STM32L152CBT6 - 32MHz Cortex-M3 128KB MCU | STMicroelectronics
料号: STM32L152CBT6 ✓ 量产中STM32L152CBT6 概述
An ultra-low-power microcontroller is a semiconductor designed to complete embedded control tasks while consuming as little energy as practical. The STM32L1 family belongs to the broader hierarchy of embedded processors, microcontrollers, 32-bit ARM microcontrollers, and power-management-oriented embedded devices. This combination makes the STM32L152CBT6 suitable for systems that must monitor sensors, control actuators, and manage communications over long operating periods between maintenance cycles.
The device provides 128KB of flash memory for program storage and operates at up to 32MHz. Its 48-LQFP package exposes the GPIO, communication, debug, clock, and power functions required by a medium-complexity embedded design. The STM32L152CBT6 also belongs to the STM32L152 device family, which is identified in the product listing as an ultra-low-power Cortex-M3 MCU with LCD-oriented features. Confirm the complete peripheral and electrical details against the manufacturer datasheet before finalizing a design.
The principal architectural benefit is the combination of a 32-bit ARM Cortex-M3 processing core with low-power-oriented design in a conventional 7 x 7 mm LQFP footprint. This architecture is useful when firmware requires more general computation than an 8-bit MCU while the product must still operate from a constrained energy budget. The package offers enough pin count for external sensors, displays, communication transceivers, and general-purpose control signals.
Typical applications include low-power sensor nodes, industrial monitoring equipment, compact data-acquisition devices, battery-powered controllers, LCD-equipped human-interface equipment, and embedded systems requiring multiple peripheral functions around a single microcontroller. The target device can also support connected measurement systems where its flash capacity accommodates application firmware, configuration data, and protocol handling.
For PCB implementation, follow the manufacturer pin-description and land-pattern tables when assigning tracks and decoupling. Pay particular attention to supply-voltage limits, oscillator connections, reset behavior, boot configuration, and exposed ground requirements. Firmware changes should also account for the STM32L152 family option-byte and low-power-mode behavior rather than assuming the behavior of a general-purpose STM32 device.
This page combines package, memory, clock, lifecycle, sourcing, and replacement information with application guidance and engineering-oriented comparisons. It also identifies which substitute candidates have documented package and memory compatibility, helping designers distinguish a mechanically similar MCU from a part that can actually be considered for a drop-in redesign.
直接替换替代料: STM32L152CBT6 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: STM32L152CBT6 (相同外形与封装尺寸) ——差异在于 Architecture, Flash Memory, Operating Voltage, Package, Product Type.
STM32L152CBT6A
✅ 直接替换📋 参考替代料(不在目录中)
STM32L152C8T6
✅ 直接替换联系询价
查看数据手册 →STM32L151CBT6TR
✅ 直接替换📋 参考替代料(不在目录中)
STM32L152CBT6 最大额定值与电气特性
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Series | STM32L1 |
| CPU Core | ARM Cortex-M3 |
| 最大时钟频率 | 32 MHz |
| Flash Memory | 128KB (128K x 8) |
| Data-Width | 32 bit |
| 封装 | 48-pin LQFP (7 x 7 mm) |
| 安装类型 | Surface mount |
| Architecture | ARM-based ultra-low-power MCU |
| LCD Feature | Yes |
| ADC Resolution | 12 bit |
| Operating Voltage | 2.5 V or 3.3 V |
STM32L152CBT6 48-pin lqfp (7 x 7 mm) 引脚配置指南
STM32L152CBT6(48-pin lqfp (7 x 7 mm) 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: STM32L152CBT6.
请参阅 数据手册 以查看完整引脚配置。
典型应用
STM32L152CBT6 适用于 6 应用s: Battery-Powered Environmental Sensors, Industrial Process Monitoring, Compact Data-Acquisition Systems, LCD Human-Interface Equipment, Low-Power Control and Actuator Hubs, Connected Measurement and Telemetry.
Battery-Powered Environmental Sensors
The STM32L152CBT6 fits environmental monitoring nodes that combine periodic sensing, local filtering, and low-power sleep operation. Its 32-bit Cortex-M3 core and 128KB flash provide room for application firmware, calibration tables, and communication handlers, while the STM32L1 family is oriented toward energy-constrained embedded systems. The 48-LQFP package also exposes sufficient pins for sensor inputs, status indicators, and a low-power serial transceiver. Power-budget calculations should include sensor excitation, regulator loss, wake-up processing, and radio transmission rather than evaluating only the microcontroller.
推荐
Industrial Process Monitoring
The STM32L152CBT6 is suitable for industrial monitoring modules that acquire sensor data, apply filtering, record operating events, and report status through a serial interface. Its 32MHz Cortex-M3 processing core can handle protocol framing and control logic, while 128KB of flash supports embedded application code. The 48-LQFP package provides a practical number of GPIO and peripheral connections for discrete sensors and interface circuits. In industrial equipment, follow the manufacturer grounding and decoupling guidance and validate the selected supply range against the exact operating conditions.
推荐
Compact Data-Acquisition Systems
The STM32L152CBT6 can serve as the control MCU in a compact data-acquisition system that samples analog inputs, timestamps events, and transfers results to a host or network controller. The indexed listing identifies 12-bit conversion capability and a maximum clock frequency of 32MHz, while the 128KB flash capacity accommodates acquisition firmware and buffers. Use the manufacturer pin-description table to assign converter, reference, and communication signals, and account for analog input limits, acquisition timing, and memory requirements before selecting external support components.
推荐
LCD Human-Interface Equipment
The STM32L152CBT6 is appropriate for compact LCD-equipped instruments because the STM32L152 family is identified as an LCD-oriented microcontroller with 128KB flash and a 48-LQFP package. It can coordinate display updates, keypad input, measurement control, and status indication within one embedded platform. The 32MHz Cortex-M3 core provides more headroom for graphical formatting than a basic 8-bit controller. Actual segment count, LCD drive capability, pin assignments, and timing requirements must be checked in the manufacturer documentation for the specific display configuration.
推荐
Low-Power Control and Actuator Hubs
The STM32L152CBT6 is well suited to a low-power actuator hub that reads local commands, controls relays or valves, monitors feedback, and sleeps during inactive periods. Its 128KB flash supports control logic and configuration, while the 48-LQFP package offers enough connections for multiple digital I/O and communication functions. The key engineering trade-off is that response latency and average energy use depend on the selected wake-up sources and low-power mode. Validate those behaviors against the manufacturer reference manual rather than inferring them from the CPU frequency.
推荐
Connected Measurement and Telemetry
The STM32L152CBT6 can serve as the low-power measurement engine in connected telemetry equipment that packages sensor readings and transmits them through a UART, SPI, or other supported interface. Its 128KB flash provides substantial firmware space for drivers, protocol stacks, and calibration, while the 32MHz Cortex-M3 core supports responsive foreground processing. The 48-LQFP package simplifies access to multiple serial and digital signals. Select external transceivers according to the link voltage, speed, isolation, and power requirements, and confirm the MCU's available peripheral pins for the final radio architecture.
推荐
推荐产品汇总
工程参考数据: STM32L152CBT6 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | STM32L152CBT6A | STM32L152C8T6 | STM32L151CBT6TR |
|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) |
| CPU Core | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 |
| Maximum Clock Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 128KB | 128KB | 128KB | 128KB |
| Data Width | 32 bit | 32 bit | 32 bit | 32 bit |
| Product Family | STM32L152 | STM32L152 | STM32L152 | STM32L151 |
| Special Features | Ultra-low-power MCU with LCD feature | Ultra-low-power MCU with LCD feature | Ultra-low-power MCU with LCD feature | Ultra-low-power MCU; LCD configuration requires verification |
关键差异点
- Exact STM32L152 family configuration (对比 STM32L151CBT6TR)
- Closest documented same-family order code (对比 STM32L152CBT6A)
- Same-package STM32L152 sourcing option (对比 STM32L152C8T6)
设计说明
Assign PCB connections from the manufacturer pin-description table rather than from the 48-LQFP outline alone. Confirm the locations of every supply and ground terminal, the exposed package requirements if applicable, oscillator inputs, reset, boot configuration, debug interfaces, and LCD signals. Place decoupling capacitors close to the associated device pins and route high-current or noisy inputs away from sensitive analog and communication nets.
The identified operating options are 2.5 V and 3.3 V, but the exact supply range and current behavior must be verified for the selected order code. Estimate the average and peak system current separately because sensor, transceiver, LCD, and regulator loads may dominate the MCU budget. If the design relies on sleep-mode current or rapid wake-up, include startup and active-processing energy in the battery-life calculation.
Keep oscillator and sensitive analog paths compact and follow the manufacturer layout guidance for decoupling and return paths. Separate switching-regulator routing and high-current actuator traces from LCD, communication, and measurement inputs. If the board combines analog acquisition with an LCD interface, use a clear ground strategy and controlled return paths to minimize noise coupling into sensitive signals.
Do not treat STM32L151 and STM32L152 order codes as interchangeable without checking the peripheral matrix and package pin table. Also confirm boot-option settings, firmware startup assumptions, low-power mode behavior, and the exact memory size. The package and flash density may match while USB, LCD, converter, communication, or qualification features differ, which can create hardware or firmware incompatibilities.
合规信息
No definitive component-level compliance declaration was present in the cited product records. Verify RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status using the manufacturer documentation for the exact order code.