TAS5754MDCA - 40W Stereo Class-D Amplifier | Texas Instruments
部品番号: TAS5754MDCA ✓ 生産中TAS5754MDCA 概要
A Class-D audio amplifier is a switching power amplifier whose output stage drives loudspeakers with a high-efficiency PWM signal. Within the semiconductor hierarchy, TAS5754MDCA is an audio amplifier IC and belongs to the broader amplifier and power-management semiconductor categories. Its digital-input architecture simplifies source routing and allows a system controller to select and process audio signals before the power stage performs high-current speaker drive.
The headline capabilities are 40 W per channel in stereo mode, 61 W into a mono load, operation from 4.5 V to 26.4 V, digital audio input, and a closed-loop Class-D output stage. These characteristics place the amplifier in mid-power audio applications where efficient conversion of a DC supply into low-distortion speaker drive is important. The integrated exposed-pad package is designed for board-level heat dissipation through its thermal pad and PCB copper.
TAS5754MDCA integrates an audio processor with the Class-D power stage. The digital interface reduces dependence on analog source paths, while the closed-loop architecture addresses output distortion through feedback around the power stage. Configuration and control are handled through the device's digital control interface, allowing system-level management of the amplifier when the surrounding circuit is designed according to the manufacturer reference design.
Typical applications include powered speakers, sound bars, television or monitor audio, compact home-theater systems, active loudspeakers, and other consumer or professional audio products. A 4.5 V minimum supply supports portable and lower-voltage powered systems, while the 26.4 V maximum permits higher-voltage class-D amplifier rails. The 40 W stereo rating is especially relevant to multimedia speakers, while the 61 W mono capability supports higher-power single-channel operation.
Design the power supply for the selected output mode rather than assuming the nominal speaker rating applies continuously. Place the exposed pad on a thermal-via and copper-pad pattern that satisfies the manufacturer layout guidance, keep high-current output routing compact, and follow the recommended input, power, ground, and filtering connections. The digital interface also requires a compatible host or audio processor and correctly configured communication routing.
This product page combines the manufacturer specifications, package details, functional use cases, engineering design guidance, and a clear replacement-screening framework. It is intended to help engineers determine whether the TAS5754MDCA provides the required channel configuration, output power, supply range, digital interface, and package for a new audio-amplifier design.
ドロップイン代替品: TAS5754MDCA — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
TAS5754MDCAR
✅ ドロップイン📋 参考代替品(カタログ未掲載)
TAS5753MDDCAR
✅ ドロップイン📋 参考代替品(カタログ未掲載)
TAS5751MDCAR
✅ ドロップイン📋 参考代替品(カタログ未掲載)
TAS5754MDCA 最大定格&電気的特性
| Stereo Output Power | 40 W |
| Mono Output Power | 61 W |
| Supply Voltage Range | 4.5 V to 26.4 V |
| Amplifier Type | Closed-loop Class-D audio amplifier |
| Input Type | Digital input |
| Channel Configuration | 1-channel mono or 2-channel stereo |
| Integrated Audio Processor | Yes |
| パッケージ | 48-pin HTSSOP |
| Package Type | HTSSOP with exposed pad |
| Number of Terminals | 48 |
| Terminal Form | Gull wing |
| Package Shape | Rectangular |
TAS5754MDCA rectangular ピン配置ガイド
TAS5754MDCA (rectangular パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: TAS5754MDCA.
詳細は データシート をご参照ください。
主な用途
TAS5754MDCA の用途: 6 件s: Powered Stereo Speakers, Television and Monitor Audio, Sound Bars, Home Theater Amplification, Active Bookshelf Speakers, Portable and Embedded Audio Systems.
Powered Stereo Speakers
The TAS5754MDCA fits powered stereo speakers because it provides 40 W per channel and accepts digital audio rather than requiring a separate line-level input stage. A digital audio receiver or processor can feed the amplifier while the integrated audio processor supports system configuration. This arrangement reduces signal-conversion stages in connected speakers, although the final thermal design must account for both output power and the 48-pin HTSSOP exposed pad.
Television and Monitor Audio
Television and monitor systems can use the TAS5754MDCA to drive left and right speakers from a digital audio source. Its 40 W stereo capability is suitable for compact multimedia speakers, while the 4.5 V to 26.4 V operating range permits integration with different system rails. Digital control also enables coordinated mute or configuration functions when the host processor supports the required interface.
Sound Bars
A sound bar can use the TAS5754MDCA for compact stereo amplification of left, center, or right channels when 40 W per channel is sufficient. The digital input helps preserve the digital signal path from decoding through to the power stage, while the integrated processor reduces the need for separate source routing. Designers should account for enclosure heat dissipation and maintain copper around the exposed thermal pad.
Home Theater Amplification
The TAS5754MDCA can provide high-efficiency Class-D drive in an active home-theater speaker or compact multi-channel amplifier. Its 40 W stereo rating supports common bookshelf and multimedia speaker power levels, while the 61 W mono specification can serve single-channel subwoofer or dedicated-channel designs where the load and test conditions meet the device requirements. Digital routing enables centralized source selection and volume control.
Active Bookshelf Speakers
Active bookshelf speakers benefit from the TAS5754MDCA when a digital source and integrated amplification are desired in a compact enclosure. The closed-loop Class-D topology supports efficient speaker drive, and the 48-pin HTSSOP package provides a high pin count for control, power, and signal connections. Mechanical engineers should evaluate acoustic enclosure heating and orient the PCB to transfer heat from the exposed pad into a balanced copper area.
Portable and Embedded Audio Systems
The 4.5 V minimum supply of the TAS5754MDCA makes it relevant to portable or embedded powered-audio products that cannot rely on a high-voltage class-D rail. Digital source integration can reduce external analog circuitry, while 40 W stereo capability supports louder enclosures than a headphone-only device. Battery and thermal design must be evaluated together because higher output power increases supply demand and board heating.
エンジニアリング参考データ: TAS5754MDCA — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 |
|---|---|
| Brand | Texas Instruments |
| Package | 48-pin HTSSOP with exposed pad |
| Stereo Output Power | 40 W |
| Mono Output Power | 61 W |
| Supply Voltage Range | 4.5 V to 26.4 V |
| Input Architecture | Digital input |
| Output Stage | Closed-loop Class-D |
| Integrated Audio Processor | Yes |
| Channel Modes | Mono or stereo |
主な差別化要因
- High stereo output in a digital-input Class-D amplifier (vs TAS5754MDC)
- Integrated digital audio processing (vs Analog-input Class-D amplifier)
- Closed-loop Class-D output architecture (vs Open-loop Class-D amplifier)
- Broad supply range for powered audio (vs Low-voltage portable Class-D amplifier)
設計ノート
Assign a dedicated exposed-pad copper area and thermal vias according to the Texas Instruments package drawing and recommended land pattern. Estimated: the power dissipated by the amplifier equals output power divided by class-D efficiency, less the power delivered to the speaker. With efficiency E, Pdevice is approximately Pout divided by E; use the actual rail and load conditions rather than the nominal output rating alone. Validate the final junction temperature in the intended enclosure.
Use the manufacturer reference layout for the 48-pin HTSSOP and place decoupling capacitors close to their associated supply and ground pins. Keep the exposed-pad vias within the recommended pad geometry without violating manufacturing rules for tenting or soldering. Route the digital interface away from output and switching-current paths, and provide a low-impedance ground return for the power stage. Confirm all pin names against the manufacturer pin table before releasing artwork.
Size the supply for the selected stereo or mono mode, amplifier efficiency, and control-circuit demand. The listed 40 W stereo and 61 W mono ratings are maximum application cases with defined test conditions, not a guarantee that every supply, speaker impedance, board, and enclosure combination can sustain them. Add local bulk and high-frequency decoupling, keep converter loops away from sensitive control nets, and verify startup, mute, and brownout behavior across the full 4.5 V to 26.4 V input range.
Treat the digital audio and control interface as a routed digital signal, not as an analog audio trace. Use continuous reference planes where practical, avoid stubs, observe the interface voltage and timing requirements, and confirm that the host driver matches the TAS5754MDCA configuration protocol. Place protection or filtering components where they will not distort the intended digital signal. This prevents software, edge-rate, and routing issues from being mistaken for speaker-amplifier failures.
コンプライアンス情報
The current material and environmental declarations for the exact TAS5754MDCA ordering code must be confirmed from the Texas Instruments product documentation. AEC-Q100 is not applicable because the product is an audio amplifier rather than an automotive-qualified device.