STM32L152CBT6 - 32MHz Cortex-M3 128KB MCU | STMicroelectronics
부품 번호: STM32L152CBT6 ✓ 활성STM32L152CBT6 개요
An ultra-low-power microcontroller is a semiconductor designed to complete embedded control tasks while consuming as little energy as practical. The STM32L1 family belongs to the broader hierarchy of embedded processors, microcontrollers, 32-bit ARM microcontrollers, and power-management-oriented embedded devices. This combination makes the STM32L152CBT6 suitable for systems that must monitor sensors, control actuators, and manage communications over long operating periods between maintenance cycles.
The device provides 128KB of flash memory for program storage and operates at up to 32MHz. Its 48-LQFP package exposes the GPIO, communication, debug, clock, and power functions required by a medium-complexity embedded design. The STM32L152CBT6 also belongs to the STM32L152 device family, which is identified in the product listing as an ultra-low-power Cortex-M3 MCU with LCD-oriented features. Confirm the complete peripheral and electrical details against the manufacturer datasheet before finalizing a design.
The principal architectural benefit is the combination of a 32-bit ARM Cortex-M3 processing core with low-power-oriented design in a conventional 7 x 7 mm LQFP footprint. This architecture is useful when firmware requires more general computation than an 8-bit MCU while the product must still operate from a constrained energy budget. The package offers enough pin count for external sensors, displays, communication transceivers, and general-purpose control signals.
Typical applications include low-power sensor nodes, industrial monitoring equipment, compact data-acquisition devices, battery-powered controllers, LCD-equipped human-interface equipment, and embedded systems requiring multiple peripheral functions around a single microcontroller. The target device can also support connected measurement systems where its flash capacity accommodates application firmware, configuration data, and protocol handling.
For PCB implementation, follow the manufacturer pin-description and land-pattern tables when assigning tracks and decoupling. Pay particular attention to supply-voltage limits, oscillator connections, reset behavior, boot configuration, and exposed ground requirements. Firmware changes should also account for the STM32L152 family option-byte and low-power-mode behavior rather than assuming the behavior of a general-purpose STM32 device.
This page combines package, memory, clock, lifecycle, sourcing, and replacement information with application guidance and engineering-oriented comparisons. It also identifies which substitute candidates have documented package and memory compatibility, helping designers distinguish a mechanically similar MCU from a part that can actually be considered for a drop-in redesign.
드롭인 대체품: STM32L152CBT6 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: STM32L152CBT6 (동일 폼 팩터 및 풋프린트) — 차이점: Architecture, Flash Memory, Operating Voltage, Package, Product Type.
STM32L152CBT6A
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
STM32L152C8T6
✅ 드롭인가격 문의
데이터시트 보기 →STM32L151CBT6TR
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
STM32L152CBT6 최대 정격 & 전기적 특성
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Series | STM32L1 |
| CPU Core | ARM Cortex-M3 |
| 최대 클록 주파수 | 32 MHz |
| Flash Memory | 128KB (128K x 8) |
| Data-Width | 32 bit |
| 패키지 | 48-pin LQFP (7 x 7 mm) |
| 실장 유형 | Surface mount |
| Architecture | ARM-based ultra-low-power MCU |
| LCD Feature | Yes |
| ADC Resolution | 12 bit |
| Operating Voltage | 2.5 V or 3.3 V |
STM32L152CBT6 48-pin lqfp (7 x 7 mm) 핀 구성 가이드
STM32L152CBT6(48-pin lqfp (7 x 7 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: STM32L152CBT6.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
STM32L152CBT6 적합 용도: 6 애플리케이션s: Battery-Powered Environmental Sensors, Industrial Process Monitoring, Compact Data-Acquisition Systems, LCD Human-Interface Equipment, Low-Power Control and Actuator Hubs, Connected Measurement and Telemetry.
Battery-Powered Environmental Sensors
The STM32L152CBT6 fits environmental monitoring nodes that combine periodic sensing, local filtering, and low-power sleep operation. Its 32-bit Cortex-M3 core and 128KB flash provide room for application firmware, calibration tables, and communication handlers, while the STM32L1 family is oriented toward energy-constrained embedded systems. The 48-LQFP package also exposes sufficient pins for sensor inputs, status indicators, and a low-power serial transceiver. Power-budget calculations should include sensor excitation, regulator loss, wake-up processing, and radio transmission rather than evaluating only the microcontroller.
추천
Industrial Process Monitoring
The STM32L152CBT6 is suitable for industrial monitoring modules that acquire sensor data, apply filtering, record operating events, and report status through a serial interface. Its 32MHz Cortex-M3 processing core can handle protocol framing and control logic, while 128KB of flash supports embedded application code. The 48-LQFP package provides a practical number of GPIO and peripheral connections for discrete sensors and interface circuits. In industrial equipment, follow the manufacturer grounding and decoupling guidance and validate the selected supply range against the exact operating conditions.
추천
Compact Data-Acquisition Systems
The STM32L152CBT6 can serve as the control MCU in a compact data-acquisition system that samples analog inputs, timestamps events, and transfers results to a host or network controller. The indexed listing identifies 12-bit conversion capability and a maximum clock frequency of 32MHz, while the 128KB flash capacity accommodates acquisition firmware and buffers. Use the manufacturer pin-description table to assign converter, reference, and communication signals, and account for analog input limits, acquisition timing, and memory requirements before selecting external support components.
추천
LCD Human-Interface Equipment
The STM32L152CBT6 is appropriate for compact LCD-equipped instruments because the STM32L152 family is identified as an LCD-oriented microcontroller with 128KB flash and a 48-LQFP package. It can coordinate display updates, keypad input, measurement control, and status indication within one embedded platform. The 32MHz Cortex-M3 core provides more headroom for graphical formatting than a basic 8-bit controller. Actual segment count, LCD drive capability, pin assignments, and timing requirements must be checked in the manufacturer documentation for the specific display configuration.
추천
Low-Power Control and Actuator Hubs
The STM32L152CBT6 is well suited to a low-power actuator hub that reads local commands, controls relays or valves, monitors feedback, and sleeps during inactive periods. Its 128KB flash supports control logic and configuration, while the 48-LQFP package offers enough connections for multiple digital I/O and communication functions. The key engineering trade-off is that response latency and average energy use depend on the selected wake-up sources and low-power mode. Validate those behaviors against the manufacturer reference manual rather than inferring them from the CPU frequency.
추천
Connected Measurement and Telemetry
The STM32L152CBT6 can serve as the low-power measurement engine in connected telemetry equipment that packages sensor readings and transmits them through a UART, SPI, or other supported interface. Its 128KB flash provides substantial firmware space for drivers, protocol stacks, and calibration, while the 32MHz Cortex-M3 core supports responsive foreground processing. The 48-LQFP package simplifies access to multiple serial and digital signals. Select external transceivers according to the link voltage, speed, isolation, and power requirements, and confirm the MCU's available peripheral pins for the final radio architecture.
추천
추천 제품 요약
엔지니어링 참조 데이터: STM32L152CBT6 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | STM32L152CBT6A | STM32L152C8T6 | STM32L151CBT6TR |
|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) |
| CPU Core | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 |
| Maximum Clock Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 128KB | 128KB | 128KB | 128KB |
| Data Width | 32 bit | 32 bit | 32 bit | 32 bit |
| Product Family | STM32L152 | STM32L152 | STM32L152 | STM32L151 |
| Special Features | Ultra-low-power MCU with LCD feature | Ultra-low-power MCU with LCD feature | Ultra-low-power MCU with LCD feature | Ultra-low-power MCU; LCD configuration requires verification |
주요 차별점
- Exact STM32L152 family configuration (vs STM32L151CBT6TR)
- Closest documented same-family order code (vs STM32L152CBT6A)
- Same-package STM32L152 sourcing option (vs STM32L152C8T6)
설계 노트
Assign PCB connections from the manufacturer pin-description table rather than from the 48-LQFP outline alone. Confirm the locations of every supply and ground terminal, the exposed package requirements if applicable, oscillator inputs, reset, boot configuration, debug interfaces, and LCD signals. Place decoupling capacitors close to the associated device pins and route high-current or noisy inputs away from sensitive analog and communication nets.
The identified operating options are 2.5 V and 3.3 V, but the exact supply range and current behavior must be verified for the selected order code. Estimate the average and peak system current separately because sensor, transceiver, LCD, and regulator loads may dominate the MCU budget. If the design relies on sleep-mode current or rapid wake-up, include startup and active-processing energy in the battery-life calculation.
Keep oscillator and sensitive analog paths compact and follow the manufacturer layout guidance for decoupling and return paths. Separate switching-regulator routing and high-current actuator traces from LCD, communication, and measurement inputs. If the board combines analog acquisition with an LCD interface, use a clear ground strategy and controlled return paths to minimize noise coupling into sensitive signals.
Do not treat STM32L151 and STM32L152 order codes as interchangeable without checking the peripheral matrix and package pin table. Also confirm boot-option settings, firmware startup assumptions, low-power mode behavior, and the exact memory size. The package and flash density may match while USB, LCD, converter, communication, or qualification features differ, which can create hardware or firmware incompatibilities.
규정 준수 정보
No definitive component-level compliance declaration was present in the cited product records. Verify RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status using the manufacturer documentation for the exact order code.