Texas Instruments

SN74LS07NS - 6-Channel Open-Collector Buffer | Texas Instruments

部品番号: SN74LS07NS ✓ 生産中
4.75 V to 5.25 V Vdss 40 mA Id 14-SO (SOIC-14) Package
MOQ: 1 |

SN74LS07NS 概要

Texas Instruments SN74LS07NS is a six-channel, non-inverting bipolar buffer and driver with open-collector high-voltage outputs, operating from 4.75 V to 5.25 V in a 14-pin SOIC package. The device provides six independent channels, a 40 mA low-level output current, and a TTL-compatible logic interface for driving compatible loads and pull-up networks.

A logic buffer or driver is a digital IC that conditions and strengthens a signal so it can reliably drive another logic circuit. The SN74LS07 belongs to the 74-series bipolar logic hierarchy, where a buffer or driver sits between digital logic ICs and external loads. Its open-collector outputs require an external pull-up resistor, allowing the output stage to disconnect electrically when the output is low.

Key features include six non-inverting channels, open-collector output design, a 4.75 V to 5.25 V supply range, 40 mA sink-current capability, 14 mA quiescent current, and approximately 45 mA operating supply current. The open-collector architecture is useful when multiple compatible outputs must share a wired bus or when an interface requires an externally selected pull-up voltage. The SN74LS07NS commercial temperature range is 0°C to 70°C.

The bipolar SN74LS07 architecture is intended for conventional 5 V TTL systems rather than low-voltage CMOS designs. Because each output has an open-collector transistor rather than a totem-pole output stage, the board designer selects the pull-up resistor and determines the usable rise time from the bus capacitance. Input and output logic levels follow the SN74LS07 family specifications, while the low-level output current is specified at 40 mA.

Typical uses include driving indicator lamps, relay interfaces, optocoupler inputs, level-shifting networks, and general-purpose open-collector digital buses. The SN74LS07NS is particularly appropriate when the driven device must share a pull-up rail or when a wired-AND/open-collector connection is required. It can also buffer TTL signals for short interconnect distances within a 5 V system.

Choose the pull-up resistor and trace length together because the external resistor and total bus capacitance determine the output rise time. Keep the pull-up connection short, use a resistor value suitable for the required sink current, and account for the 40 mA output rating when calculating the worst-case low-state load. The open-collector output can remain off during reset or power-loss conditions, which may be beneficial in fail-safe interface arrangements.

This product page combines the SN74LS07NS electrical characteristics, package details, pin-compatible alternatives, pricing evidence, and practical design guidance into an engineering-focused reference for selecting and implementing this six-channel open-collector buffer.

ドロップイン代替品: SN74LS07NS — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: SN74LS07NS (同一形状・フットプリント) — 相違点: Logic Family, Number of Channels, Package.

Texas Instruments
Logic Family: LS TTL (74LS)
Number of Channels: 6
Package: SOIC (D), 14 pins
比較対象 SN74LS07NS →

SN74LS07DR

✅ ドロップイン
Texas Instruments
📦 SOIC-14
Hex non-inverting buffer/driver · 6 · Open-collector · 4.75 V to 5.25 V · 30 V · 40 mA · Yes · Non-inverting

価格はお問い合わせください

データシートを見る →

SN74ALS07ADR

✅ ドロップイン ⚠️ 仕様未検証
📦 SOIC-14
Pin-compatible ALS-family open-collector buffer with a 4.5 V to 5.5 V nominal supply range versus 4.75 V to 5.25 V, a 0.25 V wider upper limit and 0.25 V wider lower limit.

📋 参考代替品(カタログ未掲載)

SN74HC07DR

✅ ドロップイン ⚠️ 仕様未検証
📦 SOIC-14
Pin-compatible CMOS open-collector buffer operating from 2 V to 6 V versus the SN74LS07NS 4.75 V to 5.25 V range; lower-voltage operation adds 2.75 V to the minimum supply capability.

📋 参考代替品(カタログ未掲載)

SN74HCT07DR

✅ ドロップイン ⚠️ 仕様未検証
📦 SOIC-14
Pin-compatible HCT-family open-collector buffer with TTL-compatible inputs and a 4.5 V to 5.5 V operating range versus the SN74LS07NS 4.75 V to 5.25 V range.

📋 参考代替品(カタログ未掲載)

SN74LVC07ADR

✅ ドロップイン ⚠️ 仕様未検証
📦 SOIC-14
Pin-compatible low-voltage CMOS open-collector buffer operating from 1.65 V to 5.5 V versus the SN74LS07NS 4.75 V to 5.25 V range; lower minimum voltage differs by 3.10 V.

📋 参考代替品(カタログ未掲載)

SN74LS07NS 最大定格&電気的特性

Logic Type TTL
Number of Channels 6 channels
Elements per Channel 1 element
出力タイプ Open-collector
Polarity Non-inverting
Supply Voltage Range 4.75 V to 5.25 V
Low-Level Output Current 40 mA
静止電流 14 mA
Operating Supply Current 45 mA
Minimum Operating Temperature 0°C
Maximum Operating Temperature 70°C
パッケージ 14-SO (SOIC-14)
実装タイプ Surface mount
Logic Family SN74LS

SN74LS07NS 14-so (soic-14) ピン配置ガイド

SN74LS07NS (14-so (soic-14) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。

SN74LS07NS の 14-so (soic-14) パッケージピン配置図

詳細なピン配置データはありません: SN74LS07NS.

詳細は データシート をご参照ください。

主な用途

SN74LS07NS の用途: 6 件s: Open-Collector Indicator Driving, Relay and Solenoid Interface, Open-Collector Level Shifting, Optocoupler Input Buffering, Wired Open-Collector Data Bus, Legacy TTL Signal Conditioning.

💡

Open-Collector Indicator Driving

The SN74LS07NS fits indicator-driving circuits that require one shared pull-up rail and independent low-side sinking paths. Each of its six channels provides non-inverting control and a 40 mA low-level output-current rating. Connect the selected channel output to the indicator cathode, connect the indicator anode to the chosen pull-up rail, and place a suitable resistor in the pull-up path. This arrangement allows the device to serve indicators using a voltage other than the IC's 5 V logic rail. Check the pull-up current against the 40 mA limit and account for the SN74LS07NS 0°C to 70°C commercial operating range.

⚡

Relay and Solenoid Interface

The SN74LS07NS can provide the low-side sinking element in a relay-driver stage because each open-collector output is rated for 40 mA of low-level current. The logic output energizes a suitable transistor or relay coil, while a flyback diode or other suppression component handles inductive current when the driver switches off. The SN74LS07NS should not drive a coil directly unless the coil current, voltage, temperature rise, and waveform remain within every applicable device limit. Since the buffer is non-inverting, the system must account for the active-low behavior created by the open-collector sinking stage.

🌐

Open-Collector Level Shifting

The SN74LS07NS supports unidirectional level shifting when the source and destination share a suitable pull-up rail. Its six non-inverting channels accept 5 V TTL logic, and each open-collector output connects to a pull-up that establishes the receiving-side high voltage. This arrangement is particularly useful for isolated or externally biased signal domains, provided the pull-up voltage remains within the output-device limits. The SN74LS07NS 4.75 V to 5.25 V supply range and 40 mA sink rating must be considered when choosing the pull-up. Because the output is not actively driven high, rise time also depends on the pull-up resistance and total load capacitance.

🧩

Optocoupler Input Buffering

The SN74LS07NS can sink the current from an optocoupler or phototransistor input while the pull-up resistor establishes the digital high level. This arrangement turns the phototransistor's changing resistance into a clean logic signal at a 5 V TTL receiver. Select the pull-up so the low-state current remains below the 40 mA channel rating and so the resistor provides adequate noise margin and rise-time performance. The buffer adds electrical drive and isolation from the phototransistor network, but it does not improve the optical signal itself. Validate the operating-temperature range because this SN74LS07NS orderable is specified for 0°C to 70°C.

🖥️

Wired Open-Collector Data Bus

The SN74LS07NS can participate in a wired open-collector bus because its output channels release the shared line instead of actively driving it high. Any channel that pulls the line low determines the low state, while the common pull-up creates the high state when all channels are off. This behavior supports simple arbitration and fault-tolerant interfaces in conventional 5 V TTL equipment. The design must include a pull-up resistor sized for the total bus capacitance and low-state sink current, and it must account for the resulting rise time. The 40 mA low-level output current defines the channel's principal loading constraint.

🔧

Legacy TTL Signal Conditioning

The SN74LS07NS provides six non-inverting channels for strengthening conventional TTL signals and isolating a logic source from a driven net. The six-channel organization allows one package to serve several control or status signals, while the open-collector outputs add flexibility for pull-up-based interfaces. A 4.75 V to 5.25 V supply is required, and the device's 45 mA operating supply current should be included in the power-budget calculation. For legacy equipment, the 0°C to 70°C operating range and 40 mA low-level output rating are the principal selection boundaries. Confirm output timing and logic thresholds during system qualification.

おすすめ製品の概要

SN74LS07DR Texas Instruments 使用用途: Open-Collector Indicator Driving, Relay and Solenoid Interface, Optocoupler Input Buffering, Legacy TTL Signal Conditioning SN74LVC07ADR Low-voltage open-collector buffer alternative 使用用途: Open-Collector Indicator Driving, Optocoupler Input Buffering SN74ALS07ADR ALS-family open-collector driver alternative 使用用途: Relay and Solenoid Interface, Wired Open-Collector Data Bus SN74HC07DR CMOS open-collector interface alternative 使用用途: Open-Collector Level Shifting, Wired Open-Collector Data Bus SN74HCT07DR TTL-input open-collector interface alternative 使用用途: Open-Collector Level Shifting, Legacy TTL Signal Conditioning
What is the SN74LS07NS?
The SN74LS07NS is a six-channel, non-inverting bipolar logic buffer and driver with open-collector outputs in a 14-pin SOIC package. According to the Texas Instruments product page, it operates from 4.75 V to 5.25 V. Each output can sink up to 40 mA, while the specified quiescent current is 14 mA and the operating supply current is 45 mA.
What is the supply voltage of SN74LS07NS?
The SN74LS07NS operates from 4.75 V to 5.25 V. According to the Texas Instruments SN74LS07 product page, this device is a 5 V bipolar buffer and driver rather than a general-purpose low-voltage CMOS part. The supply range should be checked against every connected load and pull-up rail because an external pull-up above the permitted logic voltage can increase output voltage beyond safe device limits.
What is the operating temperature range of SN74LS07NS?
The SN74LS07NS is specified for a 0°C to 70°C operating range. The SN74LS07NS and SN74LS07DR comparison identifies the commercial-temperature limits as 0°C minimum and 70°C maximum. A design operating outside that range should use an industrial-temperature equivalent with a verified pin-compatible designation rather than assuming that the same suffix can be used across all temperature grades.
Why does the SN74LS07NS need a pull-up resistor?
Every SN74LS07NS output requires an external pull-up resistor because its output stage is open collector. The output transistor actively pulls the line toward ground but does not source current in the high state. According to the Texas Instruments SN74LS07 documentation, the pull-up establishes the high logic voltage and its resistance, together with bus capacitance, determines the rise time. The resistor must also permit the required low-level sink current without exceeding the 40 mA output rating.
How many output channels does the SN74LS07NS have?
The SN74LS07NS contains six independent, non-inverting buffer channels. According to the Texas Instruments product description, it is a six-channel bipolar buffer and driver with open-collector high-voltage outputs. Each channel provides the same 40 mA low-level output-current rating, and each requires its own external pull-up when the output is used as an open-collector interface.
What is the low-level output current of SN74LS07NS?
The specified low-level output current of the SN74LS07NS is 40 mA. This rating describes how much current each open-collector output can sink while remaining within its specified low-level output-voltage limits. According to the Texas Instruments SN74LS07 documentation, pull-up resistor selection must account for both the 40 mA sink-current limit and the required logic transition speed.
Where can I download the SN74LS07NS datasheet PDF?
The official SN74LS07NS documentation is available through the Texas Instruments SN74LS07 product page at https://www.ti.com/product/SN74LS07. The manufacturer page links the device data sheet, ordering information, parameters, and quality documentation. For PCB work, use the pin-description table in the manufacturer data sheet to assign every one of the 14 SOIC pins and confirm the orientation of the open-collector outputs.
Where can I find the SN74LS07NS pinout?
The SN74LS07NS pinout is published in the Texas Instruments SN74LS07 data sheet linked from the official product page. The exact SMD package is identified as 14-SO, corresponding to a 14-pin SOIC footprint. Use the package drawing and pin-description table together when assigning the six input pins, six output pins, power connection, and ground connection rather than inferring pin numbers from another package variant.
What is the difference between SN74LS07NS and SN74LS07DR?
The SN74LS07NS and SN74LS07DR both identify the SN74LS07 six-channel open-collector buffer in a 14-pin SOIC package, but they use different orderable packaging suffixes. The verified device comparison identifies SN74LS07NS as SOIC-14 with 40 mA low-level output current, 14 mA quiescent current, and a 4.75 V to 5.25 V supply range. Confirm the reel dimensions, quantity, and markings on the received reel before treating the order codes as production-equivalent.
Can SN74LVC07A replace SN74LS07NS?
The SN74LVC07A can serve as a voltage-compatible drop-in candidate in suitable 5 V interfaces, but its electrical operating conditions differ from the bipolar SN74LS07NS. The SN74LS07NS operates from 4.75 V to 5.25 V, whereas the LVC family is designed around low-voltage CMOS operation. Verify the exact pinout, output-current rating, input thresholds, pull-up voltage, and timing at the system voltage before approving the substitution.
When should I choose SN74LS07NS instead of SN74LVC07A?
Choose the SN74LS07NS when a legacy 5 V TTL design specifically requires the established SN74LS07 bipolar characteristics or its 40 mA low-level output behavior. Choose an LVC-family alternative only when the entire interface operates within the LVC voltage range and its input thresholds and output ratings satisfy the design. The SN74LS07NS commercial temperature limit of 0°C to 70°C must also remain acceptable for the intended installation.
Is SN74LS07NS suitable for driving a relay?
The SN74LS07NS can sink current through an open-collector relay-driver stage, but it cannot drive a relay coil directly. Each relay coil needs a suitable flyback diode or other suppression network, and the selected coil current must remain within the device's 40 mA low-level output rating with appropriate voltage and temperature margin. The Texas Instruments SN74LS07 documentation identifies open-collector outputs as suitable for compatible driver and indicator interfaces.
What is the best drop-in replacement for SN74LS07NS?
The closest same-footprint replacement is a pin-compatible open-collector buffer in the 14-pin SOIC package, such as SN74LS07DR, subject to package-code and marking review. Other SN74-family alternatives may change supply voltage, speed, output-current rating, or logic thresholds. Request a quote through the Request a Quote form on this page for exact SN74LS07NS sourcing, and validate any alternative against the original schematic and timing requirements.
What are the key specifications of SN74LS07NS that engineers should know?
The key SN74LS07NS specifications are six non-inverting channels, open-collector outputs, a 4.75 V to 5.25 V supply range, 40 mA low-level output current, 14 mA quiescent current, 45 mA operating supply current, and a 0°C to 70°C operating range. According to the Texas Instruments product page and device comparison, the component uses a 14-pin SOIC package. External pull-up resistors are mandatory for normal high-state operation.
Where can I buy SN74LS07NS and check its lead time?
Use the Request a Quote form on this page to request the current SN74LS07NS unit availability, lead time, and order quantity. The manufacturer lists the device as a six-channel 5 V bipolar open-collector buffer, but live stock and delivery timing can change. Provide the required reel quantity, target date, and any required compliance documentation so the sourcing request can be evaluated accurately.
How does open-collector output improve wired-bus flexibility?
Open-collector outputs allow several compatible SN74LS07NS channels to share a common pull-up without the outputs actively driving the line high at the same time. When any channel pulls the bus low, the shared line becomes low; when every channel releases the line, the pull-up raises it. This wired logic can simplify fault-tolerant indicator and driver arrangements, but it also makes pull-up value, bus capacitance, rise time, and contention conditions critical design parameters.

エンジニアリング参考データ: SN74LS07NS — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the SN74LS07NS when maintaining a conventional 5 V bipolar TTL design and the established SN74LS07 open-collector behavior are primary requirements. Its six non-inverting channels, 40 mA low-level output rating, and 4.75 V to 5.25 V supply range fit legacy indicator, relay-interface, optocoupler-input, and wired-bus circuits, provided the 0°C to 70°C range is acceptable. Select SN74LS07DR when a second orderable representation of the same SN74LS07 function is needed. Consider SN74ALS07ADR when the system permits advanced-bipolar TTL electrical characteristics and a 4.5 V to 5.5 V supply range. Use SN74HC07DR or SN74LVC07ADR only after confirming that their CMOS voltage ranges, input thresholds, timing, output-current capability, and pull-up requirements satisfy the interface. SN74HCT07DR is useful for 5 V CMOS systems needing TTL-compatible inputs. Regardless of the selected family, verify the manufacturer pinout, output ratings, logic thresholds, and external pull-up network before substitution.

代替品との比較

パラメータ この製品 SN74LS07DR SN74ALS07ADR SN74HC07DR SN74HCT07DR SN74LVC07ADR
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package SOIC-14 SOIC-14 - same SOIC-14 - same SOIC-14 - same SOIC-14 - same SOIC-14 - same
Number of Channels 6 6 6 6 6 6
Output Type Open-collector Open-collector Open-collector Open-collector Open-collector Open-collector
Polarity Non-inverting Non-inverting Non-inverting Non-inverting Non-inverting Non-inverting
Supply Voltage Range 4.75 V to 5.25 V 4.75 V to 5.25 V 4.5 V to 5.5 V 2 V to 6 V 4.5 V to 5.5 V 1.65 V to 5.5 V
Logic Family SN74LS bipolar TTL SN74LS bipolar TTL SN74ALS advanced bipolar TTL SN74HC CMOS SN74HCT CMOS with TTL-compatible inputs SN74LVC low-voltage CMOS

主な差別化要因

  • Direct same-function SOIC alternative (vs SN74LS07DR)
  • Broad supply-voltage operating range (vs SN74HC07DR)
  • Lower-voltage compatibility (vs SN74LVC07ADR)
  • TTL-compatible input thresholds (vs SN74HCT07DR)

設計ノート

Select an external pull-up resistor for every open-collector output. Its value must satisfy the required low-level sink current, remain within the SN74LS07NS 40 mA output rating, and provide an acceptable rising edge when combined with total bus capacitance. A lower pull-up resistance improves rise time but increases current and power dissipation; a higher value reduces loading but can make the interface too slow. Validate both worst-case bus loading and the longest connected trace.

Place each pull-up resistor close to the corresponding SN74LS07NS output or the controlled bus node when several outputs share a bus. Keep the connection short to limit parasitic capacitance and susceptibility to noise. Route open-collector lines away from sensitive clock and analog nodes, provide a continuous ground reference, and place the device's decoupling capacitor close to its supply pin according to the manufacturer pinout and recommended layout guidance.

Do not treat the open-collector high state as an actively driven logic-high output. If the pull-up is omitted, the output remains floating; if the pull-up rail exceeds the device's permitted voltage range, the output can be damaged. Also avoid confusing the SN74LS07NS SOIC ordering suffix with the SN74LS07N 14-PDIP version. Confirm the PCB footprint, package drawing, pin numbering, temperature grade, and pull-up voltage before releasing production artwork.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The Texas Instruments product page provides device, ordering, and quality information, but the verified records do not explicitly state the requested compliance status values. Compliance documents should be reviewed before procurement.

データ検証日: 2026-11-14 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

sn74ls07n datasheet SN74LS07NS datasheet SN74LS07NS pinout SN74LS07NS specifications SN74LS07NS equivalent SN74LS07NS replacement SN74LS07NS drop-in replacement SN74LS07NS vs SN74LVC07A SN74LS07NS application circuit Texas Instruments SN74LS07NS SN74LS07NS price SN74LS07NS stock SN74LS07NS SOIC-14 footprint SN74LS07NS open collector pull-up

関連部品&用語

Texas Instruments SN74LS07NS SN74LS07 SN74LS07DR SN74ALS07ADR SN74HC07DR SN74HCT07DR SN74LVC07ADR Hex buffer and driver Open-collector output Non-inverting logic buffer Bipolar TTL Low-voltage CMOS Logic IC Digital buffer Level shifter Wired open-collector bus Pull-up resistor Low-level output current SOIC-14 Surface mount TTL-compatible interface Relay interface Optocoupler input
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示