TLE42962GV50HTSA1 - 5V 30mA LDO Regulator SCT595-5 | Infineon
部品番号: TLE42962GV50HTSA1 ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $1.4 | $1.40 |
| 10 | $1.25 | $12.50 |
| 100 | $1.05 | $105.00 |
| 500 | $0.9 | $450.00 |
| 1,000 | $0.75 | $750.00 |
TLE42962GV50HTSA1 概要
A linear voltage regulator (also called an LDO when the dropout voltage is small) is a power management integrated circuit that maintains a constant output voltage regardless of input voltage fluctuations and load changes. LDOs sit hierarchically under voltage regulators, which are themselves a category of power management ICs. The TLE4296-2G family specifically addresses the low-current rails required by microcontrollers and sensors in automotive electronic control units, complementing switching DC-DC converters that handle higher-power rails.
Key features include ±4% output voltage accuracy over the full operating range, integrated overtemperature protection, output current limitation, and reverse-polarity protection. The wide input voltage range of 5.5 V to 45 V allows direct connection to the vehicle battery without additional pre-regulation, and the device is qualified to AEC-Q100 standards for automotive reliability.
The TLE42962GV50HTSA1 uses a monolithic bipolar architecture with an on-chip pass transistor and bandgap reference, providing stable regulation across -40 °C to +150 °C junction temperatures. The low quiescent current and integrated protective features make it particularly robust in electrically noisy automotive environments where load-dump and jump-start events are common.
Typical applications include always-on microcontroller power supplies in body and chassis ECUs, sensor power rails, and standby power for infotainment controllers. The compact SCT595-5 package occupies minimal PCB area, enabling dense module designs.
When designing with this regulator, place input and output capacitors close to the IC pins and ensure the dissipation does not exceed package thermal limits at maximum input voltage and load. For higher output current requirements beyond 30 mA, consider the higher-current members of the TLE4296 family or a switching regulator topology.
This page synthesizes distributor pricing, drop-in same-package alternatives, AEC-Q100 compliance notes, and practical design guidance that go beyond the information available in the standalone Infineon datasheet.
ドロップイン代替品: TLE42962GV50HTSA1 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: TLE42962GV50HTSA1 （同一形状・フットプリント） — 相違点: Automotive Qualification, Input Voltage Range, Operating Temperature Range, Package, Protection Features.
クイック比較ツール — 並列比較する代替部品を選択:
TLE42962GV33HTSA1
✅ ドロップイン✓ 在庫あり
$0.62 / 個
データシートを見る →TLE4295GV30HTSA1
✅ ドロップイン📋 参考代替品（カタログ未掲載）
TLE42962GV50HTSA1
✅ ドロップイン✓ 在庫あり
$0.75 / 個
データシートを見る →TLE42962GV50HTSA1 最大定格＆電気的特性
| 出力タイプ | Fixed |
| 出力電圧 | 5.0 V |
| Output Voltage Accuracy | ±4% |
| 最大出力電流 | 30 mA |
| 入力電圧範囲 | 5.5 V to 45 V |
| ドロップアウト電圧 | 250 mV (typical) |
| 動作温度範囲 | -40 °C to +150 °C (junction) |
| パッケージ | PG-SCT595-5 (5-lead SMD, gull wing) |
| 実装タイプ | Surface Mount |
| Regulator Topology | Low-Dropout (LDO) Linear Regulator |
| Automotive Qualification | AEC-Q100 |
| Protection Features | Overtemperature shutdown, output current limit, reverse polarity |
| RoHS ステータス | Compliant |
| ピン数 | 5 |
TLE42962GV50HTSA1 ピン構成
| ピン 1 | IN — Input voltage supply (5.5 V to 45 V) |
| ピン 2 | GND — Ground reference |
| ピン 3 | OUT — Regulated 5.0 V output |
| ピン 4 | NC — Not connected (per datasheet) |
| ピン 5 | TAB — Exposed pad / heat sink, connect to GND |
主な用途
TLE42962GV50HTSA1 の用途: 6 件s: Automotive Body Control Module (BCM) MCU Power, Sensor Power Rail in Chassis ECU, Infotainment Standby Power Supply, Instrument Cluster Always-On Rail, Automotive Lighting ECU Auxiliary Supply, Industrial Sensor Node Power.
Automotive Body Control Module (BCM) MCU Power
The TLE42962GV50HTSA1 is well-suited to supply 5 V microcontroller rails in body control modules, where its 45 V absolute maximum input rating handles 12 V automotive load-dump transients up to 35 V without damage. Its 250 mV dropout maintains regulation during cold-crank events when the bus drops to 6 V, ensuring the MCU never browns out. The AEC-Q100 qualification covers -40 °C to +125 °C ambient operation, and the SCT595-5 footprint minimizes PCB area in densely populated BCMs.
おすすめ
Sensor Power Rail in Chassis ECU
In chassis electronic control units, the TLE42962GV50HTSA1 provides a stable 5 V supply for Hall-effect sensors, accelerometers, and pressure sensors that draw under 30 mA. The integrated reverse-polarity and overtemperature protection increases robustness against wiring faults in underbody installations. The low quiescent current and ±4% output accuracy keep sensor readings consistent across the full automotive temperature range, while the small SCT595-5 package supports compact sensor cluster PCBs.
おすすめ
Infotainment Standby Power Supply
The TLE42962GV50HTSA1 serves as a standby rail in infotainment head units, supplying 5 V to the always-on microcontroller that handles wake-up and CAN bus monitoring while the main processor is off. Its 45 V input tolerance protects against jump-start events on 24 V truck systems, and the 250 mV dropout ensures the rail stays alive at low battery voltages. The device's reverse-polarity protection prevents damage during battery service, while the SCT595-5 SMD package keeps the standby section physically small.
おすすめ
Instrument Cluster Always-On Rail
Digital instrument clusters require an always-on 5 V supply to retain trip computer memory and clock functions even when the ignition is off. The TLE42962GV50HTSA1's low quiescent current minimizes parasitic battery drain, while its 45 V input withstands alternator load-dump transients common in automotive electrical systems. The device operates reliably across -40 °C to +150 °C junction temperatures, ensuring cluster functionality in both cold-start and under-hood heat conditions.
おすすめ
Automotive Lighting ECU Auxiliary Supply
LED headlight control modules and adaptive lighting ECUs use the TLE42962GV50HTSA1 to provide a clean 5 V reference rail for microcontroller logic and communication transceivers. The 45 V absolute maximum input withstands jump-start events on commercial 24 V systems, while the integrated current limit and thermal shutdown protect against short-circuit faults on the lighting harness. The PG-SCT595-5 package allows placement close to the MCU for optimal ground bounce performance.
おすすめ
Industrial Sensor Node Power
Outside the automotive domain, the TLE42962GV50HTSA1 also fits industrial sensor nodes powered from 24 V bus rails where its 45 V input rating, integrated protection features, and wide temperature range provide robust operation. The fixed 5 V output suits many industrial microcontrollers and 4-20 mA loop transmitters, while the SCT595-5 SMD package supports reflow assembly on mixed-technology boards. Reverse-polarity protection simplifies wiring in field installations where miswiring is a common failure mode.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: TLE42962GV50HTSA1 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | TLE42962GV33HTSA1 | TLE4295GV30HTSA1 |
|---|---|---|---|
| Package | PG-SCT595-5 | PG-SCT595-5 (same) | PG-SCT595-5 (same) |
| Brand | Infineon | Infineon | Infineon |
| Output Voltage | 5.0 V | 3.3 V | 3.0 V |
| Maximum Output Current | 30 mA | 30 mA | 30 mA |
| Input Voltage Range | 5.5 V to 45 V | 5.5 V to 45 V | 5.5 V to 45 V |
| Output Voltage Accuracy | ±4% | ±4% | ±4% |
| Automotive Qualification | AEC-Q100 | AEC-Q100 | AEC-Q100 |
| Operating Temperature Range | -40 °C to +150 °C (Tj) | -40 °C to +150 °C (Tj) | -40 °C to +150 °C (Tj) |
主な差別化要因
- Wide 45 V input range for direct automotive bus connection （vs TLE4250GHUSA1)
- Compact SCT595-5 footprint with full 5 V/30 mA function （vs TLE4250GHUSA1 (PG-DSO-8))
- Reverse-polarity and overtemperature protection integrated （vs Generic 5 V LDO (e.g., AMS1117-5.0))
設計ノート
At VIN = 14 V (typical automotive running voltage), VOUT = 5 V, and IOUT = 30 mA, the TLE42962GV50HTSA1 dissipates approximately (14 - 5) × 0.030 = 0.27 W. The PG-SCT595-5 package's theta_JA is in the range of 80-100 C/W (estimated; consult datasheet for exact value), yielding a junction temperature rise of about 25-30 °C above ambient. Adequate PCB copper pour under the exposed pad (pin 5) is essential to keep Tj below the 150 °C absolute maximum in high-temperature underhood installations.
Place the input capacitor (typically 100 nF to 1 µF ceramic) as close as possible to the IN pin (pin 1) and the output capacitor (typically 1 µF to 10 µF ceramic or low-ESR electrolytic) as close as possible to the OUT pin (pin 3). The exposed thermal pad (pin 5) MUST be soldered to a copper pad of at least the same size on the PCB, connected to ground with multiple thermal vias to the inner/inner-bottom ground plane. Keep high-current switching traces away from the regulator input and output traces to minimize noise injection.
Do not exceed the 45 V absolute maximum input voltage - load-dump transients beyond this will damage the IC. Add an external TVS diode (e.g., 36 V or 40 V SMBJ series) for additional transient suppression. The reverse-polarity protection protects the IC, but high reverse voltage transients can still cause failure. Ensure output capacitor ESR remains within the stable region specified by Infineon; very low-ESR ceramic capacitors may require a small series resistor to prevent instability.
Use a star-ground topology where the regulator ground (pin 2) connects directly to the system ground plane at a single point near the IC, rather than through a long trace. This minimizes ground-loop noise from injecting into sensitive analog sensor signals sharing the same ground. For best EMI performance in automotive environments, route the input and output traces on opposite sides of the IC and avoid parallel runs with switching converter traces. Add a 100 nF X7R bypass capacitor on the input within 3 mm of the IN pin for high-frequency decoupling.
コンプライアンス情報
AEC-Q100 qualified per Infineon product page. RoHS compliant. Halogen-free status not confirmed from provided data.
