Cirrus Logic Inc.

WM8737CLGEFL/R - 24-Bit Stereo ADC | Cirrus Logic | Audio

部品番号: WM8737CLGEFL/R ✓ 生産中
1.42 V to 3.6 V Vdss 32-QFN (5 x 5 mm) Package
MOQ: 1 |

WM8737CLGEFL/R 概要

The Cirrus Logic WM8737CLGEFL/R is a low-power stereo audio analog-to-digital converter with 24-bit resolution, operation up to 96 kHz, an SPI interface, and a 32-pin QFN package measuring 5 x 5 mm. The device combines stereo ADC conversion and microphone preamplifier functionality for compact digital audio systems.

An audio ADC is a signal-processing semiconductor that converts left- and right-channel analog voltages into digital sample data. It belongs to the ADC hierarchy within data-converter integrated circuits, where precision, bandwidth, noise performance, clocking, and interface efficiency determine suitability for recording, communication, and consumer audio equipment.

The WM8737CLGEFL/R supports 24-bit conversion at rates up to 96 kHz and uses a serial peripheral interface for digital data transfer. Its analog and digital supply range of 1.42 V to 3.6 V supports low-voltage portable and embedded designs. The operating temperature range of -25°C to +85°C covers industrial-room conditions, while the surface-mount QFN-32 package supports compact PCB construction.

The stereo ADC architecture is intended to capture two audio channels simultaneously, making the device suitable for microphone preamplification and stereo line-level digitization. A serial interface reduces the number of data connections compared with a parallel ADC and allows the converted audio stream to be transferred efficiently to a digital signal processor, audio controller, or system-on-chip.

Typical uses include digital microphones, voice-capture equipment, audio recording modules, soundbars, speaker systems, and portable consumer electronics. Low-power operation is particularly useful in battery-powered products where every milliampere affects run time. The small 5 x 5 mm footprint also helps designers retain a compact board area while implementing two-channel conversion.

PCB implementation requires careful separation of analog and digital return paths, placement of the exposed thermal pad, and a clean supply arrangement around the converter. Use the manufacturer datasheet for the complete pin-description table, recommended application circuit, exposed-pad layout, and supported interface timing before assigning tracks.

This page combines the manufacturer-device identity, package information, commercial inquiry path, technical application guidance, and available cross-reference information to help engineers evaluate the WM8737CLGEFL/R for low-voltage stereo audio acquisition systems.

ドロップイン代替品: WM8737CLGEFL/R — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

WM8737CLGEFL

✅ ドロップイン
📦 32-QFN (5 x 5 mm)
Same 24-bit, 96 kHz stereo ADC and SPI interface; ordering code differs by reel packaging only.

📋 参考代替品(カタログ未掲載)

WM8737CLGEFL/R 最大定格&電気的特性

ADC Resolution 24 bit
Maximum Sampling Rate 96 kHz
Number of ADC Channels 2 channels
Data Interface SPI serial interface
Analog Supply Voltage Range 1.42 V to 3.6 V
Digital Supply Voltage Range 1.42 V to 3.6 V
動作温度範囲 -25°C to +85°C
パッケージ 32-QFN (5 x 5 mm)
実装タイプ SMD surface mount
Exposed Pad Yes, QFN-32-EP
Device Type Stereo ADC with microphone preamplifier
Product Category ADCs/DACs - Special Purpose
Supplier Packaging Reel (TR)
Manufacturer Cirrus Logic Inc.
ライフサイクル状態 Active
RoHS ステータス Compliant

WM8737CLGEFL/R 32-qfn (5 x 5 mm) ピン配置ガイド

WM8737CLGEFL/R (32-qfn (5 x 5 mm) パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。

WM8737CLGEFL/R の 32-qfn (5 x 5 mm) パッケージピン配置図

詳細なピン配置データはありません: WM8737CLGEFL/R.

詳細は データシート をご参照ください。

主な用途

WM8737CLGEFL/R の用途: 6 件s: Stereo Digital Microphone Module, Voice-Controlled Audio Capture, Soundbar and Speaker System, Portable Audio Recorder, Communications Microphone Front End, Test and Measurement Audio Analyzer.

🎧

Stereo Digital Microphone Module

The WM8737CLGEFL/R fits a two-channel digital microphone module because it combines a 24-bit stereo ADC with microphone preamplifier functionality. Its SPI interface can transfer samples to a compact audio controller without requiring a wide parallel data bus. At sampling rates up to 96 kHz, the device supports higher-resolution capture than ordinary voice-only converters. Designers should configure the analog gain and microphone bias according to the manufacturer application circuit, then isolate the analog inputs from SPI and clock routing to preserve signal integrity.

📱

Voice-Controlled Audio Capture

The WM8737CLGEFL/R supports voice-command and hands-free products that require consistent stereo sampling before digital filtering. Its 24-bit conversion and sampling capability up to 96 kHz provide ample resolution for speech capture, while the SPI interface suits embedded processors with limited peripheral pin counts. Low-voltage analog and digital operation from 1.42 V to 3.6 V supports compact portable equipment. Firmware must configure the converter correctly, and the PCB should provide a quiet analog return path.

🔊

Soundbar and Speaker System

A soundbar can use the WM8737CLGEFL/R to digitize left and right audio inputs before volume, mixing, and loudspeaker processing. Two 24-bit channels at rates up to 96 kHz suit consumer audio paths where the host processor performs filtering or level management. The compact 32-QFN package preserves board area in a densely populated enclosure. Layout should separate the converter's analog inputs from amplifier power stages and switching circuitry, while following the manufacturer exposed-pad and grounding recommendations.

⚡

Portable Audio Recorder

The WM8737CLGEFL/R is suitable for portable recorders that capture stereo analog inputs and store or transmit the resulting digital audio. Its low-voltage supply range supports compact battery-powered architecture, while 24-bit resolution at up to 96 kHz provides flexible operating modes for music or speech recording. An SPI connection reduces host-processor wiring and can support deterministic data transfer. Designers should select input and gain settings from the electrical characteristics, account for the microphone or line-source impedance, and keep switching regulators away from sensitive analog nodes.

🌐

Communications Microphone Front End

The WM8737CLGEFL/R can serve as the analog-to-digital front end in communications equipment requiring two simultaneous capture channels. Its microphone preamplifier function and 24-bit ADC support voice-quality acquisition, while the SPI interface connects efficiently to a communications processor. The 1.42 V to 3.6 V operating range permits integration with low-voltage digital systems. Input filtering, gain, and clocking must be designed from the manufacturer recommended circuit, and analog ground routing should minimize the pickup of switching and high-speed digital signals.

🔧

Test and Measurement Audio Analyzer

The WM8737CLGEFL/R can provide the conversion stage for compact audio measurement equipment that evaluates stereo analog signals. Its 24-bit resolution and 96 kHz maximum sampling rate support waveform capture, frequency-response checks, and sound-level analysis when combined with suitable front-end circuitry. SPI enables captured samples to be transferred to a test controller or embedded processor. Calibration of the analog path, clock accuracy, input bandwidth, and software scaling remain system-level tasks, while the PCB should minimize ground coupling under changing test signals.

What is the WM8737CLGEFL/R?
The WM8737CLGEFL/R is a low-power, 24-bit stereo audio ADC with microphone preamplifier functionality from Cirrus Logic. According to the manufacturer datasheet, it converts two analog audio channels at rates up to 96 kHz, uses an SPI interface, and operates from a 1.42 V to 3.6 V analog and digital supply range. It is packaged in a 32-QFN package measuring 5 x 5 mm.
What are the key specifications of WM8737CLGEFL/R that engineers should know?
The WM8737CLGEFL/R combines 24-bit resolution, a maximum sampling rate of 96 kHz, two ADC channels, and an SPI serial interface. According to the manufacturer datasheet, its analog and digital supply range is 1.42 V to 3.6 V, its operating range is -25°C to +85°C, and its package is a 32-QFN with an exposed pad measuring 5 x 5 mm. These parameters position it for low-voltage stereo audio acquisition.
Where can I download the WM8737CLGEFL/R datasheet PDF?
The WM8737CLGEFL/R datasheet can be obtained through the manufacturer datasheet link listed on this page or through the Cirrus Logic datasheet page. The document contains the authoritative pin descriptions, electrical characteristics, application circuit, interface timing, exposed-pad requirements, and layout guidance. Engineers should use that document to verify signal names and pin assignments before laying out a 32-QFN board.
Where can I find the WM8737CLGEFL/R pinout?
The WM8737CLGEFL/R pin assignments are defined in the pin-description table of the manufacturer datasheet. The device uses a 32-QFN package with an exposed pad, so the exposed pad must also be connected according to the recommended layout. Use the datasheet pin table rather than inferring functions from package position, because power, ground, analog input, and digital interface signals have specific assignments.
Is the WM8737CLGEFL/R suitable for stereo microphone capture?
The WM8737CLGEFL/R is suitable for stereo microphone capture because it is identified as a stereo ADC with microphone preamplifier functionality. According to the manufacturer datasheet, it supports two channels, 24-bit conversion, and sampling rates up to 96 kHz. The input source, microphone bias, analog gain, and signal levels must still be designed around the detailed electrical characteristics and recommended application circuit.
What supply voltage does the WM8737CLGEFL/R require?
The WM8737CLGEFL/R operates from 1.42 V to 3.6 V for both analog and digital supplies. According to the manufacturer datasheet, the device supports low-voltage system architectures suitable for portable and embedded audio products. The exact regulator, bypass capacitors, sequencing, and allowable voltage combinations should follow the datasheet power-supply recommendations for the selected operating mode.
What interface does the WM8737CLGEFL/R use?
The WM8737CLGEFL/R uses an SPI serial interface to transfer converted audio data and configure the device. According to the manufacturer datasheet, the supported sampling rate reaches 96 kHz with 24-bit conversion. Because SPI timing and signal naming depend on the complete register and pin configuration, the host processor should be matched to the manufacturer timing diagram and mode requirements.
How does the WM8737CLGEFL/R compare with the WM8737CLGEFL?
The WM8737CLGEFL/R and WM8737CLGEFL identify the same Cirrus Logic stereo ADC family and both use the 32-QFN (5 x 5 mm) format with 24-bit conversion up to 96 kHz. Their device functionality and electrical ratings are therefore closely aligned. The distinguishing ordering code concerns reel packaging, so the correct variant must be selected to match the board assembler's component-handling requirements.
When should I choose the WM8737CLGEFL/R over a broader audio codec?
Choose the WM8737CLGEFL/R when the design specifically needs two 24-bit ADC channels, operation up to 96 kHz, an SPI interface, and a compact 32-QFN footprint. It is particularly appropriate for designs whose microphone or stereo capture path does not require the playback, mixer, or digital-audio functions of a full codec. Compare the required clocking, input range, gain control, and system software before finalizing the choice.
What is the best drop-in replacement for the WM8737CLGEFL/R?
The closest documented drop-in choice is the WM8737CLGEFL, which has the same Cirrus Logic 32-QFN (5 x 5 mm) device identity, 24-bit stereo ADC architecture, 96 kHz maximum rate, and SPI interface. The main ordering distinction is reel packaging. Confirm the exposed-pad connection, pin functions, electrical limits, and availability for the alternate ordering code before approving it for production.
Can another audio codec directly replace the WM8737CLGEFL/R?
A different audio codec should not be treated as a direct replacement merely because it also uses a 32-QFN package. The WM8737CLGEFL/R exposes a specific combination of ADC inputs, microphone preamplifier functions, SPI signals, clock requirements, power rails, and exposed-pad connections. A candidate must be checked pin by pin against the manufacturer pin table and functionally against the required 24-bit, 96 kHz stereo acquisition.
Where can I buy the WM8737CLGEFL/R online?
The WM8737CLGEFL/R can be requested through the Request a Quote form on this page, where the exact ordering code, reel packaging, quantity, and delivery requirements should be confirmed before an order is placed. The device is listed as active and is identified as an in-stock component in current channel information, but operational stock can change. Submit the required quantity and target date with the request.
What is the current price of the WM8737CLGEFL/R?
The current commercial price for the WM8737CLGEFL/R should be obtained through the Request a Quote form on this page. The platform handles current channel pricing and order configuration separately from the technical product record, allowing the quote to reflect quantity, reel packaging, delivery location, and supply status. Use the form to request the current unit and volume pricing for this exact ordering code.
What is the lead time and stock status of the WM8737CLGEFL/R?
The WM8737CLGEFL/R is identified as active, and current channel information describes the component as in stock. Stock quantities can still change rapidly, so engineers should request a quote for the exact reel quantity and provide the required delivery date. The Request a Quote form on this page is the appropriate path for confirming current availability, lead time, and order handling.
Is the WM8737CLGEFL/R RoHS compliant?
The WM8737CLGEFL/R is identified as RoHS compliant in component-library information for the exact ordering code. The manufacturer datasheet and current manufacturer product documentation should remain the controlling references for environmental declarations. Use the compliance record to support product qualification, but retain the manufacturer declarations in the design's compliance file for audit purposes.
What PCB layout considerations apply to the WM8737CLGEFL/R?
Place analog inputs, supply bypass capacitors, and grounding structures to minimize digital-to-analog coupling around the WM8737CLGEFL/R. The exposed thermal pad should be connected using the manufacturer land pattern and thermal-via recommendation, while digital clock and SPI routing should remain separated from sensitive analog nodes. The complete layout should follow the manufacturer's application circuit and package guidance for reliable EMI and signal integrity.

エンジニアリング参考データ: WM8737CLGEFL/R — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the WM8737CLGEFL/R when a compact system needs two 24-bit ADC channels, sampling up to 96 kHz, and a serial SPI connection to a controller. Its microphone preamplifier functionality and 32-QFN footprint are particularly useful in portable recorders, voice-capture modules, soundbars, and compact measurement equipment. Select the WM8737CLGEFL when the same electrical and pin configuration is needed but the required component-handling format is not the reel ordering code represented by the /R suffix. Do not substitute a generic audio codec solely because it also uses 32 pins; verify every power, clock, data, and analog-input assignment against the manufacturer pin table. A broader codec is preferable only when playback, mixing, or other digital-audio functions are required beyond the WM8737 family.

代替品との比較

パラメータ この製品 WM8737CLGEFL
Package 32-QFN (5 x 5 mm) 32-QFN (5 x 5 mm)
Brand Cirrus Logic Cirrus Logic
ADC Resolution 24 bit 24 bit
Maximum Sampling Rate 96 kHz 96 kHz
Number of Channels 2 ADC channels 2 ADC channels
Interface SPI SPI
Supply Voltage Range 1.42 V to 3.6 V 1.42 V to 3.6 V
Operating Temperature Range -25°C to +85°C -25°C to +85°C
Microphone Preamplifier Yes Yes
Mounting Type SMD surface mount SMD surface mount

主な差別化要因

  • Purpose-built stereo acquisition with microphone preamplification (vs WM8737CLGEFL)
  • Compact 32-QFN implementation (vs WM8737CLGEFL)
  • Low-voltage serial-interface ADC (vs WM8737CLGEFL)

設計ノート

Use the manufacturer QFN-32 land pattern and exposed-pad recommendation exactly. Place the input, output, and supply bypass capacitors close to their associated pins, and provide adequate thermal-via density beneath the exposed pad. Keep the pad connection compatible with the PCB's ground-plane strategy so that return currents do not cross sensitive microphone or analog input nodes.

Separate analog inputs from SPI data, clock, and switched-power traces. Route the microphone or line inputs as short, guarded traces over a continuous ground plane, and place input filtering close to the converter. This arrangement reduces capacitive pickup and common-impedance noise while preserving the low-voltage headroom available across the 1.42 V to 3.6 V supply range.

Do not assume that every similarly packaged audio converter is interchangeable. Confirm the microphone input, analog supply, digital supply, ground, clock, and SPI pins against the manufacturer pin-description table, then verify exposed-pad requirements and register behavior. A package drawing alone does not establish electrical compatibility or functional drop-in status.

コンプライアンス情報

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

RoHS compliance is identified for the exact ordering code. Other environmental declarations are not specified and remain unknown.

データ検証日: 2026-11-16 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

WM8737CLGEFL/R WM8737CLGEFL datasheet WM8737CLGEFL/R datasheet pdf WM8737CLGEFL pinout WM8737CLGEFL 32 QFN WM8737CLGEFL 24 bit 96 kHz WM8737CLGEFL SPI ADC WM8737CLGEFL supply voltage WM8737CLGEFL vs WM8731CLSEFL WM8737CLGEFL equivalent WM8737CLGEFL replacement WM8737CLGEFL price Cirrus Logic WM8737CLGEFL WM8737CLGEFL stereo ADC WM8737CLGEFL microphone preamplifier

関連部品&用語

Cirrus Logic Wolfson Microelectronics WM8737CLGEFL/R WM8737CLGEFL WM8731CLSEFL 24-bit ADC stereo ADC analog-to-digital converter data converter IC microphone preamplifier SPI 32-QFN QFN package family surface-mount package SMD 96 kHz sampling rate 1.42 V to 3.6 V supply RoHS digital audio acquisition portable audio recorder soundbar voice capture exposed pad
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示