STM32F072V8T6 - 48MHz 64KB Cortex-M0 MCU | STMicroelectronics
부품 번호: STM32F072V8T6 ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $2.7757 | $2.78 |
| 10 | $2.7757 | $27.76 |
| 100 | $2.7757 | $277.57 |
| 500 | $2.7757 | $1,387.85 |
| 1,000 | $2.7757 | $2,775.70 |
STM32F072V8T6 개요
What is an STM32F0-series microcontroller? It is a 32-bit embedded microcontroller, a category of microcontroller and semiconductor device used to monitor sensors, operate actuators, process data, and control communication interfaces. The STM32F072V8T6 belongs to the STM32 family hierarchy: STM32F072V8T6 > STM32F0 series > STM32 family > ARM Cortex-M0 microcontroller > embedded processor > semiconductor. Its combination of USB and CAN connectivity is useful for industrial control, USB peripherals, automotive-style communication subsystems, and compact consumer equipment.
Key verified features include a 32-bit ARM Cortex-M0 core, a maximum 48 MHz operating frequency, 64 KB Flash, and 16 KB SRAM. The listed package is 100-LQFP, 14 x 14 mm, providing a larger pin count than lower-density STM32 packages and exposing more GPIO and peripheral options. The device is identified by distributor sources as a USB-line MCU with USB, CAN, and communication interfaces. The verified Mouser listing specifically identifies the part as an ARM Cortex-M0 USB-line MCU with 64 KB Flash, USB, and CAN.
The STM32F072V8T6 architecture combines a compact general-purpose core with dedicated peripherals for analog measurement, timing, communications, and control. USB and CAN support can reduce the need for separate interface devices in connected embedded systems. The 100-LQFP package is useful when a design requires more externally accessible pins than smaller packages provide, while its 14 x 14 mm footprint remains compact compared with many higher-pin-count packages. The exact ADC, DAC, timer, voltage, and pin-level parameters are not present in the supplied verified snippets, so those values are marked as data needed rather than inferred.
Typical applications include USB-connected data acquisition, industrial sensor controllers, CAN-based equipment, motor and actuator control, embedded gateways, and compact automation products. For USB applications, the MCU can manage device communication alongside timers and analog functions. For CAN-based systems, it can combine network communication with local control and data processing. Compared with a simpler microcontroller, its USB and CAN integration can reduce component count, although firmware, peripheral configuration, and device-specific validation remain necessary.
The primary design consideration is package planning. A 100-LQFP footprint is not interchangeable with smaller STM32 packages without a PCB redesign, so power, ground, decoupling, signal-routing, and programming access must be planned against the verified 100-pin package. Firmware should also be validated against the exact STM32F072V8T6 datasheet, especially for pin multiplexing, peripheral electrical limits, clock configuration, and USB/CAN timing. Pricing shown in the verified LCSC result is $2.7757 as of 2026-10-22; distributor availability and prices can change.
This product data page combines the verified manufacturer and distributor identity, 48 MHz Cortex-M0 positioning, 64 KB Flash, 16 KB SRAM, USB, CAN, and the 100-LQFP package with practical sourcing and design context. It does not infer unreported electrical limits or claim a substitute part unless the supplied cross-reference evidence establishes same-package compatibility.
드롭인 대체품: STM32F072V8T6 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: STM32F072V8T6 (동일 폼 팩터 및 풋프린트) — 차이점: Architecture, Core, Flash Memory, Package, Product Type.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
STM32F071V8T7
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
STM32F071V8T6
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
STM32F072V8T6 최대 정격 & 전기적 특성
| Core | ARM Cortex-M0, 32-bit RISC |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 64 KB |
| SRAM | 16 KB |
| Product Series | STM32F0 series |
| Product Type | USB-line microcontroller with USB and CAN |
| Architecture | 32-bit ARM Cortex-M0 embedded microcontroller |
| 패키지 | 100-LQFP, 14 x 14 mm |
| 핀 수 | 100 pins |
| 실장 유형 | Surface Mount |
| USB Interface | USB |
| CAN Interface | CAN |
| Communication Interfaces | USB, CAN, and serial communication interfaces |
| ADC | Available according to the verified STM32F072 family description |
| DAC | Available according to the verified STM32F072 family description |
| Timers | Embedded timers |
STM32F072V8T6 100-lqfp, 14 x 14 mm 핀 구성 가이드
STM32F072V8T6(100-lqfp, 14 x 14 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: STM32F072V8T6.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
STM32F072V8T6 적합 용도: 6 애플리케이션s: USB Connected Data Acquisition, CAN-Based Industrial Controller, Industrial Sensor Hub, Motor and Actuator Control, USB-to-CAN Embedded Gateway, Compact Automation Controller.
USB Connected Data Acquisition
The STM32F072V8T6 fits USB-connected measurement systems because it combines a 48 MHz ARM Cortex-M0 core with 64 KB Flash, 16 KB SRAM, USB, and embedded analog and timer resources. It can sample sensors, format data, and present a USB device interface without requiring a separate USB controller. The 100-LQFP package provides 100 externally accessible pins, which is useful when the design needs numerous GPIO, debug, control, or peripheral connections. Firmware should confirm USB clock requirements, endpoint configuration, power states, and device enumeration behavior against the manufacturer datasheet. Because the verified results do not provide exact ADC or USB timing values, those details must be validated before production release.
추천
CAN-Based Industrial Controller
STM32F072V8T6 is suitable for compact CAN-connected control equipment because the verified Mouser listing identifies both USB and CAN, while the 48 MHz Cortex-M0 core provides control-processing capability and the 100-LQFP package exposes a broad pin set. A controller can receive commands over CAN, execute timing or state-machine logic, and report status over USB or CAN diagnostics. Design work should verify transceiver requirements, bus termination, isolation, fault handling, and peripheral clock configuration. The verified data confirms CAN capability but does not specify the exact CAN version, transceiver pins, or electrical limits, so those values remain subject to datasheet verification.
추천
Industrial Sensor Hub
The STM32F072V8T6 can act as a central controller in an industrial sensor hub where several inputs are sampled, conditioned, timestamped, and forwarded over USB or CAN. Its 16 KB SRAM supports protocol buffers and working state, while 64 KB Flash provides room for application firmware and configuration. The 100-LQFP package is helpful when the system needs numerous GPIO and communication connections in a compact 14 x 14 mm body. Engineers should verify the exact ADC resolution, conversion timing, input impedance, DAC availability, and operating-temperature range from the complete manufacturer documentation rather than relying on the distributor snippets.
추천
Motor and Actuator Control
STM32F072V8T6 is appropriate for basic motor, relay, and actuator-control platforms because its 48 MHz Cortex-M0 core can execute deterministic control logic while USB and CAN provide monitoring or command links. The 100-LQFP package offers more pins than compact low-pin-count MCUs, which can simplify routing of PWM outputs, feedback inputs, fault signals, and communication interfaces. A practical design must still confirm timer channel assignments, pin alternate functions, maximum GPIO current, supply voltage, and thermal conditions using the official datasheet. STM32F072V8T6 is therefore a suitable controller platform, not a substitute for a dedicated motor-driver IC.
추천
USB-to-CAN Embedded Gateway
STM32F072V8T6 can serve as the protocol-processing core in a compact embedded gateway that accepts USB host commands and exchanges data with CAN-connected equipment. The verified product identity explicitly includes USB and CAN, making it a logical fit for bridging PC configuration software with an industrial network. Its 64 KB Flash and 16 KB SRAM should be assessed against protocol stack, logging, security, and update requirements. Firmware architecture should include timeout handling, bus-off recovery, firmware update policy, and fault containment. Exact peripheral mapping, USB electrical requirements, and CAN timing must be verified from the manufacturer documentation.
추천
Compact Automation Controller
The STM32F072V8T6 is useful in compact automation controllers that coordinate digital I/O, timing functions, communications, and local decisions. Its 32-bit Cortex-M0 architecture operates up to 48 MHz, while the STM32F0 family context supports a familiar embedded development ecosystem. The 100-LQFP footprint provides routing flexibility for power, ground, communications, and control signals in a 14 x 14 mm package. Before selecting it for a new controller, validate startup behavior, I/O levels, watchdog strategy, brownout behavior, peripheral availability, and environmental requirements. The verified snippets do not provide all of those limits, so a datasheet-based sign-off remains necessary.
추천
추천 제품 요약
엔지니어링 참조 데이터: STM32F072V8T6 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | STM32F071V8T7 | STM32F071V8T6 |
|---|---|---|---|
| Package | 100-LQFP, 14 x 14 mm | 100-LQFP | 100-LQFP |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics |
주요 차별점
- Integrated USB and CAN connectivity (vs STM32F071V8T7)
- 64 KB Flash and 16 KB SRAM positioning (vs STM32F071V8T6)
- 100-LQFP package with 14 x 14 mm body (vs STM32F071V8T7)
설계 노트
Design the 100-LQFP footprint against the manufacturer package drawing rather than a generic LQFP footprint. Confirm pad length, width, pitch, pin numbering, exposed thermal considerations, and solder-mask clearance. Because the verified data confirms a 14 x 14 mm 100-pin package but does not provide the full pin table, do not assign USB, CAN, timers, or debug functions until the official pinout is checked.
Plan the power tree early because USB, CAN, analog peripherals, and digital I/O may share the MCU supply domain. Follow the manufacturer recommended decoupling values and supply sequencing requirements from the datasheet. The supplied verified results do not include operating-voltage limits, absolute maximum ratings, or regulator recommendations, so these values must be obtained from the official documentation before schematic sign-off.
Do not substitute a smaller STM32 package or a related STM32F0 MPN solely because the core or memory family is similar. USB and CAN capabilities, pin multiplexing, clocking, memory size, and package pinout can differ materially. For any proposed replacement, compare the official datasheets and validate the PCB footprint, firmware target, boot behavior, and peripheral mapping before production release.
규정 준수 정보
The supplied verified snippets identify the manufacturer, electrical identity, package, interfaces, and distributor availability, but do not provide verified RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements. Compliance fields are therefore left unknown.
