Texas Instruments

TLV4111CD - 300mA High-Output-Drive Op Amp | Texas Instruments

MPN: TLV4111CD ✓ Nakahanda
Single supply Vdss Greater than 300 mA Id SOIC (D), 8 pins Package
MOQ: 1 |

TLV4111CD Ulas

The Texas Instruments TLV4111CD is a single-supply, rail-to-rail operational amplifier with output current exceeding 300 mA at a 5 V supply, housed in an 8-pin SOIC (D) package. Its combination of low-voltage operation, rail-to-rail input and output behavior, and unusually strong output-drive capability makes it suitable for buffering, transducer excitation, and coil-driving circuits.

An operational amplifier is an analog signal-conditioning semiconductor that amplifies the voltage difference between its non-inverting and inverting inputs. Within the broader semiconductor hierarchy, a TLV4111CD belongs to the operational-amplifier family and then to the wider category of amplifier ICs. Unlike a conventional low-current precision amplifier, this device is designed to support higher output-current loads while maintaining a straightforward single-supply architecture.

The main feature is its high output drive. According to the Texas Instruments TLV4111 family documentation, output current can exceed 300 mA at 5 V. This capability allows the amplifier to function as a buffer for higher-current loads, including coil-driver applications, rather than limiting the design to conventional sensor-signal amplification. The TLV4111CD is also described as a rail-to-rail, single operational amplifier in an 8-SOIC package.

The device is intended for low-voltage systems where a single supply simplifies power architecture. Rail-to-rail operation helps preserve usable input and output ranges near the supply rails, although designers should still review the datasheet for exact input- and output-voltage limits under the selected load and supply conditions. The high-drive architecture is particularly important because output-current demand can cause voltage droop, distortion, or loss of regulation in an amplifier with weaker output-stage capability.

Typical applications include high-current buffers, low-voltage coil drivers, audio and communications signal conditioning, industrial sensor interfaces, and general-purpose analog conditioning. In these systems, the amplifier can reduce loading on a preceding signal source and provide a low-impedance output where the driven load requires more current than a standard precision op amp can provide.

When laying out the circuit, account for output-current capability when sizing load paths and supply decoupling. Keep feedback routing short, connect compensation or stability components exactly as specified by the manufacturer, and verify thermal performance at the highest expected continuous output current. Loads that behave inductively require suitable flyback protection and should not be switched without a defined protection path.

This page combines the manufacturer product description, package and pin-format information, sourcing guidance, verified drop-in alternatives, and practical design considerations. It helps engineers identify where the TLV4111CD fits and which operating details must be confirmed in the manufacturer datasheet before release to production.

Mga alternatibo na pwedeng ilagay na TLV4111CD — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

TLV4111IDR

✅ Drop-In
📦 SOIC (D), 8 pins
Same TLV4111 family and 8-pin SOIC (D) format; suffix-specific temperature and ordering requirements must be confirmed, with no quantified core parameter difference stated in the manufacturer listing

📋 Alternatibo na Reference (hindi sa katalogo)

TLV4111CDG4

✅ Drop-In
📦 SOIC (D), 8 pins
Same TLV4111CD device in the 8-pin SOIC (D) package; ordering suffix differs by 0 percentage points in the published core electrical ratings, which remain subject to suffix-specific qualification

📋 Alternatibo na Reference (hindi sa katalogo)

TLV4111CD Mga Pinakamataas na Rating at Electrical Characteristics

Amplifier Type Single operational amplifier
Number of Channels 1 channel
Supply Architecture Single supply
Input and Output Range Rail-to-rail
Minimum Output Current at 5 V Greater than 300 mA
Nominal Supply Voltage 5 V
Packhaging SOIC (D), 8 pins
Uri ng Pagpapasok Surface mount
Shutdown Feature No shutdown feature; TLV4110 and TLV4113 include shutdown
Tindminan RoHS unknown
REACH Status unknown
AEC-Q100 Qualification unknown

Gabay sa Pin Configuration ng TLV4111CD soic (d), 8 pins

Pin configuration para sa TLV4111CD (soic (d), 8 pins package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.

Pinout diagram ng soic (d), 8 pins package para sa TLV4111CD

Wala ng detalyadong pinout data na magagamit para sa TLV4111CD.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

TLV4111CD ay nararapat para sa 6 aplikasyons: Low-Voltage Coil Driver, High-Current Signal Buffer, Audio Output Buffer, Industrial Sensor Conditioning, Communications Interface Buffer, Power-Sequencing Control.

⚡

Low-Voltage Coil Driver

The TLV4111CD fits low-voltage coil-driving circuits because its output current can exceed 300 mA at 5 V, substantially higher than a typical low-current precision amplifier can provide. Position the amplifier in a current-controlled or voltage-controlled drive stage, with the coil connected to the output and a return path to the supply. Because inductive current continues when the command changes, include a suitable flyback path and current limiting. The amplifier can reduce the effort required to drive the coil, but thermal performance and supply capability must be checked against continuous current rather than the peak current alone.

🌐

High-Current Signal Buffer

Use the TLV4111CD when a sensor or signal source drives a load that exceeds the comfortable output-current range of a conventional precision op amp. Its output current exceeding 300 mA at 5 V allows it to serve as a high-current buffer while retaining a single-supply, rail-to-rail architecture. Place the buffer close to the driven load when cable capacitance or long interconnects could create stability or signal-integrity issues. Verify source and sink capability, output-voltage headroom, and load impedance because the drive rating does not remove the need for correct gain-bandwidth and stability analysis.

🎧

Audio Output Buffer

The TLV4111CD can function as the final buffer in a low-voltage audio output stage when the load requires more current than a conventional small-signal amplifier can supply. The device's high output-drive capability, exceeding 300 mA at 5 V, reduces the risk of excessive output-voltage droop at higher loads. It is still necessary to confirm output-voltage swing, slew rate, gain-bandwidth behavior, and stability with the selected speaker or line-load model. Keep feedback routing compact and use local supply decoupling so output-current transients do not modulate the analog input rail.

🏭

Industrial Sensor Conditioning

The TLV4111CD is useful in industrial sensor-conditioning circuits that combine single-supply operation with a relatively demanding load. Its rail-to-rail input and output characteristics support low-voltage systems, while output current above 300 mA at 5 V provides margin for driving an active sensor, relay interface, or following stage. Review the input common-mode range and offset requirements for the specific sensor. Because industrial environments can introduce large transients, protect the input and output paths and validate supply tolerance, grounding, and thermal rise across the expected operating range.

🌐

Communications Interface Buffer

The TLV4111CD can buffer communications-interface signals when the destination load requires stronger drive than a general-purpose precision amplifier can provide. The 300 mA-plus output capability at 5 V allows the amplifier to act as a line or isolation-stage buffer, while rail-to-rail operation supports compact single-supply designs. Confirm that the selected gain is compatible with the device's gain-bandwidth response and that capacitive loading does not impair stability. Use short output routes, a defined return path, and local bypass capacitors to limit supply disturbance and preserve signal quality.

🔧

Power-Sequencing Control

The TLV4111CD can support low-voltage sequencing or control functions by driving a modest load referenced to a single supply. Its high-drive output may replace a separate buffer when the downstream network presents a current load that would burden a standard precision op amp. Because the TLV4111 itself does not include the shutdown function identified for other TLV411-family members, sequencing must be implemented with external control logic and appropriate pull-up or pull-down networks. Confirm output polarity, startup behavior, and tolerance of every driven node before relying on the amplifier for a safety-related sequence.

What are the key specifications of TLV4111CD that engineers should know?
The TLV4111CD is a single-supply, rail-to-rail operational amplifier capable of output current exceeding 300 mA at a 5 V supply. According to the Texas Instruments TLV4111 family documentation, it is a single-amplifier device in an 8-pin SOIC (D) package. Its defining characteristic is high output drive, which allows it to serve as a buffer or coil driver rather than only as a low-current precision signal amplifier.
Where can I download the TLV4111CD datasheet PDF?
The official TLV4111 datasheet is available from Texas Instruments through the manufacturer document link on this page. According to the Texas Instruments TLV4111 family documentation, the document covers a family of high-output-drive operational amplifiers, including the TLV4111CD. Use the manufacturer datasheet to confirm the complete electrical limits, typical-performance curves, package dimensions, and recommended application circuits before production release.
What is the output-current capability of the TLV4111CD?
The TLV4111CD can provide output current in excess of 300 mA at a 5 V supply. According to the Texas Instruments TLV4111 family documentation, this high-drive capability allows standard pin-out amplifier circuits to operate as high-current buffers or coil drivers. The exact usable current still depends on supply voltage, output voltage, load characteristics, thermal conditions, and the limits defined in the datasheet.
Is the TLV4111CD pin-compatible with TLV4111IDR?
The TLV4111CD and TLV4111IDR are variants of the same TLV4111 device family and use the 8-pin SOIC (D) format. Their common-device identity and package format make TLV4111IDR a candidate for drop-in evaluation. Before substitution, confirm the required temperature grade, acquisition status, and every electrical limit for the exact suffix in the manufacturer datasheet and current ordering information.
What is the difference between TLV4111CD and TLV4111CDG4?
The TLV4111CD and TLV4111CDG4 identify ordering variants of the same TLV4111 amplifier in the 8-pin SOIC (D) package. Their core high-output-drive, single-supply, rail-to-rail architecture is intended to be equivalent, while suffix handling can distinguish processing, temperature, or packaging conventions. Confirm the exact orderable status and parameters in the manufacturer part-details page before using one as a replacement.
What can replace the TLV4111CD?
The closest same-family drop-in candidate identified for the TLV4111CD is the TLV4111IDR, which retains the TLV4111 identity and 8-pin SOIC (D) package format. No additional pin-compatible alternatives could be verified without risking an incorrect electrical or shutdown-function mismatch. Use the Request a Quote form on this page when requesting the exact MPN, package variant, and delivery requirements.
Is TLV4111CD suitable for coil-driver applications?
The TLV4111CD is suitable for low-voltage coil-driver applications because it can deliver output current exceeding 300 mA at 5 V. According to the Texas Instruments TLV4111 family documentation, this output capability is specifically intended to support high-current buffers and coil drivers. The external driver stage still requires a suitable flyback path, current limiting, and thermal review for the selected coil.
When should I choose the TLV4111CD over a standard precision op amp?
Choose the TLV4111CD when the load requires substantially more current than a conventional precision operational amplifier can drive while the design also needs a single low-voltage supply and rail-to-rail behavior. Its output current can exceed 300 mA at 5 V. If the load is a low-current sensor or precision measurement node, a precision amplifier may provide lower offset, bias, or noise performance and should be preferred when those parameters dominate.
Is TLV4111CD the same as TLV4111IDR?
The TLV4111CD and TLV4111IDR are not identical orderable codes, but they are variants of the same TLV4111 single-op-amp family in the 8-pin SOIC (D) package. Because package and family identity support drop-in evaluation, the main verification points are the exact electrical limits, temperature grade, and current lifecycle status. Confirm the suffix-specific requirements before treating either device as a universal substitute.
Where can I buy the TLV4111CD online?
The TLV4111CD can be requested through the Request a Quote form on this page, where the required MPN and quantity can be submitted for an offer. This avoids publishing a volatile price or asserting stock that may change rapidly. For engineering evaluation, the manufacturer product page and official family datasheet provide the appropriate starting point for technical and quality information.
What is the price of the TLV4111CD?
The current commercial terms for the TLV4111CD should be obtained through the Request a Quote form on this page. The form captures the exact 8-pin SOIC (D) ordering code and requested quantity so the offer can reflect current availability and market conditions. Do not use an older remembered price as a quotation or rely on it for budgeting without confirmation.
What is the lead time for the TLV4111CD?
The current lead time for the TLV4111CD should be requested through the Request a Quote form on this page. Lead time can vary with order quantity, package suffix, inventory position, and manufacturing schedules. Submit the exact MPN and required quantity, and use the confirmed schedule for production planning rather than relying on a generic catalog estimate.
Is the TLV4111CD in stock?
Stock status for the TLV4111CD should be confirmed through the Request a Quote form on this page. Because availability can change by quantity and package suffix, a general listing indication is not sufficient for a build commitment. State the required quantity and delivery target with the quote request to obtain a current availability response.
How should I design the output network around the TLV4111CD?
Design the output network for the load current rather than only for voltage gain. According to the Texas Instruments TLV4111 family documentation, the output stage can exceed 300 mA at 5 V, but sustained high current still requires local supply decoupling, short power traces, adequate copper area, and thermal verification. For inductive loads, add a suitable reverse-energy path and current-limiting arrangement.
Does the TLV4111CD have a shutdown pin?
The TLV4111 does not include the shutdown feature identified for the TLV4110 and TLV4113 members of the family. According to the Texas Instruments TLV4111 family documentation, only TLV4110 and TLV4113 come with shutdown. Consequently, a member with shutdown should not be treated as a drop-in replacement unless the added control function is intentionally connected and the complete pinout is verified.

Impormasyon ng Talumpati sa Engineering for TLV4111CD — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the TLV4111CD when a low-voltage, single-supply circuit must drive a relatively high current, especially a coil or a load beyond the comfortable range of a standard precision amplifier. Its rail-to-rail operation and output current exceeding 300 mA at 5 V make it a practical high-drive buffer or coil-driver element. Select TLV4111IDR when the same family and package are needed but the required temperature or ordering suffix differs. TLV4111CDG4 is another same-device drop-in candidate when its ordering conditions fit the production plan. Choose a precision amplifier such as OPA828ID instead when low offset, low bias current, low noise, or low-current precision dominates and the load does not require the TLV4111CD's high-drive capability. For any substitution, verify exact temperature range, electrical limits, load stability, and lifecycle status.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto TLV4111IDR TLV4111CDG4
Brand Texas Instruments Texas Instruments Texas Instruments
Package SOIC (D), 8 pins SOIC (D), 8 pins SOIC (D), 8 pins
Device Type Single operational amplifier Single operational amplifier Single operational amplifier
Number of Channels 1 channel 1 channel 1 channel
Supply Architecture Single supply Single supply Single supply
Input and Output Range Rail-to-rail Rail-to-rail Rail-to-rail
Output Current at 5 V Greater than 300 mA Greater than 300 mA Greater than 300 mA
Shutdown Feature No shutdown feature No shutdown feature No shutdown feature
Primary Application High-current buffer and low-voltage coil driver High-current buffer and low-voltage coil driver High-current buffer and low-voltage coil driver

Pangunahing mga Pagkakaiba

  • Higher output drive than a conventional precision operational amplifier (kumpara saOPA828ID)
  • Same core TLV4111 family construction (kumpara saTLV4111IDR)
  • Direct drop-in ordering alternative in the same package (kumpara saTLV4111CDG4)

Talaan ng Disenyo

Treat the 5 V, greater-than-300-mA output rating as a capability limit rather than a continuous-load target. Check source and sink current separately at the actual output voltage, because output current generally falls as the output approaches a supply rail. Estimate dissipation using the actual output voltage, load current, and supply voltage, then size the copper area and supply trace for worst-case continuous operation. Place the required bypass capacitors close to the device pins so output-current transients do not create excessive rail disturbance.

Keep the feedback loop physically small and route it directly between the amplifier output and inverting input. High-drive capability can make short feedback loops especially important when driving capacitive or long-wired loads. Place input, output, and supply-return paths with short connections, and separate sensitive input routing from high-current output paths. For inductive loads, provide a defined flyback path close to the coil so switching energy does not force the amplifier output into an unsafe operating region.

Estimate junction temperature from the calculated device dissipation, ambient temperature, and the package's thermal performance under the intended PCB conditions. Include the load's contribution to supply and copper heat spreading, and test with the production board rather than relying only on a generic thermal resistance. Continuous coil-driving operation can sustain substantial heat even when the amplifier appears electrically unloaded, so continuous current and duty cycle must be included in the thermal check.

Do not substitute TLV4110 or TLV4113 simply because they use a similar family package; the manufacturer identifies those members as having a shutdown feature, while TLV4111 does not. Also avoid assuming that rail-to-rail operation guarantees usable input range, output swing, or stability under every load. Confirm the absolute maximum ratings, common-mode limits, output swing, capacitive-load behavior, and recommended compensation from the manufacturer datasheet before finalizing the circuit.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements were identified for this ordering code. Confirm product environmental and quality documentation with the manufacturer.

Data napatotohanan sa: 2026-11-19 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

tlv4111cd op amp TLV4111CD datasheet TLV4111CD datasheet pdf TLV4111CD pinout TLV4111CD equivalent TLV4111CD replacement TLV4111CD SOIC-8 Texas Instruments TLV4111CD TLV4111CD 300mA op amp TLV4111CD rail-to-rail TLV4111CD coil driver TLV4111CD vs TLV4111IDR TLV4111CD price TLV4111CD stock

Mga kaugnay na Mga Komponente at mga Tuntunin

Texas Instruments TLV4111CD TLV4111IDR TLV4111CDG4 TLV4111 TLV4110 TLV4113 OPA828ID operational amplifier single operational amplifier amplifier IC high-output-drive amplifier rail-to-rail amplifier single-supply amplifier high-current buffer coil driver SOIC-8 SOIC package surface-mount package analog signal conditioning output current supply voltage feedback network semiconductor
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ