TLV2455CD - 220kHz Low-Power RRIO Op Amp | Texas Instruments
部品番号: TLV2455CD ✓ 生産中TLV2455CD 概要
An operational amplifier is an analog signal-conditioning IC that amplifies the voltage difference between its two inputs. The TLV2455 belongs to the rail-to-rail input/output amplifier family within the broader operational amplifier, analog IC, and semiconductor hierarchies. Rail-to-rail input operation permits common-mode input voltages to approach the supply rails, while rail-to-rail output operation extends useful output swing toward both rails.
The TLV2455CD combines four amplifier channels with approximately 23 µA of supply consumption per channel and a 220 kHz gain-bandwidth product. These characteristics make it suitable for portable and low-power signal-processing systems in which a conventional higher-current amplifier would waste available power. The family also includes a shutdown function, allowing connected circuitry to reduce supply consumption when operation is not required.
The TLV2455 family operates from a 6 V maximum supply and is described by Texas Instruments as a low-quiescent-current amplifier family. Rail-to-rail input and output behavior is particularly useful when signals remain close to the positive or negative supply rail. Designers should still evaluate output swing, common-mode range, capacitive loading, and stability in the exact gain configuration rather than assuming ideal operation at the supply limits.
Typical uses include low-power sensor interfaces, buffered analog measurement circuits, portable instrumentation, battery-powered signal conditioning, and general-purpose analog amplification. The quad-channel configuration can reduce the number of packages required when a design needs several low-frequency or moderate-bandwidth amplifier stages, particularly when the individual channels do not require simultaneous operation.
A key design consideration is shutdown-state behavior and board-level power management. The shutdown pin should be driven with levels compatible with the device supply, and unused amplifier inputs must be returned to a valid common-mode potential rather than left floating. Input and output stability should be checked with the intended source impedance, load capacitance, feedback network, and PCB parasitics.
This product page combines the manufacturer’s device identity with package, performance, application, and replacement guidance. It also distinguishes electrically similar ordering options from true pin-compatible alternatives and highlights the design checks engineers should complete before assigning TLV2455CD to a new analog board.
ドロップイン代替品: TLV2455CD — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
TLV2455ID
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
TLV2455IP
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
TLV2455IT
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
TLV2455CDR
✅ ドロップイン📋 参考代替品(カタログ未掲載)
TLV2455CD 最大定格&電気的特性
| Amplifier Type | Quad general-purpose operational amplifier |
| Number of Amplifier Channels | 4 channels |
| Maximum Supply Voltage | 6 V |
| Quiescent Current per Channel | 23 µA |
| Gain-Bandwidth Product | 220 kHz |
| Input Common-Mode Range | Rail-to-rail |
| Output Swing | Rail-to-rail |
| Shutdown Function | Yes |
| Package Type | 16-pin SOIC |
| Package Mounting | Surface mount |
| Shipping Package | Tube |
| Product Category | General-purpose amplifier |
| Operating Supply Range | ±3 V / 6 V |
TLV2455CD tube ピン配置ガイド
TLV2455CD (tube パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: TLV2455CD.
詳細は データシート をご参照ください。
主な用途
TLV2455CD の用途: 6 件s: Battery-Powered Sensor Interface, Portable Instrumentation Signal Conditioning, Low-Power Voltage Reference Buffer, Industrial Sensor Acquisition, Audio and Communication Front Ends, Battery Monitoring and Protection.
Battery-Powered Sensor Interface
The TLV2455CD suits low-power sensor-conditioning stages because each amplifier consumes approximately 23 µA and supports rail-to-rail input/output operation from a 6 V supply. It can buffer sensor outputs, amplify small signals, and provide gain stages without requiring a higher-current amplifier family. The 220 kHz gain-bandwidth product supports moderate-frequency filtering and closed-loop amplification. Designers should verify the sensor’s output range, required common-mode range, and total channel current at the battery’s minimum voltage. Shutdown can also reduce consumption during measurement-idle periods, provided its logic timing is coordinated with the sensor.
おすすめ
Portable Instrumentation Signal Conditioning
The quad TLV2455CD provides four amplifier channels for portable measurement equipment where both analog conditioning and limited power consumption are important. At approximately 23 µA per channel and 220 kHz gain-bandwidth product, it fits low-frequency transducer, resistive-sensor, and general analog-conditioning stages. Rail-to-rail input and output behavior helps preserve signal margin when the operating range must remain close to the supply rails. The 16-pin SOIC also allows one package to implement several gain or filtering blocks, although each stage must be checked for gain-bandwidth and stability behavior at its intended operating frequency.
おすすめ
Low-Power Voltage Reference Buffer
The TLV2455CD can buffer a reference voltage or scale low-level analog signals where the source has limited drive capability. Rail-to-rail input operation is useful when the reference node approaches a supply rail, while the low quiescent current of approximately 23 µA per channel limits the burden on the powered source. The 220 kHz gain-bandwidth product is adequate for reference buffers and slow precision-control loops rather than high-speed sampling systems. Validate the buffer’s output accuracy, capacitive-load behavior, and settling requirements using the manufacturer’s recommended configuration and characteristics.
おすすめ
Industrial Sensor Acquisition
The TLV2455CD is appropriate for industrial sensing front ends that process low-bandwidth signals while keeping channel current low. Four rail-to-rail channels can condition outputs from multiple sensors or support gain, summation, and active-filter blocks in one 16-pin SOIC. The 220 kHz gain-bandwidth product supports moderate response times, but plant signals with substantial high-frequency content may require a faster amplifier. Industrial implementation should also account for the device’s specified operating-temperature limits, input protection strategy, grounding, and isolation from motor-switching noise before the amplifier is placed beside sensors.
おすすめ
Audio and Communication Front Ends
The TLV2455CD can perform low-level signal amplification and impedance buffering in audio or communication equipment that prioritizes low supply current over wideband performance. Rail-to-rail input/output operation improves usable signal range in low-voltage systems, while the 220 kHz gain-bandwidth product suits voice-band and other moderate-frequency paths. Each amplifier should be configured with feedback that preserves stability and bandwidth, and the output must remain within the required swing. For microphone, line, or interface stages with specified noise and distortion limits, compare the complete manufacturer characteristics rather than relying only on gain-bandwidth product.
おすすめ
Battery Monitoring and Protection
The TLV2455CD can support battery-cell monitoring, threshold comparison, and low-current analog control paths in portable power systems. Its approximately 23 µA per-channel quiescent current is attractive when every milliampere affects battery life, while the shutdown function allows a monitored system to disable its analog front end between readings. Rail-to-rail operation helps when sensing signals move across the usable supply range. Designers should confirm that the monitored voltage never exceeds the amplifier’s absolute maximum rating, include appropriate input protection, and evaluate channel shutdown leakage against the precision required by the battery-management algorithm.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: TLV2455CD — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | TLV2455ID | TLV2455IP | TLV2455IT | TLV2455CDR |
|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC |
| Amplifier Configuration | Quad | Quad | Quad | Quad | Quad |
| Maximum Supply Voltage | 6 V | 6 V | 6 V | 6 V | 6 V |
| Quiescent Current per Channel | 23 µA | 23 µA | 23 µA | 23 µA | 23 µA |
| Gain-Bandwidth Product | 220 kHz | 220 kHz | 220 kHz | 220 kHz | 220 kHz |
| Input Common-Mode Range | Rail-to-rail | Rail-to-rail | Rail-to-rail | Rail-to-rail | Rail-to-rail |
| Output Swing | Rail-to-rail | Rail-to-rail | Rail-to-rail | Rail-to-rail | Rail-to-rail |
| Shutdown Function | Yes | Yes | Yes | Yes | Yes |
主な差別化要因
- Combines four low-power channels in one package (vs MC3403DR)
- Low quiescent current supports portable analog conditioning (vs LM2902N/PB)
- Reel-delivery ordering option supports automated assembly (vs TLV2455ID)
設計ノート
Estimated: the four amplifier channels contribute approximately 4 × 23 µA = 92 µA of quiescent current before input-bias, load, and leakage effects. Calculate total battery load using the minimum and maximum supply-voltage conditions from the manufacturer characteristics, then include sensor and shutdown-control currents. The shutdown function can reduce consumption during inactive intervals, but its startup timing should not create repeated power surges in the surrounding system.
Route the four amplifier inputs, outputs, supply, ground, and shutdown connections to match the 16-pin SOIC pin description exactly. Place input and output decoupling capacitors close to their corresponding device pins, use a continuous ground reference beneath the package where layout rules permit, and keep sensitive high-impedance input traces away from switching nodes and the shutdown trace. The exposed thermal pad is not applicable to this standard SOIC, so thermal design relies on the package and board copper rather than an underside pad.
Validate each feedback network against the 220 kHz gain-bandwidth product and the intended closed-loop gain. Start with the gain and phase-margin information in the manufacturer datasheet, then check source impedance and load capacitance because either can affect stability. For capacitive sensor outputs or long cables, add an isolation resistor close to the amplifier input and simulate the complete network. Do not assume rail-to-rail output means the output reaches either supply rail exactly.
Do not leave unused amplifier inputs floating. Tie each unused non-inverting input to a valid common-mode voltage and connect unused output pins according to the manufacturer’s recommended configuration. Also verify that the shutdown-control voltage remains valid during power-up, power-down, and reset. Mistaking the CD tube ordering option for the CDR reel option is low risk electrically, but the complete ordering suffix and delivery format must still match the assembly plan.
コンプライアンス情報
The TLV2455 is a general-purpose commercial amplifier family; no specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations were identified in the product information. AEC-Q100 is not applicable to this non-automotive-qualified ordering option.