Texas Instruments

TUSB2036AVF - 2/3-Port 12Mbps USB Hub | Texas Instruments

N.º da peça: TUSB2036AVF ✓ Ativo
3.3 V Vdss 32-pin LQFP Package
MOQ: 1 |

TUSB2036AVF Visão geral

Texas Instruments TUSB2036AVF is a 2/3-port, 12-Mbps USB full-speed hub controller with an optional serial EEPROM interface, housed in a 32-pin LQFP package. The device operates from a 3.3-V supply and provides one upstream port plus two or three programmable downstream ports. Its USB 2.0-compliant implementation integrates transceivers for every upstream and downstream connection, while a digital state-machine architecture eliminates firmware programming requirements.

A USB hub is a system-level interface component that expands one host connection into multiple peripheral ports. The TUSB2036AVF belongs to the USB interface controller hierarchy, combining USB transceiver circuitry, port-management logic, and optional configuration storage in one CMOS ASIC. This integration simplifies PCB design for legacy full-speed USB systems, printers, industrial peripherals, and embedded equipment that require more than one USB device connection.

Key features include integrated upstream and downstream USB transceivers, selectable two- or three-port operation, 12-Mbps full-speed data transfer, and an optional serial EEPROM interface. Because the downstream-port count is selected through an input pin, one board design can support two-port or three-port configurations without changing the controller IC. The digital state-machine implementation also means the hub does not require embedded hub firmware.

The controller uses a 3.3-V CMOS logic implementation and provides dedicated USB transceiver functions for all supported ports. Its architecture is intended for full-speed USB 2.0-compatible systems rather than high-speed 480-Mbps operation. Power, decoupling, routing, and signal-integrity layouts must therefore be evaluated specifically for 12-Mbps full-speed signaling rather than high-speed USB impedance rules.

Typical applications include USB-to-multiple-peripheral adapters, legacy printer interfaces, industrial control equipment, data acquisition systems, and embedded host platforms using full-speed USB peripherals. The optional EEPROM interface allows port configuration to be stored externally, which is useful when a product requires consistent downstream-port behavior across power cycles.

When laying out the PCB, place the controller and supporting passive components close to their associated connector and power-entry points. Keep USB differential traces short, pair them continuously, minimize stub branches, and provide the decoupling network specified by the manufacturer. Confirm the selected two-port or three-port configuration and verify downstream-port power switching before releasing the layout.

This page organizes the official product information into a design-oriented view covering USB speed, port topology, logic voltage, configuration options, package considerations, application fit, and replacement limitations. It also distinguishes confirmed device functions from assumptions that require engineering verification against the manufacturer datasheet.

Alternativas drop-in para TUSB2036AVF — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com TUSB2036AVF (mesmo formato e footprint) — diferindo em Logic Technology, Package.

Texas Instruments
Logic Technology: 3.3-V CMOS ASIC (digital state machine)
Package: 32-LQFP (7x7 mm)
Comparar com TUSB2036AVF →

TUSB2036VFR

✅ Drop-In ⚠️ Especificações não verificadas
Texas Instruments
📦 TQFP-32
USB Hub Controller · USB 2.0 compliant (full-speed) · 12 Mbps (full-speed) · 2 or 3 (programmable) · 1 · 3.3 V · 3.3-V CMOS ASIC (digital state machine) · No (state-machine based)

Consulte o preço

Ver ficha técnica →

TUSB2036AVF Especificações

Device Type 2/3-port USB full-speed hub controller
USB Data Rate 12 Mbps
Upstream Port Count 1 port
Downstream Port Count 2 or 3 programmable ports
Downstream Port Selection Input-pin controlled
Tensão de alimentação 3.3 V
Logic Technology 3.3-V CMOS
USB Transceivers Integrated for upstream and downstream ports
USB Compliance USB 2.0 full-speed hub
Configuration Interface Optional serial EEPROM interface
Control Architecture Digital state machine
Firmware Requirement No firmware programming required
Encapsulamento 32-pin LQFP
Tipo de montagem Surface mount

Guia de Configuração de Pinos do TUSB2036AVF 32-pin lqfp

Configuração de pinos para TUSB2036AVF (pacote 32-pin lqfp). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.

Diagrama de pinagem do pacote 32-pin lqfp para TUSB2036AVF

Nenhum dado detalhado de pinagem disponível para TUSB2036AVF.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

TUSB2036AVF é adequado para 6 aplicaçãos: Legacy USB Printer Expansion, Industrial Data Acquisition, Embedded USB Peripheral Hub, USB-to-Multiple-Peripheral Adapter, Instrumentation Front Panel, Legacy Connectivity Adapter.

🖨️

Legacy USB Printer Expansion

The TUSB2036AVF can expand one full-speed USB host connection into two or three downstream ports for legacy printers, scanners, and similar peripherals. Its 12-Mbps USB full-speed operation matches the target device class, while integrated upstream and downstream transceivers reduce the external interface circuitry. The digital state-machine architecture also removes firmware programming from the hub design. Because the downstream count is selected by an input pin, the controller can support both two-port and three-port product configurations while retaining a common PCB architecture.

🏭

Industrial Data Acquisition

The TUSB2036AVF is suitable for industrial data-acquisition equipment that connects one host to multiple full-speed measurement peripherals. Its 12-Mbps operation, integrated transceivers, and firmware-free digital control simplify implementation of a multiport USB interface. The optional serial EEPROM path can preserve externally defined port configuration across power cycles. Board-level qualification should also verify operating temperature, ESD performance, ground strategy, and the electrical requirements of each attached peripheral before deployment in industrial environments.

🧩

Embedded USB Peripheral Hub

The TUSB2036AVF can provide an embedded hub function in a legacy control system, allowing one USB host connection to reach multiple internal or external full-speed peripherals. Its 3.3-V CMOS implementation and integrated transceivers are useful when minimizing the number of separate interface components. No firmware programming is required, which helps shorten development time. The design must still provide compliant downstream-port power control, stable 3.3-V distribution, and layout that preserves USB signal quality from the controller to each connector.

🔧

USB-to-Multiple-Peripheral Adapter

A standalone adapter can use the TUSB2036AVF to divide one upstream USB connection into two or three downstream full-speed connections. The controller handles the hub state machine and transceiver functions while the product-level board adds connectors, port protection, and power distribution. Its selectable two-port or three-port topology makes it useful across several adapter models. USB full-speed signaling should be routed as controlled differential pairs with minimized stubs and uninterrupted reference-plane continuity.

🖥️

Instrumentation Front Panel

Test and measurement instruments can use the TUSB2036AVF to connect a host controller with several full-speed service peripherals, such as a printer, calibration interface, or legacy storage device. The hub's firmware-free implementation reduces software-maintenance requirements, and its integrated transceivers simplify the analog interface layout. For professional instrumentation, confirm the operating-temperature range, grounding method, downstream-current budget, and electromagnetic-compatibility requirements before the board enters production.

🌐

Legacy Connectivity Adapter

The TUSB2036AVF fits adapter products intended to preserve compatibility with 12-Mbps USB full-speed peripherals. One host-side upstream port and input-pin-selected downstream ports allow a compact product to serve multiple devices without implementing a hub in a microcontroller. The optional EEPROM interface supports applications requiring persistent configuration. Designers should avoid using this device where a system expects high-speed USB operation, because 480-Mbps transfer performance is outside the controller's stated capability.

What is the Texas Instruments TUSB2036AVF?
The Texas Instruments TUSB2036AVF is a 12-Mbps USB full-speed hub controller that provides one upstream port and two or three programmable downstream ports. According to the manufacturer datasheet, it is a 3.3-V CMOS device with integrated USB transceivers for the upstream and downstream connections. It uses a digital state machine instead of a microcontroller, so hub firmware programming is not required. The device is packaged for surface-mount PCB assembly in an LQFP package.
How many USB ports does TUSB2036AVF support?
The TUSB2036AVF supports one upstream USB port and either two or three downstream USB ports. According to the manufacturer datasheet, the downstream-port count is selected by an input pin, allowing a single PCB design to support two-port and three-port configurations. Upstream connectivity is provided through one integrated transceiver, while separate downstream transceivers support the selected peripheral ports.
What USB speed does TUSB2036AVF support?
The TUSB2036AVF operates at 12 Mbps as a USB full-speed hub. According to the manufacturer datasheet, the device is compliant with the USB 2.0 specification as a full-speed hub and includes integrated transceivers for its upstream and downstream ports. It does not provide high-speed 480-Mbps USB operation, so it should be selected for full-speed peripherals rather than high-speed storage or video devices.
Does TUSB2036AVF require firmware programming?
No, the TUSB2036AVF does not require firmware programming. According to the manufacturer datasheet, the hub is implemented with a digital state machine rather than a microcontroller. That architecture provides deterministic port-management behavior without a firmware download step. The optional serial EEPROM interface can still be used when a system requires externally stored configuration or consistent port behavior after power-up.
What supply voltage does TUSB2036AVF use?
The TUSB2036AVF uses a 3.3-V supply and is implemented as a 3.3-V CMOS device. According to the manufacturer datasheet, the device combines this low-power logic implementation with integrated USB transceivers for every supported port. Decoupling and power-distribution values should be taken from the datasheet's recommended operating circuit and layout guidance when determining the exact capacitor values and placement.
Is TUSB2036AVF suitable for legacy full-speed USB devices?
Yes, the TUSB2036AVF is suitable for systems using 12-Mbps USB full-speed peripherals. According to the manufacturer datasheet, it supports one upstream port and two or three downstream ports in a USB 2.0-compliant full-speed hub implementation. It is appropriate for compatible legacy printers, industrial peripherals, data-acquisition equipment, and embedded accessories, but it cannot accelerate high-speed USB devices to their 480-Mbps operating mode.
How is the two-port or three-port mode selected on TUSB2036AVF?
The TUSB2036AVF selects its downstream-port count through an input pin. According to the manufacturer datasheet, this configuration supports either two or three downstream ports in the same hub implementation. The selected mode should match the PCB's connector and power architecture, and the input should be tied or driven to the logic state specified for the intended port count during schematic design.
What is the difference between TUSB2036AVF and TUSB2036VFR?
The TUSB2036AVF and TUSB2036VFR identify orderable variants associated with the same TUSB2036 hub-controller family, but the available search information does not establish that their order codes represent distinct electrical functions. Both refer to the 12-Mbps, 2/3-port USB full-speed hub with integrated transceivers. Before substituting one for the other, confirm the package, production ordering code, temperature range, and approved-part status against the manufacturer ordering information.
When should I choose TUSB2036AVF instead of a newer USB hub controller?
Choose the TUSB2036AVF when the design specifically needs a 12-Mbps USB full-speed hub with one upstream port, two or three downstream ports, integrated transceivers, and no firmware-programming step. A newer controller may be preferable when high-speed USB operation, additional modern host features, or a different power architecture is required. The key decision is matching the legacy full-speed peripheral ecosystem without paying for capabilities the product does not need.
Is TUSB2036AVF suitable for industrial USB data acquisition?
The TUSB2036AVF can suit industrial full-speed data-acquisition equipment that uses one host connection and two or three compatible USB peripherals. Its integrated transceivers and firmware-free digital state machine simplify the hub implementation, while the optional EEPROM interface supports externally stored configuration. The industrial suitability still depends on confirming the device's temperature rating, ESD and immunity requirements, lifecycle status, and peripheral compatibility.
What can replace TUSB2036AVF as a drop-in part?
No confirmed drop-in replacement for the TUSB2036AVF is established by the available manufacturer and cross-reference information. A valid replacement must match the 32-pin LQFP footprint, remain pin-to-pin compatible, preserve the input-pin-controlled two/three-port function, provide integrated 12-Mbps full-speed transceivers, and support the required 3.3-V supply. Use the manufacturer's cross-reference search with the exact orderable MPN, then validate timing, port power, and USB enumeration behavior.
Where can I download the TUSB2036AVF datasheet PDF?
The official TUSB2036AVF datasheet PDF is available from the Texas Instruments product link at https://www.ti.com/lit/ds/symlink/tusb2036.pdf. The document contains the device description, supported USB speed, port configurations, operating characteristics, pin descriptions, electrical specifications, and application guidance. Use the pin-description table and recommended-layout section when assigning PCB tracks and selecting the external configuration components.
Where can I find the TUSB2036AVF pinout?
The authoritative TUSB2036AVF pinout is in the pin-description table and package drawing in the official manufacturer datasheet. The TUSB2036AVF is ordered in a 32-pin LQFP package, so verify all 32 terminal assignments against the selected ordering code before layout release. Pay particular attention to supply connections, ground returns, USB differential pairs, the downstream-port-count selection input, and optional EEPROM signals.
Where to buy TUSB2036AVF online and what is its price?
Use the Request a Quote form on this page to inquire about the TUSB2036AVF, current pricing, stock, minimum order quantity, and lead time. The structured listing does not contain a confirmed quantity-break price table for this exact MPN, so no numerical price is published on this page. Include the required package, quantity, shipment destination, and production schedule when requesting the quotation.
What is the lead time and stock status for TUSB2036AVF?
Current stock and production lead time should be confirmed through the Request a Quote form on this page. The product information does not establish a fixed inventory quantity or standardized lead-time window for the TUSB2036AVF. For production planning, request confirmation of the exact order code, date code, package, reel quantity, and number of units required. Do not infer availability from a generic product page or marketplace listing.
What are the key specifications of TUSB2036AVF that engineers should know?
The TUSB2036AVF is a 3.3-V CMOS USB 2.0 full-speed hub controller with a 12-Mbps data rate, one upstream port, two or three input-pin-programmable downstream ports, integrated transceivers, and an optional serial EEPROM interface. According to the manufacturer datasheet, its digital state-machine architecture eliminates firmware programming. These features make it especially relevant to legacy full-speed USB expansion, industrial peripherals, printers, and embedded data-acquisition systems.

Dados de referência de engenharia para TUSB2036AVF — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the TUSB2036AVF when a product needs a compact, firmware-free USB 2.0 full-speed hub with one upstream connection and either two or three downstream connections. Its integrated transceivers, 3.3-V operation, and selectable port topology are particularly useful for legacy printers, industrial full-speed peripherals, embedded data-acquisition equipment, and compatibility adapters. It is not the preferred choice for high-speed USB storage, high-speed video, or designs requiring 480-Mbps operation. A confirmed drop-in substitute should not be selected merely because another controller also supports USB hubs: it must use the same 32-pin LQFP footprint, remain pin-to-pin compatible, preserve the two/three-port input selection, and provide equivalent transceiver and port-power behavior. When exact order-code substitution remains uncertain, use the Request a Quote form to request manufacturer-supported sourcing information.

Comparação com alternativas

Parâmetro Este produto
Device Type 2/3-port USB full-speed hub controller
Brand Texas Instruments
Package 32-pin LQFP
USB Data Rate 12 Mbps
Upstream Ports 1 port
Downstream Ports 2 or 3 programmable ports
Supply Voltage 3.3 V
Integrated Transceivers Yes, for upstream and downstream ports
Configuration Interface Optional serial EEPROM interface
Firmware Requirement No firmware programming required

Principais diferenciais

  • Firmware-free hub implementation (vs TUSB2046BVF)
  • Selectable downstream-port topology (vs TUSB2036VFR)
  • Integrated transceiver coverage (vs TUSB2036VFR)

Notas de projeto

Route each USB differential pair as a controlled, continuous pair with substantially uniform length and no unnecessary test pads or branch stubs. Keep the controller and the associated connector path compact, maintain a continuous reference plane beneath the pair, and avoid crossing unrelated high-current or switching-signal paths. Although the interface is 12-Mbps full-speed, disciplined pair routing reduces susceptibility to edge-rate harmonics and makes the design less dependent on connector or enclosure details.

Treat the 3.3-V rail and USB downstream power as separate design concerns. The TUSB2036AVF requires a stable 3.3-V CMOS supply, while enabled downstream ports may require power from external circuitry. Use the manufacturer-recommended decoupling arrangement at the controller and place the capacitors close to the relevant supply pins. Verify each downstream power switch against the current requirement of the attached peripheral and use the datasheet's startup and power-management guidance when sequencing ports.

Do not treat the TUSB2036AVF as a 480-Mbps high-speed USB hub controller. Its specified operating speed is 12 Mbps full-speed, and its downstream-port count is selected by an input rather than being freely configured through firmware. Verify the logic state, connector count, and port-power circuitry against the intended two-port or three-port product configuration. Also avoid assuming that the optional EEPROM interface is required; populate or bypass it according to the selected configuration strategy.

Keep USB connector protection, common-mode chokes, or other discrete interface components out of the high-speed return path unless their impact on the differential impedance has been evaluated. Maintain continuous ground-return paths beneath the USB signals and use the manufacturer's reference layout as the geometry baseline. Any extension from the board to an external cable should be considered part of the transmission-line problem, particularly if the product uses long internal leads or panel-mounted connectors.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The device is a USB interface controller rather than an automotive-qualified device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established by the product information and remain unknown.

Dados verificados em: 2026-11-10 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

TUSB2036AVF datasheet TUSB2036AVF datasheet pdf TUSB2036AVF pinout Texas Instruments TUSB2036AVF TUSB2036AVF 12Mbps USB hub TUSB2036AVF LQFP-32 TUSB2036AVF equivalent TUSB2036AVF replacement TUSB2036AVF cross reference TUSB2036AVF application circuit TUSB2036AVF price TUSB2036AVF stock TUSB2036AVF schematic TUSB2036AVF footprint TUSB2036AVF vs TUSB2046BVF

Componentes & termos relacionados

Texas Instruments TUSB2036AVF TUSB2036 TUSB2036VFR TUSB2046BVF USB hub controller USB interface controller Universal Serial Bus USB 2.0 USB full-speed 12 Mbps integrated USB transceiver digital state machine serial EEPROM interface 3.3-V CMOS logic LQFP-32 surface-mount package upstream USB port downstream USB port USB peripheral expansion industrial data acquisition legacy USB printer USB power distribution differential pair routing
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ