TMS320LC206PZ80 - 80MHz Fixed-Point DSP | Texas Instruments
部品番号: TMS320LC206PZ80 ✓ 生産中TMS320LC206PZ80 概要
A digital signal processor, or DSP, is a semiconductor optimized to execute arithmetic-intensive algorithms efficiently. It belongs to the processor hierarchy that includes microcontrollers, microprocessors, embedded processors, and digital signal processors. Unlike general-purpose control processors, the TMS320LC206 architecture emphasizes parallel arithmetic, deterministic execution, dedicated serial communication, and direct access to external program and data memory. This makes it suitable for signal-processing tasks where throughput and repeatable timing matter more than a broad peripheral set.
The principal feature of the TMS320LC206PZ80 is its 80 MHz operating frequency, which increases the instruction throughput available for fixed-point filtering, control, modulation, and signal-analysis routines. Its 4K × 16-bit internal program/data RAM provides local storage for working code and data. The programmable external-memory interface can address as much as 224K × 16 bits, with software-programmable wait states from 0 to 7 for adapting to different memory and bus timing requirements.
The enhanced synchronous serial port supports high-speed serial data transfer and is useful when connecting the processor to converters, transducers, codecs, or another digital system. The static CMOS implementation provides a defined output state and supports operation with controlled power behavior. The device is associated with the TI C20x/C2000 platform and supports source compatibility with TMS320C25 and other 20x devices, reducing migration effort for suitable legacy software.
Typical applications include industrial motor and motion control, digital audio and communications signal processing, measurement and instrumentation, embedded speech or acoustic processing, and control systems requiring deterministic fixed-point computation. The large external address space allows substantial program or data storage outside the processor while the 100-pin package provides a broad interface complement for external memory and serial peripherals.
Designers should preserve signal and power integrity around this 14 mm × 14 mm LQFP. External-memory routing should follow the pin-description and timing information in the manufacturer datasheet, while unused inputs and outputs should be configured according to the device recommendations. Because the processor can drive external memory and peripherals, board-level timing and impedance verification remain important even though the device itself operates from a single supply architecture.
This page consolidates the verified device identity, package details, memory architecture, price reference, and practical selection guidance. It also distinguishes verified same-package replacements from functional DSP alternatives that do not provide pin-to-pin interchangeability, helping engineers avoid treating unrelated processors as drop-in replacements.
ドロップイン代替品: TMS320LC206PZ80 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: TMS320LC206PZ80 (同一形状・フットプリント) — 相違点: Architecture, Device Type, On-Chip Memory, Operating Temperature, Package.
TMS320LC206PZA80
✅ ドロップイン📋 参考代替品(カタログ未掲載)
TMS320LC206PZ80 仕様
| Device Type | Fixed-point digital signal processor (DSP) |
| 最大クロック周波数 | 80 MHz |
| Architecture | C20x/C2000 platform |
| Process Technology | Static CMOS |
| On-Chip Program/Data RAM | 4K × 16 words |
| RAM Access Type | Single-access program/data RAM |
| Maximum External Memory Space | 224K × 16 bits |
| Programmable Wait States | 0 to 7 |
| Serial Port | Enhanced Synchronous Serial Port |
| パッケージ | 100-pin LQFP (PZ) |
| Package Dimensions | 14 mm × 14 mm |
| 実装タイプ | Surface mount |
| ピン数 | 100 pins |
| 動作温度 | 0°C to +70°C |
| Source Compatibility | Compatible with TMS320C25 and other 20x devices |
| Product Family | C20x/C2000 |
TMS320LC206PZ80 14 mm × 14 mm ピン配置ガイド
TMS320LC206PZ80 (14 mm × 14 mm パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: TMS320LC206PZ80.
詳細は データシート をご参照ください。
主な用途
TMS320LC206PZ80 の用途: 6 件s: Industrial Motor and Motion Control, Digital Audio Signal Processing, Measurement and Instrumentation, Communications Signal Processing, Audio and Acoustic Control, Embedded Control with External Memory.
Industrial Motor and Motion Control
The TMS320LC206PZ80 fits fixed-point motor-control designs that require deterministic arithmetic at an 80 MHz clock rate. Its 4K × 16 words of internal program/data RAM supports local execution, while the external memory interface can address up to 224K × 16 bits for larger control tables, trace buffers, or application code. The enhanced synchronous serial port can connect the processor to suitable sensing or drive interfaces. Design the implementation around software-programmable wait states of zero to seven so external memory timing matches the selected device and board layout.
おすすめ
Digital Audio Signal Processing
The TMS320LC206PZ80 can execute fixed-point audio-processing routines at up to 80 MHz and transfer serial samples through its enhanced synchronous serial port. Its internal 4K × 16 words of RAM is suitable for working buffers and time-critical routines, while the external memory space provides room for larger coefficient, waveform, or program storage. The architecture also offers source compatibility with TMS320C25 and other 20x devices, which can reduce redevelopment effort for compatible legacy audio code. Validate serial framing, sample-rate timing, and external-memory behavior in the target system.
おすすめ
Measurement and Instrumentation
The TMS320LC206PZ80 is suited to measurement systems that combine sampling, filtering, calibration, and real-time signal analysis. Its 80 MHz clock rate supports efficient fixed-point arithmetic, and the enhanced synchronous serial port provides a dedicated path for converter data. The 224K × 16-bit addressable external memory range allows algorithms and acquisition data to remain outside the 4K × 16 words of internal RAM. A practical implementation should define memory wait states, isolate analog and digital sections appropriately, and test timing margins across temperature and supply conditions.
おすすめ
Communications Signal Processing
The TMS320LC206PZ80 can serve as the fixed-point computation core in communications equipment requiring fast filtering, modulation, demodulation, or bit-oriented signal operations. The 80 MHz execution rate provides substantial instruction throughput, while the enhanced synchronous serial port supports serial transfers to suitable codecs, converters, or network-facing signal-chain components. Software compatibility with other 20x devices helps preserve established algorithms and driver structures. Designers should verify clocking, serial-port framing, external-memory wait states, and thermal performance before finalizing the board design.
おすすめ
Audio and Acoustic Control
The TMS320LC206PZ80 supports embedded acoustic applications that need repeatable fixed-point computation and flexible external storage. Its 4K × 16 words of single-access program/data RAM can hold active routines and working data, while the external interface can expand to 224K × 16 bits for coefficients, histories, or more elaborate control structures. The enhanced synchronous serial port is useful for microphone, speaker, or codec links when its electrical and framing requirements match the peripheral. Use the established 20x software environment to reduce porting effort where the legacy algorithm code is compatible.
おすすめ
Embedded Control with External Memory
The TMS320LC206PZ80 fits embedded control systems that need more program or data storage than the 4K × 16 words of internal RAM. Its external memory architecture addresses up to 224K × 16 bits, and the wait-state generator can be programmed from zero to seven states to accommodate different memory devices and bus timing. The 80 MHz DSP core supports arithmetic-heavy loops while the 100-pin LQFP provides the external bus and peripheral connectivity needed for a board-level design. Confirm pin multiplexing, memory-map compatibility, bus timing, and software initialization before substituting the processor into an existing design.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: TMS320LC206PZ80 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | TMS320LC206PZA80 |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | 100-LQFP (PZ), 14 mm × 14 mm | 100-LQFP (PZ) |
| Device Type | Fixed-point digital signal processor | Fixed-point digital signal processor |
| Maximum Clock Frequency | 80 MHz | 80 MHz |
| On-Chip Program/Data RAM | 4K × 16 words | 4K × 16 words |
| Maximum External Memory Space | 224K × 16 bits | 224K × 16 bits |
| Programmable Wait States | 0 to 7 | 0 to 7 |
| Serial Interface | Enhanced Synchronous Serial Port | Enhanced Synchronous Serial Port |
| Architecture | C20x/C2000 platform | C20x/C2000 platform |
主な差別化要因
- Exact-family package continuity (vs TMS320LC206PZA80)
- Large external memory reach (vs TMS320LC206PZA80)
- Software continuity (vs TMS320LC206PZA80)
設計ノート
Route the external-memory interface according to the pin-description and timing diagrams in the manufacturer datasheet. Keep clock, wait-state control, and memory signals away from noisy analog inputs, and use a continuous ground reference beneath the device. Although the processor is packaged in a 100-pin LQFP, a 14 mm × 14 mm footprint leaves limited routing escape space, so fanout planning and layer assignment should begin before the schematic is frozen.
Follow the manufacturer’s supply-pin and decoupling recommendations for every power terminal. Place local high-frequency bypass capacitors at the appropriate supply pins and provide low-impedance planes for return current. The external-memory and serial interfaces can create dynamic current changes at the 80 MHz operating rate, so test supply ripple and processor behavior with the intended memory devices, termination, and peripheral loading rather than an unloaded evaluation board.
Do not assume that every 100-pin LQFP DSP is pin-compatible. The TMS320LC206PZA80 is a same-family, same-package alternative, but its temperature-grade suffix must satisfy the product’s environmental requirements. For any other candidate, verify every pin, power rail, boot or configuration signal, memory interface, serial-port function, clock requirement, and software model before treating it as a replacement.
Configure external-memory wait states using worst-case access timing rather than nominal memory speed. Account for processor output timing, board propagation, load capacitance, round-trip topology, and the selected memory device’s hold requirements. Confirm the settings in an assembled prototype because changes in stack-up, traces, termination, or memory components can alter timing margins even when the schematic and software remain unchanged.
Evaluate thermal performance at the maximum expected 80 MHz processing load and ambient temperature. Use the exposed package geometry and manufacturer thermal information when planning copper areas, airflow, and board construction. The processor’s activity depends on the executed instruction stream and attached peripherals, so a thermally conservative estimate should use sustained workload rather than an idle or short benchmark when sizing the thermal path.
コンプライアンス情報
The product information confirms a static-CMOS 100-LQFP DSP but does not state the requested environmental, halogen-free, lead-free, REACH, or conflict-minerals declarations. A complete 100-pin pinout was not transcribed because the verified excerpts do not provide the pin-description table.