Infineon

TLE8458GUV33XUMA1 - LIN Transceiver with 5V Regulator | Infineon

部品番号: TLE8458GUV33XUMA1 ✓ 生産中
Maximum 2 % Vdss PG-DSO-8-16, 8 pins Package
MOQ: 1 |

TLE8458GUV33XUMA1 概要

The Infineon TLE8458GUV33XUMA1 is an automotive LIN transceiver with an integrated 5 V voltage regulator, designed for 1/1 LIN bus communication in compact DSO-8 surface-mount assemblies. The device combines a LIN physical-layer transceiver, integrated voltage regulation, and the supporting functions required for distributed automotive and industrial LIN networks. Its nominal regulated output is 5 V, and the device is identified for use in LIN bus systems operating at 10.4 kBd.

A LIN transceiver is a physical-layer interface IC that connects a microcontroller or other host controller to a single-wire LIN network. LIN, or Local Interconnect Network, is a low-cost automotive communication bus used for distributed body, comfort, sensor, and actuator electronics. The TLE8458 family integrates the communications interface with a regulator so a compact module can obtain its local supply and communicate over the same board without a separate discrete transceiver and regulator.

The key application parameters are the integrated 5 V regulator, 10.4 kBd LIN data rate, 1/1 transceiver configuration, and 8-pin DSO-8-16 package. The package is also described in component listings as an 8-SOIC package, with a gull-wing surface-mount form factor. This combination makes the device appropriate for compact LIN nodes where board area, wiring simplicity, and local power regulation are important.

The Infineon TLE8458GUV33XUMA1 is positioned for 5 V LIN nodes in automotive electronics, vehicle body modules, seat and door controls, climate-control peripherals, sensor interfaces, and compact industrial LIN networks. The integrated regulator reduces the number of external power components and can simplify the local power architecture, while the transceiver handles the physical communication interface.

When laying out a board, keep the LIN connection and regulator return paths short, provide the required decoupling close to the device, and follow the manufacturer’s recommended external components. Verify the exact pin assignments, electrical limits, output tolerance, and thermal conditions against the Infineon TLE8458 datasheet before production release.

This page consolidates the manufacturer-family description, distributor identification, packaging details, application context, and practical engineering considerations for engineers evaluating the TLE8458GUV33XUMA1 in LIN-based electronic systems.

ドロップイン代替品: TLE8458GUV33XUMA1 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

TLE8458GUV33XUMA2

✅ ドロップイン ⚠️ 仕様未検証
📦 PG-DSO-8-16
Same TLE8458 family and 8-pin DSO package; final ordering suffix may change qualification or delivery parameters

📋 参考代替品(カタログ未掲載)

TLE8458GUV33XA

✅ ドロップイン ⚠️ 仕様未検証
📦 PG-DSO-8-16
Same TLE8458 family with reduced ordering-suffix detail; confirm temperature grade and qualification against the datasheet

📋 参考代替品(カタログ未掲載)

TLE8458GUV33XUMA1

✅ ドロップイン ⚠️ 仕様未検証
Infineon
📦 PG-DSO-8-16
LIN transceiver with integrated voltage regulator · 10.4 kBd · 1/1 transceiver · 5 V · Maximum 2 % · 3.234 V · PG-DSO-8-16, 8 pins · 8-SOIC / DSO-8 surface-mount package

価格はお問い合わせください

データシートを見る →

TLE8458GUV33XUMA1 最大定格&電気的特性

Product Type LIN transceiver with integrated voltage regulator
LIN Bus Data Rate 10.4 kBd
Transceiver Configuration 1/1 transceiver
Integrated Regulator Output 5 V
Output Voltage Tolerance Maximum 2 %
Minimum Output Voltage 3.234 V
パッケージ PG-DSO-8-16, 8 pins
Package Family 8-SOIC / DSO-8 surface-mount package
Terminal Count 8 terminals
Terminal Form Gull wing
実装タイプ Surface mount

TLE8458GUV33XUMA1 8-soic / dso-8 surface-mount package ピン配置ガイド

TLE8458GUV33XUMA1 (8-soic / dso-8 surface-mount package パッケージ) のピン配置。 このパワーデバイスは、ゲート、ドレイン、ソース端子を備えています。非極性パッケージの場合、正確なピン1の向きとフットプリントの詳細については、メーカーのデータシートを参照してください。主な用途には、電源設計、モータ駆動、負荷スイッチングがあります。

TLE8458GUV33XUMA1 の 8-soic / dso-8 surface-mount package パッケージピン配置図

詳細なピン配置データはありません: TLE8458GUV33XUMA1.

詳細は データシート をご参照ください。

主な用途

TLE8458GUV33XUMA1 の用途: 6 件s: Automotive Door Control Module, Vehicle Seat Control Electronics, Automotive Climate-Control Peripheral, Distributed Automotive Sensor Interface, LIN-Connected Actuator Controller, Industrial LIN Sensor Network.

🚗

Automotive Door Control Module

The TLE8458GUV33XUMA1 fits compact door-control electronics that need both a LIN bus connection and a local regulated supply. Its 1/1 LIN interface operates at 10.4 kBd, matching the communication rate used by distributed vehicle body networks, while the integrated 5 V regulator provides power for the module’s local logic or sensor circuitry. Combining these functions can reduce board partitioning and wiring. The 8-pin PG-DSO-8-16 package also supports automated surface-mount assembly in space-constrained electronic control units. Use the manufacturer’s recommended LIN bus protection and bypass components around the device, and confirm the full automotive temperature and qualification requirements before production use.

🚗

Vehicle Seat Control Electronics

Seat control modules commonly combine position sensing, motor control, and a low-speed network connection. The TLE8458GUV33XUMA1 can provide the physical LIN interface at 10.4 kBd and a 5 V local supply for associated control electronics. This integration is useful when the ECU must communicate with a central body controller over a single-wire LIN network without allocating separate board area for a discrete regulator and physical-layer transceiver. The package’s eight gull-wing terminals are practical for compact automotive PCBs, but designers should maintain the recommended trace geometry and protection components around the external LIN connection.

🚗

Automotive Climate-Control Peripheral

A climate-control peripheral can use the TLE8458GUV33XUMA1 as its LIN node interface when it must exchange commands and sensor status with a central controller. The device’s 10.4 kBd LIN capability is appropriate for slow supervisory communication rather than high-bandwidth payloads. Its integrated 5 V regulator helps power nearby low-voltage circuitry, simplifying the power partition inside the peripheral. The design should still include adequate decoupling and a controlled return path, especially if motors, heaters, or fan drivers share the same enclosure. Verify electromagnetic compatibility, ambient temperature, and load-current requirements against the Infineon TLE8458 documentation before releasing the module.

🧩

Distributed Automotive Sensor Interface

The TLE8458GUV33XUMA1 is suitable for a compact LIN-connected sensor node that reports measurements to a vehicle controller. Its 1/1 transceiver arrangement supports communication over a single-wire LIN bus, while the integrated 5 V regulator provides a local supply for sensing and signal-conditioning electronics. The 8-pin DSO-8-16 package helps limit PCB footprint in dense wiring harnesses. For reliable operation, place the bypass network near the regulator pins, keep the LIN route compact, and apply the manufacturer’s recommended protection arrangement. Confirm the sensor’s electrical load and the vehicle network’s fault-management requirements before integration.

🏭

LIN-Connected Actuator Controller

The TLE8458GUV33XUMA1 can serve as the communication interface for a LIN-connected actuator controller. A host controller uses the LIN physical layer to receive commands, while the actuator’s driver circuitry operates from a local supply. Integrating the 5 V regulator with the transceiver simplifies the low-power side of the design and can reduce component count. The 10.4 kBd rate is suitable for command and status traffic rather than closed-loop motion data. Designers should account for switching transients from the actuator driver, separate sensitive transceiver returns where appropriate, and validate the final network against the manufacturer’s reference recommendations.

🏭

Industrial LIN Sensor Network

The TLE8458GUV33XUMA1 can support compact distributed sensor modules in an industrial LIN network that uses the same low-speed single-wire communication concept as automotive LIN. Its 10.4 kBd interface handles supervisory data exchange, and the integrated 5 V regulator supplies local sensing circuitry. The 8-pin surface-mount package is useful in space-constrained instrument housings. Industrial deployment requires review of the device’s specified operating voltage and temperature limits, as well as EMC and network fault tolerance. Add the application-appropriate transient protection and bypass components and confirm them against the manufacturer datasheet before production.

What is the TLE8458GUV33XUMA1?
The TLE8458GUV33XUMA1 is an Infineon LIN transceiver with an integrated 5 V voltage regulator, supplied in an 8-pin DSO-8-16 package. According to the Infineon TLE8458 datasheet, the device combines a 1/1 LIN physical-layer interface with local power regulation for compact LIN nodes. It is intended for single-wire LIN networks operating up to 10.4 kBd and is used in automotive body, comfort, sensor, and actuator electronics.
What LIN data rate does TLE8458GUV33XUMA1 support?
The TLE8458GUV33XUMA1 supports LIN communication at 10.4 kBd. The Infineon TLE8458 family documentation identifies the device as a LIN transceiver with integrated voltage regulator. This rate is suitable for low-speed distributed automotive networks, where one master coordinates communication with multiple slave nodes. The exact timing, break-detection, and baud-rate implementation should be confirmed in the manufacturer datasheet.
What package does TLE8458GUV33XUMA1 use?
The TLE8458GUV33XUMA1 uses the PG-DSO-8-16 8-pin surface-mount package, also described by distributors as an 8-SOIC package with gull-wing terminals. The manufacturer TLE8458 datasheet identifies the package family, while distributor records provide the ordering and terminal details. Use the package drawing and land pattern from the manufacturer datasheet when placing the PCB footprint.
Does TLE8458GUV33XUMA1 include a voltage regulator?
Yes. The TLE8458GUV33XUMA1 includes an integrated 5 V voltage regulator alongside the LIN transceiver. This allows the device to provide a local regulated supply to nearby circuitry in a LIN node. The regulator output is identified as fixed 5 V with a maximum voltage tolerance of 2 %, while the minimum listed output voltage is 3.234 V.
Where can I download the TLE8458GUV33XUMA1 datasheet?
Download the TLE8458 datasheet PDF from the linked datasheet source or use the Infineon TLE8458 family documentation. The available TLE8458 datasheet is a 31-page document describing a LIN transceiver with an integrated voltage regulator. Use the manufacturer document for definitive pin names, electrical limits, timing characteristics, recommended external components, and package dimensions.
Where is the TLE8458GUV33XUMA1 pinout?
The TLE8458GUV33XUMA1 pinout is found in the Infineon TLE8458 datasheet, including the PG-DSO-8-16 package drawing and pin-description table. The device has eight pins, so its complete pin list must include pins 1 through 8. Assign PCB tracks from the manufacturer pin table rather than relying on package orientation alone.
What is the TLE8458GUV33XUMA1 used for in automotive systems?
The TLE8458GUV33XUMA1 is used for compact LIN nodes in automotive body and comfort electronics, including door, seat, climate, sensor, and actuator subsystems. Its integrated 5 V regulator supplies local circuitry, while its 1/1 LIN interface connects the module to the vehicle network. The Infineon TLE8458 family positioning matches these distributed low-speed control applications.
Can TLE8458GUV33XUMA1 be used in industrial LIN networks?
The TLE8458GUV33XUMA1 can be used in compact industrial LIN networks when the application satisfies the device’s electrical and environmental requirements. Its 10.4 kBd LIN interface and integrated 5 V regulator suit distributed sensors and actuators connected through a single-wire bus. Review the operating voltage, temperature range, EMC behavior, and LIN network specifications before industrial deployment.
What is the difference between a LIN transceiver and a LIN controller?
A LIN transceiver converts logic-level signals into the physical single-wire LIN bus waveform and receives the returning bus signal. A LIN controller generates and interprets frames, manages protocol timing, and handles communication faults. The TLE8458GUV33XUMA1 performs the physical-layer transceiver function and also provides an integrated 5 V regulator; it does not replace the host microcontroller’s LIN protocol implementation.
How should the TLE8458GUV33XUMA1 be decoupled on a PCB?
Place the recommended regulator and transceiver bypass capacitors close to their corresponding device pins, using short ground returns and a low-impedance supply path. Follow the Infineon TLE8458 datasheet for capacitor values, tolerances, ESR requirements, and layout. The LIN bus trace should be kept as short as practical, with the bus return and protective-network geometry implemented according to the application reference design.
What is the best drop-in replacement for TLE8458GUV33XUMA1?
The best drop-in replacement must use the same 8-pin DSO-8-16 footprint, preserve pin-to-pin functions, and provide equivalent LIN and 5 V regulator ratings. No verified cross-reference candidate in the manufacturer-family records establishes five drop-in options for this exact ordering code. Use the manufacturer’s newer TLE8458 ordering variants only after checking their suffix, temperature grade, and electrical specifications against the original datasheet.
Is TLE8458GUV33XUMA1 the same as TLE8458GUV33XUMA2?
The TLE8458GUV33XUMA1 and TLE8458GUV33XUMA2 are not automatically interchangeable because their final ordering suffixes can identify different qualification, temperature, or delivery variants. Both belong to the TLE8458 family and use the PG-DSO-8-16 package, but package identity alone does not establish full drop-in equivalence. Compare the manufacturer ordering information, pinout, electrical ratings, and qualification status before substitution.
When should I choose TLE8458GUV33XUMA1 instead of a separate regulator and LIN transceiver?
Choose the TLE8458GUV33XUMA1 when board area, component count, and wiring simplicity justify integrating a 5 V regulator with a 1/1 LIN interface. The combined device can simplify a compact LIN node compared with separate regulator and transceiver implementations. Keep a discrete solution when independent supply control, different bus timing, enhanced protection, or a different regulator specification is required.
Where can I buy TLE8458GUV33XUMA1 and check current lead time?
Use the Request a Quote form on this page to request the TLE8458GUV33XUMA1, current availability, MOQ, and lead time. XAIPART can also confirm the correct package, ordering suffix, and delivery quantity for your design. The request form is the appropriate route for current commercial information because stock and lead time can change by region and order quantity.
What is the price of TLE8458GUV33XUMA1?
Current commercial pricing for the TLE8458GUV33XUMA1 should be requested through the Request a Quote form on this page. The form can confirm the quantity, delivery package, target region, and current lead time for the exact MPN. This avoids publishing a stale price while still allowing procurement teams to compare the part against their approved sourcing baseline.
Is TLE8458GUV33XUMA1 in stock?
The TLE8458GUV33XUMA1 is identified by distributor listings as an orderable Infineon component, but current stock should be confirmed through the Request a Quote form on this page. Availability can vary by package, region, and quantity. Submit the required quantity and delivery schedule so the current manufacturing and distribution status can be reviewed.
What are the key specifications of TLE8458GUV33XUMA1 that engineers should know?
The key specifications are a 1/1 LIN transceiver configuration, 10.4 kBd bus rate, integrated 5 V regulator, maximum 2 % output-voltage tolerance, and PG-DSO-8-16 8-pin surface-mount package. The Infineon TLE8458 datasheet is the primary source for operating voltage, temperature range, transceiver electrical limits, pin functions, and recommended external components. Use those limits for schematic and PCB qualification.

エンジニアリング参考データ: TLE8458GUV33XUMA1 — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the TLE8458GUV33XUMA1 when designing a compact LIN node that benefits from an integrated 5 V regulator and a 1/1 physical-layer transceiver in an 8-pin DSO package. It is particularly suitable for distributed automotive body, comfort, sensor, and actuator electronics operating at the standard 10.4 kBd LIN rate. The TLE8458GUV33XUMA2 may be considered when its ordering-code temperature, qualification, or delivery parameters are preferable and the pinout and ratings remain equivalent. TLE8458GUV33XA and the shortened family ordering code should be treated as qualified alternatives only after their exact orderable configuration is confirmed. A discrete regulator and transceiver remain preferable when supply current, voltage, protection, timing, or production-qualification requirements exceed those of the integrated family. Verify every substitution against the manufacturer ordering information and datasheet before PCB release.

代替品との比較

パラメータ この製品 TLE8458GUV33XUMA2 TLE8458GUV33XA TLE8458GUV33XUMA1
Brand Infineon Technologies Infineon Technologies Infineon Technologies Infineon Technologies
Package PG-DSO-8-16, 8 pins PG-DSO-8-16, 8 pins PG-DSO-8-16, 8 pins PG-DSO-8-16, 8 pins
Product Type LIN transceiver with integrated voltage regulator LIN transceiver with integrated voltage regulator LIN transceiver with integrated voltage regulator LIN transceiver with integrated voltage regulator
LIN Bus Data Rate 10.4 kBd 10.4 kBd 10.4 kBd 10.4 kBd
Transceiver Configuration 1/1 1/1 1/1 1/1
Integrated Regulator Output 5 V 5 V 5 V 5 V
Terminal Count 8 terminals 8 terminals 8 terminals 8 terminals
Mounting Type Surface mount Surface mount Surface mount Surface mount

主な差別化要因

  • Combines the LIN interface and local regulator in one device (vs Discrete 5 V regulator plus LIN transceiver implementation)
  • Matches the standard 10.4 kBd LIN physical-layer rate (vs TLE8458GUV33XUMA2)
  • Uses a compact 8-pin surface-mount package (vs TLE8458GUV33XA)

設計ノート

Use the Infineon TLE8458 datasheet to select the input supply, output load, and external capacitors for the integrated 5 V regulator. Place the required bypass components directly beside the corresponding pins and use a short, low-impedance ground connection. Verify that the local load remains within the regulator’s specified output-current and thermal limits; these limits are not stated in the component listing.

Keep the LIN bus trace short and route it away from high-current switching nodes and sensitive analog signals. Follow the manufacturer’s recommended external protection arrangement, including the appropriate transceiver and bus components. A compact layout is useful in vehicle modules, but excessive trace length can increase coupling and susceptibility to transient events on the single-wire network.

Do not treat identical package dimensions as proof of drop-in equivalence. The final ordering suffix can change temperature grade, qualification, or delivery information, so compare the complete ordering table, pin descriptions, electrical limits, and package drawing before replacing the TLE8458GUV33XUMA1. Also distinguish this physical-layer transceiver from a LIN controller; a host microcontroller or dedicated protocol device is still required.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

Compliance and qualification attributes are not stated in the manufacturer-family description or distributor records. Confirm them from the exact ordering code in Infineon’s product documentation before release.

データ検証日: 2026-11-10 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

TLE8458GUV33XUMA1 datasheet TLE8458GUV33XUMA1 pinout TLE8458GUV33XUMA1 datasheet pdf TLE8458GUV33XUMA1 specifications TLE8458GUV33XUMA1 equivalent TLE8458GUV33XUMA1 replacement TLE8458GUV33XUMA1 cross reference TLE8458GUV33XUMA1 DSO-8 footprint Infineon TLE8458GUV33XUMA1 TLE8458GUV33XUMA1 LIN 10.4 kBd TLE8458GUV33XUMA1 automotive module TLE8458GUV33XUMA1 price TLE8458GUV33XUMA1 stock TLE8458GUV33XUMA1 vs TLE8458GUV33XUMA2 TLE8458GUV33XUMA1 application circuit

関連部品&用語

Infineon Technologies TLE8458GUV33XUMA1 TLE8458GUV33XUMA2 TLE8458GUV33XA LIN transceiver LIN bus Local Interconnect Network physical-layer interface integrated voltage regulator 5 V regulator 10.4 kBd 1/1 transceiver PG-DSO-8-16 8-SOIC QFN family surface mount SMD automotive electronics vehicle body electronics distributed sensor network gull-wing terminal semiconductor AEC-Q100 RoHS REACH
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示