TUSB2036AVF - 2/3-Port 12Mbps USB Hub | Texas Instruments
部品番号: TUSB2036AVF ✓ 生産中TUSB2036AVF 概要
A USB hub is a system-level interface component that expands one host connection into multiple peripheral ports. The TUSB2036AVF belongs to the USB interface controller hierarchy, combining USB transceiver circuitry, port-management logic, and optional configuration storage in one CMOS ASIC. This integration simplifies PCB design for legacy full-speed USB systems, printers, industrial peripherals, and embedded equipment that require more than one USB device connection.
Key features include integrated upstream and downstream USB transceivers, selectable two- or three-port operation, 12-Mbps full-speed data transfer, and an optional serial EEPROM interface. Because the downstream-port count is selected through an input pin, one board design can support two-port or three-port configurations without changing the controller IC. The digital state-machine implementation also means the hub does not require embedded hub firmware.
The controller uses a 3.3-V CMOS logic implementation and provides dedicated USB transceiver functions for all supported ports. Its architecture is intended for full-speed USB 2.0-compatible systems rather than high-speed 480-Mbps operation. Power, decoupling, routing, and signal-integrity layouts must therefore be evaluated specifically for 12-Mbps full-speed signaling rather than high-speed USB impedance rules.
Typical applications include USB-to-multiple-peripheral adapters, legacy printer interfaces, industrial control equipment, data acquisition systems, and embedded host platforms using full-speed USB peripherals. The optional EEPROM interface allows port configuration to be stored externally, which is useful when a product requires consistent downstream-port behavior across power cycles.
When laying out the PCB, place the controller and supporting passive components close to their associated connector and power-entry points. Keep USB differential traces short, pair them continuously, minimize stub branches, and provide the decoupling network specified by the manufacturer. Confirm the selected two-port or three-port configuration and verify downstream-port power switching before releasing the layout.
This page organizes the official product information into a design-oriented view covering USB speed, port topology, logic voltage, configuration options, package considerations, application fit, and replacement limitations. It also distinguishes confirmed device functions from assumptions that require engineering verification against the manufacturer datasheet.
ドロップイン代替品: TUSB2036AVF — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: TUSB2036AVF (同一形状・フットプリント) — 相違点: Logic Technology, Package.
TUSB2036VFR
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →TUSB2036AVF 仕様
| Device Type | 2/3-port USB full-speed hub controller |
| USB Data Rate | 12 Mbps |
| Upstream Port Count | 1 port |
| Downstream Port Count | 2 or 3 programmable ports |
| Downstream Port Selection | Input-pin controlled |
| 電源電圧 | 3.3 V |
| Logic Technology | 3.3-V CMOS |
| USB Transceivers | Integrated for upstream and downstream ports |
| USB Compliance | USB 2.0 full-speed hub |
| Configuration Interface | Optional serial EEPROM interface |
| Control Architecture | Digital state machine |
| Firmware Requirement | No firmware programming required |
| パッケージ | 32-pin LQFP |
| 実装タイプ | Surface mount |
TUSB2036AVF 32-pin lqfp ピン配置ガイド
TUSB2036AVF (32-pin lqfp パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: TUSB2036AVF.
詳細は データシート をご参照ください。
主な用途
TUSB2036AVF の用途: 6 件s: Legacy USB Printer Expansion, Industrial Data Acquisition, Embedded USB Peripheral Hub, USB-to-Multiple-Peripheral Adapter, Instrumentation Front Panel, Legacy Connectivity Adapter.
Legacy USB Printer Expansion
The TUSB2036AVF can expand one full-speed USB host connection into two or three downstream ports for legacy printers, scanners, and similar peripherals. Its 12-Mbps USB full-speed operation matches the target device class, while integrated upstream and downstream transceivers reduce the external interface circuitry. The digital state-machine architecture also removes firmware programming from the hub design. Because the downstream count is selected by an input pin, the controller can support both two-port and three-port product configurations while retaining a common PCB architecture.
Industrial Data Acquisition
The TUSB2036AVF is suitable for industrial data-acquisition equipment that connects one host to multiple full-speed measurement peripherals. Its 12-Mbps operation, integrated transceivers, and firmware-free digital control simplify implementation of a multiport USB interface. The optional serial EEPROM path can preserve externally defined port configuration across power cycles. Board-level qualification should also verify operating temperature, ESD performance, ground strategy, and the electrical requirements of each attached peripheral before deployment in industrial environments.
Embedded USB Peripheral Hub
The TUSB2036AVF can provide an embedded hub function in a legacy control system, allowing one USB host connection to reach multiple internal or external full-speed peripherals. Its 3.3-V CMOS implementation and integrated transceivers are useful when minimizing the number of separate interface components. No firmware programming is required, which helps shorten development time. The design must still provide compliant downstream-port power control, stable 3.3-V distribution, and layout that preserves USB signal quality from the controller to each connector.
USB-to-Multiple-Peripheral Adapter
A standalone adapter can use the TUSB2036AVF to divide one upstream USB connection into two or three downstream full-speed connections. The controller handles the hub state machine and transceiver functions while the product-level board adds connectors, port protection, and power distribution. Its selectable two-port or three-port topology makes it useful across several adapter models. USB full-speed signaling should be routed as controlled differential pairs with minimized stubs and uninterrupted reference-plane continuity.
Instrumentation Front Panel
Test and measurement instruments can use the TUSB2036AVF to connect a host controller with several full-speed service peripherals, such as a printer, calibration interface, or legacy storage device. The hub's firmware-free implementation reduces software-maintenance requirements, and its integrated transceivers simplify the analog interface layout. For professional instrumentation, confirm the operating-temperature range, grounding method, downstream-current budget, and electromagnetic-compatibility requirements before the board enters production.
Legacy Connectivity Adapter
The TUSB2036AVF fits adapter products intended to preserve compatibility with 12-Mbps USB full-speed peripherals. One host-side upstream port and input-pin-selected downstream ports allow a compact product to serve multiple devices without implementing a hub in a microcontroller. The optional EEPROM interface supports applications requiring persistent configuration. Designers should avoid using this device where a system expects high-speed USB operation, because 480-Mbps transfer performance is outside the controller's stated capability.
エンジニアリング参考データ: TUSB2036AVF — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 |
|---|---|
| Device Type | 2/3-port USB full-speed hub controller |
| Brand | Texas Instruments |
| Package | 32-pin LQFP |
| USB Data Rate | 12 Mbps |
| Upstream Ports | 1 port |
| Downstream Ports | 2 or 3 programmable ports |
| Supply Voltage | 3.3 V |
| Integrated Transceivers | Yes, for upstream and downstream ports |
| Configuration Interface | Optional serial EEPROM interface |
| Firmware Requirement | No firmware programming required |
主な差別化要因
- Firmware-free hub implementation (vs TUSB2046BVF)
- Selectable downstream-port topology (vs TUSB2036VFR)
- Integrated transceiver coverage (vs TUSB2036VFR)
設計ノート
Route each USB differential pair as a controlled, continuous pair with substantially uniform length and no unnecessary test pads or branch stubs. Keep the controller and the associated connector path compact, maintain a continuous reference plane beneath the pair, and avoid crossing unrelated high-current or switching-signal paths. Although the interface is 12-Mbps full-speed, disciplined pair routing reduces susceptibility to edge-rate harmonics and makes the design less dependent on connector or enclosure details.
Treat the 3.3-V rail and USB downstream power as separate design concerns. The TUSB2036AVF requires a stable 3.3-V CMOS supply, while enabled downstream ports may require power from external circuitry. Use the manufacturer-recommended decoupling arrangement at the controller and place the capacitors close to the relevant supply pins. Verify each downstream power switch against the current requirement of the attached peripheral and use the datasheet's startup and power-management guidance when sequencing ports.
Do not treat the TUSB2036AVF as a 480-Mbps high-speed USB hub controller. Its specified operating speed is 12 Mbps full-speed, and its downstream-port count is selected by an input rather than being freely configured through firmware. Verify the logic state, connector count, and port-power circuitry against the intended two-port or three-port product configuration. Also avoid assuming that the optional EEPROM interface is required; populate or bypass it according to the selected configuration strategy.
Keep USB connector protection, common-mode chokes, or other discrete interface components out of the high-speed return path unless their impact on the differential impedance has been evaluated. Maintain continuous ground-return paths beneath the USB signals and use the manufacturer's reference layout as the geometry baseline. Any extension from the board to an external cable should be considered part of the transmission-line problem, particularly if the product uses long internal leads or panel-mounted connectors.
コンプライアンス情報
The device is a USB interface controller rather than an automotive-qualified device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established by the product information and remain unknown.