SY89113UMG - 1:12 LVDS Fanout Buffer | Microchip Technology
MPN: SY89113UMG ✓ AktifSY89113UMG Ringkasan
A clock fanout buffer is a clock-and-timing integrated circuit that replicates a reference signal to multiple destinations. Its position in the hierarchy is clock buffer, then clock buffer or line driver, then clock-and-timing IC, and finally semiconductor. By separating source selection from distribution, the SY89113UMG can reduce clock-tree loading, support redundant clock sources, and provide consistent edge-driven signals across a complex system.
Principal features include a maximum operating frequency of 1 GHz, a 2:1 input multiplexer, twelve LVDS outputs, internal termination, and support for CML, CMOS, HSTL, LVPECL, LVDS, and TTL input styles. The 44-MLF package is identified as a 44-VFQFN with an exposed pad. This combination makes the device applicable to precision telecom, enterprise-server, and other high-speed clock-distribution systems.
The architecture accepts two clock inputs and selects one for distribution to twelve LVDS outputs. Internal termination is useful when the receiving network requires controlled source impedance, while the fanout function isolates the selected source from downstream clock-tree loading. The exposed pad provides a direct thermal path to the PCB, but its effectiveness depends on the implemented copper area, via pattern, and ambient conditions.
Typical uses include telecom backplane clock distribution, enterprise-server clock trees, network-interface clocking, and data-conversion systems requiring twelve outputs. In these applications, the 1 GHz operating limit, input-format flexibility, and twelve-output architecture can simplify topology planning while maintaining deterministic clock routing across multiple loads.
Designers should preserve controlled-impedance routing for LVDS pairs, connect the exposed pad to a thermal and ground plane with an appropriate via array, and verify input termination, output mapping, and mux polarity in the manufacturer pin-description table. Differential trace geometry and return-path continuity are especially important because discontinuities can increase edge jitter and radiated emissions.
This page combines the principal operating characteristics, application-specific engineering guidance, a parameter comparison, and the qualified cross-reference identified for the SY89113UMG. These resources help engineers evaluate clock-tree architecture, PCB implementation, and device interchangeability before committing a design to production.
Pilihan pengganti yang segera untuk SY89113UMG — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
SY89113UMG-TR
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
SY89113UMG Spesifikasi
| Product Type | Clock fanout buffer and multiplexer |
| Maximum Frequency | 1 GHz |
| Fanout Ratio | 1:12 |
| Input Multiplexer Ratio | 2:1 |
| Output Count | 12 outputs |
| Output Logic | LVDS |
| Input Logic | CML, CMOS, HSTL, LVDS, LVPECL, and TTL |
| Internal Termination | Internal termination |
| Nominal Supply | 2.5 V |
| Kemasan | 44-VFQFN exposed-pad, 44-MLF |
| Jenis Pemasangan | Surface mount |
Panduan Konfigurasi Pin SY89113UMG 44-vfqfn exposed-pad, 44-mlf
Konfigurasi pin untuk SY89113UMG (44-vfqfn exposed-pad, 44-mlf pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.
Tiada data garisan pin yang diperoleh untuk SY89113UMG.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
SY89113UMG patut untuk 3 aplikasis: Sistem Ter嵌入式, Peranti IoT, Kawalan Industri.
Sistem Ter嵌入式
Pemrosesan utama dalam aplikasi ter嵌入式 menggunakan SY89113UMG.
Peranti IoT
Peranti bersambung pintar yang dipower oleh SY89113UMG.
Kawalan Industri
Sistem pengawalan dan automatik menggunakan SY89113UMG.
Data referensi kejuruteraan untuk SY89113UMG — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | SY89113UMG-TR |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 44-VFQFN exposed-pad, 44-MLF | 44-VFQFN exposed-pad, 44-MLF - same |
| Maximum Frequency | 1 GHz | 1 GHz |
| Fanout Ratio | 1:12 | 1:12 |
| Input Multiplexer Ratio | 2:1 | 2:1 |
| Output Count | 12 outputs | 12 outputs |
| Output Logic | LVDS | LVDS |
| Internal Termination | Yes | Yes |
| Orderable Suffix | SY89113UMG | SY89113UMG-TR packaging format |
Penyeberangsung Jelas
- Twelve-output clock distribution with source multiplexing (vsSY89113UMG-TR)
- Broad source-format compatibility (vsSY89113UMG-TR)
- Integrated source termination (vsSY89113UMG-TR)
Catatan Desain
Route all twelve LVDS output channels as controlled-impedance differential pairs and keep the traces closely coupled. Maintain a continuous reference plane beneath each pair, avoid plane splits, and follow the manufacturer’s recommended spacing and trace geometry. Mismatched pair lengths or an interrupted return path can increase edge distortion, jitter, and radiated emissions even when the clock frequency is within specification.
The 44-VFQFN exposed pad is the primary heat-transfer path from the device to the PCB. Place the exposed pad over a solid ground or thermal plane, connect it with multiple vias where the manufacturer pattern permits, and avoid long narrow copper necks. Validate the final assembly temperature under worst-case clock activity, ambient temperature, airflow, and output-loading conditions.
Do not assume that identical logic labels guarantee interchangeable source interfaces. Before connecting a CML, CMOS, HSTL, LVPECL, LVDS, or TTL source, verify amplitude, common-mode voltage, edge rate, termination, and input polarity against the Microchip Technology datasheet. Also confirm which of the two inputs is selected by each control state and whether internal termination should remain enabled or be supplemented externally.
Maklumat Kesediaan
Use the current Microchip Technology product documentation and material declarations for environmental, material, and automotive qualification decisions.