TLV2455CD - 220kHz Low-Power RRIO Op Amp | Texas Instruments
MPN: TLV2455CD ✓ فعالTLV2455CD جائزہ
An operational amplifier is an analog signal-conditioning IC that amplifies the voltage difference between its two inputs. The TLV2455 belongs to the rail-to-rail input/output amplifier family within the broader operational amplifier, analog IC, and semiconductor hierarchies. Rail-to-rail input operation permits common-mode input voltages to approach the supply rails, while rail-to-rail output operation extends useful output swing toward both rails.
The TLV2455CD combines four amplifier channels with approximately 23 µA of supply consumption per channel and a 220 kHz gain-bandwidth product. These characteristics make it suitable for portable and low-power signal-processing systems in which a conventional higher-current amplifier would waste available power. The family also includes a shutdown function, allowing connected circuitry to reduce supply consumption when operation is not required.
The TLV2455 family operates from a 6 V maximum supply and is described by Texas Instruments as a low-quiescent-current amplifier family. Rail-to-rail input and output behavior is particularly useful when signals remain close to the positive or negative supply rail. Designers should still evaluate output swing, common-mode range, capacitive loading, and stability in the exact gain configuration rather than assuming ideal operation at the supply limits.
Typical uses include low-power sensor interfaces, buffered analog measurement circuits, portable instrumentation, battery-powered signal conditioning, and general-purpose analog amplification. The quad-channel configuration can reduce the number of packages required when a design needs several low-frequency or moderate-bandwidth amplifier stages, particularly when the individual channels do not require simultaneous operation.
A key design consideration is shutdown-state behavior and board-level power management. The shutdown pin should be driven with levels compatible with the device supply, and unused amplifier inputs must be returned to a valid common-mode potential rather than left floating. Input and output stability should be checked with the intended source impedance, load capacitance, feedback network, and PCB parasitics.
This product page combines the manufacturer’s device identity with package, performance, application, and replacement guidance. It also distinguishes electrically similar ordering options from true pin-compatible alternatives and highlights the design checks engineers should complete before assigning TLV2455CD to a new analog board.
کے لیے ڈراپ اِن متبادل TLV2455CD — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
TLV2455ID
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
TLV2455IP
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
TLV2455IT
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
TLV2455CDR
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
TLV2455CD زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Amplifier Type | Quad general-purpose operational amplifier |
| Number of Amplifier Channels | 4 channels |
| Maximum Supply Voltage | 6 V |
| Quiescent Current per Channel | 23 µA |
| Gain-Bandwidth Product | 220 kHz |
| Input Common-Mode Range | Rail-to-rail |
| Output Swing | Rail-to-rail |
| Shutdown Function | Yes |
| Package Type | 16-pin SOIC |
| Package Mounting | Surface mount |
| Shipping Package | Tube |
| Product Category | General-purpose amplifier |
| Operating Supply Range | ±3 V / 6 V |
TLV2455CD tube پن کنفیگریشن گائیڈ
TLV2455CD (tube پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں TLV2455CD.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
TLV2455CD کے لیے موزوں ہے 6 ایپلیکیشنs: Battery-Powered Sensor Interface, Portable Instrumentation Signal Conditioning, Low-Power Voltage Reference Buffer, Industrial Sensor Acquisition, Audio and Communication Front Ends, Battery Monitoring and Protection.
Battery-Powered Sensor Interface
The TLV2455CD suits low-power sensor-conditioning stages because each amplifier consumes approximately 23 µA and supports rail-to-rail input/output operation from a 6 V supply. It can buffer sensor outputs, amplify small signals, and provide gain stages without requiring a higher-current amplifier family. The 220 kHz gain-bandwidth product supports moderate-frequency filtering and closed-loop amplification. Designers should verify the sensor’s output range, required common-mode range, and total channel current at the battery’s minimum voltage. Shutdown can also reduce consumption during measurement-idle periods, provided its logic timing is coordinated with the sensor.
تجویز کردہ
Portable Instrumentation Signal Conditioning
The quad TLV2455CD provides four amplifier channels for portable measurement equipment where both analog conditioning and limited power consumption are important. At approximately 23 µA per channel and 220 kHz gain-bandwidth product, it fits low-frequency transducer, resistive-sensor, and general analog-conditioning stages. Rail-to-rail input and output behavior helps preserve signal margin when the operating range must remain close to the supply rails. The 16-pin SOIC also allows one package to implement several gain or filtering blocks, although each stage must be checked for gain-bandwidth and stability behavior at its intended operating frequency.
تجویز کردہ
Low-Power Voltage Reference Buffer
The TLV2455CD can buffer a reference voltage or scale low-level analog signals where the source has limited drive capability. Rail-to-rail input operation is useful when the reference node approaches a supply rail, while the low quiescent current of approximately 23 µA per channel limits the burden on the powered source. The 220 kHz gain-bandwidth product is adequate for reference buffers and slow precision-control loops rather than high-speed sampling systems. Validate the buffer’s output accuracy, capacitive-load behavior, and settling requirements using the manufacturer’s recommended configuration and characteristics.
تجویز کردہ
Industrial Sensor Acquisition
The TLV2455CD is appropriate for industrial sensing front ends that process low-bandwidth signals while keeping channel current low. Four rail-to-rail channels can condition outputs from multiple sensors or support gain, summation, and active-filter blocks in one 16-pin SOIC. The 220 kHz gain-bandwidth product supports moderate response times, but plant signals with substantial high-frequency content may require a faster amplifier. Industrial implementation should also account for the device’s specified operating-temperature limits, input protection strategy, grounding, and isolation from motor-switching noise before the amplifier is placed beside sensors.
تجویز کردہ
Audio and Communication Front Ends
The TLV2455CD can perform low-level signal amplification and impedance buffering in audio or communication equipment that prioritizes low supply current over wideband performance. Rail-to-rail input/output operation improves usable signal range in low-voltage systems, while the 220 kHz gain-bandwidth product suits voice-band and other moderate-frequency paths. Each amplifier should be configured with feedback that preserves stability and bandwidth, and the output must remain within the required swing. For microphone, line, or interface stages with specified noise and distortion limits, compare the complete manufacturer characteristics rather than relying only on gain-bandwidth product.
تجویز کردہ
Battery Monitoring and Protection
The TLV2455CD can support battery-cell monitoring, threshold comparison, and low-current analog control paths in portable power systems. Its approximately 23 µA per-channel quiescent current is attractive when every milliampere affects battery life, while the shutdown function allows a monitored system to disable its analog front end between readings. Rail-to-rail operation helps when sensing signals move across the usable supply range. Designers should confirm that the monitored voltage never exceeds the amplifier’s absolute maximum rating, include appropriate input protection, and evaluate channel shutdown leakage against the precision required by the battery-management algorithm.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا TLV2455CD — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | TLV2455ID | TLV2455IP | TLV2455IT | TLV2455CDR |
|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC |
| Amplifier Configuration | Quad | Quad | Quad | Quad | Quad |
| Maximum Supply Voltage | 6 V | 6 V | 6 V | 6 V | 6 V |
| Quiescent Current per Channel | 23 µA | 23 µA | 23 µA | 23 µA | 23 µA |
| Gain-Bandwidth Product | 220 kHz | 220 kHz | 220 kHz | 220 kHz | 220 kHz |
| Input Common-Mode Range | Rail-to-rail | Rail-to-rail | Rail-to-rail | Rail-to-rail | Rail-to-rail |
| Output Swing | Rail-to-rail | Rail-to-rail | Rail-to-rail | Rail-to-rail | Rail-to-rail |
| Shutdown Function | Yes | Yes | Yes | Yes | Yes |
اہم امتیازی خصوصیات
- Combines four low-power channels in one package (بمقابلہMC3403DR)
- Low quiescent current supports portable analog conditioning (بمقابلہLM2902N/PB)
- Reel-delivery ordering option supports automated assembly (بمقابلہTLV2455ID)
ڈیزائن نوٹس
Estimated: the four amplifier channels contribute approximately 4 × 23 µA = 92 µA of quiescent current before input-bias, load, and leakage effects. Calculate total battery load using the minimum and maximum supply-voltage conditions from the manufacturer characteristics, then include sensor and shutdown-control currents. The shutdown function can reduce consumption during inactive intervals, but its startup timing should not create repeated power surges in the surrounding system.
Route the four amplifier inputs, outputs, supply, ground, and shutdown connections to match the 16-pin SOIC pin description exactly. Place input and output decoupling capacitors close to their corresponding device pins, use a continuous ground reference beneath the package where layout rules permit, and keep sensitive high-impedance input traces away from switching nodes and the shutdown trace. The exposed thermal pad is not applicable to this standard SOIC, so thermal design relies on the package and board copper rather than an underside pad.
Validate each feedback network against the 220 kHz gain-bandwidth product and the intended closed-loop gain. Start with the gain and phase-margin information in the manufacturer datasheet, then check source impedance and load capacitance because either can affect stability. For capacitive sensor outputs or long cables, add an isolation resistor close to the amplifier input and simulate the complete network. Do not assume rail-to-rail output means the output reaches either supply rail exactly.
Do not leave unused amplifier inputs floating. Tie each unused non-inverting input to a valid common-mode voltage and connect unused output pins according to the manufacturer’s recommended configuration. Also verify that the shutdown-control voltage remains valid during power-up, power-down, and reset. Mistaking the CD tube ordering option for the CDR reel option is low risk electrically, but the complete ordering suffix and delivery format must still match the assembly plan.
تعمیل کی معلومات
The TLV2455 is a general-purpose commercial amplifier family; no specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations were identified in the product information. AEC-Q100 is not applicable to this non-automotive-qualified ordering option.