Texas Instruments

TLV2771ID - 5.1 MHz, 10.5 V/us Rail-to-Rail Op Amp | TI

部品番号: TLV2771ID ✓ 生産中
5.5 V Vdss 1 mA Id 8-SOIC Package
MOQ: 1 |

TLV2771ID 概要

The Texas Instruments TLV2771ID is a single, 5.5 V, 5.1 MHz operational amplifier with a 10.5 V/us slew rate and rail-to-rail output, housed in an 8-pin SOIC package. The low-voltage CMOS device combines a 2.7 V minimum supply, approximately 1 mA supply current per channel, and rail-to-rail output capability for compact, high-speed analog signal-conditioning systems.

An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its inverting and non-inverting inputs. The TLV2771 belongs to the CMOS operational-amplifier hierarchy, where low supply voltage, low power consumption, and moderate-to-high bandwidth support portable, industrial, communications, and sensor-interface applications. Its rail-to-rail output lets the output approach the supply rails more closely than a conventional fixed-output amplifier.

Three defining performance characteristics are the 5.1 MHz gain-bandwidth product, 10.5 V/us slew rate, and approximately 1 mA supply current per channel. The bandwidth supports higher-frequency closed-loop designs, while the slew rate determines how quickly the output can move through signal transitions. The single-amplifier configuration also reduces board area and power consumption compared with using a dual or quad package when only one amplifier is required.

The TLV2771 family combines high slew rate and bandwidth with rail-to-rail output swing and high output drive. These characteristics make the device useful in active filters, signal buffers, level translators, transducers, and low-voltage analog front ends. Its CMOS implementation is particularly appropriate when low quiescent power and operation from a compact supply are more important than the very lowest input offset voltage available from precision bipolar amplifiers.

Typical uses include sensor signal conditioning, communications-channel interfaces, audio and control-signal paths, industrial acquisition modules, and portable instrumentation. The 5.1 MHz bandwidth provides useful margin for moderate-frequency active filtering, while the 10.5 V/us slew rate improves large-signal response compared with slower general-purpose CMOS amplifiers. The 8-SOIC package supports conventional surface-mount assembly and thermal copper patterns.

When designing around the TLV2771ID, account for output-swing limits under load, input common-mode range, capacitive-load stability, and shutdown-pin logic. Place bypass capacitance close to the supply pins, preserve the manufacturer-recommended feedback topology, and verify settling time at the intended closed-loop gain. These checks are especially important when driving ADC front ends, long interconnects, or capacitive sensor outputs.

This product record combines the device's principal electrical characteristics, package and thermal details, pin-location guidance, application-specific design guidance, and same-footprint alternatives. It also highlights practical selection trade-offs involving shutdown operation, bandwidth, slew rate, supply current, and input precision so engineers can determine whether the TLV2771ID matches both the electrical and mechanical requirements of a new design.

ドロップイン代替品: TLV2771ID — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: TLV2771ID (同一形状・フットプリント) — 相違点: Package, Slew Rate, Gain-Bandwidth Product, Maximum Supply Voltage, Product Type.

Texas Instruments
Package: 8-pin SOIC
Slew Rate: 2.4 V/us
Gain-Bandwidth Product: 3 MHz
比較対象 TLV2771ID →
Texas Instruments
Package: 8-pin SOIC, 3.9 mm nominal body width
Slew Rate: 10.5 V/µs
Product Type: Single operational amplifier
比較対象 TLV2771ID →

TLV2771CD

✅ ドロップイン
Texas Instruments
📦 8-SOIC
Single operational amplifier · 5.5 V · 2.7 V · 5.1 MHz · 10.5 V/µs · Rail-to-rail output · 1 circuit · 8-pin SOIC, 3.9 mm nominal body width

価格はお問い合わせください

データシートを見る →

TLV272IDR

✅ ドロップイン
📦 8-SOIC
Same 8-SOIC footprint; bandwidth, slew rate, offset, and shutdown differences are not quantified

📋 参考代替品(カタログ未掲載)

TLV271IDR

✅ ドロップイン
Texas Instruments
📦 8-SOIC
Single CMOS operational amplifier · 1 · 16 V · 2.7 V to 16 V · 3 MHz · 2.4 V/us · 550 uA/channel · 550 nV/Hz

価格はお問い合わせください

データシートを見る →

TLV2771ID 最大定格&電気的特性

Amplifier Type Single operational amplifier
Number of Channels 1 circuit
Technology CMOS operational amplifier
Maximum Supply Voltage 5.5 V
Minimum Supply Voltage 2.7 V
Gain-Bandwidth Product 5.1 MHz
Slew Rate 10.5 V/us
Supply Current Per Channel 1 mA
出力タイプ Rail-to-rail output
Shutdown Function Present
動作温度範囲 -40 C to +125 C
パッケージ 8-SOIC
実装タイプ Surface mount
Product Status Active

TLV2771ID 8-soic ピン配置ガイド

TLV2771ID (8-soic パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。

TLV2771ID の 8-soic パッケージピン配置図

詳細なピン配置データはありません: TLV2771ID.

詳細は データシート をご参照ください。

主な用途

TLV2771ID の用途: 6 件s: Low-Voltage Sensor Signal Conditioning, Communications Signal Interface, Active Filtering and Control Loops, Portable Measurement and Monitoring, Audio and Low-Level Analog Paths, ADC and Digital Interface Buffering.

🧩

Low-Voltage Sensor Signal Conditioning

The TLV2771ID fits low-voltage sensor front ends that require a compact amplifier with more bandwidth than a slow precision-oriented device. Its 5.1 MHz gain-bandwidth product supports moderate-frequency closed-loop operation, while the 10.5 V/us slew rate allows the output to follow faster input transitions. With approximately 1 mA supply current per channel and operation from 2.7 V, it can buffer resistive, current-output, or low-level sensing elements without creating a large supply-demand burden. Place the amplifier in a conventional noninverting or inverting configuration, and verify that the sensor output remains inside the input common-mode range. The complete signal path should also be checked for sensor noise, offset drift, filter stability, and settling before conversion by an ADC.

🌐

Communications Signal Interface

The TLV2771ID is appropriate for communications and industrial interface stages that need higher slew rate than a general-purpose low-power amplifier. Its 10.5 V/us slew rate helps preserve large-signal transitions, and the 5.1 MHz gain-bandwidth product provides margin for modest filtering and buffering functions. The approximately 1 mA operating current per channel is useful in distributed or portable interface equipment. Use the amplifier to condition logic-level signals, bridge sensor outputs, or buffer a communications transceiver where the signal remains within the common-mode range. Validate attenuation, logic-level thresholds, channel bandwidth, crosstalk, output loading, and shutdown timing for the actual communication protocol. A powered-down input state must also meet the receiver’s requirement for a valid inactive level.

🏭

Active Filtering and Control Loops

The TLV2771ID can implement active filters and servo-style control loops that benefit from its 5.1 MHz gain-bandwidth product and 10.5 V/us slew rate. These characteristics provide useful speed margin in second-order filters, error amplifiers, and waveform-shaping stages while keeping operating current near 1 mA per channel. The amplifier should be compensated according to the selected noise gain and load, particularly when driving ADC inputs, long cables, or capacitive loads. Evaluate phase margin, closed-loop gain, output swing, and expected component tolerances before production. For filters with stringent amplitude or phase accuracy, include amplifier offset, bias-current effects, and temperature drift in the error budget rather than relying only on nominal bandwidth and slew-rate figures.

📱

Portable Measurement and Monitoring

The TLV2771ID suits portable measurement modules where a 2.7 V minimum supply and approximately 1 mA supply current are valuable, but the signal path still needs faster dynamics than an ultra-low-power amplifier provides. Its 5.1 MHz gain-bandwidth product can support precision-input buffering, threshold detection, and active gain stages, while the 10.5 V/us slew rate improves response to transients. Use suitable input protection and filtering because sensor leads can introduce ESD, motor noise, and capacitive loading. Confirm the amplifier’s common-mode range, output swing, and shutdown behavior across the full battery-voltage range. Low supply current alone does not establish total system power, so include quiescent current, load current, and shutdown leakage in the portable power budget.

🎧

Audio and Low-Level Analog Paths

The TLV2771ID can serve as a general-purpose amplifier in low-level audio or control paths where rail-to-rail output and fast transient response are important. The 10.5 V/us slew rate helps reduce slew-related distortion on changing waveforms, and the 5.1 MHz gain-bandwidth product provides more bandwidth than typical low-power audio stages. Its approximately 1 mA operating current supports compact analog sections, although the circuit must remain inside the amplifier’s specified input and output ranges. Establish the required gain, minimum signal level, output loading, and total harmonic distortion before selecting the device. In battery-powered audio equipment, shutdown control can reduce consumption during inactive intervals, but the shutdown input state and timing must be checked to prevent clicks or unwanted signal transients.

🖥️

ADC and Digital Interface Buffering

The TLV2771ID is useful as an ADC input buffer or digital-interface conditioning stage when the required bandwidth is moderate and operating current must remain low. Its 5.1 MHz gain-bandwidth product supports unity-gain or low-gain buffering, and the 10.5 V/us slew rate permits larger input transitions than a slow comparator-style amplifier. The rail-to-rail output helps preserve logic levels near the supply limits, subject to the actual output-swing specification and load current. Place the device close to the ADC or source to minimize trace pickup and add suitable bypass capacitance near the supply pins. Verify settling against the converter’s acquisition window, capacitive loading, kickback from the ADC, and shutdown timing so the output does not move unpredictably while the converter is sampling.

おすすめ製品の概要

TLV2771A Related single operational-amplifier family option 使用用途: Low-Voltage Sensor Signal Conditioning, Communications Signal Interface, Portable Measurement and Monitoring, Audio and Low-Level Analog Paths TLV2771CD Texas Instruments 使用用途: Low-Voltage Sensor Signal Conditioning, Active Filtering and Control Loops, Portable Measurement and Monitoring, ADC and Digital Interface Buffering TLV272IDR Related single operational-amplifier comparison 使用用途: Communications Signal Interface, Audio and Low-Level Analog Paths TLV271IDR Texas Instruments 使用用途: Active Filtering and Control Loops, ADC and Digital Interface Buffering
What is the operating voltage of TLV2771ID?
The TLV2771ID operates from 2.7 V to 5.5 V, making it suitable for low-voltage analog systems. According to the Texas Instruments TLV2771 product page, the device is a single 5.5 V operational amplifier that combines a 2.7 V minimum supply with rail-to-rail output capability. Confirm the complete operating range, common-mode limits, and supply tolerance against the manufacturer datasheet before using it with a regulated rail near either boundary.
What are the key specifications of TLV2771ID that engineers should know?
The principal TLV2771ID specifications are a 5.1 MHz gain-bandwidth product, 10.5 V/us slew rate, and approximately 1 mA supply current per channel. Texas Instruments describes the device as a single CMOS operational amplifier with a 2.7 V minimum supply and 5.5 V maximum supply. It is offered in an 8-SOIC package and includes shutdown functionality, making it useful for compact signal-conditioning circuits requiring both speed and low supply current.
Where can I download the TLV2771ID datasheet PDF?
The official TLV2771ID documentation is available through the Texas Instruments TLV2771 product page at https://www.ti.com/product/TLV2771. From that page, select the device documentation for the exact orderable MPN and download the manufacturer datasheet PDF. Use the TLV2771ID ordering table and pin-description section when assigning PCB nets, especially for the supply, shutdown, input, output, and exposed functions shown in the package drawing.
Where can I find the TLV2771ID pinout?
The TLV2771ID pinout is published in the pin-configuration section of the Texas Instruments TLV2771 datasheet and in the device documentation accessible from the official product page. The TLV2771ID uses an 8-SOIC package, so verify all eight terminal assignments against the manufacturer drawing before fabrication. The 8-SOIC footprint library diagram provides package orientation, while the datasheet remains the authoritative source for every signal name and connection.
Is TLV2771ID suitable for high-speed signal conditioning applications?
Yes, the TLV2771ID is suitable for moderate-frequency, high-slew-rate signal conditioning. Its 5.1 MHz gain-bandwidth product and 10.5 V/us slew rate provide the operating margin needed for filters, buffers, and level-shifting stages that must handle faster transitions than a slow general-purpose amplifier. Actual signal fidelity depends on the selected gain, feedback network, output loading, and input signal amplitude, so verify settling and distortion at the operating frequency.
What is the TLV2771ID slew rate and bandwidth?
The TLV2771ID provides a 10.5 V/us slew rate and a 5.1 MHz gain-bandwidth product. According to the Texas Instruments product page, these values describe a high-speed single operational amplifier with rail-to-rail output. The slew rate governs large-signal transition speed, while the gain-bandwidth product constrains closed-loop bandwidth and noise gain; both must be considered when setting filter poles and amplifier stability.
How much supply current does TLV2771ID consume?
The TLV2771ID consumes approximately 1 mA of supply current per channel in its normal operating state. This low current complements the 2.7 V minimum supply and makes the amplifier suitable for compact battery-powered and portable instrumentation. For a complete power budget, also evaluate shutdown-state consumption, the number of active amplifiers, operating voltage, and the thermal conditions at the package; consult the manufacturer datasheet for exact test conditions.
Where to buy TLV2771ID online?
Use the Request a Quote form on this page to request TLV2771ID availability, quantity pricing, and production lead time. The form allows buyers to specify the required quantity and package without relying on a static market listing. Before requesting a formal order, confirm the exact TLV2771ID orderable MPN, SOIC-8 package, operating-temperature marking, and any required quantity-break schedule with the purchasing team.
What is the price of TLV2771ID?
The current TLV2771ID price is best obtained through the Request a Quote form on this page because commercial pricing can vary with quantity, packaging, availability, and purchasing terms. Submit the required order quantity and production cadence with the request. This approach also allows the supplier to confirm whether the exact TLV2771ID order code is available in the 8-SOIC configuration rather than a different temperature grade or reel designation.
What is the lead time for TLV2771ID?
Request the current TLV2771ID lead time through the Request a Quote form on this page. Lead time depends on order quantity, scheduled delivery dates, inventory position, and the exact package and temperature-grade markings required by the production build. Include your target annual usage and forecast horizon so procurement can evaluate supply continuity as well as the lead time for an initial production order.
Is TLV2771ID in stock?
Check current TLV2771ID stock status through the Request a Quote form on this page. The form supports quantity-specific availability requests and helps distinguish temporary stock from parts that can be allocated for a recurring production schedule. Include the required 8-SOIC package and delivery schedule so the response reflects the exact configuration intended for the assembled product.
TLV2771ID vs TLV2771A - which is better for a precision analog design?
Choose based on the exact input-offset requirement: the Texas Instruments TLV2771A page identifies a 1.6 mV offset for that variant, while the TLV2771ID should be selected when its published offset is acceptable for the application. Both devices are described as single 5.5 V, 5.1 MHz, 10.5 V/us operational amplifiers, but the A designation indicates a changed precision specification. Verify pin compatibility and every electrical limit before substitution.
When should I choose TLV2771ID over TLV272IDR?
Choose the TLV2771ID when the design specifically benefits from its 5.1 MHz bandwidth and 10.5 V/us slew rate while fitting an 8-SOIC footprint. Choose the TLV272IDR only after checking its input-offset, noise, bias-current, common-mode, shutdown, and output-drive specifications against the TLV2771ID. Similar package size alone does not guarantee drop-in suitability because bias networks and shutdown logic can change the external connections.
Is TLV2771ID suitable for a sensor interface?
Yes, the TLV2771ID can suit low-voltage sensor interfaces when the sensor bandwidth is below the closed-loop capability of the selected gain configuration. Its 5.1 MHz gain-bandwidth product, 10.5 V/us slew rate, and approximately 1 mA supply current are useful for buffering or amplifying signals from resistive, current-output, or low-level sensing elements. Check sensor output range, common-mode limits, noise, settling time, and capacitive loading before finalizing the interface.
What can replace TLV2771ID?
A valid TLV2771ID replacement must use the same 8-SOIC footprint, preserve the pin functions and shutdown logic, and meet the circuit’s gain-bandwidth, slew-rate, offset, bias-current, input-range, output-swing, and noise requirements. TLV2771A, TLV272IDR, and TLV271IDR are relevant family comparisons, but each should be validated against the exact operating point. Use the manufacturer pin and electrical tables before approving a replacement.
What is the best Analog Devices equivalent for TLV2771ID?
There is no justified single Analog Devices equivalent without a defined application and electrical requirement set. An Analog Devices candidate must be pin-compatible with the 8-SOIC TLV2771ID, including shutdown polarity and logic levels, while preserving bandwidth, slew rate, common-mode range, output swing, and supply current. The available cross-reference information does not identify a verified Analog Devices drop-in model, so validate any proposed part against the original circuit and the manufacturer datasheet.

エンジニアリング参考データ: TLV2771ID — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the TLV2771ID for a compact, low-voltage analog stage that needs a single amplifier, 5.1 MHz bandwidth, 10.5 V/us slew rate, rail-to-rail output, and approximately 1 mA operating current per channel. It is particularly suitable for sensor conditioning, communications interfaces, active filters, ADC buffering, and portable measurement circuits. Select TLV2771CD when its specific precision and grade characteristics better match the design while retaining the same 8-SOIC family construction. Consider TLV272IDR when its offset, bias-current, noise, shutdown, and dynamic-response characteristics provide a better match, but validate every pin and limit before replacement. Consider TLV271IDR in the same way for designs centered on its own accuracy and performance envelope. None of these alternatives should be approved solely by package name; confirm common-mode range, output swing, shutdown polarity, stability, and system timing against the manufacturer datasheet.

代替品との比較

パラメータ この製品 TLV2771CD TLV272IDR TLV271IDR
Package 8-SOIC 8-SOIC - same 8-SOIC - same 8-SOIC - same
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Amplifier Configuration Single amplifier Single amplifier Single amplifier Single amplifier

主な差別化要因

  • Combines high dynamic performance with low operating current (vs TLV272IDR)
  • Single-amplifier 8-SOIC implementation reduces board space (vs TLV2771CD)
  • Supports low-voltage operation with rail-to-rail output (vs TLV271IDR)

設計ノート

Use the 5.1 MHz gain-bandwidth product to select a closed-loop gain that leaves adequate bandwidth margin for the signal of interest. The 10.5 V/us slew rate is the maximum large-signal transition capability, so confirm that the required output amplitude, frequency, and load do not create slew-rate distortion. For an ADC interface, include amplifier settling time and the converter’s acquisition window in the overall timing budget, then include an isolation resistor if capacitive kickback or capacitive loading could affect stability.

Place the supply bypass capacitor close to the positive supply and ground pins, and return its ground end through the shortest practical path on the PCB. The normal operating current is approximately 1 mA per channel, but total system demand also includes output current and leakage while shut down. Confirm that the shutdown logic is compatible with the external circuit and that the powered-down output cannot create an invalid level at the load. Do not infer input behavior during shutdown without checking the manufacturer guidance.

Do not assume that rail-to-rail output means the output can reach exactly the supply rails under every load. Check output-swing conditions, load current, input common-mode range, and supply headroom at the intended operating point. Also verify that an alternative amplifier uses the same 8-SOIC pin functions and shutdown polarity; a shared footprint does not by itself make biasing, logic levels, offset, bias current, or dynamic performance interchangeable.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

Compliance status must be confirmed from the Texas Instruments product documentation for the exact orderable MPN and manufacturing origin. No definitive compliance claim is made for TLV2771ID.

関連検索

TLV2771ID datasheet TLV2771ID pinout TLV2771ID datasheet pdf TLV2771ID 8-SOIC TLV2771ID 5.1 MHz TLV2771ID slew rate TLV2771ID equivalent TLV2771ID replacement TLV2771ID cross reference TLV2771ID vs TLV2771A Texas Instruments TLV2771ID TLV2771ID price TLV2771ID stock TLV2771 sensor signal conditioning

関連部品&用語

Texas Instruments TLV2771ID TLV2771 TLV2771A TLV2771CD TLV272IDR TLV271IDR operational amplifier CMOS operational amplifier signal conditioner rail-to-rail output gain-bandwidth product slew rate shutdown function 8-SOIC SOIC package family surface mount SMD low-voltage analog sensor interface active filter ADC buffer communications interface portable instrumentation supply current
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示