SY89113UMG - 1:12 LVDS Fanout Buffer | Microchip Technology
部品番号: SY89113UMG ✓ 生産中SY89113UMG 概要
A clock fanout buffer is a clock-and-timing integrated circuit that replicates a reference signal to multiple destinations. Its position in the hierarchy is clock buffer, then clock buffer or line driver, then clock-and-timing IC, and finally semiconductor. By separating source selection from distribution, the SY89113UMG can reduce clock-tree loading, support redundant clock sources, and provide consistent edge-driven signals across a complex system.
Principal features include a maximum operating frequency of 1 GHz, a 2:1 input multiplexer, twelve LVDS outputs, internal termination, and support for CML, CMOS, HSTL, LVPECL, LVDS, and TTL input styles. The 44-MLF package is identified as a 44-VFQFN with an exposed pad. This combination makes the device applicable to precision telecom, enterprise-server, and other high-speed clock-distribution systems.
The architecture accepts two clock inputs and selects one for distribution to twelve LVDS outputs. Internal termination is useful when the receiving network requires controlled source impedance, while the fanout function isolates the selected source from downstream clock-tree loading. The exposed pad provides a direct thermal path to the PCB, but its effectiveness depends on the implemented copper area, via pattern, and ambient conditions.
Typical uses include telecom backplane clock distribution, enterprise-server clock trees, network-interface clocking, and data-conversion systems requiring twelve outputs. In these applications, the 1 GHz operating limit, input-format flexibility, and twelve-output architecture can simplify topology planning while maintaining deterministic clock routing across multiple loads.
Designers should preserve controlled-impedance routing for LVDS pairs, connect the exposed pad to a thermal and ground plane with an appropriate via array, and verify input termination, output mapping, and mux polarity in the manufacturer pin-description table. Differential trace geometry and return-path continuity are especially important because discontinuities can increase edge jitter and radiated emissions.
This page combines the principal operating characteristics, application-specific engineering guidance, a parameter comparison, and the qualified cross-reference identified for the SY89113UMG. These resources help engineers evaluate clock-tree architecture, PCB implementation, and device interchangeability before committing a design to production.
ドロップイン代替品: SY89113UMG — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
SY89113UMG-TR
✅ ドロップイン📋 参考代替品(カタログ未掲載)
SY89113UMG 仕様
| Product Type | Clock fanout buffer and multiplexer |
| Maximum Frequency | 1 GHz |
| Fanout Ratio | 1:12 |
| Input Multiplexer Ratio | 2:1 |
| Output Count | 12 outputs |
| Output Logic | LVDS |
| Input Logic | CML, CMOS, HSTL, LVDS, LVPECL, and TTL |
| Internal Termination | Internal termination |
| Nominal Supply | 2.5 V |
| パッケージ | 44-VFQFN exposed-pad, 44-MLF |
| 実装タイプ | Surface mount |
SY89113UMG 44-vfqfn exposed-pad, 44-mlf ピン配置ガイド
SY89113UMG (44-vfqfn exposed-pad, 44-mlf パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: SY89113UMG.
詳細は データシート をご参照ください。
主な用途
SY89113UMG の用途: 3 件s: 組込みシステム, IoTデバイス, 産業制御.
組込みシステム
SY89113UMGを使用した組込みアプリケーションのコア処理。
IoTデバイス
SY89113UMGを搭載したスマートコネクテッドデバイス。
産業制御
SY89113UMGを使用した自動化および制御システム。
エンジニアリング参考データ: SY89113UMG — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | SY89113UMG-TR |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 44-VFQFN exposed-pad, 44-MLF | 44-VFQFN exposed-pad, 44-MLF - same |
| Maximum Frequency | 1 GHz | 1 GHz |
| Fanout Ratio | 1:12 | 1:12 |
| Input Multiplexer Ratio | 2:1 | 2:1 |
| Output Count | 12 outputs | 12 outputs |
| Output Logic | LVDS | LVDS |
| Internal Termination | Yes | Yes |
| Orderable Suffix | SY89113UMG | SY89113UMG-TR packaging format |
主な差別化要因
- Twelve-output clock distribution with source multiplexing (vs SY89113UMG-TR)
- Broad source-format compatibility (vs SY89113UMG-TR)
- Integrated source termination (vs SY89113UMG-TR)
設計ノート
Route all twelve LVDS output channels as controlled-impedance differential pairs and keep the traces closely coupled. Maintain a continuous reference plane beneath each pair, avoid plane splits, and follow the manufacturer’s recommended spacing and trace geometry. Mismatched pair lengths or an interrupted return path can increase edge distortion, jitter, and radiated emissions even when the clock frequency is within specification.
The 44-VFQFN exposed pad is the primary heat-transfer path from the device to the PCB. Place the exposed pad over a solid ground or thermal plane, connect it with multiple vias where the manufacturer pattern permits, and avoid long narrow copper necks. Validate the final assembly temperature under worst-case clock activity, ambient temperature, airflow, and output-loading conditions.
Do not assume that identical logic labels guarantee interchangeable source interfaces. Before connecting a CML, CMOS, HSTL, LVPECL, LVDS, or TTL source, verify amplitude, common-mode voltage, edge rate, termination, and input polarity against the Microchip Technology datasheet. Also confirm which of the two inputs is selected by each control state and whether internal termination should remain enabled or be supplemented externally.
コンプライアンス情報
Use the current Microchip Technology product documentation and material declarations for environmental, material, and automotive qualification decisions.