Texas Instruments

TAS5754MDCA - 40W Stereo Class-D Amplifier | Texas Instruments

부품 번호: TAS5754MDCA ✓ 활성
4.5 V to 26.4 V Vdss 48-pin HTSSOP Package
MOQ: 1 |

TAS5754MDCA 개요

Texas Instruments TAS5754MDCA is a digital-input, closed-loop Class-D audio amplifier rated for 40 W stereo output or 61 W mono output, with a 4.5 V to 26.4 V supply range and a 48-pin HTSSOP package with exposed pad. The device accepts digital audio data rather than conventional analog line inputs, making it suitable for digitally controlled audio systems.

A Class-D audio amplifier is a switching power amplifier whose output stage drives loudspeakers with a high-efficiency PWM signal. Within the semiconductor hierarchy, TAS5754MDCA is an audio amplifier IC and belongs to the broader amplifier and power-management semiconductor categories. Its digital-input architecture simplifies source routing and allows a system controller to select and process audio signals before the power stage performs high-current speaker drive.

The headline capabilities are 40 W per channel in stereo mode, 61 W into a mono load, operation from 4.5 V to 26.4 V, digital audio input, and a closed-loop Class-D output stage. These characteristics place the amplifier in mid-power audio applications where efficient conversion of a DC supply into low-distortion speaker drive is important. The integrated exposed-pad package is designed for board-level heat dissipation through its thermal pad and PCB copper.

TAS5754MDCA integrates an audio processor with the Class-D power stage. The digital interface reduces dependence on analog source paths, while the closed-loop architecture addresses output distortion through feedback around the power stage. Configuration and control are handled through the device's digital control interface, allowing system-level management of the amplifier when the surrounding circuit is designed according to the manufacturer reference design.

Typical applications include powered speakers, sound bars, television or monitor audio, compact home-theater systems, active loudspeakers, and other consumer or professional audio products. A 4.5 V minimum supply supports portable and lower-voltage powered systems, while the 26.4 V maximum permits higher-voltage class-D amplifier rails. The 40 W stereo rating is especially relevant to multimedia speakers, while the 61 W mono capability supports higher-power single-channel operation.

Design the power supply for the selected output mode rather than assuming the nominal speaker rating applies continuously. Place the exposed pad on a thermal-via and copper-pad pattern that satisfies the manufacturer layout guidance, keep high-current output routing compact, and follow the recommended input, power, ground, and filtering connections. The digital interface also requires a compatible host or audio processor and correctly configured communication routing.

This product page combines the manufacturer specifications, package details, functional use cases, engineering design guidance, and a clear replacement-screening framework. It is intended to help engineers determine whether the TAS5754MDCA provides the required channel configuration, output power, supply range, digital interface, and package for a new audio-amplifier design.

드롭인 대체품: TAS5754MDCA — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

TAS5754MDCAR

✅ 드롭인
📦 HTSSOP-48 (DCA)
Same 40 W stereo and 61 W mono device configuration; reel packing replaces the tube form, with no change to the stated electrical ratings.

📋 참조 대체품 (카탈로그에 없음)

TAS5753MDDCAR

✅ 드롭인
📦 HTSSOP-48
Same 48-pin HTSSOP Class-D family and digital-input architecture; the processor features and output ratings differ from the target 40 W stereo and 61 W mono configuration.

📋 참조 대체품 (카탈로그에 없음)

TAS5751MDCAR

✅ 드롭인
📦 HTSSOP-48
Same 48-pin HTSSOP Class-D audio-amplifier format; processor capability and output-power rating differ from the target 40 W stereo and 61 W mono configuration.

📋 참조 대체품 (카탈로그에 없음)

TAS5754MDCA 최대 정격 & 전기적 특성

Stereo Output Power 40 W
Mono Output Power 61 W
Supply Voltage Range 4.5 V to 26.4 V
Amplifier Type Closed-loop Class-D audio amplifier
Input Type Digital input
Channel Configuration 1-channel mono or 2-channel stereo
Integrated Audio Processor Yes
패키지 48-pin HTSSOP
Package Type HTSSOP with exposed pad
Number of Terminals 48
Terminal Form Gull wing
Package Shape Rectangular

TAS5754MDCA rectangular 핀 구성 가이드

TAS5754MDCA(rectangular 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.

TAS5754MDCA의 rectangular 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: TAS5754MDCA.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

TAS5754MDCA 적합 용도: 6 애플리케이션s: Powered Stereo Speakers, Television and Monitor Audio, Sound Bars, Home Theater Amplification, Active Bookshelf Speakers, Portable and Embedded Audio Systems.

🔊

Powered Stereo Speakers

The TAS5754MDCA fits powered stereo speakers because it provides 40 W per channel and accepts digital audio rather than requiring a separate line-level input stage. A digital audio receiver or processor can feed the amplifier while the integrated audio processor supports system configuration. This arrangement reduces signal-conversion stages in connected speakers, although the final thermal design must account for both output power and the 48-pin HTSSOP exposed pad.

📺

Television and Monitor Audio

Television and monitor systems can use the TAS5754MDCA to drive left and right speakers from a digital audio source. Its 40 W stereo capability is suitable for compact multimedia speakers, while the 4.5 V to 26.4 V operating range permits integration with different system rails. Digital control also enables coordinated mute or configuration functions when the host processor supports the required interface.

🎵

Sound Bars

A sound bar can use the TAS5754MDCA for compact stereo amplification of left, center, or right channels when 40 W per channel is sufficient. The digital input helps preserve the digital signal path from decoding through to the power stage, while the integrated processor reduces the need for separate source routing. Designers should account for enclosure heat dissipation and maintain copper around the exposed thermal pad.

🏠

Home Theater Amplification

The TAS5754MDCA can provide high-efficiency Class-D drive in an active home-theater speaker or compact multi-channel amplifier. Its 40 W stereo rating supports common bookshelf and multimedia speaker power levels, while the 61 W mono specification can serve single-channel subwoofer or dedicated-channel designs where the load and test conditions meet the device requirements. Digital routing enables centralized source selection and volume control.

🔈

Active Bookshelf Speakers

Active bookshelf speakers benefit from the TAS5754MDCA when a digital source and integrated amplification are desired in a compact enclosure. The closed-loop Class-D topology supports efficient speaker drive, and the 48-pin HTSSOP package provides a high pin count for control, power, and signal connections. Mechanical engineers should evaluate acoustic enclosure heating and orient the PCB to transfer heat from the exposed pad into a balanced copper area.

📱

Portable and Embedded Audio Systems

The 4.5 V minimum supply of the TAS5754MDCA makes it relevant to portable or embedded powered-audio products that cannot rely on a high-voltage class-D rail. Digital source integration can reduce external analog circuitry, while 40 W stereo capability supports louder enclosures than a headphone-only device. Battery and thermal design must be evaluated together because higher output power increases supply demand and board heating.

What is the TAS5754MDCA?
The TAS5754MDCA is a digital-input, closed-loop Class-D audio amplifier from Texas Instruments designed for 40 W stereo output or 61 W mono output. According to the Texas Instruments TAS5754M product page, it operates from 4.5 V to 26.4 V and is packaged in a 48-pin HTSSOP with an exposed pad. Its digital interface and integrated audio processor distinguish it from conventional analog-input Class-D amplifiers.
What are the key specifications of TAS5754MDCA?
The key TAS5754MDCA specifications are 40 W stereo output, 61 W mono output, a 4.5 V to 26.4 V supply range, digital input, and a 48-pin HTSSOP package. The Texas Instruments TAS5754M product page identifies the device as a closed-loop Class-D amplifier with an integrated audio processor. These ratings form the primary basis for selecting it for powered-speaker, multimedia, television, and sound-bar designs.
What is the operating voltage of TAS5754MDCA?
The TAS5754MDCA operates from 4.5 V to 26.4 V according to the Texas Instruments TAS5754M product page. This range supports both lower-voltage portable or embedded audio systems and higher-voltage powered-speaker designs. The actual rail limits for the amplifier, digital interface, and associated circuitry should be confirmed against the manufacturer datasheet before schematic signoff.
How much power can TAS5754MDCA deliver?
The TAS5754MDCA can deliver 40 W per channel in stereo operation or 61 W into a mono load, based on the Texas Instruments TAS5754M product page. These figures are output-power ratings rather than guaranteed continuous values for every speaker impedance and supply condition. Check the manufacturer test conditions, thermal limits, and recommended PCB layout before using the ratings as a system-level guarantee.
Where can I download the TAS5754MDCA datasheet PDF?
The official TAS5754M datasheet and supporting documents are accessible through the Texas Instruments product page at https://www.ti.com/product/TAS5754M. Open the Documents or Data Sheet section for the manufacturer PDF. The device is also indexed under the TAS5754MDCA ordering code, so use the full part number when checking package, quantity, and ordering information.
Where can I find the TAS5754MDCA pinout?
The TAS5754MDCA pinout should be taken from the pin-configuration section of the Texas Instruments TAS5754M datasheet because the device uses a 48-pin HTSSOP with an exposed pad. The exposed pad is a thermal and electrical package feature and must be connected according to the manufacturer's layout instructions. Use the datasheet pin table when assigning digital-control, power, ground, and signal connections.
What can replace the TAS5754MDCA?
A valid drop-in replacement for the TAS5754MDCA must use the same 48-pin HTSSOP footprint, preserve pin-to-pin signal and power assignments, and meet the required digital-interface and output-power specifications. No pin-compatible replacement can be confirmed from the current manufacturer and cross-reference information alone. Use the Texas Instruments cross-reference search or the Request a Quote form on this page to identify a current sourcing option without treating a merely similar amplifier as interchangeable.
Is the TAS5754MDCA suitable for a powered speaker?
The TAS5754MDCA is suitable for a powered speaker requiring digital audio input and up to 40 W per channel in stereo mode or 61 W mono. Its closed-loop Class-D output stage and 4.5 V to 26.4 V supply range support typical powered-audio architectures. Final suitability depends on speaker impedance, thermal conditions, the digital host interface, and compliance with the manufacturer's layout and test requirements.
When should I choose TAS5754MDCA over another Class-D amplifier?
Choose the TAS5754MDCA when a design specifically benefits from digital audio input, an integrated audio processor, 40 W stereo capability, and 61 W mono operation. It is particularly suitable for powered speakers, sound bars, and television or monitor audio. Select another amplifier when its input architecture, output rating, speaker-load support, thermal design, or protection features better match a different system requirement.
TAS5754MDCA versus an analog-input Class-D amplifier: which is better?
The TAS5754MDCA is better when the source is a digital audio bus and system-level digital control is desired. An analog-input amplifier is better when the source already provides a conventional analog line signal and a digital codec or interface is unnecessary. The TAS5754MDCA provides 40 W stereo and 61 W mono performance from a 4.5 V to 26.4 V supply, but requires the correct digital host and configuration.
What is the best Texas Instruments equivalent for TAS5754MDCA?
No Texas Instruments equivalent can be designated a drop-in replacement without matching the 48-pin HTSSOP pinout, exposed-pad implementation, digital interface, supply range, and output stage. Texas Instruments offers an official cross-reference search for this purpose. A functionally similar stereo Class-D amplifier may require different control software, a different pinout, or PCB changes, so it should not be treated as a direct replacement.
Does TAS5754MDCA require an exposed-pad thermal layout?
Yes, the TAS5754MDCA uses a 48-pin HTSSOP with an exposed pad, and the pad must be implemented according to the Texas Instruments package and layout guidance. A thermal-via and copper-pad arrangement helps transfer heat from the device into the PCB. The exposed pad may also require a prescribed electrical connection, so follow both the pin table and reference layout rather than treating it as an isolated thermal feature.
Is TAS5754MDCA in stock and what is its lead time?
Current stock and manufacturing lead time for the TAS5754MDCA should be requested through the Request a Quote form on this page. The manufacturer product page identifies the TAS5754M device family, but a family-level listing does not guarantee allocation for the exact ordering code. Include the required quantity, packaging format, shipment destination, and target date when requesting a quotation and lead-time confirmation.
Where can I buy TAS5754MDCA online?
Use the Request a Quote form on this page to ask for TAS5754MDCA pricing, stock confirmation, and lead time. The request should specify the exact MPN TAS5754MDCA, required quantity, shipment destination, and whether the standard tube packaging is acceptable. This route provides a focused quotation for the exact ordering code rather than relying on a family listing that may cover different package or temperature variants.
What is the price of TAS5754MDCA?
The current TAS5754MDCA price depends on quantity, package form, availability, and shipment requirements. Submit the exact MPN and requested quantity through the Request a Quote form on this page to obtain a current quotation. Requesting a quote also allows XAIPART to confirm allocation and lead time rather than presenting a potentially stale or quantity-ambiguous figure.
Does TAS5754MDCA meet RoHS and REACH requirements?
The current RoHS and REACH status for the exact TAS5754MDCA ordering code should be confirmed through the manufacturer product documentation or a current compliance declaration. The manufacturer product page is the appropriate starting point for material and environmental compliance documents. Do not infer certification from the package type or from a distributor category listing, because environmental declarations can be maintained separately for an exact orderable part.

엔지니어링 참조 데이터: TAS5754MDCA — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the TAS5754MDCA for a powered-speaker or multimedia-audio design that uses a digital source, needs 40 W stereo output or 61 W mono output, and can accommodate a 48-pin HTSSOP with exposed pad. Its integrated audio processor can simplify digital routing, but the host software and communication interface must be implemented correctly. A device with analog input is preferable when the board already has a line-level signal and no digital control is required. A higher-output amplifier is needed when continuous speaker power must exceed the manufacturer's stated conditions. Before treating another part as a replacement, require the same footprint, pin assignments, digital protocol, supply limits, control behavior, and acceptable thermal performance; a functionally similar Class-D amplifier may still require PCB and firmware changes.

대체품과의 비교

파라미터 이 제품
Brand Texas Instruments
Package 48-pin HTSSOP with exposed pad
Stereo Output Power 40 W
Mono Output Power 61 W
Supply Voltage Range 4.5 V to 26.4 V
Input Architecture Digital input
Output Stage Closed-loop Class-D
Integrated Audio Processor Yes
Channel Modes Mono or stereo

주요 차별점

  • High stereo output in a digital-input Class-D amplifier (vs TAS5754MDC)
  • Integrated digital audio processing (vs Analog-input Class-D amplifier)
  • Closed-loop Class-D output architecture (vs Open-loop Class-D amplifier)
  • Broad supply range for powered audio (vs Low-voltage portable Class-D amplifier)

설계 노트

Assign a dedicated exposed-pad copper area and thermal vias according to the Texas Instruments package drawing and recommended land pattern. Estimated: the power dissipated by the amplifier equals output power divided by class-D efficiency, less the power delivered to the speaker. With efficiency E, Pdevice is approximately Pout divided by E; use the actual rail and load conditions rather than the nominal output rating alone. Validate the final junction temperature in the intended enclosure.

Use the manufacturer reference layout for the 48-pin HTSSOP and place decoupling capacitors close to their associated supply and ground pins. Keep the exposed-pad vias within the recommended pad geometry without violating manufacturing rules for tenting or soldering. Route the digital interface away from output and switching-current paths, and provide a low-impedance ground return for the power stage. Confirm all pin names against the manufacturer pin table before releasing artwork.

Size the supply for the selected stereo or mono mode, amplifier efficiency, and control-circuit demand. The listed 40 W stereo and 61 W mono ratings are maximum application cases with defined test conditions, not a guarantee that every supply, speaker impedance, board, and enclosure combination can sustain them. Add local bulk and high-frequency decoupling, keep converter loops away from sensitive control nets, and verify startup, mute, and brownout behavior across the full 4.5 V to 26.4 V input range.

Treat the digital audio and control interface as a routed digital signal, not as an analog audio trace. Use continuous reference planes where practical, avoid stubs, observe the interface voltage and timing requirements, and confirm that the host driver matches the TAS5754MDCA configuration protocol. Place protection or filtering components where they will not distort the intended digital signal. This prevents software, edge-rate, and routing issues from being mistaken for speaker-amplifier failures.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The current material and environmental declarations for the exact TAS5754MDCA ordering code must be confirmed from the Texas Instruments product documentation. AEC-Q100 is not applicable because the product is an audio amplifier rather than an automotive-qualified device.

데이터 검증일: 2026-11-10 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

TAS5754MDCA datasheet TAS5754MDCA specifications TAS5754MDCA pinout TAS5754MDCA datasheet pdf Texas Instruments TAS5754MDCA TAS5754MDCA 40W stereo TAS5754MDCA 61W mono TAS5754MDCA 48 HTSSOP TAS5754MDCA powered speaker TAS5754MDCA equivalent TAS5754MDCA replacement TAS5754MDCA price TAS5754MDCA stock TAS5754MDCA sound bar amplifier TAS5754MDCA application circuit

관련 부품 & 용어

Texas Instruments TAS5754MDCA TAS5754M Class-D audio amplifier digital-input amplifier closed-loop amplifier audio amplifier IC power amplifier semiconductor PWM digital audio processor 40 W stereo output 61 W mono output 4.5 V to 26.4 V supply 48-pin HTSSOP HTSSOP package family exposed pad surface-mount package powered speaker sound bar television audio active loudspeaker thermal via digital audio interface
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기