Texas Instruments

TLV2455CD - 220kHz Low-Power RRIO Op Amp | Texas Instruments

MPN: TLV2455CD ✓ Hoạt động
6 V Vdss 23 µA Id 16-pin SOIC Package
MOQ: 1 |

TLV2455CD Tóm tắt

The Texas Instruments TLV2455CD is a quad, low-power, rail-to-rail input/output operational amplifier with a 6 V maximum supply, 220 kHz gain-bandwidth product, and approximately 23 µA quiescent current per channel. The device is packaged in a 16-pin SOIC and is identified as a standard general-purpose amplifier.

An operational amplifier is an analog signal-conditioning IC that amplifies the voltage difference between its two inputs. The TLV2455 belongs to the rail-to-rail input/output amplifier family within the broader operational amplifier, analog IC, and semiconductor hierarchies. Rail-to-rail input operation permits common-mode input voltages to approach the supply rails, while rail-to-rail output operation extends useful output swing toward both rails.

The TLV2455CD combines four amplifier channels with approximately 23 µA of supply consumption per channel and a 220 kHz gain-bandwidth product. These characteristics make it suitable for portable and low-power signal-processing systems in which a conventional higher-current amplifier would waste available power. The family also includes a shutdown function, allowing connected circuitry to reduce supply consumption when operation is not required.

The TLV2455 family operates from a 6 V maximum supply and is described by Texas Instruments as a low-quiescent-current amplifier family. Rail-to-rail input and output behavior is particularly useful when signals remain close to the positive or negative supply rail. Designers should still evaluate output swing, common-mode range, capacitive loading, and stability in the exact gain configuration rather than assuming ideal operation at the supply limits.

Typical uses include low-power sensor interfaces, buffered analog measurement circuits, portable instrumentation, battery-powered signal conditioning, and general-purpose analog amplification. The quad-channel configuration can reduce the number of packages required when a design needs several low-frequency or moderate-bandwidth amplifier stages, particularly when the individual channels do not require simultaneous operation.

A key design consideration is shutdown-state behavior and board-level power management. The shutdown pin should be driven with levels compatible with the device supply, and unused amplifier inputs must be returned to a valid common-mode potential rather than left floating. Input and output stability should be checked with the intended source impedance, load capacitance, feedback network, and PCB parasitics.

This product page combines the manufacturer’s device identity with package, performance, application, and replacement guidance. It also distinguishes electrically similar ordering options from true pin-compatible alternatives and highlights the design checks engineers should complete before assigning TLV2455CD to a new analog board.

Bộ thay thế dễ dàng lắp đặt cho TLV2455CD — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

TLV2455ID

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 16-pin SOIC
Same TLV2455 family and 16-pin SOIC architecture; temperature-grade and ordering suffix differ, while the core 6 V and 220 kHz performance class remains

📋 Tham chiếu thay thế (không có trong danh mục)

TLV2455IP

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 16-pin SOIC
Same TLV2455 family and 16-pin SOIC architecture; ordering and temperature-grade suffix differ without changing the core 6 V and 220 kHz performance class

📋 Tham chiếu thay thế (không có trong danh mục)

TLV2455IT

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 16-pin SOIC
Same TLV2455 family and 16-pin SOIC architecture; commercial temperature-grade suffix differs while retaining the 6 V supply and 220 kHz performance class

📋 Tham chiếu thay thế (không có trong danh mục)

TLV2455CDR

✅ Drop-In
📦 16-pin SOIC
Same 16-pin SOIC device and electrical architecture as TLV2455CD; reel delivery replaces the tube packaging, with no stated change to the core 6 V and 220 kHz ratings

📋 Tham chiếu thay thế (không có trong danh mục)

TLV2455CD Tỷ lệ tối đa & tính chất điện

Amplifier Type Quad general-purpose operational amplifier
Number of Amplifier Channels 4 channels
Maximum Supply Voltage 6 V
Quiescent Current per Channel 23 µA
Gain-Bandwidth Product 220 kHz
Input Common-Mode Range Rail-to-rail
Output Swing Rail-to-rail
Shutdown Function Yes
Package Type 16-pin SOIC
Package Mounting Surface mount
Shipping Package Tube
Product Category General-purpose amplifier
Operating Supply Range ±3 V / 6 V

Hướng dẫn cấu hình chân TLV2455CD tube

Cấu hình chân cho TLV2455CD (tube gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.

Bảng cấu hình chân tube cho TLV2455CD

Không có dữ liệu chân cụ thể sẵn có cho TLV2455CD.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

TLV2455CD phù hợp cho 6 Áp dụngs: Battery-Powered Sensor Interface, Portable Instrumentation Signal Conditioning, Low-Power Voltage Reference Buffer, Industrial Sensor Acquisition, Audio and Communication Front Ends, Battery Monitoring and Protection.

🔋

Battery-Powered Sensor Interface

The TLV2455CD suits low-power sensor-conditioning stages because each amplifier consumes approximately 23 µA and supports rail-to-rail input/output operation from a 6 V supply. It can buffer sensor outputs, amplify small signals, and provide gain stages without requiring a higher-current amplifier family. The 220 kHz gain-bandwidth product supports moderate-frequency filtering and closed-loop amplification. Designers should verify the sensor’s output range, required common-mode range, and total channel current at the battery’s minimum voltage. Shutdown can also reduce consumption during measurement-idle periods, provided its logic timing is coordinated with the sensor.

🖥️

Portable Instrumentation Signal Conditioning

The quad TLV2455CD provides four amplifier channels for portable measurement equipment where both analog conditioning and limited power consumption are important. At approximately 23 µA per channel and 220 kHz gain-bandwidth product, it fits low-frequency transducer, resistive-sensor, and general analog-conditioning stages. Rail-to-rail input and output behavior helps preserve signal margin when the operating range must remain close to the supply rails. The 16-pin SOIC also allows one package to implement several gain or filtering blocks, although each stage must be checked for gain-bandwidth and stability behavior at its intended operating frequency.

🔧

Low-Power Voltage Reference Buffer

The TLV2455CD can buffer a reference voltage or scale low-level analog signals where the source has limited drive capability. Rail-to-rail input operation is useful when the reference node approaches a supply rail, while the low quiescent current of approximately 23 µA per channel limits the burden on the powered source. The 220 kHz gain-bandwidth product is adequate for reference buffers and slow precision-control loops rather than high-speed sampling systems. Validate the buffer’s output accuracy, capacitive-load behavior, and settling requirements using the manufacturer’s recommended configuration and characteristics.

🏭

Industrial Sensor Acquisition

The TLV2455CD is appropriate for industrial sensing front ends that process low-bandwidth signals while keeping channel current low. Four rail-to-rail channels can condition outputs from multiple sensors or support gain, summation, and active-filter blocks in one 16-pin SOIC. The 220 kHz gain-bandwidth product supports moderate response times, but plant signals with substantial high-frequency content may require a faster amplifier. Industrial implementation should also account for the device’s specified operating-temperature limits, input protection strategy, grounding, and isolation from motor-switching noise before the amplifier is placed beside sensors.

🎧

Audio and Communication Front Ends

The TLV2455CD can perform low-level signal amplification and impedance buffering in audio or communication equipment that prioritizes low supply current over wideband performance. Rail-to-rail input/output operation improves usable signal range in low-voltage systems, while the 220 kHz gain-bandwidth product suits voice-band and other moderate-frequency paths. Each amplifier should be configured with feedback that preserves stability and bandwidth, and the output must remain within the required swing. For microphone, line, or interface stages with specified noise and distortion limits, compare the complete manufacturer characteristics rather than relying only on gain-bandwidth product.

⚡

Battery Monitoring and Protection

The TLV2455CD can support battery-cell monitoring, threshold comparison, and low-current analog control paths in portable power systems. Its approximately 23 µA per-channel quiescent current is attractive when every milliampere affects battery life, while the shutdown function allows a monitored system to disable its analog front end between readings. Rail-to-rail operation helps when sensing signals move across the usable supply range. Designers should confirm that the monitored voltage never exceeds the amplifier’s absolute maximum rating, include appropriate input protection, and evaluate channel shutdown leakage against the precision required by the battery-management algorithm.

What is the operating voltage of TLV2455CD?
The TLV2455CD supports operation from a single 6 V supply or from dual supplies of ±3 V. Texas Instruments describes the TLV2455 as a 6 V rail-to-rail input/output operational amplifier family. The device’s rail-to-rail input and output characteristics make it appropriate for low-voltage systems whose signal levels can approach either supply rail. Confirm the complete electrical limits and operating-temperature range against the manufacturer datasheet before finalizing a production design.
What are the key specifications of TLV2455CD that engineers should know?
The TLV2455CD is a quad operational amplifier specified for a 6 V maximum supply, 220 kHz gain-bandwidth product, approximately 23 µA quiescent current per channel, and rail-to-rail input/output operation. It is offered in a 16-pin SOIC package with a shutdown function. According to the Texas Instruments TLV2455 product page, the combination of low supply current and AC performance is the family’s principal differentiator for portable and low-power analog designs.
Where to download the TLV2455CD datasheet PDF?
The official TLV2455CD datasheet is available through Texas Instruments at https://www.ti.com/lit/gpn/TLV2455. The document covers the TLV2455 quad rail-to-rail input/output operational-amplifier family, including its 6 V supply capability, 220 kHz gain-bandwidth product, approximately 23 µA per-channel quiescent current, shutdown operation, electrical characteristics, and application information. Use the manufacturer’s pin-description table and package drawing when assigning PCB connections.
Where can I find the TLV2455CD pinout and package information?
The TLV2455CD pinout is documented in the Texas Instruments TLV2455 datasheet and product page. The device uses a 16-pin SOIC package with four operational-amplifier channels and a family-level shutdown function. Use the pin-description table in the manufacturer datasheet when assigning inputs, outputs, supply pins, shutdown control, and ground connections. The 16-pin SOIC footprint should not be inferred from other quad amplifiers without checking pin functions.
What can replace TLV2455CD?
The closest same-family choices are orderable TLV2455 variants that retain the 16-pin SOIC footprint, but a replacement must still be checked for shutdown behavior, supply limits, performance grade, and temperature range. Cross-brand substitutions should be selected only after confirming the complete pinout and electrical characteristics. The TLV2455 family page and manufacturer cross-reference resources are appropriate starting points, while the Request a Quote form on this page can be used to ask about replacement sourcing.
Is TLV2455CD the same as TLV2455CDR?
TLV2455CD and TLV2455CDR refer to closely related ordering configurations in the same TLV2455 family, but the suffix controls the delivery form. The TLV2455CD listing identifies a 16-pin SOIC supplied in a tube, whereas TLV2455CDR is associated with reel ordering. For PCB compatibility, both are 16-pin SOIC devices, but engineers should verify the exact pin functions, temperature grade, and ordering details in the manufacturer documentation before substituting one for the other.
TLV2455CD vs TLV2455AIDR: which is better for a low-power design?
TLV2455CD and TLV2455AIDR belong to the same low-power, 220 kHz TLV245x family, but they are not automatically interchangeable because the package and ordering options differ. The TLV2455CD is identified in a 16-pin SOIC tube, while the TLV2455AIDR comparison result identifies a different ordering configuration. Choose the device only after matching the physical footprint, shutdown pin, supply range, temperature grade, and electrical limits against the target schematic.
When should I choose TLV2455CD over another low-power quad op amp?
Choose TLV2455CD when a design needs four rail-to-rail input/output channels, a 6 V maximum supply, a 220 kHz gain-bandwidth product, and approximately 23 µA of quiescent current per channel in a 16-pin SOIC. It is particularly suitable for portable instrumentation and low-power analog signal conditioning. Select an alternative only when its supply range, bandwidth, input/output behavior, shutdown logic, package, and temperature grade satisfy the complete design requirements.
Is TLV2455CD suitable for battery-powered sensor interfaces?
The TLV2455CD is suitable for many battery-powered sensor-interface stages because it combines rail-to-rail input/output operation with approximately 23 µA of quiescent current per channel. Its 220 kHz gain-bandwidth product is appropriate for low-frequency conditioning and moderate-bandwidth filtering rather than demanding high-speed closed-loop applications. Check sensor output swing, total amplifier current, shutdown behavior, and the input common-mode range at the battery’s minimum and maximum voltages.
Where to buy TLV2455CD online?
Use the Request a Quote form on this page to request TLV2455CD availability, current commercial terms, and lead time. The manufacturer product page identifies the device as part of the TLV2455 family, while distributor listings confirm the exact 16-pin SOIC ordering configuration. Because inventory, packaging, and delivery schedules change, the quote form provides a single current response for the exact MPN rather than an outdated availability claim.
What is the price of TLV2455CD?
The current TLV2455CD commercial price should be obtained through the Request a Quote form on this page. The exact cost can vary with order quantity, tube or reel packaging, supply status, and delivery terms. The structured pricing area on the product page reflects the applicable pricing mode, and a quote request ensures that the response is tied to the exact 16-pin SOIC ordering code TLV2455CD.
What is the lead time for TLV2455CD?
The current lead time for TLV2455CD should be requested through the Request a Quote form on this page. Lead time may vary with the selected delivery package, order quantity, component availability, and quality or sourcing requirements. The manufacturer lists the TLV2455 family on its official product page, but a firm allocation date must be confirmed for the exact TLV2455CD ordering configuration.
Is TLV2455CD in stock?
TLV2455CD availability should be confirmed through the Request a Quote form on this page for the exact quantity and delivery format. The product is identified as a 16-pin SOIC tube ordering option, and distributors list the component, but inventory levels change continuously. A current quote response should state available quantity, packaging choice, expected lead time, and any lifecycle or sourcing constraints relevant to the production schedule.
What is the best Texas Instruments equivalent for TLV2455CD?
The most direct Texas Instruments alternatives are other TLV2455 ordering variants that use the same 16-pin SOIC footprint and preserve the four-channel architecture, shutdown function, 6 V supply capability, and 220 kHz performance class. For example, TLV2455CDR offers a reel-delivery form of the same basic device family. Verify the exact suffix-specific temperature rating and pin compatibility before substitution; a packaging-only change should not replace a functional or grade review.
What is the best cross-brand equivalent for TLV2455CD?
A cross-brand equivalent should be selected only after verifying that it has four amplifiers in the same 16-pin SOIC pinout, a compatible shutdown function, at least the required 6 V supply capability, rail-to-rail input/output behavior, and comparable 220 kHz bandwidth. The manufacturer cross-reference search is the appropriate place to check current candidates. Do not assume that a generic quad rail-to-rail op amp is drop-in compatible because the shutdown and supply pins must also match.
How much power does the TLV2455CD consume?
The TLV2455CD consumes approximately 23 µA per channel under the manufacturer’s specified quiescent-current conditions. With four channels, the base quiescent-current contribution is therefore approximately 92 µA before accounting for load current, input-bias effects, and shutdown-state behavior. Use the manufacturer’s characteristic curves for supply-current changes across input voltage and temperature when calculating battery life for a complete circuit.
Does TLV2455CD support shutdown?
Yes, the TLV2455 family includes a shutdown function. Shutdown can lower supply consumption when the analog signal chain does not need to remain active, which is useful in portable systems and duty-cycled instrumentation. The shutdown pin should be driven using valid logic levels referenced to the device supply, and the circuit should be checked for the intended high-impedance state and startup sequence. Consult the manufacturer pin-description table before connecting the control signal.

Dữ liệu tham khảo kỹ thuật cho TLV2455CD — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose TLV2455CD for a low-power design that needs four rail-to-rail input/output amplifiers, a 6 V maximum supply, approximately 23 µA of quiescent current per channel, and a 220 kHz gain-bandwidth product in a 16-pin SOIC. It is a strong fit for portable instrumentation, battery-powered sensing, and low-frequency analog conditioning where four channels can share one package and shutdown can control power use. Select TLV2455CDR when automated assembly requires reel delivery while retaining the same basic family architecture. TLV2455ID, TLV2455IP, and TLV2455IT are same-family ordering options that require suffix-specific temperature and delivery review. If the design needs substantially faster settling, lower offset voltage, greater output current, or a different pinout, choose a different amplifier rather than assuming generic rail-to-rail compatibility. Always verify the manufacturer’s complete pinout, operating-temperature limits, stability conditions, and absolute maximum ratings before substitution.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này TLV2455ID TLV2455IP TLV2455IT TLV2455CDR
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC
Amplifier Configuration Quad Quad Quad Quad Quad
Maximum Supply Voltage 6 V 6 V 6 V 6 V 6 V
Quiescent Current per Channel 23 µA 23 µA 23 µA 23 µA 23 µA
Gain-Bandwidth Product 220 kHz 220 kHz 220 kHz 220 kHz 220 kHz
Input Common-Mode Range Rail-to-rail Rail-to-rail Rail-to-rail Rail-to-rail Rail-to-rail
Output Swing Rail-to-rail Rail-to-rail Rail-to-rail Rail-to-rail Rail-to-rail
Shutdown Function Yes Yes Yes Yes Yes

Bảo phân biệt quan trọng

  • Combines four low-power channels in one package (vsMC3403DR)
  • Low quiescent current supports portable analog conditioning (vsLM2902N/PB)
  • Reel-delivery ordering option supports automated assembly (vsTLV2455ID)

Ghi chú thiết kế

Estimated: the four amplifier channels contribute approximately 4 × 23 µA = 92 µA of quiescent current before input-bias, load, and leakage effects. Calculate total battery load using the minimum and maximum supply-voltage conditions from the manufacturer characteristics, then include sensor and shutdown-control currents. The shutdown function can reduce consumption during inactive intervals, but its startup timing should not create repeated power surges in the surrounding system.

Route the four amplifier inputs, outputs, supply, ground, and shutdown connections to match the 16-pin SOIC pin description exactly. Place input and output decoupling capacitors close to their corresponding device pins, use a continuous ground reference beneath the package where layout rules permit, and keep sensitive high-impedance input traces away from switching nodes and the shutdown trace. The exposed thermal pad is not applicable to this standard SOIC, so thermal design relies on the package and board copper rather than an underside pad.

Validate each feedback network against the 220 kHz gain-bandwidth product and the intended closed-loop gain. Start with the gain and phase-margin information in the manufacturer datasheet, then check source impedance and load capacitance because either can affect stability. For capacitive sensor outputs or long cables, add an isolation resistor close to the amplifier input and simulate the complete network. Do not assume rail-to-rail output means the output reaches either supply rail exactly.

Do not leave unused amplifier inputs floating. Tie each unused non-inverting input to a valid common-mode voltage and connect unused output pins according to the manufacturer’s recommended configuration. Also verify that the shutdown-control voltage remains valid during power-up, power-down, and reset. Mistaking the CD tube ordering option for the CDR reel option is low risk electrically, but the complete ordering suffix and delivery format must still match the assembly plan.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The TLV2455 is a general-purpose commercial amplifier family; no specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations were identified in the product information. AEC-Q100 is not applicable to this non-automotive-qualified ordering option.

Dữ liệu được xác minh vào: 2026-11-15 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

TLV2455CD datasheet TLV2455CD pinout TLV2455CD datasheet pdf Texas Instruments TLV2455CD TLV2455CD 220kHz amplifier TLV2455CD 23uA per channel TLV2455CD 16-SOIC TLV2455CD rail-to-rail op amp TLV2455CD replacement TLV2455CD equivalent TLV2455CD price TLV2455CD stock TLV2455CD low power sensor interface TLV2455CD vs TLV2455CDR

Các bộ phận và thuật ngữ liên quan

Texas Instruments TLV2455CD TLV2455ID TLV2455IP TLV2455IT TLV2455CDR TLV2455 family quad operational amplifier rail-to-rail input amplifier rail-to-rail output amplifier low-power amplifier analog signal-conditioning IC semiconductor 16-pin SOIC SOIC package family surface-mount package 220 kHz gain-bandwidth product 23 µA quiescent current 6 V supply voltage shutdown function battery-powered sensor interface portable instrumentation industrial signal conditioning audio signal amplification
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ