TLV4111CD - 300mA High-Output-Drive Op Amp | Texas Instruments
部品番号: TLV4111CD ✓ 生産中TLV4111CD 概要
An operational amplifier is an analog signal-conditioning semiconductor that amplifies the voltage difference between its non-inverting and inverting inputs. Within the broader semiconductor hierarchy, a TLV4111CD belongs to the operational-amplifier family and then to the wider category of amplifier ICs. Unlike a conventional low-current precision amplifier, this device is designed to support higher output-current loads while maintaining a straightforward single-supply architecture.
The main feature is its high output drive. According to the Texas Instruments TLV4111 family documentation, output current can exceed 300 mA at 5 V. This capability allows the amplifier to function as a buffer for higher-current loads, including coil-driver applications, rather than limiting the design to conventional sensor-signal amplification. The TLV4111CD is also described as a rail-to-rail, single operational amplifier in an 8-SOIC package.
The device is intended for low-voltage systems where a single supply simplifies power architecture. Rail-to-rail operation helps preserve usable input and output ranges near the supply rails, although designers should still review the datasheet for exact input- and output-voltage limits under the selected load and supply conditions. The high-drive architecture is particularly important because output-current demand can cause voltage droop, distortion, or loss of regulation in an amplifier with weaker output-stage capability.
Typical applications include high-current buffers, low-voltage coil drivers, audio and communications signal conditioning, industrial sensor interfaces, and general-purpose analog conditioning. In these systems, the amplifier can reduce loading on a preceding signal source and provide a low-impedance output where the driven load requires more current than a standard precision op amp can provide.
When laying out the circuit, account for output-current capability when sizing load paths and supply decoupling. Keep feedback routing short, connect compensation or stability components exactly as specified by the manufacturer, and verify thermal performance at the highest expected continuous output current. Loads that behave inductively require suitable flyback protection and should not be switched without a defined protection path.
This page combines the manufacturer product description, package and pin-format information, sourcing guidance, verified drop-in alternatives, and practical design considerations. It helps engineers identify where the TLV4111CD fits and which operating details must be confirmed in the manufacturer datasheet before release to production.
ドロップイン代替品: TLV4111CD — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
TLV4111IDR
✅ ドロップイン📋 参考代替品(カタログ未掲載)
TLV4111CDG4
✅ ドロップイン📋 参考代替品(カタログ未掲載)
TLV4111CD 最大定格&電気的特性
| Amplifier Type | Single operational amplifier |
| Number of Channels | 1 channel |
| Supply Architecture | Single supply |
| Input and Output Range | Rail-to-rail |
| Minimum Output Current at 5 V | Greater than 300 mA |
| Nominal Supply Voltage | 5 V |
| パッケージ | SOIC (D), 8 pins |
| 実装タイプ | Surface mount |
| Shutdown Feature | No shutdown feature; TLV4110 and TLV4113 include shutdown |
| RoHS ステータス | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
TLV4111CD soic (d), 8 pins ピン配置ガイド
TLV4111CD (soic (d), 8 pins パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: TLV4111CD.
詳細は データシート をご参照ください。
主な用途
TLV4111CD の用途: 6 件s: Low-Voltage Coil Driver, High-Current Signal Buffer, Audio Output Buffer, Industrial Sensor Conditioning, Communications Interface Buffer, Power-Sequencing Control.
Low-Voltage Coil Driver
The TLV4111CD fits low-voltage coil-driving circuits because its output current can exceed 300 mA at 5 V, substantially higher than a typical low-current precision amplifier can provide. Position the amplifier in a current-controlled or voltage-controlled drive stage, with the coil connected to the output and a return path to the supply. Because inductive current continues when the command changes, include a suitable flyback path and current limiting. The amplifier can reduce the effort required to drive the coil, but thermal performance and supply capability must be checked against continuous current rather than the peak current alone.
おすすめ
High-Current Signal Buffer
Use the TLV4111CD when a sensor or signal source drives a load that exceeds the comfortable output-current range of a conventional precision op amp. Its output current exceeding 300 mA at 5 V allows it to serve as a high-current buffer while retaining a single-supply, rail-to-rail architecture. Place the buffer close to the driven load when cable capacitance or long interconnects could create stability or signal-integrity issues. Verify source and sink capability, output-voltage headroom, and load impedance because the drive rating does not remove the need for correct gain-bandwidth and stability analysis.
おすすめ
Audio Output Buffer
The TLV4111CD can function as the final buffer in a low-voltage audio output stage when the load requires more current than a conventional small-signal amplifier can supply. The device's high output-drive capability, exceeding 300 mA at 5 V, reduces the risk of excessive output-voltage droop at higher loads. It is still necessary to confirm output-voltage swing, slew rate, gain-bandwidth behavior, and stability with the selected speaker or line-load model. Keep feedback routing compact and use local supply decoupling so output-current transients do not modulate the analog input rail.
おすすめ
Industrial Sensor Conditioning
The TLV4111CD is useful in industrial sensor-conditioning circuits that combine single-supply operation with a relatively demanding load. Its rail-to-rail input and output characteristics support low-voltage systems, while output current above 300 mA at 5 V provides margin for driving an active sensor, relay interface, or following stage. Review the input common-mode range and offset requirements for the specific sensor. Because industrial environments can introduce large transients, protect the input and output paths and validate supply tolerance, grounding, and thermal rise across the expected operating range.
おすすめ
Communications Interface Buffer
The TLV4111CD can buffer communications-interface signals when the destination load requires stronger drive than a general-purpose precision amplifier can provide. The 300 mA-plus output capability at 5 V allows the amplifier to act as a line or isolation-stage buffer, while rail-to-rail operation supports compact single-supply designs. Confirm that the selected gain is compatible with the device's gain-bandwidth response and that capacitive loading does not impair stability. Use short output routes, a defined return path, and local bypass capacitors to limit supply disturbance and preserve signal quality.
おすすめ
Power-Sequencing Control
The TLV4111CD can support low-voltage sequencing or control functions by driving a modest load referenced to a single supply. Its high-drive output may replace a separate buffer when the downstream network presents a current load that would burden a standard precision op amp. Because the TLV4111 itself does not include the shutdown function identified for other TLV411-family members, sequencing must be implemented with external control logic and appropriate pull-up or pull-down networks. Confirm output polarity, startup behavior, and tolerance of every driven node before relying on the amplifier for a safety-related sequence.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: TLV4111CD — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | TLV4111IDR | TLV4111CDG4 |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | SOIC (D), 8 pins | SOIC (D), 8 pins | SOIC (D), 8 pins |
| Device Type | Single operational amplifier | Single operational amplifier | Single operational amplifier |
| Number of Channels | 1 channel | 1 channel | 1 channel |
| Supply Architecture | Single supply | Single supply | Single supply |
| Input and Output Range | Rail-to-rail | Rail-to-rail | Rail-to-rail |
| Output Current at 5 V | Greater than 300 mA | Greater than 300 mA | Greater than 300 mA |
| Shutdown Feature | No shutdown feature | No shutdown feature | No shutdown feature |
| Primary Application | High-current buffer and low-voltage coil driver | High-current buffer and low-voltage coil driver | High-current buffer and low-voltage coil driver |
主な差別化要因
- Higher output drive than a conventional precision operational amplifier (vs OPA828ID)
- Same core TLV4111 family construction (vs TLV4111IDR)
- Direct drop-in ordering alternative in the same package (vs TLV4111CDG4)
設計ノート
Treat the 5 V, greater-than-300-mA output rating as a capability limit rather than a continuous-load target. Check source and sink current separately at the actual output voltage, because output current generally falls as the output approaches a supply rail. Estimate dissipation using the actual output voltage, load current, and supply voltage, then size the copper area and supply trace for worst-case continuous operation. Place the required bypass capacitors close to the device pins so output-current transients do not create excessive rail disturbance.
Keep the feedback loop physically small and route it directly between the amplifier output and inverting input. High-drive capability can make short feedback loops especially important when driving capacitive or long-wired loads. Place input, output, and supply-return paths with short connections, and separate sensitive input routing from high-current output paths. For inductive loads, provide a defined flyback path close to the coil so switching energy does not force the amplifier output into an unsafe operating region.
Estimate junction temperature from the calculated device dissipation, ambient temperature, and the package's thermal performance under the intended PCB conditions. Include the load's contribution to supply and copper heat spreading, and test with the production board rather than relying only on a generic thermal resistance. Continuous coil-driving operation can sustain substantial heat even when the amplifier appears electrically unloaded, so continuous current and duty cycle must be included in the thermal check.
Do not substitute TLV4110 or TLV4113 simply because they use a similar family package; the manufacturer identifies those members as having a shutdown feature, while TLV4111 does not. Also avoid assuming that rail-to-rail operation guarantees usable input range, output swing, or stability under every load. Confirm the absolute maximum ratings, common-mode limits, output swing, capacitive-load behavior, and recommended compensation from the manufacturer datasheet before finalizing the circuit.
コンプライアンス情報
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements were identified for this ordering code. Confirm product environmental and quality documentation with the manufacturer.