ST10R167-Q3 - 16-Bit 25MHz ROMless MCU | STMicroelectronics
部品番号: ST10R167-Q3 ✗ 生産終了| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $24.5 | $24.50 |
| 10 | $22.1 | $221.00 |
| 100 | $19.6 | $1,960.00 |
| 500 | $17.8 | $8,900.00 |
| 1,000 | $16.4 | $16,400.00 |
ST10R167-Q3 概要
A ROMless microcontroller is a member of the microcontroller (MCU) hierarchy that contains no internal non-volatile program memory; it executes code stored in external EPROM, flash, or EEPROM devices. Within the power-management-of-compute hierarchy, the ST10R167-Q3 sits in the 16-bit embedded microcontroller class, positioned above simple 8-bit MCUs and below 32-bit parts, making it a classic choice for real-time embedded control systems that need external, field-updatable firmware.
Key differentiating features include the 4-stage pipelined 16-bit CPU delivering 12.5 MIPS, enhanced boolean bit-manipulation facilities, additional instructions supporting high-level languages and operating systems, on-chip PLL clock generation from a low-frequency crystal, a high-speed synchronous serial channel (SSC), and the CAN 2.0B module for robust vehicle and industrial networking. According to the STMicroelectronics datasheet, the device operates from a 4.5V to 5.5V supply over a -40C to +125C temperature range (the Q3 suffix grade).
Architecturally, the ST10R167 derives from the proven ST10 (SAB 80C166-derived) family, combining a fast Harvard-style memory structure with a rich peripheral event controller that handles interrupt-driven I/O with minimal CPU overhead. The external bus interface supports multiplexed or demultiplexed modes, letting designers size code memory to the application.
Typical applications include automotive engine management and body electronics, industrial motor control and automation, communication equipment, and instrumentation systems where 16-bit real-time performance plus CAN connectivity are required.
A key design consideration is that the ROMless architecture mandates external program memory: budget bus timing, wait states, and PCB routing for the external bus, and verify that the 4 KB on-chip RAM is sufficient for data and stack in your real-time workload.
This page adds engineering value beyond the manufacturer datasheet by compiling drop-in family alternatives, pricing context, design notes, and application guidance in one structured, machine-readable resource.
ドロップイン代替品: ST10R167-Q3 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
クイック比較ツール — 並列比較する代替部品を選択:
ST10R167-Q6
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
ST10F167
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
ST10R163-Q3
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
ST10R167-Q3/TR
✅ ドロップイン📋 参考代替品（カタログ未掲載）
ST10F269
✅ ドロップイン📋 参考代替品（カタログ未掲載）
ST10R167-Q3 最大定格＆電気的特性
| Core Processor | ST10 16-bit CPU, 4-stage pipeline |
| Core Size | 16-bit |
| 最大クロック周波数 | 25 MHz |
| Instruction Cycle Time | 80 ns at 25 MHz |
| Performance | 12.5 MIPS |
| Program Memory Type | ROMless (external) |
| RAM Size | 4 KB on-chip high-speed RAM |
| Number of I/O | 111 |
| CAN Interface | 1 x CAN 2.0B |
| A/D Converter | 16 x 10-bit |
| Serial Interfaces | SSC (high-speed synchronous serial channel), ASC |
| Oscillator Type | Internal (PLL clock generation) |
| 電源電圧 | 4.5 V to 5.5 V |
| 動作温度 | -40C to +125C |
| パッケージ / ケース | 144-PQFP (28x28 mm) |
| 実装タイプ | Surface Mount |
| External Bus Interface | Multiplexed / demultiplexed external memory bus |
ST10R167-Q3 144-pqfp (28x28 mm) ピン配置ガイド
ST10R167-Q3 (144-pqfp (28x28 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: ST10R167-Q3.
詳細は データシート をご参照ください。
主な用途
ST10R167-Q3 の用途: 6 件s: Automotive Engine and Body Control, Industrial Motor Control and Automation, Communication Equipment Controllers, Instrumentation and Test Equipment, Embedded Real-Time Control Systems, Legacy System Maintenance and Repair.
Automotive Engine and Body Control
The ST10R167-Q3 fits automotive electronic control units because the Q3 grade is specified from -40C to +125C and the integrated CAN 2.0B controller connects directly to in-vehicle networks such as powertrain and body buses. The 16-bit CPU executes a 4-stage pipeline at 25 MHz, delivering 12.5 MIPS with an 80 ns instruction cycle, which is sufficient for closed-loop engine timing, valve control, and body-function scheduling. The 16-channel 10-bit ADC digitizes sensor inputs (temperature, pressure, throttle position) without external conversion hardware. In this application the ROMless architecture allows the ECU firmware to live in external flash or EPROM, simplifying variant management across vehicle platforms; the trade-off is extra board area and bus routing for the code memory devices.
おすすめ
Industrial Motor Control and Automation
For variable-frequency drives, servo controllers, and PLC modules, the ST10R167-Q3 offers the peripheral event controller and enhanced capture/compare timer resources typical of the ST10 family, letting PWM generation and sensor sampling proceed with minimal CPU intervention. The 12.5 MIPS core headroom covers field-oriented control inner loops at moderate switching frequencies, while the 16-channel 10-bit ADC reads current-shunt and position feedback across multiple phases. Its 111 I/O lines interface directly to contactors, encoders, and HMI signals, and the CAN 2.0B port links the drive onto industrial fieldbus segments. Because industrial drives need field-updatable firmware, most implementations place code in external flash via the demultiplexed bus interface; designers should budget wait states so memory access time does not erode the 80 ns instruction-cycle advantage.
おすすめ
Communication Equipment Controllers
Line-card supervision, protocol conversion nodes, and telecom backplane controllers benefit from the ST10R167-Q3 combination of a synchronous serial channel (SSC) for high-speed slave/master communication with other processors, a general-purpose asynchronous serial channel, and CAN for equipment-level management networks. The SSC's double-buffered transmit/receive with its own 16-bit baud-rate generator offloads serial framing from the CPU, preserving pipeline throughput for protocol stack code held in external memory. The 5V I/O tolerance matches legacy telecom board-level signaling directly, avoiding level-shift stages that a 3.3V modern MCU would require. Systems with high code volumes use the ROMless external bus to map large EPROM/flash images, and the 4 KB on-chip RAM serves as a zero-wait-state stack and variable area for the real-time executive.
おすすめ
Instrumentation and Test Equipment
Bench instruments, data loggers, and process meters exploit the ST10R167-Q3's 16-channel 10-bit ADC to multiplex many analog sensor channels into one conversion block, while the 12.5 MIPS core performs scaling, linearization, and display formatting in real time. The Q3 automotive temperature rating of -40C to +125C also makes the device acceptable for ruggedized field instruments exposed to outdoor environments. The on-chip PLL generates the 25 MHz system clock from a lower-frequency crystal, easing EMC design in sensitive measurement front ends by allowing slower crystal oscillation. Because instrument firmware typically grows over a product's life, storing code in a socketed external flash on the ROMless bus enables field upgrades without replacing the microcontroller - a key maintenance advantage for installed instrument fleets.
おすすめ
Embedded Real-Time Control Systems
General real-time embedded systems - from building control panels to vending and gate controllers - use the ST10R167-Q3 where deterministic 16-bit execution, bit-manipulation instructions, and rich interrupt structures matter more than raw processing power. The ST10 instruction set includes enhanced boolean operations that map switch-contact logic and interlock chains directly onto peripheral registers and port bits, and additional instructions supporting high-level languages and operating systems simplify development under a small RTOS. The 111 GPIOs drive keypads, relays, and indicators, while the external bus supports the memory expansion that larger application code requires. Designers should partition time-critical routines into the 4 KB on-chip RAM to exploit zero-wait-state access, keeping the external bus for less timing-sensitive code.
おすすめ
Legacy System Maintenance and Repair
A substantial installed base of ST10-based controllers in automotive, industrial, and medical equipment still requires board-level repair and low-volume reproduction. For these spares and repair workflows, the ST10R167-Q3 remains procurable through distributors (DigiKey listing showed same-day shipping as of 2026-10-07) and the broker network aggregated by Octopart across 27 distributors. Replacement boards can reuse the original external memory map and firmware images unchanged because the device is drop-in compatible with prior ST10R167 grades in the 144-PQFP footprint. Maintenance engineers should verify date codes and buy buffer stock given end-of-life status, and where stock tightens, the same-package ST10F167/ST10R163 family members provide fallback options after a pinout and timing review against the respective datasheets.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ST10R167-Q3 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | ST10R167-Q6 | ST10F167 | ST10R163-Q3 | ST10F269 |
|---|---|---|---|---|---|
| Package | 144-PQFP (28x28 mm) | 144-PQFP (28x28 mm) - same | 144-PQFP (28x28 mm) - same | 144-PQFP (28x28 mm) - same | 144-PQFP (28x28 mm) - same |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Program Memory | ROMless (external) | ROMless (external) | — | ROMless (external) | On-chip Flash (larger) |
| CAN Interface | 1 x CAN 2.0B | 1 x CAN 2.0B | 1 x CAN 2.0B | CAN capability per variant | 2 x CAN (per family docs) |
| Supply Voltage | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 5 V (4.5 V to 5.5 V) | 5 V (4.5 V to 5.5 V) | 5 V (4.5 V to 5.5 V) |
主な差別化要因
- External code flexibility with proven 16-bit core （vs ST10F167)
- Higher performance headroom within the same footprint （vs ST10R167-Q6)
- Full peripheral set vs reduced variant （vs ST10R163-Q3)
設計ノート
The ROMless external bus dominates the PCB layout of an ST10R167-Q3 system. In demultiplexed mode, latch the multiplexed address with a 74x573-class transparent latch clocked by ALE, and keep the latch within a few centimeters of the MCU to preserve setup/hold margins at 25 MHz. Route the 16-bit data bus as short, direct traces and avoid stubs on address lines. Place a 100 nF ceramic decoupling capacitor at every VDD/VSS pin pair plus one bulk 10 uF per supply domain, and connect the analog ADC supply according to the datasheet reference-design filtering to protect 10-bit conversion accuracy.
Verify external memory speed against the bus controller configuration. At 25 MHz the instruction cycle is 80 ns; with zero wait states the external code memory must be fast enough for the selected bus mode. If using 90 ns or 120 ns flash/EPROM, program the MCTC (memory cycle time) wait-state fields accordingly - a misconfigured wait-state setting is the most common cause of intermittent ST10 failures that appear only at hot temperature or low supply voltage. Also confirm the RESET pin circuit: the datasheet states an internal pull-up permits power-on reset using only a capacitor to VSS, so size it for the required reset duration while the oscillator starts.
The device requires a regulated 5V rail (4.5 V to 5.5 V) across the full -40C to +125C range; in automotive contexts add transient protection (load-dump clamping and reverse polarity handling) upstream of the MCU per STMicroelectronics ST10 application notes. Estimated: total current is the core ICC plus I/O load; with many of the 111 outputs driving LED or optocoupler loads, I/O current can exceed core current, so budget the supply regulator for the sum, not the datasheet ICC alone. Sequence external memory and bus transceivers with the MCU or ensure all 5V devices tolerate simultaneous power-up to avoid bus contention during reset.
コンプライアンス情報
Compliance data was not present in the verified web data for this legacy EOL part. Check the STMicroelectronics product page or distributor compliance certificates for the specific date code.
