SY89113UMG - 1:12 LVDS Fanout Buffer | Microchip Technology
料号: SY89113UMG ✓ 量产中SY89113UMG 概述
A clock fanout buffer is a clock-and-timing integrated circuit that replicates a reference signal to multiple destinations. Its position in the hierarchy is clock buffer, then clock buffer or line driver, then clock-and-timing IC, and finally semiconductor. By separating source selection from distribution, the SY89113UMG can reduce clock-tree loading, support redundant clock sources, and provide consistent edge-driven signals across a complex system.
Principal features include a maximum operating frequency of 1 GHz, a 2:1 input multiplexer, twelve LVDS outputs, internal termination, and support for CML, CMOS, HSTL, LVPECL, LVDS, and TTL input styles. The 44-MLF package is identified as a 44-VFQFN with an exposed pad. This combination makes the device applicable to precision telecom, enterprise-server, and other high-speed clock-distribution systems.
The architecture accepts two clock inputs and selects one for distribution to twelve LVDS outputs. Internal termination is useful when the receiving network requires controlled source impedance, while the fanout function isolates the selected source from downstream clock-tree loading. The exposed pad provides a direct thermal path to the PCB, but its effectiveness depends on the implemented copper area, via pattern, and ambient conditions.
Typical uses include telecom backplane clock distribution, enterprise-server clock trees, network-interface clocking, and data-conversion systems requiring twelve outputs. In these applications, the 1 GHz operating limit, input-format flexibility, and twelve-output architecture can simplify topology planning while maintaining deterministic clock routing across multiple loads.
Designers should preserve controlled-impedance routing for LVDS pairs, connect the exposed pad to a thermal and ground plane with an appropriate via array, and verify input termination, output mapping, and mux polarity in the manufacturer pin-description table. Differential trace geometry and return-path continuity are especially important because discontinuities can increase edge jitter and radiated emissions.
This page combines the principal operating characteristics, application-specific engineering guidance, a parameter comparison, and the qualified cross-reference identified for the SY89113UMG. These resources help engineers evaluate clock-tree architecture, PCB implementation, and device interchangeability before committing a design to production.
直接替换替代料: SY89113UMG ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
SY89113UMG-TR
✅ 直接替换📋 参考替代料(不在目录中)
SY89113UMG 规格参数
| Product Type | Clock fanout buffer and multiplexer |
| Maximum Frequency | 1 GHz |
| Fanout Ratio | 1:12 |
| Input Multiplexer Ratio | 2:1 |
| Output Count | 12 outputs |
| Output Logic | LVDS |
| Input Logic | CML, CMOS, HSTL, LVDS, LVPECL, and TTL |
| Internal Termination | Internal termination |
| Nominal Supply | 2.5 V |
| 封装 | 44-VFQFN exposed-pad, 44-MLF |
| 安装类型 | Surface mount |
SY89113UMG 44-vfqfn exposed-pad, 44-mlf 引脚配置指南
SY89113UMG(44-vfqfn exposed-pad, 44-mlf 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: SY89113UMG.
请参阅 数据手册 以查看完整引脚配置。
典型应用
SY89113UMG 适用于 3 应用s: 嵌入式系统, 物联网设备, 工业控制.
嵌入式系统
使用 SY89113UMG 在嵌入式应用中进行核心处理。
物联网设备
由 SY89113UMG 驱动的智能联网设备。
工业控制
使用 SY89113UMG 的自动化和控制系统。
工程参考数据: SY89113UMG ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | SY89113UMG-TR |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 44-VFQFN exposed-pad, 44-MLF | 44-VFQFN exposed-pad, 44-MLF - same |
| Maximum Frequency | 1 GHz | 1 GHz |
| Fanout Ratio | 1:12 | 1:12 |
| Input Multiplexer Ratio | 2:1 | 2:1 |
| Output Count | 12 outputs | 12 outputs |
| Output Logic | LVDS | LVDS |
| Internal Termination | Yes | Yes |
| Orderable Suffix | SY89113UMG | SY89113UMG-TR packaging format |
关键差异点
- Twelve-output clock distribution with source multiplexing (对比 SY89113UMG-TR)
- Broad source-format compatibility (对比 SY89113UMG-TR)
- Integrated source termination (对比 SY89113UMG-TR)
设计说明
Route all twelve LVDS output channels as controlled-impedance differential pairs and keep the traces closely coupled. Maintain a continuous reference plane beneath each pair, avoid plane splits, and follow the manufacturer’s recommended spacing and trace geometry. Mismatched pair lengths or an interrupted return path can increase edge distortion, jitter, and radiated emissions even when the clock frequency is within specification.
The 44-VFQFN exposed pad is the primary heat-transfer path from the device to the PCB. Place the exposed pad over a solid ground or thermal plane, connect it with multiple vias where the manufacturer pattern permits, and avoid long narrow copper necks. Validate the final assembly temperature under worst-case clock activity, ambient temperature, airflow, and output-loading conditions.
Do not assume that identical logic labels guarantee interchangeable source interfaces. Before connecting a CML, CMOS, HSTL, LVPECL, LVDS, or TTL source, verify amplitude, common-mode voltage, edge rate, termination, and input polarity against the Microchip Technology datasheet. Also confirm which of the two inputs is selected by each control state and whether internal termination should remain enabled or be supplemented externally.
合规信息
Use the current Microchip Technology product documentation and material declarations for environmental, material, and automotive qualification decisions.