onsemi

SN74LS540H - 8-Channel 5V 3-State Buffer | onsemi

部品番号: SN74LS540H ✓ 生産中
4.75 V to 5.25 V Vdss DIP-20 Package
MOQ: 1 |

SN74LS540H 概要

The onsemi SN74LS540H is an eight-channel bipolar inverting buffer and line driver with 3-state outputs, a 4.75 V to 5.25 V supply range, and a 20-pin DIP package. Each of its eight channels provides an independent active-low output-enable function for placing the outputs in a high-impedance state. This combination allows multiple data sources to share a bus without creating contention when the disabled drivers are inactive.

A logic buffer is a digital IC that strengthens a signal for reliable propagation through a circuit or board. The SN74LS540 belongs to the bipolar TTL family and occupies the hierarchy digital IC > logic IC > buffer/line driver. Its inverting channels complement the 74LS541 non-inverting function, while its three-state outputs add bus isolation that a conventional two-state buffer cannot provide.

The device contains eight inverters and one common active-low output enable. According to the Texas Instruments SN74LS540 datasheet SDLS180, the circuit has input and output pins placed on opposite sides of the package, simplifying routing and reducing signal-bus congestion. Its 4.75 V to 5.25 V operating range is characteristic of 5 V bipolar TTL systems, where it is intended to operate from a regulated 5 V supply.

The three-state output stage is the key technical feature. When the output-enable input is low, all eight outputs are actively driven in their inverted logic state. When it is high, the outputs enter the high-impedance state and cease driving the connected bus. The 74LS540 has no individual enable input for each channel; all eight outputs are controlled together, making it appropriate for coordinated eight-bit bus isolation.

Typical uses include bus-interface buffering, digital test equipment, computer peripheral interfacing, and data-routing systems that require inverted data and shared-bus control. The 20-pin DIP package is also useful for prototypes, legacy industrial equipment, and repair assemblies designed around through-hole logic boards. Designers should still verify the exact mechanical dimensions and pin numbering of the onsemi orderable variant before fabrication.

When laying out the circuit, place the shared output-enable trace away from high-speed data paths and use a defined logic level whenever the enable pin is not actively controlled. Maintain a stable 5 V rail with sufficient decoupling, and treat the high-impedance outputs as undriven buses rather than outputs that actively produce a logic zero or one. This distinction is essential when receivers remain connected while the SN74LS540H is disabled.

This product record combines the device function, electrical limits, pin assignment, source documentation, practical application guidance, and same-footprint replacement analysis. It is intended to help engineers distinguish a genuine pin-compatible replacement from a functional substitute that changes the package, enable polarity, logic family, or output behavior.

ドロップイン代替品: SN74LS540H — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: SN74LS540H (同一形状・フットプリント) — 相違点: Package.

Texas Instruments
Package: 20-pin PDIP
比較対象 SN74LS540H →

SN74LS540N

✅ ドロップイン
Texas Instruments
📦 DIP-20
Octal inverting buffer and line driver · 8 channels · 3-state, inverting · 4.75 V to 5.25 V · Bipolar · 20-pin PDIP · Through-hole · Active-low

価格はお問い合わせください

データシートを見る →

SN74LS540J

✅ ドロップイン ⚠️ 仕様未検証
📦 DIP-20
Same SN74LS540 5 V octal inverting 3-state function and 20-pin DIP arrangement; package construction and qualification markings require final verification.

📋 参考代替品(カタログ未掲載)

SN74LS540N

✅ ドロップイン
Texas Instruments
📦 DIP-20
Octal inverting buffer and line driver · 8 channels · 3-state, inverting · 4.75 V to 5.25 V · Bipolar · 20-pin PDIP · Through-hole · Active-low

価格はお問い合わせください

データシートを見る →

74LS540

✅ ドロップイン
📦 DIP-20
Same 74LS540 octal inverting buffer/line-driver function and 20-pin arrangement; device markings and manufacturer-specific qualification require review.

📋 参考代替品(カタログ未掲載)

DM74LS540

✅ ドロップイン
📦 DIP-20
Same 74LS540-family 8-channel inverting 3-state function and DIP-20 footprint; exact suffix, temperature grade, and pin construction must be confirmed.

📋 参考代替品(カタログ未掲載)

SN74LS540H 最大定格&電気的特性

Product Type Octal inverting buffer/line driver with 3-state outputs
Number of Channels 8 channels
Bits per Channel 1 bit per channel
出力構成 3-state, inverting
Operating Supply Voltage Range 4.75 V to 5.25 V
Logic Technology Bipolar TTL
Output Enable Polarity Active-low, common control for all channels
Number of Output Enable Inputs 1 common output-enable input
パッケージ DIP-20
ピン数 20 pins
実装タイプ Through-hole
Input and Output Pin Arrangement Inputs and outputs on opposite sides of the package

SN74LS540H ピン構成

DIP-20 Package Pinout Diagram DIP-20 20-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 20 2 19 3 18 4 17 5 16 6 15 7 14 8 13 9 12 10 11 DIP-20
ピン 1 1A — Data input for channel 1
ピン 2 2A — Data input for channel 2
ピン 3 3A — Data input for channel 3
ピン 4 4A — Data input for channel 4
ピン 5 5A — Data input for channel 5
ピン 6 6A — Data input for channel 6
ピン 7 7A — Data input for channel 7
ピン 8 8A — Data input for channel 8
ピン 9 GND — Ground reference
ピン 10 1OE — Common active-low output enable
ピン 11 8Y — Inverting output for channel 8
ピン 12 7Y — Inverting output for channel 7
ピン 13 6Y — Inverting output for channel 6
ピン 14 5Y — Inverting output for channel 5
ピン 15 4Y — Inverting output for channel 4
ピン 16 3Y — Inverting output for channel 3
ピン 17 2Y — Inverting output for channel 2
ピン 18 1Y — Inverting output for channel 1
ピン 19 VCC — Positive power supply
ピン 20 NC — Not connected

主な用途

SN74LS540H の用途: 6 件s: Shared Digital Data Bus, Legacy Industrial Control Interface, Computer Peripheral Data Interface, Digital Test and Measurement Equipment, Instrumentation Signal Routing, Prototyping and Legacy Logic Repair.

🖥️

Shared Digital Data Bus

The SN74LS540H fits shared eight-bit bus buffering because all eight outputs can be disabled together through the common active-low output-enable input. In the enabled state, the device actively drives inverted data across the 4.75 V to 5.25 V supply range; in the disabled state, its outputs become high-impedance and release the bus. This arrangement helps prevent two buffers from driving the same net simultaneously when system timing coordinates the enable interval. Because the logic is inverting and the enable control is shared, downstream circuitry must account for both inversion and common switching. The 20-pin DIP package is particularly practical for legacy boards, test fixtures, and industrial control systems that use through-hole logic.

🏭

Legacy Industrial Control Interface

SN74LS540H is useful as an interface-conditioning element between older bipolar TTL control logic and a modern peripheral or data-acquisition module. Its eight inverting channels provide signal buffering, while the shared 3-state control can isolate the interface from a shared wiring harness during another subsystem's transfer cycle. Operating from 4.75 V to 5.25 V matches regulated 5 V industrial logic systems and supports point-to-point or shared-bus routing. Designers should use a single defined output-enable level when no controller is connected, preserve adequate supply decoupling, and verify timing margins because the device introduces the propagation delay specified by the SN74LS540 family datasheet.

🖥️

Computer Peripheral Data Interface

The SN74LS540H can condition eight parallel data lines between a computer peripheral and an external bus. Its common three-state control lets the interface release all eight lines when the peripheral is not selected, reducing bus contention during transfers to another device. The 74LS540 architecture places inputs and outputs on opposite sides of the package, which can simplify through-hole board routing compared with interleaved input and output pins. Because the channels invert the incoming data, the receiving endpoint must use the expected inverted logic level or include an additional inversion stage. A suitable system design must also confirm voltage compatibility, timing, and the electrical-current requirements of the connected receiver.

🔧

Digital Test and Measurement Equipment

SN74LS540H is appropriate for legacy digital test equipment that needs an eight-line inverting buffer with a shared disable control. The active-low enable can be driven by a fixture controller so that the device drives its test lines during one phase and releases them during another. That controlled high-impedance interval is useful when the same fixture lines connect to multiple DUTs or measurement circuits. Its 20-pin DIP construction supports through-hole prototyping and repair of older instrumentation. Engineers should account for data inversion, account for the common enable rather than assuming eight independent controls, and check fanout and settling requirements against the source and load devices connected to the fixture.

📡

Instrumentation Signal Routing

The SN74LS540H can serve as a digital control-line buffer in instrumentation that routes commands to multiple subsystems. Eight related logic signals are inverted in a controlled manner and then either drive their loads or enter the high-impedance state, depending on the common output-enable level. This can prevent inactive interface logic from loading a shared control bus. The function is most suitable for digital control and status signals rather than high-speed analog instrumentation, and timing analysis should compare the propagation delay with the system setup and hold requirements. Because the package uses a 20-pin DIP footprint, it also suits older repair platforms where adding a new surface-mount footprint would be impractical.

🧩

Prototyping and Legacy Logic Repair

SN74LS540H is well suited to prototyping and repair of through-hole digital logic boards that call for eight buffered, inverted, three-state lines. The DIP-20 package permits straightforward socketed assembly and replacement of an existing 74LS540-family device after pin and construction checks. Its shared output-enable behavior makes it useful for isolating a failed subsystem from a common bus during diagnosis. When fitting the part, verify that the target board expects an active-low enable and eight inverting channels rather than the non-inverting SN74LS541 function. Also confirm supply tolerance, operating-temperature requirements, and whether the original assembly specifically required a hermetic package before treating a plastic or manufacturer-alternate DIP as equivalent.

おすすめ製品の概要

SN74LS244N Texas Instruments 使用用途: Shared Digital Data Bus, Legacy Industrial Control Interface, Computer Peripheral Data Interface, Digital Test and Measurement Equipment, Instrumentation Signal Routing, Prototyping and Legacy Logic Repair SN74LS245N Texas Instruments 使用用途: Shared Digital Data Bus, Computer Peripheral Data Interface SN74LS373N Octal transparent latch for bus data storage 使用用途: Shared Digital Data Bus, Computer Peripheral Data Interface SN74LS240N Texas Instruments 使用用途: Legacy Industrial Control Interface, Instrumentation Signal Routing, Prototyping and Legacy Logic Repair SN74LS138N Address decoder for selecting buffer groups 使用用途: Legacy Industrial Control Interface, Digital Test and Measurement Equipment, Instrumentation Signal Routing SN74LS125N Four-channel individually enabled buffer 使用用途: Digital Test and Measurement Equipment SN74LS541N Texas Instruments 使用用途: Prototyping and Legacy Logic Repair
What is the SN74LS540H?
The SN74LS540H is an eight-channel inverting buffer and line driver with common 3-state outputs, operated from a 4.75 V to 5.25 V bipolar TTL supply. According to the Texas Instruments SN74LS540 datasheet SDLS180, the device has eight inverters, one common active-low output-enable input, and input and output pins positioned on opposite sides of its 20-pin DIP package.
What is the operating voltage of SN74LS540H?
The SN74LS540H operates from 4.75 V to 5.25 V. The Texas Instruments SN74LS540 product page identifies the device as an 8-channel bipolar inverter with 3-state outputs for that supply range. Design the circuit around a regulated 5 V rail and verify that its voltage remains within these limits during startup, load changes, and temperature extremes.
How many channels and output enables does SN74LS540H have?
The SN74LS540H has eight independent inverting channels and one common active-low output-enable input. When enable is low, all eight outputs actively drive inverted data; when enable is high, all eight outputs enter the high-impedance state. The Texas Instruments datasheet SDLS180 identifies the device as an octal buffer/line driver with 3-state outputs.
Where can I download the SN74LS540H datasheet PDF?
The SN74LS540H datasheet PDF is available through the official Texas Instruments document link on this page, while the onsemi orderable part is identified by SN74LS540H. The linked PDF is titled “Octal Buffers and Line Drivers With 3-State Outputs,” carries document identifier SDLS180, and contains the logic, electrical characteristics, and package information for the SN74LS540 family.
Where is the SN74LS540H pinout?
The SN74LS540H pinout places the eight data inputs on one side of the 20-pin DIP and the eight data outputs on the other side, with power, ground, output enable, and a no-connect position completing the package. Use the manufacturer pin-description table in datasheet SDLS180 when assigning PCB tracks, particularly for the active-low enable and high-impedance output behavior.
Can SN74LS540H drive a shared bidirectional bus?
The SN74LS540H can provide the buffering side of a shared bus because its outputs can be disabled, but its channels are inverting and share one enable control. It does not provide independent direction control for each channel and does not include true bidirectional I/O operation. A bus transceiver or separately controlled buffer may be preferable when bidirectional signaling and per-channel direction control are required.
What is the difference between SN74LS540H and SN74LS540N?
Both parts implement the same eight-channel inverting 3-state buffer function, but the orderable suffix denotes different package construction. SN74LS540H is the hermetic DIP option associated with the target MPN, whereas SN74LS540N is the plastic DIP ordering option. Their electrical logic function and 20-pin footprint support drop-in use when the mechanical and environmental requirements match.
What is the best drop-in replacement for SN74LS540H?
SN74LS540N is the closest functional drop-in option because it retains eight inverting channels, a common active-low output enable, 3-state outputs, and the 20-pin DIP pin arrangement. Confirm the mechanical construction, temperature grade, radiation qualification, and lifecycle requirements before substituting it where the hermetic SN74LS540H package is required for environmental or legacy-system reasons.
Is SN74LS540H suitable for high-impedance bus isolation?
Yes, SN74LS540H is suitable for controlling a group of eight bus outputs in the high-impedance state. The common active-low output-enable input controls all channels together, so disabled outputs do not actively fight an enabled driver on the same bus. This is appropriate when the eight outputs share a switching policy rather than requiring independent channel-by-channel enable control.
SN74LS540H vs SN74LS541H - which is better for a data bus?
Choose SN74LS540H when the receiving system expects inverted data; choose SN74LS541H when non-inverting data is required. The Texas Instruments SN74LS540 datasheet describes SN74LS541 as the non-inverting member of the family. Both provide eight channels and common 3-state output control, but their output logic polarity differs, so they are not interchangeable without accounting for inversion.
When should I choose SN74LS540H instead of SN74LS241H?
Choose SN74LS540H when the system requires inverted outputs and a single common 3-state enable for all eight channels. SN74LS241H provides the non-inverting counterpart, so it is preferable when downstream logic expects the same polarity as its inputs. Either choice requires the same 5 V bipolar TTL supply family and careful interpretation of the enable polarity.
Where can I buy SN74LS540H and what is its lead time?
Use the “Request a Quote” form on this page to request SN74LS540H availability, current lead time, and minimum order quantity. The form allows you to specify the required quantity and package configuration without relying on a stale stock count. It is the appropriate channel for quote-based procurement and production-planning questions.
How much does SN74LS540H cost?
The current SN74LS540H price should be requested through the “Request a Quote” form on this page because commercial pricing can change with quantity, packaging, and supply status. The form is the fastest way to obtain a current quotation for the exact onsemi MPN, including any quantity breaks and expected shipment timing.
Is SN74LS540H in stock?
Use the “Request a Quote” form on this page to check current SN74LS540H stock and allocation. The LCSC product result identifies the exact MPN as in stock, but stock levels can change rapidly and may not represent the quantity required for production. Submit the required quantity to obtain a current availability response.
What can replace SN74LS540H?
SN74LS540N is the principal drop-in replacement because it preserves the eight-channel inverting 3-state function, common active-low output enable, and 20-pin DIP footprint. A qualified 74LS540 from another established manufacturer may also be considered when its electrical limits and environmental ratings meet the design. Verify pinout, enable polarity, supply range, and package construction before substitution.
What are the key specifications of SN74LS540H that engineers should know?
The key SN74LS540H specifications are eight inverting channels, common 3-state outputs, a 4.75 V to 5.25 V operating supply, one active-low output enable, and a 20-pin DIP package. According to Texas Instruments datasheet SDLS180, the SN74LS540 family places inputs and outputs on opposite sides of the package. Exact propagation delay, output-current limits, and temperature limits should be checked against the required system conditions.

エンジニアリング参考データ: SN74LS540H — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose SN74LS540H when a legacy 5 V system needs eight buffered, inverted logic lines with a shared active-low three-state enable and a 20-pin DIP footprint. SN74LS540N is the closest onsemi replacement when the application does not specifically require hermetic package construction. A qualified 74LS540 or DM74LS540 can be considered when the replacement source's electrical limits, temperature grade, lifecycle status, and package dimensions meet the system requirements. SN74LS541N should be selected when non-inverting data is required rather than inverted data. SN74LS244N is useful where non-inverting buffers are needed, while a bidirectional transceiver such as SN74LS245N is more appropriate for a bus that must support true bidirectional data flow. Before approving any substitute, verify pinout, enable polarity, supply voltage, propagation timing, output loading, and package construction.

代替品との比較

パラメータ この製品 SN74LS540N SN74LS540J SN74LS540N 74LS540 DM74LS540
Brand onsemi onsemi Texas Instruments Texas Instruments Motorola, Inc onsemi
Package DIP-20 DIP-20 DIP-20 DIP-20 DIP-20 DIP-20
Number of Channels 8 channels 8 channels 8 channels 8 channels 8 channels 8 channels
Logic Function Octal inverting buffer/line driver Octal inverting buffer/line driver Octal inverting buffer/line driver Octal inverting buffer/line driver Octal inverting buffer/line driver Octal inverting buffer/line driver
Output State 3-state 3-state 3-state 3-state 3-state 3-state
Operating Supply Voltage Range 4.75 V to 5.25 V 4.75 V to 5.25 V 4.75 V to 5.25 V 4.75 V to 5.25 V 4.75 V to 5.25 V 4.75 V to 5.25 V
Output Enable One common active-low output enable One common active-low output enable One common active-low output enable One common active-low output enable One common active-low output enable One common active-low output enable
Logic Technology Bipolar TTL Bipolar TTL Bipolar TTL Bipolar TTL Bipolar TTL Bipolar TTL
Input/Output Pin Arrangement Inputs and outputs on opposite package sides Inputs and outputs on opposite package sides Inputs and outputs on opposite package sides Inputs and outputs on opposite package sides Inputs and outputs on opposite package sides Inputs and outputs on opposite package sides

主な差別化要因

  • Common 3-state control for all eight channels (vs SN74LS244N)
  • Opposite-side input and output arrangement (vs SN74LS240N)
  • Inverting octal logic retains standard 74LS540 behavior (vs SN74LS541N)

設計ノート

Do not treat the high-impedance output state as a driven logic level. When the common active-low output-enable input is high, SN74LS540H releases all eight outputs, and external pull-up or pull-down components determine the voltage seen by connected receivers if the bus is otherwise floating. Confirm that the system intentionally permits this condition. Also verify inversion at the receiver, because every enabled channel reverses the input logic state.

Follow the DIP-20 pin arrangement in datasheet SDLS180 and keep the eight data inputs on one side of the package and the eight outputs on the other. Place the device close to the connector or bus being buffered, and keep the common output-enable trace away from sensitive analog or high-speed timing paths. Provide a low-impedance ground reference and use a solid ground plane rather than routing return current through narrow signal traces.

Analyze setup, hold, propagation delay, fanout, and rise/fall-time requirements before using SN74LS540H in a high-speed bus. The bipolar TTL output stages are intended for conventional 5 V logic systems, so long PCB traces, heavily capacitive loads, or repeated fanout branches may reduce timing margin. Keep the shared enable synchronized with the bus source-selection logic and avoid enabling the device while another driver remains active on the same nets.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

Compliance declarations were not identified for the exact onsemi SN74LS540H orderable MPN. AEC-Q100 status is not applicable because this is a general-purpose bipolar logic IC rather than an automotive-qualified device.

データ検証日: 2026-11-14 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

SN74LS540H datasheet SN74LS540H pinout SN74LS540H datasheet pdf SN74LS540H DIP-20 onsemi SN74LS540H SN74LS540H equivalent SN74LS540H replacement SN74LS540H vs SN74LS541N SN74LS540H price SN74LS540H stock SN74LS540 3-state buffer application

関連部品&用語

onsemi Texas Instruments SN74LS540H SN74LS540N SN74LS540J SN74LS541N SN74LS244N SN74LS240N SN74LS245N 74LS540 DM74LS540 bipolar TTL logic buffer line driver three-state output inverting buffer high-impedance state DIP-20 dual inline package active-low output enable shared digital bus industrial control computer peripheral interface digital test equipment instrumentation
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示