THS1041CDW - 10-Bit 40-MSPS ADC with PGA | Texas Instruments
部品番号: THS1041CDW ✓ 生産中THS1041CDW 概要
An ADC is a semiconductor that converts an analog voltage into a digital code. The THS1041 belongs to the parallel-output ADC, data-converter IC, and signal-processing semiconductor hierarchy. Its 10-bit resolution represents each sampled input with 1,024 digital levels, while the 40-MSPS conversion rate supports high-bandwidth signal processing. These characteristics make the device relevant to set-top boxes, video equipment, multimedia systems, CCD input circuits, color scanners, and communications equipment.
The programmable gain amplifier provides adjustable input conditioning before conversion, and the internal precision clamp supports dc restoration for video signals. A pipelined architecture separates sampling and conversion functions, enabling the advertised 40-MSPS throughput. The parallel interface exposes converted data through dedicated output pins, avoiding a serial-link bandwidth bottleneck at high sample rates. The device is identified as a low-power ADC with a 3 V single-supply operating condition.
The THS1041CDW is packaged in a 28-pin SOIC. Its 10-bit output supports compact digital buses, although the parallel interface still requires careful routing to reduce data-transition noise. The converter is suited to video and imaging systems where sample rate, clamp behavior, gain control, and direct parallel digital outputs are more important than minimal package size.
Typical deployments include composite or component video digitization, CCD-based scanners, multimedia capture, communications receivers, high-speed data acquisition, and embedded imaging systems. In these applications, the 40-MSPS rate provides temporal resolution, the PGA adapts the input amplitude, and the clamp can establish a stable dc reference for video signals.
PCB implementation should treat the analog input and clock as critical paths. Keep the analog trace short, provide a quiet return path, and place decoupling and clock components close to their associated pins. Since this device exposes a parallel bus, route output data away from the sensitive input and clock network, and match trace lengths where downstream timing is timing-critical.
This product summary combines the manufacturer-linked datasheet information with component listings, package details, application guidance, and replacement analysis. It highlights where the THS1041CDW fits, how its converter features should be used, and which engineering checks remain necessary before substituting another ADC.
ドロップイン代替品: THS1041CDW — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: THS1041CDW (同一形状・フットプリント) — 相違点: Package, Architecture, Operating Temperature Range, Output Interface, Supply Voltage.
THS1041IDWR
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →THS1040CDW
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →THS1031IDW
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →THS1041CDW 最大定格&電気的特性
| 分解能 | 10 bit |
| Conversion Rate | 40 MSPS |
| Input Channels | 1 channel |
| Architecture | 1 input, 1 pipelined converter |
| Output Interface | Parallel |
| Programmable Gain Amplifier | Internal PGA |
| Internal Clamp | High-precision internal clamp |
| 電源電圧 | 3 V |
| 入力電圧範囲 | 0 V to 70 V |
| Power Consumption | 55.5 mW |
| 動作温度 | -40 °C to +85 °C |
| パッケージ | 28-pin SOIC, 7.50 mm width |
| 実装タイプ | Surface mount |
| Technology | CMOS |
| Word Access | Parallel word access |
THS1041CDW 28-pin soic, 7.50 mm width ピン配置ガイド
THS1041CDW (28-pin soic, 7.50 mm width パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: THS1041CDW.
詳細は データシート をご参照ください。
主な用途
THS1041CDW の用途: 6 件s: Video Signal Digitization, CCD-Based Color Scanning, High-Speed Data Acquisition, Set-Top-Box Video Processing, Communications Signal Capture, Industrial Imaging Systems.
Video Signal Digitization
The THS1041CDW fits video digitization because it combines 10-bit resolution with a 40-MSPS conversion rate and an internal high-precision clamp for dc restoration. The clamp helps establish a stable reference within composite or component video signals, while the parallel output transfers each 10-bit sample directly into a digital video pipeline. In a set-top-box or video capture design, the converter can sample composite inputs without an external sample-and-hold stage. Designers should still account for the input bandwidth required to preserve the 40-MSPS operating rate and use controlled impedance routing for the 10-bit parallel bus to reduce timing and crosstalk errors.
おすすめ
CCD-Based Color Scanning
The THS1041CDW is suitable for CCD input systems because its 10-bit resolution preserves fine amplitude detail while its 40-MSPS rate supports rapid successive-pixel conversion. The internal programmable gain amplifier can condition the CCD output before sampling, reducing the amount of external gain control required in a scanner signal chain. Its single-channel pipelined operation aligns with a multiplexed analog CCD video output. Layout is especially important because the CCD clock, analog video trace, converter input, and digital outputs share one compact board area; route the analog input away from parallel data lines and keep return currents continuous.
おすすめ
High-Speed Data Acquisition
For high-speed acquisition systems, the THS1041CDW provides a 10-bit, 40-MSPS parallel ADC with programmable input gain and an internal clamp. Those features allow a design to capture rapidly changing analog waveforms without requiring a serial-output interface in the conversion stage. The parallel result bus can feed an FPGA or capture logic directly, subject to correct timing and impedance control. The converter's 3 V single-supply operation also simplifies power partitioning, although analog and digital sections should be separated carefully and the input network must provide the required source impedance and bandwidth.
おすすめ
Set-Top-Box Video Processing
The THS1041CDW matches set-top-box video-processing requirements with its 40-MSPS conversion rate, 10-bit output resolution, and internal precision clamp. The clamp can assist with video dc restoration, while the PGA accommodates different input levels before conversion. A parallel interface allows the digitized video to enter downstream processing logic without serial deserialization. Practical implementation should focus on clean analog grounding, controlled clock routing, and careful mapping of all 10 output bits, since simultaneous data transitions near the converter can create return-current disturbance on imperfect layouts.
おすすめ
Communications Signal Capture
The THS1041CDW can serve in communications signal-capture circuitry where a 10-bit conversion resolution and 40-MSPS throughput are required. The single analog input supports a channel selected by external RF or baseband circuitry, and the programmable gain amplifier allows the front end to scale the incoming signal into the converter's usable range. The parallel output is advantageous when downstream logic requires immediate access to every sample. Engineers should ensure that the analog front end, anti-alias filtering, and clock source provide predictable gain and phase behavior across the required bandwidth; ADC conversion speed alone does not guarantee system accuracy.
おすすめ
Industrial Imaging Systems
The THS1041CDW is applicable to industrial imaging systems that need repeatable sampling of sensor or video signals without excessive power use. Its 10-bit resolution provides 1,024 digital levels, the 40-MSPS rate supports fast frame acquisition, and the internal PGA simplifies front-end gain selection. These characteristics are useful in machine-vision and embedded imaging equipment where analog amplitude must be converted before image processing. The design should minimize analog trace length, isolate clock routing from the input, and use a solid ground-plane strategy so converter performance is not reduced by digital switching noise coupled into the sensing path.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: THS1041CDW — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | THS1041IDW | THS1040CDW | THS1031IDW |
|---|---|---|---|---|
| Package | 28-SOIC | 28-SOIC | 28-SOIC | 28-SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Conversion Rate | 40 MSPS | 40 MSPS | 40 MSPS | 40 MSPS |
主な差別化要因
- Integrated precision clamp for video dc restoration (vs THS1040CDW)
- Programmable analog conditioning within the converter (vs THS1031IDW)
- High-speed parallel output avoids serial-interface overhead (vs THS1041IDW)
設計ノート
Route the analog input as a short, controlled-impedance trace and keep the analog ground connection close to the converter. Place input and bypass components directly at the associated pins rather than distributing them along the board. Because the converter also drives a 10-bit parallel bus, keep those output traces away from the input and clock nets. A continuous ground plane under the device helps control return-current paths when several output bits change at once.
Account for simultaneous data transitions on the 10-bit parallel output when defining clock and data timing at the receiving device. Use matched layer transitions and maintain consistent trace geometry where the bus length permits. Avoid routing the clock adjacent to the sensitive analog input, and use a short ground-return path beneath the bus. Validate the final layout with simulation or measurements because converter timing, receiver setup time, loading, and PCB loss can materially affect capture margin.
Design a dedicated low-noise 3 V supply branch for the converter and place local ceramic decoupling at the power pins. Keep the analog input and clock circuitry on the same supply domain or provide compatible level translation. A stable reference is essential because the PGA and precision clamp rely on predictable circuit behavior. Verify supply sequencing and voltage limits against the manufacturer datasheet before energizing a prototype.
Do not assume that every 40-MSPS, 10-bit ADC is interchangeable. Check the full pinout, output coding, input range, clock polarity, PGA settings, clamp behavior, supply limits, and power-up requirements. The THS1041IPWR is functionally similar but uses TSSOP rather than the THS1041CDW's 28-SOIC package, so it requires a different footprint. Use the manufacturer pin-description table and timing diagrams as the authority for implementation.
コンプライアンス情報
The available product information does not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable to this unspecified commercial catalog designation.