STM32L152CBT6 - 32MHz Cortex-M3 128KB MCU | STMicroelectronics
部品番号: STM32L152CBT6 ✓ 生産中STM32L152CBT6 概要
An ultra-low-power microcontroller is a semiconductor designed to complete embedded control tasks while consuming as little energy as practical. The STM32L1 family belongs to the broader hierarchy of embedded processors, microcontrollers, 32-bit ARM microcontrollers, and power-management-oriented embedded devices. This combination makes the STM32L152CBT6 suitable for systems that must monitor sensors, control actuators, and manage communications over long operating periods between maintenance cycles.
The device provides 128KB of flash memory for program storage and operates at up to 32MHz. Its 48-LQFP package exposes the GPIO, communication, debug, clock, and power functions required by a medium-complexity embedded design. The STM32L152CBT6 also belongs to the STM32L152 device family, which is identified in the product listing as an ultra-low-power Cortex-M3 MCU with LCD-oriented features. Confirm the complete peripheral and electrical details against the manufacturer datasheet before finalizing a design.
The principal architectural benefit is the combination of a 32-bit ARM Cortex-M3 processing core with low-power-oriented design in a conventional 7 x 7 mm LQFP footprint. This architecture is useful when firmware requires more general computation than an 8-bit MCU while the product must still operate from a constrained energy budget. The package offers enough pin count for external sensors, displays, communication transceivers, and general-purpose control signals.
Typical applications include low-power sensor nodes, industrial monitoring equipment, compact data-acquisition devices, battery-powered controllers, LCD-equipped human-interface equipment, and embedded systems requiring multiple peripheral functions around a single microcontroller. The target device can also support connected measurement systems where its flash capacity accommodates application firmware, configuration data, and protocol handling.
For PCB implementation, follow the manufacturer pin-description and land-pattern tables when assigning tracks and decoupling. Pay particular attention to supply-voltage limits, oscillator connections, reset behavior, boot configuration, and exposed ground requirements. Firmware changes should also account for the STM32L152 family option-byte and low-power-mode behavior rather than assuming the behavior of a general-purpose STM32 device.
This page combines package, memory, clock, lifecycle, sourcing, and replacement information with application guidance and engineering-oriented comparisons. It also identifies which substitute candidates have documented package and memory compatibility, helping designers distinguish a mechanically similar MCU from a part that can actually be considered for a drop-in redesign.
ドロップイン代替品: STM32L152CBT6 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: STM32L152CBT6 (同一形状・フットプリント) — 相違点: Architecture, Flash Memory, Operating Voltage, Package, Product Type.
STM32L152CBT6A
✅ ドロップイン📋 参考代替品(カタログ未掲載)
STM32L152C8T6
✅ ドロップイン価格はお問い合わせください
データシートを見る →STM32L151CBT6TR
✅ ドロップイン📋 参考代替品(カタログ未掲載)
STM32L152CBT6 最大定格&電気的特性
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Series | STM32L1 |
| CPU Core | ARM Cortex-M3 |
| 最大クロック周波数 | 32 MHz |
| Flash Memory | 128KB (128K x 8) |
| Data-Width | 32 bit |
| パッケージ | 48-pin LQFP (7 x 7 mm) |
| 実装タイプ | Surface mount |
| Architecture | ARM-based ultra-low-power MCU |
| LCD Feature | Yes |
| ADC Resolution | 12 bit |
| Operating Voltage | 2.5 V or 3.3 V |
STM32L152CBT6 48-pin lqfp (7 x 7 mm) ピン配置ガイド
STM32L152CBT6 (48-pin lqfp (7 x 7 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: STM32L152CBT6.
詳細は データシート をご参照ください。
主な用途
STM32L152CBT6 の用途: 6 件s: Battery-Powered Environmental Sensors, Industrial Process Monitoring, Compact Data-Acquisition Systems, LCD Human-Interface Equipment, Low-Power Control and Actuator Hubs, Connected Measurement and Telemetry.
Battery-Powered Environmental Sensors
The STM32L152CBT6 fits environmental monitoring nodes that combine periodic sensing, local filtering, and low-power sleep operation. Its 32-bit Cortex-M3 core and 128KB flash provide room for application firmware, calibration tables, and communication handlers, while the STM32L1 family is oriented toward energy-constrained embedded systems. The 48-LQFP package also exposes sufficient pins for sensor inputs, status indicators, and a low-power serial transceiver. Power-budget calculations should include sensor excitation, regulator loss, wake-up processing, and radio transmission rather than evaluating only the microcontroller.
おすすめ
Industrial Process Monitoring
The STM32L152CBT6 is suitable for industrial monitoring modules that acquire sensor data, apply filtering, record operating events, and report status through a serial interface. Its 32MHz Cortex-M3 processing core can handle protocol framing and control logic, while 128KB of flash supports embedded application code. The 48-LQFP package provides a practical number of GPIO and peripheral connections for discrete sensors and interface circuits. In industrial equipment, follow the manufacturer grounding and decoupling guidance and validate the selected supply range against the exact operating conditions.
おすすめ
Compact Data-Acquisition Systems
The STM32L152CBT6 can serve as the control MCU in a compact data-acquisition system that samples analog inputs, timestamps events, and transfers results to a host or network controller. The indexed listing identifies 12-bit conversion capability and a maximum clock frequency of 32MHz, while the 128KB flash capacity accommodates acquisition firmware and buffers. Use the manufacturer pin-description table to assign converter, reference, and communication signals, and account for analog input limits, acquisition timing, and memory requirements before selecting external support components.
おすすめ
LCD Human-Interface Equipment
The STM32L152CBT6 is appropriate for compact LCD-equipped instruments because the STM32L152 family is identified as an LCD-oriented microcontroller with 128KB flash and a 48-LQFP package. It can coordinate display updates, keypad input, measurement control, and status indication within one embedded platform. The 32MHz Cortex-M3 core provides more headroom for graphical formatting than a basic 8-bit controller. Actual segment count, LCD drive capability, pin assignments, and timing requirements must be checked in the manufacturer documentation for the specific display configuration.
おすすめ
Low-Power Control and Actuator Hubs
The STM32L152CBT6 is well suited to a low-power actuator hub that reads local commands, controls relays or valves, monitors feedback, and sleeps during inactive periods. Its 128KB flash supports control logic and configuration, while the 48-LQFP package offers enough connections for multiple digital I/O and communication functions. The key engineering trade-off is that response latency and average energy use depend on the selected wake-up sources and low-power mode. Validate those behaviors against the manufacturer reference manual rather than inferring them from the CPU frequency.
おすすめ
Connected Measurement and Telemetry
The STM32L152CBT6 can serve as the low-power measurement engine in connected telemetry equipment that packages sensor readings and transmits them through a UART, SPI, or other supported interface. Its 128KB flash provides substantial firmware space for drivers, protocol stacks, and calibration, while the 32MHz Cortex-M3 core supports responsive foreground processing. The 48-LQFP package simplifies access to multiple serial and digital signals. Select external transceivers according to the link voltage, speed, isolation, and power requirements, and confirm the MCU's available peripheral pins for the final radio architecture.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: STM32L152CBT6 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | STM32L152CBT6A | STM32L152C8T6 | STM32L151CBT6TR |
|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) |
| CPU Core | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 |
| Maximum Clock Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 128KB | 128KB | 128KB | 128KB |
| Data Width | 32 bit | 32 bit | 32 bit | 32 bit |
| Product Family | STM32L152 | STM32L152 | STM32L152 | STM32L151 |
| Special Features | Ultra-low-power MCU with LCD feature | Ultra-low-power MCU with LCD feature | Ultra-low-power MCU with LCD feature | Ultra-low-power MCU; LCD configuration requires verification |
主な差別化要因
- Exact STM32L152 family configuration (vs STM32L151CBT6TR)
- Closest documented same-family order code (vs STM32L152CBT6A)
- Same-package STM32L152 sourcing option (vs STM32L152C8T6)
設計ノート
Assign PCB connections from the manufacturer pin-description table rather than from the 48-LQFP outline alone. Confirm the locations of every supply and ground terminal, the exposed package requirements if applicable, oscillator inputs, reset, boot configuration, debug interfaces, and LCD signals. Place decoupling capacitors close to the associated device pins and route high-current or noisy inputs away from sensitive analog and communication nets.
The identified operating options are 2.5 V and 3.3 V, but the exact supply range and current behavior must be verified for the selected order code. Estimate the average and peak system current separately because sensor, transceiver, LCD, and regulator loads may dominate the MCU budget. If the design relies on sleep-mode current or rapid wake-up, include startup and active-processing energy in the battery-life calculation.
Keep oscillator and sensitive analog paths compact and follow the manufacturer layout guidance for decoupling and return paths. Separate switching-regulator routing and high-current actuator traces from LCD, communication, and measurement inputs. If the board combines analog acquisition with an LCD interface, use a clear ground strategy and controlled return paths to minimize noise coupling into sensitive signals.
Do not treat STM32L151 and STM32L152 order codes as interchangeable without checking the peripheral matrix and package pin table. Also confirm boot-option settings, firmware startup assumptions, low-power mode behavior, and the exact memory size. The package and flash density may match while USB, LCD, converter, communication, or qualification features differ, which can create hardware or firmware incompatibilities.
コンプライアンス情報
No definitive component-level compliance declaration was present in the cited product records. Verify RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status using the manufacturer documentation for the exact order code.