Texas Instruments

TLV2762ID - Dual 1.8V 500kHz RRIO Op Amp | Texas Instruments

部品番号: TLV2762ID ✓ 生産中
1.8 V Vdss Approximately 20 microampere per amplifier Id 8-pin SOIC, 0.154 inch (3.90 mm) wide Package
MOQ: 1 |

TLV2762ID 概要

The Texas Instruments TLV2762ID is a dual, micropower, rail-to-rail input and output operational amplifier designed for single-supply systems operating from 1.8 V to 3.6 V. It combines 500 kHz gain-bandwidth product, approximately 20 microampere quiescent current, and rail-to-rail operation in an 8-pin SOIC package. These characteristics make the TLV2762ID suitable for portable instrumentation, battery-powered sensing, low-power signal conditioning, and mixed-voltage interfaces.

An operational amplifier is a voltage-amplifying building block that uses high open-loop gain to control an output over a wide input range. Rail-to-rail input amplifiers accept signals close to the positive and negative supply rails, while rail-to-rail outputs can swing close to those limits under typical load conditions. Within the amplifier hierarchy, the TLV2762 belongs to the micropower operational-amplifier family and provides two amplifiers in one package for space-constrained designs.

Key features include a 1.8 V minimum operating supply, 500 kHz bandwidth, approximately 20 microampere quiescent current, and rail-to-rail input and output capability. The low quiescent current limits the supply current drawn when both amplifiers operate continuously, making the device appropriate for portable equipment that spends significant time monitoring low-frequency sensor signals rather than processing high-bandwidth waveforms.

The TLV2762ID combines a speed-versus-power balance that is useful in general-purpose signal chains. A 500 kHz gain-bandwidth product supports moderate closed-loop gains while retaining a compact, low-power implementation. Because the device operates from a single positive supply down to 1.8 V, it can be powered directly from low-energy systems without a negative rail. Designers should still check input and output common-mode limits, capacitive-load stability, output-current capability, and the exact operating limits in the manufacturer datasheet before fixing the circuit.

Typical uses include low-voltage sensor amplifiers, portable measurement systems, current-sense signal conditioning, audio preamplification, and interface buffering. The 8-pin SOIC outline also supports standard surface-mount assembly and hand-soldering workflows. In designs where output noise or channel matching is more important than bandwidth, an application-specific dual amplifier with integrated filtering may provide a better system fit.

A practical design rule is to keep input, feedback, and decoupling connections short, then verify stability with the actual source impedance and load capacitance. Place the supply-bypass capacitor close to the positive rail pin and route the ground return directly to the device ground pin. If the amplifier drives a long cable, ADC input, or capacitive load, add an isolation resistor close to the output and confirm settling behavior with oscilloscope measurements.

This page combines the manufacturer product information, distributor listings, pin-level guidance, drop-in alternatives, and application-focused design notes to support faster component selection and PCB planning.

ドロップイン代替品: TLV2762ID — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: TLV2762ID (同一形状・フットプリント) — 相違点: Operating Temperature Range, Package, Gain-Bandwidth Product, Input Bias Current, Maximum Supply Voltage.

Texas Instruments
Operating Temperature Range: -40 C to +125 C
Package: 8-pin SOIC
Gain-Bandwidth Product: 3 MHz
比較対象 TLV2762ID →
Texas Instruments
Operating Temperature Range: 0 °C to +70 °C
Package: 8-pin SOIC
Input Bias Current: 15 pA typical
比較対象 TLV2762ID →

TLV271IDR

✅ ドロップイン
Texas Instruments
📦 8-pin SOIC (0.154 inch, 3.90 mm width)
Single CMOS operational amplifier · 1 · 16 V · 2.7 V to 16 V · 3 MHz · 2.4 V/us · 550 uA/channel · 550 nV/Hz

価格はお問い合わせください

データシートを見る →

TLV2762UIP

✅ ドロップイン ⚠️ 仕様未検証
📦 8-pin SOIC (0.154 inch, 3.90 mm width)
Same TLV2762 core amplifier performance in an 8-pin SOIC ordering option, with different reel or packing designation

📋 参考代替品(カタログ未掲載)

TLV2762UID

✅ ドロップイン ⚠️ 仕様未検証
📦 8-pin SOIC (0.154 inch, 3.90 mm width)
Same TLV2762 core amplifier performance in an 8-pin SOIC ordering option, with a different reel or packing designation

📋 参考代替品(カタログ未掲載)

TLV2762ID 最大定格&電気的特性

Amplifier Type Dual general-purpose operational amplifier
Number of Circuits 2 circuits
Minimum Supply Voltage 1.8 V
Maximum Supply Voltage 3.6 V
Gain-Bandwidth Product 500 kHz
静止電流 Approximately 20 microampere per amplifier
Input Common-Mode Range Rail-to-rail
Output Swing Rail-to-rail
Supply Type Single supply
パッケージ 8-pin SOIC, 0.154 inch (3.90 mm) wide
実装タイプ Surface mount
動作温度範囲 Industrial temperature range

TLV2762ID ピン構成

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
ピン 1 OUTA — Channel A output
ピン 2 INA- — Channel A inverting input
ピン 3 INA+ — Channel A non-inverting input
ピン 4 V+ — Positive supply voltage
ピン 5 INB+ — Channel B non-inverting input
ピン 6 INB- — Channel B inverting input
ピン 7 OUTB — Channel B output
ピン 8 V- — Negative supply or ground connection

主な用途

TLV2762ID の用途: 6 件s: Battery-Powered Sensor Conditioning, Portable Instrumentation Signal Conditioning, Low-Voltage Current-Sense Amplification, Audio Preamplifier and Interface Buffer, Single-Supply ADC Interface, Industrial Control and Automation I/O.

🔋

Battery-Powered Sensor Conditioning

The TLV2762ID fits low-energy sensor front ends because it operates from 1.8 V and consumes approximately 20 microampere per amplifier. One channel can amplify a resistive sensor bridge or thermistor signal while the other performs filtering or level conditioning before an ADC. Rail-to-rail inputs help preserve signal headroom near the supply rails, and the 500 kHz gain-bandwidth product supports moderate closed-loop gains. Check input bias current against the sensor impedance to prevent gain errors, and place the bypass capacitor close to pin 4.

🖥️

Portable Instrumentation Signal Conditioning

The TLV2762ID is appropriate for compact handheld instruments that combine analog measurement with low-voltage digital processing. Its dual architecture supports two independent gain or buffer stages without requiring two packages, while the 8-pin SOIC footprint simplifies surface-mount assembly. The 1.8 V minimum supply and approximately 20 microampere quiescent current per amplifier support energy-limited operation, and 500 kHz bandwidth accommodates many low-frequency pressure, flow, or position sensors. Validate noise performance against the required measurement resolution.

⚡

Low-Voltage Current-Sense Amplification

The TLV2762ID can amplify the small voltage generated across a low-value shunt resistor in a 1.8 V supply system. Rail-to-rail input capability preserves common-mode range when the shunt signal lies close to the positive rail, and the 500 kHz gain-bandwidth product supports higher-bandwidth current control than a purely micropower slow amplifier. Keep the Kelvin sense connections short and symmetrical, and verify amplifier input offset against the smallest current level that must be resolved.

🎧

Audio Preamplifier and Interface Buffer

The TLV2762ID can serve as a low-voltage audio preamplifier or impedance buffer in portable headphones, microphones, and small speakers. Its dual-channel configuration allows a stereo pair of signals to be processed in one package, and rail-to-rail output capability improves voltage utilization at 1.8 V to 3.6 V. The 500 kHz bandwidth covers audio-band signals, although system noise, input bias current, and load stability determine practical performance. Add series isolation resistance when driving capacitive inputs.

📊

Single-Supply ADC Interface

The TLV2762ID is useful as a rail-to-rail buffer between analog sensors and a low-voltage ADC input. Buffering prevents the sensor source impedance from degrading ADC acquisition time, while the dual package can handle two channels or combine an active filter with a driver. Operation from 1.8 V to 3.6 V allows direct interfacing with modern low-power converters and ADCs. Confirm ADC input range, acquisition requirements, and capacitive loading before finalizing the external filter and isolation resistance.

🏭

Industrial Control and Automation I/O

The TLV2762ID can condition low-level analog control signals in compact industrial automation modules powered from low-voltage rails. Rail-to-rail inputs help handle sensor outputs near the supply limits, while 500 kHz bandwidth is sufficient for many slow feedback loops and monitoring channels. The approximately 20 microampere quiescent current per amplifier reduces the penalty of continuous analog monitoring. Confirm the industrial temperature range, EMC requirements, and isolation strategy against the enclosure and cable environment.

What is the TLV2762ID?
The TLV2762ID is a dual, 1.8 V minimum-supply, rail-to-rail input and output operational amplifier with a 500 kHz gain-bandwidth product. According to the Texas Instruments TLV2762 product page, it draws approximately 20 microampere per amplifier and is offered in an 8-pin SOIC package. It is designed for low-voltage, low-power signal-conditioning systems that need two amplifier channels in one package.
What is the operating voltage range of the TLV2762ID?
The TLV2762ID operates from a single 1.8 V to 3.6 V supply. The 1.8 V minimum makes it suitable for coin-cell, portable-instrumentation, and low-energy sensing systems. According to Texas Instruments, the amplifier provides rail-to-rail input and output behavior within this single-supply range. Always verify the detailed input common-mode and output-swing limits against the manufacturer datasheet for the selected operating point.
What is the bandwidth and quiescent current of the TLV2762ID?
The TLV2762ID provides a 500 kHz gain-bandwidth product while operating from approximately 20 microampere per amplifier. Texas Instruments describes the device as a micropower operational amplifier, making it suitable for low-frequency sensor conditioning where continuous power consumption matters more than high closed-loop bandwidth. Its combination of modest speed and low supply current supports compact battery-powered instrumentation.
Where can I download the TLV2762ID datasheet PDF?
The official TLV2762 documentation is available through the Texas Instruments product page at https://www.ti.com/product/TLV2762. Select the TLV2762ID ordering option to view the applicable data sheet and ordering information. The pin configuration, electrical characteristics, and recommended operating conditions should be taken from the device-specific manufacturer document rather than from a third-party mirror.
Where can I find the TLV2762ID pinout?
The TLV2762ID uses an 8-pin SOIC arrangement with two complete operational-amplifier channels. The standard pin sequence is OUTA on pin 1, INA- on pin 2, INA+ on pin 3, V+ on pin 4, INB+ on pin 5, INB- on pin 6, OUTB on pin 7, and V- on pin 8. Use the pin-description table in the manufacturer datasheet when assigning PCB tracks.
Can the TLV2762ID be used with a 1.8 V supply?
Yes, the TLV2762ID is specified for single-supply operation beginning at 1.8 V. Texas Instruments identifies the TLV2762 as a 1.8 V micropower rail-to-rail amplifier, allowing operation directly from low-voltage system rails. Ensure the input signal, output swing, and load remain inside the recommended operating conditions for the chosen supply voltage.
What is the TLV2762ID best suited for?
The TLV2762ID is best suited to low-power sensor amplification, portable measurement, signal buffering, and general-purpose single-supply analog signal conditioning. Its approximately 20 microampere quiescent current per channel reduces continuous power demand, while 500 kHz bandwidth covers moderate-frequency signals. It is less appropriate for wideband video, high-speed data conversion, or applications requiring very low offset voltage without calibration.
When should I choose the TLV2762ID instead of the TLV271IDR?
Choose the TLV2762ID when 500 kHz bandwidth and rail-to-rail operation in an 8-pin SOIC outline are important, and choose the TLV271IDR when its lower-power or offset-voltage characteristics better match the design. Both are dual, single-supply amplifier families offered in 8-pin SOIC packages, but their bandwidth, quiescent current, and offset specifications differ. Review both datasheets before treating either device as a substitute.
Is the TLV2762ID the same as the TLV271IDR?
No, the TLV2762ID and TLV271IDR are related dual operational amplifiers but they are not identical devices. The TLV2762 is characterized by a 500 kHz gain-bandwidth product and approximately 20 microampere quiescent current, while the TLV271 family has its own speed, power, and offset-voltage characteristics. The TLV271IDR can share the 8-pin SOIC footprint, but signal-integrity and bias requirements must be revalidated.
What can replace the TLV2762ID?
The TLV271IDR is a same-manufacturer 8-pin SOIC candidate that can be considered when its lower-power or offset-voltage performance is acceptable. However, it is not an exact functional match because bandwidth and quiescent current differ. For a production substitution, compare input bias current, offset voltage, common-mode range, output swing, noise, stability, and system timing rather than relying on package matching alone.
Is the TLV2762ID suitable for battery-powered sensor circuits?
Yes, the TLV2762ID is suitable for battery-powered sensor circuits because it operates from 1.8 V and consumes approximately 20 microampere per amplifier. The dual configuration allows one channel to condition a sensor while the other performs filtering or an interface function. A low-power system should also account for sensor leakage, ADC reference current, and the load current drawn outside the op-amp itself.
Where can I buy the TLV2762ID online?
Use the Request a Quote form on this page to request current availability, order quantities, and commercial terms for the TLV2762ID. The manufacturer identifies the device as an active member of the TLV2762 family, while authorized distribution channels also list the part. Confirm the exact 8-pin SOIC ordering code and the current lead time when placing the order.
What is the price of the TLV2762ID?
The current unit price and quantity-break pricing for the TLV2762ID are presented through the structured purchasing options on this page. Use the Request a Quote form to obtain a current quotation, minimum order quantity, and available volume breaks. Pricing changes with market conditions and order quantity, so confirm the final amount at the time of purchase.
What is the lead time for the TLV2762ID?
The current lead time and minimum order quantity for the TLV2762ID should be confirmed through the Request a Quote form on this page. Texas Instruments lists the TLV2762 family as active, and distributor listings show the TLV2762ID as a standard catalog part. Procurement lead time can vary with order volume, packaging selection, and current component availability.
Is the TLV2762ID in stock?
The TLV2762ID is an active catalog device listed by Texas Instruments and offered through major distribution channels, but live inventory changes continuously. Submit the exact MPN through the Request a Quote form on this page to confirm current stock, supported package variants, and scheduled delivery. A listing marked as purchasable on a distributor page should not be treated as a guaranteed inventory reservation.
What are the key specifications of TLV2762ID that engineers should know?
The key TLV2762ID specifications are its dual-channel configuration, 1.8 V to 3.6 V single-supply operation, 500 kHz gain-bandwidth product, approximately 20 microampere quiescent current per amplifier, and rail-to-rail input and output behavior. It is packaged in an 8-pin SOIC. According to the Texas Instruments TLV2762 product page, these characteristics position it for low-voltage, low-power analog signal conditioning.

エンジニアリング参考データ: TLV2762ID — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the TLV2762ID for portable or battery-powered circuits that need two rail-to-rail amplifier channels, a 1.8 V minimum supply, approximately 20 microampere quiescent current per channel, and 500 kHz bandwidth in an 8-pin SOIC package. It is particularly suitable for sensor conditioning, low-voltage ADC interfaces, audio preamplification, and compact industrial control modules.

Consider the TLV271IDR when its lower-power or offset-voltage characteristics provide a better match, but verify the bandwidth and quiescent-current changes against the original design. The TLV2762UIP and TLV2762UID offer the same core TLV2762 amplifier performance in an 8-pin SOIC outline when their specific ordering and packing formats fit the assembly process. For all candidates, check common-mode range, output swing, noise, input bias current, capacitive-load stability, and temperature-range requirements before approving a substitution.

代替品との比較

パラメータ この製品 TLV271IDR TLV2762UIP TLV2762UID
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 8-pin SOIC 8-pin SOIC - same footprint 8-pin SOIC - same footprint 8-pin SOIC - same footprint
Amplifier Configuration Dual Dual Dual Dual
Mounting Type Surface mount Surface mount Surface mount Surface mount

主な差別化要因

  • 500 kHz speed within a micropower dual amplifier (vs TLV271IDR)
  • Dual low-power rail-to-rail signal conditioning in one package (vs TLV271IDR)
  • Single-supply operation down to 1.8 V (vs TLV2762UIP)

設計ノート

Place the supply-bypass capacitor immediately beside pin 4, and connect pin 8 to the ground plane with a short, low-impedance return path. Keep the two non-inverting inputs, the two inverting inputs, and their feedback components away from switching nodes and motor-current paths. Because the TLV2762ID is a 500 kHz micropower amplifier, long PCB traces can add parasitic capacitance and reduce stability margin.

When driving an ADC, cable, or other capacitive load, place a small isolation resistor directly at the amplifier output and keep the feedback connection close to the device. Increase resistance only as needed to preserve settling time, and confirm the output does not oscillate under the worst-case cable capacitance. Verify the signal against the full common-mode and output-swing ranges at the lowest intended supply voltage.

Do not treat rail-to-rail input as an unlimited input range, and do not assume the output can reach either supply rail under every load. The TLV2762ID also operates as a single-supply device, so pin 8 is normally tied to ground. Check input bias current against high-impedance sensors, input offset against the smallest signal of interest, and output-current demand against the intended load before releasing the layout.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The TLV2762 is an industrial-temperature-range general-purpose operational amplifier. RoHS, REACH, lead-free, and halogen-free status require confirmation from the current manufacturer product documentation or declaration.

関連検索

TLV2762ID TLV2762ID datasheet TLV2762ID datasheet pdf TLV2762ID pinout TLV2762ID specifications TLV2762ID equivalent TLV2762ID replacement TLV2762ID vs TLV271IDR TLV2762ID 8-SOIC footprint Texas Instruments TLV2762ID TLV2762ID low voltage sensor amplifier TLV2762ID price TLV2762ID stock TLV2762 schematic

関連部品&用語

Texas Instruments TLV2762ID TLV2762 TLV271IDR TLV2762UIP TLV2762UID operational amplifier dual amplifier micropower amplifier rail-to-rail input rail-to-rail output single-supply amplifier low-dropout architecture gain-bandwidth product quiescent current input offset voltage common-mode range 8-pin SOIC SOIC package family surface mount SMD package sensor signal conditioning ADC interface current-sense amplifier industrial electronics
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示