) |
| ピン 35 | PJ6 — Port J bit 6 (general I/O) |
| ピン 36 | PJ7 — Port J bit 7 (general I/O) |
| ピン 37 | BKGD — Background Debug Mode pin |
| ピン 38 | RESET — Reset input (active low) |
| ピン 39 | VDDR — Internal regulator supply |
| ピン 40 | VSSR — Internal regulator ground |
| ピン 41 | PE0 — Port E bit 0 (general I/O or IRQ) |
| ピン 42 | PE1 — Port E bit 1 (general I/O or IRQ) |
| ピン 43 | PP0 — Port P bit 0 (PWM output) |
| ピン 44 | PP1 — Port P bit 1 (PWM output) |
| ピン 45 | PP2 — Port P bit 2 (PWM output) |
| ピン 46 | PP3 — Port P bit 3 (PWM output) |
| ピン 47 | PP4 — Port P bit 4 (PWM output) |
| ピン 48 | PP5 — Port P bit 5 (PWM output) |
| ピン 49 | PP6 — Port P bit 6 (PWM output) |
| ピン 50 | PP7 — Port P bit 7 (PWM output) |
| ピン 51 | PT0 — Port T bit 0 (timer channel) |
| ピン 52 | PT1 — Port T bit 1 (timer channel) |
| ピン 53 | PT2 — Port T bit 2 (timer channel) |
| ピン 54 | PT3 — Port T bit 3 (timer channel) |
| ピン 55 | PAD0 — Analog input / digital I/O |
| ピン 56 | PAD1 — Analog input / digital I/O |
| ピン 57 | PAD2 — Analog input / digital I/O |
| ピン 58 | PAD3 — Analog input / digital I/O |
| ピン 59 | PAD4 — Analog input / digital I/O |
| ピン 60 | PAD5 — Analog input / digital I/O |
| ピン 61 | PAD6 — Analog input / digital I/O |
| ピン 62 | PAD7 — Analog input / digital I/O |
| ピン 63 | XCLKS — Clock select (internal/external) |
| ピン 64 | EXTAL — External crystal/oscillator |
主な用途
S9S12HY32J0MLH の用途: 8 件s: Automotive Instrument Cluster, Body Control Module (BCM), HVAC Control Panel, Industrial HMI with LCD Readout, Stepper Motor Control Sub-System, Automotive Seat Control Unit, Two-Wheeler Dashboard, White-Goods Appliance Control.
Automotive Instrument Cluster
The S9S12HY32J0MLH is purpose-built for automotive analog/digital instrument clusters. Its integrated segment LCD driver directly connects to the cluster's TFT or segment display backplane without external driver ICs, while the integrated stepper motor driver drives air-core and stepper gauges (speedometer, tachometer, fuel, temperature) with up to 4 stepper channels. The 32MHz HCS12 core executes gauge-smoothing algorithms, CAN message decoding for vehicle speed/RPM, and diagnostic routines. The AEC-Q100 qualification and -40°C to +125°C rating are essential for cabin-mounted clusters subject to solar loading and cold-start conditions.
おすすめ
Body Control Module (BCM)
The S9S12HY32J0MLH fits compact body control modules for lighting, door locks, mirror control, and wipers. The CAN 2.0 controller handles in-vehicle networking at 125-500 kbps typical, while the 50 I/O pins drive relay drivers and read switch inputs directly. The HCS12 CISC core efficiently handles bit-banging protocols (LIN master via SCI plus timer PWM) and BCM diagnostics per UDS over CAN. Operating from 5V supply simplifies interface to 12V automotive rails via standard LDO.
おすすめ
HVAC Control Panel
The S9S12HY32J0MLH supports HVAC control panels with LCD temperature readouts and knob/button HMI. The integrated LCD driver shows temperature settings and fan speed, while I/O pins read rotary encoder signals for setpoint adjustment. The HCS12 core runs PID control for blower speed and mode-door positioning, with CAN messages coordinating with the engine ECU. AEC-Q100 qualification ensures reliable operation across cabin temperature extremes.
おすすめ
Industrial HMI with LCD Readout
Outside automotive, the S9S12HY32J0MLH fits industrial HMI panels requiring segment LCD readouts and rugged temperature operation. The integrated LCD driver displays process variables (pressure, flow, temperature) without external drivers, the CAN interface links to industrial fieldbus via gateway, and the -40°C to +125°C rating handles outdoor and factory-floor environments. The HCS12 core runs deterministic control loops with predictable interrupt latency for safety-rated HMI functions.
おすすめ
Stepper Motor Control Sub-System
The S9S12HY32J0MLH integrates dedicated stepper motor drive hardware that simplifies air-core gauge and small stepper load control. The MCU generates phase-sequenced PWM outputs that drive external H-bridges or directly switch low-current stepper coils up to ~100mA per phase. The HCS12 core handles microstepping tables and acceleration/deceleration profiles in firmware. Compared to discrete stepper-driver + MCU approach, the integrated driver reduces PCB footprint by ~30% and BOM cost.
おすすめ
Automotive Seat Control Unit
The S9S12HY32J0MLH is well-suited to seat control ECUs that drive seat-position stepper motors and memorize driver preferences. The integrated stepper driver hardware provides direct coil-driving capability for seat-adjustment motors, while the 32KB Flash stores multiple driver profiles. CAN interface coordinates with the body controller for key-fob commands and crash-event locking. AEC-Q100 grade ensures safe operation in cabin-mounted under-seat positions.
おすすめ
Two-Wheeler Dashboard
The S9S12HY32J0MLH fits two-wheeler (motorcycle, scooter, e-bike) digital dashboards where small LCD readouts and stepper-driven gauges need to coexist with CAN or LIN networking. The integrated LCD driver displays speed/RPM/fuel without external drivers, the stepper driver controls analog-style gauge needles for styling, and the HCS12 core runs odometer and trip-meter logic. The wide -40°C to +125°C range supports motorcycle environments exposed to direct sun and cold storage.
おすすめ
White-Goods Appliance Control
The S9S12HY32J0MLH can serve as the main controller in high-end white-goods (washing machine, dishwasher, oven) front panels with LCD displays and rotary knob position sensing. The integrated LCD driver displays cycle status, while the stepper driver or PWM handles motor-controlled valves and damper. The CAN/LIN support enables networked appliance ecosystems, and the wide temperature rating is suitable for kitchen and laundry environments.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: S9S12HY32J0MLH — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | S9S12HY64J0MLH | S9S12HY128J0MLH | S9S12P32J0MLH |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 64-LQFP (10x10 mm) | 64-LQFP (10x10 mm) - same | 64-LQFP (10x10 mm) - same | 64-LQFP (10x10 mm) - same |
| Program Memory (Flash) | 32 KB | 64 KB | 128 KB | 32 KB |
| RAM Size | 2 KB | 4 KB | 6 KB | 2 KB |
| CPU Clock | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Integrated LCD Driver | Yes | Yes | Yes | No |
| Integrated Stepper Driver | Yes | Yes | Yes | No |
| AEC-Q100 Qualified | Yes | Yes | Yes | Yes |
| Operating Temperature | -40°C to +125°C | -40°C to +125°C | -40°C to +125°C | -40°C to +125°C |
主な差別化要因
- Integrated segment LCD and stepper motor drivers （vs S9S12P32J0MLH (same family, 64-LQFP, 32KB Flash))
- 32KB Flash option for cost-optimized clusters （vs S9S12HY64J0MLH (same family, 64-LQFP, 64KB Flash))
- AEC-Q100 qualification at full automotive temperature （vs Industrial-grade HCS12 non-AEC parts)
- 32MHz HCS12 CPU with 50 I/O pins （vs S9S12GN32F0CLF (48-LQFP, 32KB Flash, 32MHz))
設計ノート
Place a 100nF decoupling capacitor as close as possible to each VDDX/VSSR/VDDA pin pair, plus a bulk 10uF tantalum or ceramic at the regulator output. Use star-ground topology with VSSA and VSSR tied at a single point under the IC to minimize ADC reference noise. The internal 5V regulator (VDDR) requires its own 100nF+1uF capacitor pair; do not omit this or the MCU will fail to start reliably in cold conditions.
Route the CANH/CANL differential pair with 120-ohm characteristic impedance, 100-ohm differential, and keep total length under 1m on the cluster PCB. Add a TVS diode (PESD5V0L4UG or similar) close to the bus connector for ESD/EMI protection. The BKGD pin (pin 37) should have a 4.7k pull-up to VDDX for reliable BDM operation; do not leave it floating in production.
Estimated: at 32MHz CPU clock and typical automotive instrument-cluster duty cycle (~30% CPU utilization), die power dissipation is approximately 200mW. The 64-LQFP package has theta_JA around 50°C/W on a 2-layer PCB with no thermal via array, yielding a junction-to-ambient rise of ~10°C above 25°C ambient. For under-dash or high-ambient installations above 85°C, add a copper pour beneath the exposed pad area (where applicable) or use the 112-LQFP variant with exposed pad.
Do not connect BKGD directly to a 5V signal in production - it is a special-function debug pin that requires the BDM pod to drive it. Tie unused I/O pins to defined logic levels (not floating) to minimize supply current in STOP mode. Segment LCD pins left unconnected can cause ghost segments; if LCD is unused, configure unused LCD pins as analog inputs or disable the LCD peripheral to save power.
Stepper motor outputs (PC0-PC3 in stepper mode) must be routed away from analog inputs (PAD0-PAD7) by at least 5mm of trace or a ground plane barrier to prevent PWM switching noise coupling into ADC readings. Keep stepper traces short and use 10-22 ohm series resistors near the MCU to dampen reflected ringing when driving long cables to gauge motors.
コンプライアンス情報
AEC-Q100 qualified per NXP product page. RoHS and REACH compliant per NXP environmental documents. Halogen-free per JEDEC JS709B definitions. Conflict minerals compliant per Section 1502 of the Dodd-Frank Act.