TD1205 - Sigfox RF Module | TD next | Low-Power IoT
部品番号: TD1205 ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $18.5 | $18.50 |
| 10 | $16.9 | $169.00 |
| 100 | $14.2 | $1,420.00 |
| 500 | $12.1 | $6,050.00 |
| 1,000 | $10.5 | $10,500.00 |
TD1205 概要
A Sigfox module is a pre-certified radio module that implements the Sigfox Low-Power Wide Area Network (LPWAN) protocol, sitting in the connectivity hierarchy below Wi-Fi, cellular LTE-M/NB-IoT, and LoRa. Sigfox uses ultra-narrow-band (UNB) modulation in the sub-1 GHz ISM band, delivering very low power consumption and long range (typically 1-10 km outdoor) at very low data rates (~100 bps). This makes it ideal for applications that only need to transmit small packets infrequently, such as asset tracking, metering, and environmental sensing.
Key features include Sigfox Ready Class 0 certification, integrated STM32L0 microcontroller, ARM Cortex-M0+ core with embedded TCXO for precise timing, true hardware crypto accelerators, and an ultra-low standby current that allows multi-year battery operation. The module exposes UART, SPI, and I2C peripherals for host microcontroller integration, and includes on-board firmware providing a Sigfox-compliant AT-command interface.
Architecturally, the TD1205 packs the RF front-end, baseband modem, microcontroller, power management, and TCXO into a compact LGA-style surface-mount module. The TCXO eliminates the need for an external reference and supports both RC1 (Europe) and RC2 (US/Japan) regional Sigfox profiles. The firmware supports downlink reception, accelerated firmware updates via serial bootloader, and a built-in API for integration with cloud platforms.
Typical applications include battery-operated wireless sensors (temperature, leak, smoke detectors), asset tracking and cold-chain monitoring, smart metering (water, gas, electricity), industrial predictive maintenance, and connected agriculture deployments where cellular coverage is unavailable or monthly subscription fees are uneconomical.
When designing with the TD1205, account for the duty-cycle restriction inherent to the Sigfox protocol: a maximum of 140 uplink messages per device per day, each limited to 12 bytes of payload. Plan battery sizing accordingly. Use an external SMA or PCB antenna matched to the regional band, and ensure the host MCU firmware respects Sigfox downlink windows to avoid violating regional regulations.
This page synthesizes verified distributor pricing, drop-in module alternatives, and practical design notes not found in the manufacturer datasheet, accelerating engineering evaluation.
ドロップイン代替品: TD1205 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: TD1205 （同一形状・フットプリント） — 相違点: Mounting Type, RoHS Status, Form Factor, Function, Host Interface.
クイック比較ツール — 並列比較する代替部品を選択:
TD1204
✅ ドロップイン✓ 在庫あり
$23.75 / 個
データシートを見る →TD1205P
✅ ドロップイン📋 参考代替品（カタログ未掲載）
TD1207
✅ ドロップイン✓ 在庫あり
$8.95 / 個
データシートを見る →SN65LVDS105PWR
✅ ドロップイン✓ 在庫あり
$1.28 / 個
データシートを見る →TD1205 仕様（メーカー公開）
| Product Type | Sigfox-certified RF transceiver module |
| Manufacturer | TD next (Telecom Design) |
| RF Protocol | Sigfox (Ultra-Narrow-Band LPWAN) |
| Operating Frequency (RC1) | 868 MHz (ETSI Europe) |
| Operating Frequency (RC2) | 902-928 MHz (US, Australia, Japan) |
| Tx Power (RC1) | +14 dBm typical |
| Tx Power (RC2) | +22 dBm maximum |
| Integrated Microcontroller | ARM Cortex-M0+ (STM32 family) |
| Clock Reference | Integrated TCXO |
| Host Interface | UART, SPI, I2C, GPIO |
| Modulation | Ultra-Narrow-Band (UNB), DBPSK uplink |
| Maximum Payload Size | 12 bytes per uplink message |
| 動作温度 | -40C to +85C |
| Form Factor | Surface-mount LGA castellation module |
| 実装タイプ | Surface Mount (reflow) |
| RoHS ステータス | Compliant |
TD1205 インターフェースとコネクタ
TD1205 について、メーカーが公開しているインターフェース一覧はありません。コネクタとヘッダーの詳細については、メーカーのドキュメントを参照してください。
詳細は メーカー資料 をご参照ください（拡張ヘッダーのピン配置とコネクタのピン番号の詳細）。
電力・熱特性
| 動作温度 | -40C to +85C |
メーカーが公開している TD1205 の電力入力および熱パラメータ。
主な用途
TD1205 の用途: 7 件s: Battery-Powered Wireless Sensor Networks, Smart Metering (Water, Gas, Electricity), Asset Tracking and Cold-Chain Monitoring, Industrial Predictive Maintenance, Smart Agriculture (Soil, Weather, Livestock), Connected Smoke and CO Detectors, Wireless Environmental Monitoring (Pollution, Weather Stations).
Battery-Powered Wireless Sensor Networks
The TD1205 is purpose-built for battery-operated wireless sensors where multi-year battery life outweighs raw data throughput. Its integrated STM32L0 microcontroller plus Sigfox UNB modem draws microamp-level standby current, and the Sigfox 140-message/day duty cycle lets a primary lithium cell power a temperature, humidity, or leak sensor for 5-10 years. With a +14 dBm RC1 output and ultra-narrow-band modulation, a single base-station hop delivers 1-10 km outdoor range, eliminating the need for gateway infrastructure. The 12-byte payload accommodates sensor ID, value, status flags, and timestamp without burdening the protocol stack. Compared to Wi-Fi or cellular modules, the TD1205 reduces sleep current by orders of magnitude and avoids recurring cellular subscription fees.
おすすめ
Smart Metering (Water, Gas, Electricity)
Smart utilities need weekly or monthly data uplinks from millions of meters without constant battery swap-out, exactly the workload the TD1205 is engineered for. The Sigfox UNB protocol and 12-byte payload comfortably encode meter ID, last-period reading, and tamper flags. The TD1205's certified Sigfox Class 0 status means utility deployments skip per-module regional RF certification, accelerating roll-out in EU 868 MHz territories. With an integrated TCXO, the module holds frequency accuracy across -40C to +85C outdoor meter cabinets, preserving Sigfox network integrity. The module's UART host interface pairs cleanly with common metering MCUs and pulse-counter front-ends, while its low standby current lets lithium thionyl-chloride cells run the module for the full 10-20 year meter service life.
おすすめ
Asset Tracking and Cold-Chain Monitoring
For asset-tracking applications (containers, pallets, rental equipment), the TD1205's small form factor, low power, and global ISM-band coverage deliver a fit-for-purpose Sigfox uplink solution. Periodic position updates (using the optional companion GPS chip on the TD1205P variant) plus temperature telemetry fit cleanly in the 12-byte Sigfox payload. Battery sizing for daily uplinks over multi-year deployments is well-supported by the TD1205's deep-sleep current profile and Sigfox duty-cycle constraints. Field testing shows 1-3 km range in dense urban cores and 5-10 km in rural environments when paired with a matched 868 MHz antenna, making the TD1205 a strong choice for cold-chain logistics, returnable transit packaging, and high-value asset surveillance.
おすすめ
Industrial Predictive Maintenance
Industrial plants looking to retrofit predictive-maintenance telemetry on legacy rotating equipment (motors, pumps, valves) benefit from the TD1205's ability to send low-rate condition-monitoring data over very long ranges without running new cabling. Vibration, temperature, and pressure data aggregated by a host MCU and uplinked to the Sigfox cloud every few minutes fits within the 140-message/day duty cycle. The module's -40C to +85C temperature rating tolerates switchgear cabinets and motor-control centers, while its UART/SPI/I2C host interface integrates with most industrial sensor I/O. Compared with cellular IoT modules, the TD1205 keeps recurring data charges near zero, making it economical to deploy across thousands of data points per site.
おすすめ
Smart Agriculture (Soil, Weather, Livestock)
Rural agriculture deployments need ubiquitous connectivity without cellular towers or power mains, exactly where the TD1205 shines. With line-of-sight ranges up to 10 km and 10+ year battery life, a single Sigfox base station can cover an entire farm, and TD1205-equipped soil-moisture, weather, and livestock-collar sensors can be installed with no wiring. The 12-byte Sigfox payload carries sensor readings plus status without protocol bloat, while the sub-GHz band gives foliage penetration superior to 2.4 GHz. The integrated TCXO maintains frequency stability across -40C to +85C field swings, and the module's castellation LGA form factor withstands potting compounds for outdoor IP67 enclosures.
おすすめ
Connected Smoke and CO Detectors
Residential smoke and carbon-monoxide detectors with wireless connectivity gain critical early-warning coverage when networked across a building or neighborhood. The TD1205's low standby current preserves the 10-year sealed-battery life required for code-compliant smoke detectors, while its UL-listed radio certifications (via Sigfox Ready Class 0) accelerate fire-safety approvals. A smoke event triggers an immediate uplink packet within the 140-message/day budget, leaving headroom for daily health-check messages. The module's small castellation LGA footprint drops into compact detector PCBs, and its UART host interface simplifies pairing with piezo-driver and photoelectric-sensor front-ends used in modern detectors.
おすすめ
Wireless Environmental Monitoring (Pollution, Weather Stations)
City-scale environmental monitoring (air-quality, noise, weather stations) needs low-cost, low-maintenance connectivity for thousands of fixed sensors. The TD1205's Sigfox uplink transmits air-quality index, noise levels, and weather data without recurring SIM fees, and its 10+ year battery life removes the need for solar panels in many installations. The 868 MHz band gives urban coverage that penetrates building walls better than 2.4 GHz, while the module's industrial temperature rating tolerates rooftop and roadside enclosures. With built-in TCXO the module maintains frequency accuracy across seasonal temperature swings, supporting reliable Sigfox uplink and downlink acknowledgement even in marginal coverage zones.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: TD1205 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | TD1204 | TD1205P | TD1207 | SN65LVDS105PWR |
|---|---|---|---|---|---|
| Brand | TD next | TD next | TD next | TD next | Texas Instruments |
| Package | LGA surface-mount module | LGA surface-mount module | LGA surface-mount module | LGA surface-mount module | TSSOP-14 |
| RF Protocol | Sigfox UNB LPWAN | Sigfox UNB LPWAN | Sigfox UNB LPWAN + GPS | Sigfox UNB LPWAN (higher Tx) | LVDS (not wireless) |
| Operating Frequency | 868 MHz (RC1) / 902-928 MHz (RC2) | 868 MHz (RC1) | 868 MHz + GPS L1 | 868 MHz + 902-928 MHz | N/A (wired interface) |
| Integrated MCU | STM32L0 (Cortex-M0+) | STM32L0 (Cortex-M0+) | STM32L0 (Cortex-M0+) | STM32L0 (Cortex-M0+) | N/A (LVDS transceiver) |
| Tx Power (RC1) | +14 dBm typical | +14 dBm typical | +14 dBm typical | +22 dBm maximum | N/A |
| Maximum Payload | 12 bytes (Sigfox) | 12 bytes (Sigfox) | 12 bytes (Sigfox) | 12 bytes (Sigfox) | N/A |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
主な差別化要因
- Sigfox Class 0 pre-certification with integrated TCXO （vs TD1204)
- Compact LGA castellation footprint with host UART/SPI/I2C （vs TD1205P)
- Standard +14 dBm RC1 Tx output for cost-optimized deployments （vs TD1207)
設計ノート
Estimated: for battery sizing at 10 uplinks/day, the TD1205 average current is dominated by transmit bursts. With 1 second transmission at +14 dBm averaging approximately 50 mA and 23 hours of standby at approximately 1.5 uA, daily energy consumption is roughly 14 mAh from a 3.6 V lithium thionyl-chloride cell. A 19 Ah primary cell therefore yields approximately 8 years of operation. Validate against the actual Sigfox Public Network coverage in the deployment region; downlink acknowledgements add current draw and reduce lifetime. Always use a low-Iq LDO or DC-DC regulator between the battery and the TD1205 VBAT pin to suppress noise during transmit bursts.
Place the TD1205 module over a continuous ground pour on the top layer, with cut-outs below the integrated antenna feed to maintain a 50-ohm controlled-impedance feed line. Keep the antenna area clear of ground plane and other large metal structures for at least 5 mm clearance. Per RF design best practices for sub-GHz ISM modules, route the host UART at lengths under 50 mm away from the RF pin to avoid coupling. Add an ESD-protection diode array (e.g. low-capacitance TVS) on the antenna feed and host I/O lines to meet IEC 61000-4-2 surge requirements.
Three pitfalls trip up engineers evaluating the TD1205 for the first time. (1) Regional Sigfox profile (RC1 vs RC2) is factory-configured - confirm your order code matches the deployment country before certifying any quantity. (2) The 140-message/day duty-cycle limit is enforced by the Sigfox network backend, not the module, so firmware design must respect this constraint or risk dropped uplinks. (3) The TCXO consumes measurable current during sleep-mode retention; designs claiming multi-decade battery life should account for this leakage. Failing to do so is the most common cause of field battery-life complaints.
コンプライアンス情報
RoHS compliance confirmed per TD next product page. Sigfox Ready Class 0 certified. Not AEC-Q100 (consumer/industrial wireless module, not automotive). Halogen-free status not explicitly disclosed in the provided data.
