UCS-NVES1T9K1V - 1.9TB E1.S NVMe Gen4 SSD | Cisco
部品番号: UCS-NVES1T9K1V ⚠ ラストタイムバイ| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $3776 | $3,776.00 |
| 10 | $3720 | $37,200.00 |
| 100 | $3660 | $366,000.00 |
| 500 | $3600 | $1,800,000.00 |
| 1,000 | $3550 | $3,550,000.00 |
UCS-NVES1T9K1V 概要
An enterprise NVMe SSD is a solid state storage device that connects directly to the PCIe bus using the NVMe protocol, bypassing SATA/SAS controller bottlenecks to achieve lower latency and higher IOPS. Within the storage hierarchy, it sits as block storage below the server OS layer and above the raw NAND media; the E1.S (EDSFF) form factor is the compact successor to M.2 and U.2 drives, optimized for dense 1U/2U rack servers. Cisco qualifies specific drive PIDs for its UCS C-Series rack servers so that firmware, thermal profiles, and drive-slot mapping are fully supported under Cisco TAC.
Key characteristics of this drive include its 1.90 TB raw capacity, PCIe 4.0 NVMe x1 electrical interface, E1.S 15 mm mechanical format with an integrated drive carrier for UCS drive slots, and Kioxia XD7P NAND tuned for high performance with mid endurance - a fit for read/write-mixed enterprise workloads rather than extreme write-intensive caching. Cisco lists the supported host platform as the UCS C845A M8 AI Server, an NVIDIA MGX-based accelerated computing system.
In deployment, the UCS-NVES1T9K1V typically serves as local high-performance boot or data storage for AI training nodes, database servers, and virtualization hosts where NVMe Gen4 bandwidth reduces data loading time. Cisco validates drive-to-server interoperability through the UCS Hardware Compatibility List (HCL), so mixing unqualified third-party E1.S drives can void hardware support.
Design consideration: verify the target UCS server chassis and firmware release support E1.S Gen4 x1 drives via the Cisco UCS HCL before ordering, and note that the drive reaches Cisco end of sale on 2026-12-25, so long-term spares should be procured before that date.
This page synthesizes distributor pricing, lifecycle dates, platform compatibility, and procurement guidance for both the UCS-NVES1T9K1V and CAI-NVES1T9K1V SKUs in one place - information typically spread across Cisco, Ingram Micro, CDW, and lifecycle-tracking sources.
ドロップイン代替品: UCS-NVES1T9K1V — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: UCS-NVES1T9K1V （同一形状・フットプリント） — 相違点: Form Factor, Host Interface, Product Type, Storage Capacity.
クイック比較ツール — 並列比較する代替部品を選択:
この製品に利用可能なドロップイン代替品はありません。
代替品をリクエストUCS-NVES1T9K1V 最大定格＆電気的特性
| Storage Capacity | 1.90 TB |
| Form Factor | E1.S (15 mm) |
| Drive Type | Internal |
| Host Interface | PCI Express NVMe 4.0 (x1) |
| NAND Platform | Kioxia XD7P |
| Performance Class | High Performance, Mid Endurance |
| Product Type | Solid State Drive |
| Device Supported | Server |
| Compatible Platform | Cisco UCS C845A M8 AI Server |
| Product Series | Cisco UCS C-Series Rack Servers |
| Commercial SKU (cross-ref) | CAI-NVES1T9K1V |
| End of Sale Date | 2026-12-25 |
UCS-NVES1T9K1V standard ピン配置ガイド
UCS-NVES1T9K1V (standard パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: UCS-NVES1T9K1V.
詳細は データシート をご参照ください。
主な用途
UCS-NVES1T9K1V の用途: 6 件s: AI Training Node Local Storage, Database and Analytics Storage, Virtualization Host Boot and Data Drives, Hyperscale and Density-Optimized Storage Nodes, Last-Time-Buy Spares and Capacity Expansion, High-Performance Boot Drives for Accelerated Computing.
AI Training Node Local Storage
In the Cisco UCS C845A M8 AI Server, the UCS-NVES1T9K1V serves as local NVMe storage for training datasets, model checkpoints, and scratch space. Its PCIe NVMe 4.0 x1 interface delivers Gen4-class latency directly to the host CPU, and the Kioxia XD7P high-performance flash class keeps dataset streaming ahead of GPU consumption on the NVIDIA MGX platform. The 1.90 TB capacity point suits per-node dataset slices in multi-node clusters. As a mid-endurance drive, it handles daily checkpoint write bursts without excessive wear, but sustained write-heavy pipelines should be capacity-planned against the drive's DWPD rating. Because the drive is Cisco-qualified, firmware updates and health telemetry integrate with Cisco Intersight and IMC tooling.
おすすめ
Database and Analytics Storage
Enterprise databases benefit from the UCS-NVES1T9K1V's low queue depth latency and consistent performance, hallmarks of the Kioxia XD7P high-performance class. Deployed as local NVMe storage for indexes, temp tables, and hot tablespaces in UCS C-Series servers, the drive's NVMe 4.0 interface removes the SAS/SATA controller from the I/O path, cutting latency versus legacy spinning media by an order of magnitude. The 1.90 TB capacity balances density and cost for per-node database footprints. Mid-endurance NAND suits read-dominant OLTP and analytics profiles; write-intensive WAL-heavy configurations should verify endurance headroom in the UCS HCL and consider RAID or replication across multiple E1.S drives for availability.
おすすめ
Virtualization Host Boot and Data Drives
For VMware ESXi, KVM, or Proxmox hosts on Cisco UCS C-Series rack servers, the UCS-NVES1T9K1V provides high-IOPS local storage for VM datastores and hypervisor boot volumes. Cisco explicitly documents UCS hardware and firmware support for Proxmox deployments under existing support contracts, making this qualified drive a safe choice for that hypervisor. The NVMe 4.0 x1 link sustains mixed random workloads typical of consolidated virtualization, while E1.S (15 mm) hot-swap integration in UCS drive slots enables maintenance without downtime. Using the Cisco PID preserves Intersight drive health monitoring and warranty coverage; substituting unqualified third-party E1.S drives risks firmware rejection and forfeits TAC support.
おすすめ
Hyperscale and Density-Optimized Storage Nodes
The E1.S (EDSFF) form factor exists specifically to raise storage density in 1U and 2U servers, and the UCS-NVES1T9K1V's 15 mm variant maximizes thermal mass and per-drive capacity within that envelope. In UCS servers populated with multiple E1.S bays, arrays of this 1.90 TB drive deliver multi-TB NVMe pools with per-drive isolation, hot-swap serviceability, and front-serviceable cabling. Compared with M.2 or U.2 media, E1.S improves airflow and vibration tolerance in dense racks. The Kioxia XD7P mid-endurance class fits capacity-focused scale-out tiers, while the PCIe 4.0 x1 link per drive simplifies host fabric mapping via the UCS HCL-validated topology.
おすすめ
Last-Time-Buy Spares and Capacity Expansion
With Cisco end of sale set for 2026-12-25, the UCS-NVES1T9K1V is a prime last-time-buy candidate for operations teams maintaining fleets of UCS C845A M8 and compatible E1.S-equipped servers. Procuring spare drives before the end-of-sale date preserves hot-spare coverage, warranty continuity, and configuration consistency with installed base drives. Per Cisco HyperFlex and UCS equivalency documentation, equivalent UCS PIDs can also be ordered to expand storage capacity of existing clusters while keeping firmware support intact. Organizations should calculate fleet sparing ratios now - typically 2-5% for enterprise SSDs - and place consolidated orders before channel stock of the CAI-NVES1T9K1V SKU depletes.
おすすめ
High-Performance Boot Drives for Accelerated Computing
Accelerated computing nodes load multi-hundred-GB models and container images at boot; the UCS-NVES1T9K1V's NVMe Gen4 performance class shortens node provisioning and reboot cycles in AI clusters. As a boot device in the UCS C845A M8, it hosts the OS, hypervisor, and container runtime while separate drives carry datasets, giving clean separation of boot I/O from training data streams. The drive's Cisco qualification ensures the UCS IMC boot-order and drive-slot mapping work without manual intervention. administrators should image drives via Cisco-approved tooling and keep firmware aligned with the server bundle listed in the UCS HCL to maintain validated configurations.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: UCS-NVES1T9K1V — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 |
|---|---|
| Brand | Cisco Systems, Inc (Kioxia XD7P media) |
| Package / Form Factor | E1.S (15 mm) |
| Storage Capacity | 1.90 TB |
| Host Interface | PCIe NVMe 4.0 (x1) |
| Endurance Class | High Performance / Mid Endurance |
| Cisco Qualification (UCS HCL) | Qualified |
| End of Sale Date | 2026-12-25 |
| Unit Price (qty 1, as of 2026-10-19) | $3,776.00 |
主な差別化要因
- Cisco TAC-backed qualification （vs Generic Kioxia XD7P E1.S drives)
- EDSFF E1.S 15 mm density （vs Legacy 2.5-inch U.2 NVMe SSDs)
- Kioxia XD7P high-performance flash class （vs Read-intensive / value-tier NVMe drives)
設計ノート
Always validate the UCS-NVES1T9K1V against the Cisco UCS Hardware Compatibility List for your exact chassis and firmware bundle before ordering. Cisco qualifies drives per PID, and unlisted configurations can be rejected by UCS firmware or excluded from TAC hardware support. The HCL database was updated in October 2026; recheck it after any server firmware upgrade, since minimum drive firmware versions are bundle-specific.
Plan server power budgets for NVMe Gen4 E1.S drive slots using the Cisco C845A M8 spec sheet slot power figures rather than generic E1.S assumptions. Populating all E1.S bays with 15 mm drives raises both steady-state draw and peak inrush during hot-plug; verify backplane and PSU headroom at maximum drive count, and confirm airflow ducting supports 15 mm (vs 9.5 mm) drive thermal profiles.
Cisco end of sale is 2026-12-25 for this drive PID. After that date, replacement units come only from residual channel stock at escalating prices - Aztek listed $3,776 per unit as of 2026-10-19. Compute fleet sparing needs now (commonly 2-5% of installed drives for enterprise SSDs), consolidate a last-time-buy, and record the CAI-NVES1T9K1V commercial SKU on purchase orders for channel availability.
コンプライアンス情報
Compliance data was not stated in the provided distributor or Cisco sources. Request Cisco's regulatory data sheet for this PID for RoHS/REACH/WEEE declarations.
