TMS320C6421ZWT6 - 600MHz 32-Bit Fixed-Point DSP | Texas Instruments
部品番号: TMS320C6421ZWT6 ✓ 生産中TMS320C6421ZWT6 概要
A digital signal processor, or DSP, is a programmable semiconductor optimized for arithmetic-intensive operations on continuously sampled data. The TMS320C6421 belongs to the C64x+ family, combining a parallel execution architecture with dedicated peripherals for communications, storage, and multimedia data movement. Its hierarchy is fixed-point DSP, C64x+ processor, real-time signal-processing IC, embedded processor, and semiconductor.
The processor operates from 1.8 V and 3.3 V I/O rails and supports an 8-bit EMIFA, 16-bit DDR2 SDRAM interface, and 10/100 Ethernet MAC. A 600 MHz clock rate makes the device suitable for demanding fixed-point workloads that require predictable instruction throughput. The 361-NFBGA construction supports dense designs but demands careful escape routing, multilayer PCB construction, and effective thermal management.
Its C64x+ architecture is designed for signal-processing workloads such as filtering, transforms, communications, control, and multimedia acceleration. The integrated Ethernet MAC enables network-connected equipment, while McASP, McBSP, UART, I2C, and HPI provide multiple paths for sensor data, audio data, control traffic, and host-processor communication. The 4800 MIPS figure reflects the processor's 32-bit architecture and 600 MHz operating frequency rather than a general-purpose application benchmark.
Typical uses include industrial media processing, embedded communications equipment, network appliances, audio and control systems, test equipment, and image or video processing modules. Designers choose this DSP when deterministic arithmetic throughput, external DDR2 memory access, and a broad set of dedicated interfaces are more important than the simplicity of a general-purpose microcontroller.
The principal implementation challenge is the 361-ball grid array footprint. Follow the manufacturer's pin-connection and land-pattern guidance, provide decoupling close to the supply balls, route DDR2 signals as a controlled-impedance group, and validate power and ground planes at production volume. The package also requires attention to thermal dissipation because sustained 600 MHz operation can make board-level heat removal a significant portion of the design effort.
This page organizes the processor's principal electrical characteristics, interface capabilities, application roles, and sourcing questions into one engineering reference. It also distinguishes a genuine same-family orderable alternative from broadly similar processors that use the same 361-ball format but do not provide the required pin-to-pin interchangeability.
ドロップイン代替品: TMS320C6421ZWT6 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: TMS320C6421ZWT6 (同一形状・フットプリント) — 相違点: Package, Architecture, External Memory Interface, DDR2 Memory Interface, Number of Terminals.
TMS320C6421ZWT7
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →TMS320C6421ZWT6 仕様
| Processor Type | Fixed-point digital signal processor |
| Architecture | C64x+ |
| Data Width | 32 bit |
| Maximum Clock Rate | 600 MHz |
| Instruction Throughput | 4800 MIPS |
| On-Chip ROM | 64 kB |
| On-Chip RAM | 96 kB |
| I/O Voltage | 1.8 V, 3.3 V |
| External Memory Interface | 8-bit EMIFA, 16-bit DDR2 SDRAM |
| Network Interface | 10/100 Ethernet MAC |
| Serial Interfaces | HPI, I2C, McASP, McBSP, UART |
| パッケージ | 361-contact NFBGA, 16 mm x 16 mm |
| Package Code | LFBGA |
| Terminal Form | Ball |
| Number of Terminals | 361 |
| Package Shape | Square |
| Temperature Grade | Commercial |
| Packaging | Tray |
| Product Status | Active |
TMS320C6421ZWT6 square ピン配置ガイド
TMS320C6421ZWT6 (square パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: TMS320C6421ZWT6.
詳細は データシート をご参照ください。
主な用途
TMS320C6421ZWT6 の用途: 6 件s: Networked Industrial Media Processing, Audio Signal Conditioning, Communications Gateway, Industrial Control and Data Acquisition, Test and Measurement Front End, Video and Image Processing.
Networked Industrial Media Processing
The TMS320C6421ZWT6 fits a networked media node that must process fixed-point data while exchanging control and bulk traffic over Ethernet. Its 600 MHz C64x+ core provides up to 4800 MIPS of throughput, while the integrated 10/100 Ethernet MAC reduces the need for a separate host interface. External DDR2 connected through the 16-bit DDR2 interface can hold frame buffers or intermediate signal data. A practical design should isolate the Ethernet magnetics, use controlled-impedance routing for DDR2, and validate sustained throughput under the highest expected packet and processing load.
おすすめ
Audio Signal Conditioning
The TMS320C6421ZWT6 is appropriate for multichannel audio processing, filtering, mixing, and format conversion because its fixed-point C64x+ core executes arithmetic-intensive sequences efficiently at up to 600 MHz. The integrated McASP and McBSP interfaces support serialized audio-device connections, while DDR2 memory can accommodate multichannel working buffers. For a production design, assign McASP clock and frame-sync signals according to the selected codec interface, keep high-speed serial routes short, and verify that software scheduling leaves sufficient margin for the complete DSP processing chain.
おすすめ
Communications Gateway
A communications gateway benefits from the TMS320C6421ZWT6 because the 600 MHz DSP core handles filtering, modulation-related arithmetic, packet payload processing, and real-time control without relying solely on a general-purpose CPU. HPI supports a host-processor partition, UART provides a low-speed management path, and I2C supports configuration peripherals. The 10/100 Ethernet MAC can terminate network traffic when its supported operating mode matches the design. Firmware should partition CPU-intensive signal tasks from protocol management and validate interrupt latency under sustained network traffic.
おすすめ
Industrial Control and Data Acquisition
The TMS320C6421ZWT6 can serve as the high-speed signal-processing element in an industrial acquisition system where filtering, interpolation, demodulation, and control calculations must execute predictably. McASP and McBSP accommodate synchronous sensor streams, while UART and I2C handle slower configuration and monitoring tasks. The 8-bit EMIFA can connect to asynchronous memory or peripheral devices, and DDR2 provides space for acquisition buffers. Designers should establish independent clocks, use solid grounding between analog and digital sections, and test the complete timing chain under worst-case sample rates.
おすすめ
Test and Measurement Front End
The TMS320C6421ZWT6 is well suited to a real-time measurement instrument because its C64x+ core performs high-rate filtering and transformation while external DDR2 accommodates long capture records. The Ethernet MAC supports networked test equipment, and UART or HPI provides a reliable configuration channel for an operator interface or embedded host. Timing accuracy depends on a clean clock source, careful decoupling of the 1.8 V and 3.3 V domains, and DDR2 layout validation. Firmware should use deterministic acquisition blocks and verify buffer latency across the full operating temperature range of the selected grade.
おすすめ
Video and Image Processing
The TMS320C6421ZWT6 can implement fixed-point image and video processing in embedded equipment when a 600 MHz DSP, DDR2 bandwidth, and dedicated serial interfaces are sufficient for the workload. The 16-bit DDR2 interface supports high-throughput frame buffers, while EMIFA connects to lower-speed capture or display components and McASP or McBSP can connect specialized converters. Because the processor does not include the dedicated video engines found in some digital media SoCs, software and system partitioning must account for pixel throughput. DDR2 eye-margin testing and sustained frame-rate measurements are essential before deployment.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: TMS320C6421ZWT6 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | TMS320C6421ZWT7 |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | 361-contact NFBGA (16 mm x 16 mm) | 361-contact NFBGA (16 mm x 16 mm) |
| Processor Type | Fixed-point digital signal processor | Fixed-point digital signal processor |
| Architecture | C64x+ | C64x+ |
| Maximum Clock Rate | 600 MHz | 600 MHz |
| Instruction Throughput | 4800 MIPS | 4800 MIPS |
| On-Chip ROM | 64 kB | 64 kB |
| On-Chip RAM | 96 kB | 96 kB |
| External Memory Interface | 8-bit EMIFA, 16-bit DDR2 SDRAM | 8-bit EMIFA, 16-bit DDR2 SDRAM |
| Network Interface | 10/100 Ethernet MAC | 10/100 Ethernet MAC |
| I/O Voltage | 1.8 V, 3.3 V | 1.8 V, 3.3 V |
主な差別化要因
- Dedicated C64x+ fixed-point processing engine (vs General-purpose microcontroller)
- Integrated network and real-time serial peripherals (vs General-purpose microcontroller)
- DDR2-oriented external memory architecture (vs TMS320DM6435ZWT6)
設計ノート
Implement the 361-contact NFBGA on a multilayer PCB with continuous ground planes and short, direct connections between power and ground balls. Follow the Texas Instruments package and land-pattern guidance for ball pitch, solder-mask definition, and via placement. Do not substitute a generic 361-ball footprint because power, ground, and signal ball assignments are device-specific.
Route the 16-bit DDR2 interface as a controlled-impedance group with matched-length-by-design topology and via structures appropriate for the selected stackup. Keep the DDR2 memory close to the processor, place decoupling at the associated supply balls, and avoid DDR2 routing beneath noisy clock or power-converter regions. Validate the completed layout with simulation and eye-margin measurements.
Treat the 1.8 V and 3.3 V rails as separate power domains and verify sequencing, tolerance, ripple, and startup behavior against the manufacturer requirements. Place local high-frequency and bulk capacitance close to the associated device and power-entry points. Estimated regulator sizing must use the measured core and I/O current for the actual clock, memory, and peripheral configuration rather than a single nominal value.
Create a thermal path from the package to the PCB copper and provide adequate airflow or conduction according to the board enclosure. Estimated junction temperature should combine measured package dissipation, the board-specific thermal resistance, and ambient temperature. Because the package is a dense NFBGA, thermal performance depends heavily on via arrays and copper distribution rather than the exposed package area alone.
Keep clock distribution symmetrical and isolate noisy switching nodes from McASP, McBSP, Ethernet, and external-memory interfaces. Use source-terminated or properly terminated clock networks according to the clocking architecture, and avoid long stubs. Test interface eye patterns at maximum traffic and operating temperature, with particular attention to DDR2 command, address, data, and bidirectional strobes.
コンプライアンス情報
The commercial temperature grade and active lifecycle status are listed for TMS320C6421ZWT6. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation for the exact order code.