WM8737CLGEFL/R - 24-Bit Stereo ADC | Cirrus Logic | Audio
MPN: WM8737CLGEFL/R ✓ 啟用中WM8737CLGEFL/R 概覽
An audio ADC is a signal-processing semiconductor that converts left- and right-channel analog voltages into digital sample data. It belongs to the ADC hierarchy within data-converter integrated circuits, where precision, bandwidth, noise performance, clocking, and interface efficiency determine suitability for recording, communication, and consumer audio equipment.
The WM8737CLGEFL/R supports 24-bit conversion at rates up to 96 kHz and uses a serial peripheral interface for digital data transfer. Its analog and digital supply range of 1.42 V to 3.6 V supports low-voltage portable and embedded designs. The operating temperature range of -25°C to +85°C covers industrial-room conditions, while the surface-mount QFN-32 package supports compact PCB construction.
The stereo ADC architecture is intended to capture two audio channels simultaneously, making the device suitable for microphone preamplification and stereo line-level digitization. A serial interface reduces the number of data connections compared with a parallel ADC and allows the converted audio stream to be transferred efficiently to a digital signal processor, audio controller, or system-on-chip.
Typical uses include digital microphones, voice-capture equipment, audio recording modules, soundbars, speaker systems, and portable consumer electronics. Low-power operation is particularly useful in battery-powered products where every milliampere affects run time. The small 5 x 5 mm footprint also helps designers retain a compact board area while implementing two-channel conversion.
PCB implementation requires careful separation of analog and digital return paths, placement of the exposed thermal pad, and a clean supply arrangement around the converter. Use the manufacturer datasheet for the complete pin-description table, recommended application circuit, exposed-pad layout, and supported interface timing before assigning tracks.
This page combines the manufacturer-device identity, package information, commercial inquiry path, technical application guidance, and available cross-reference information to help engineers evaluate the WM8737CLGEFL/R for low-voltage stereo audio acquisition systems.
直接替換替代品,適用於 WM8737CLGEFL/R — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
WM8737CLGEFL
✅ 直接替換📋 參考替代品(不在目錄中)
WM8737CLGEFL/R 最大額定值與電氣特性
| ADC Resolution | 24 bit |
| Maximum Sampling Rate | 96 kHz |
| Number of ADC Channels | 2 channels |
| Data Interface | SPI serial interface |
| Analog Supply Voltage Range | 1.42 V to 3.6 V |
| Digital Supply Voltage Range | 1.42 V to 3.6 V |
| 工作溫度範圍 | -25°C to +85°C |
| 封裝 | 32-QFN (5 x 5 mm) |
| 安裝類型 | SMD surface mount |
| Exposed Pad | Yes, QFN-32-EP |
| Device Type | Stereo ADC with microphone preamplifier |
| Product Category | ADCs/DACs - Special Purpose |
| Supplier Packaging | Reel (TR) |
| Manufacturer | Cirrus Logic Inc. |
| 生命週期狀態 | Active |
| RoHS 狀態 | Compliant |
WM8737CLGEFL/R 32-qfn (5 x 5 mm) 腳位配置指南
WM8737CLGEFL/R(32-qfn (5 x 5 mm) 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: WM8737CLGEFL/R.
請參閱 資料表 以查看完整腳位配置。
典型應用
WM8737CLGEFL/R 適用於 6 應用s: Stereo Digital Microphone Module, Voice-Controlled Audio Capture, Soundbar and Speaker System, Portable Audio Recorder, Communications Microphone Front End, Test and Measurement Audio Analyzer.
Stereo Digital Microphone Module
The WM8737CLGEFL/R fits a two-channel digital microphone module because it combines a 24-bit stereo ADC with microphone preamplifier functionality. Its SPI interface can transfer samples to a compact audio controller without requiring a wide parallel data bus. At sampling rates up to 96 kHz, the device supports higher-resolution capture than ordinary voice-only converters. Designers should configure the analog gain and microphone bias according to the manufacturer application circuit, then isolate the analog inputs from SPI and clock routing to preserve signal integrity.
推薦
Voice-Controlled Audio Capture
The WM8737CLGEFL/R supports voice-command and hands-free products that require consistent stereo sampling before digital filtering. Its 24-bit conversion and sampling capability up to 96 kHz provide ample resolution for speech capture, while the SPI interface suits embedded processors with limited peripheral pin counts. Low-voltage analog and digital operation from 1.42 V to 3.6 V supports compact portable equipment. Firmware must configure the converter correctly, and the PCB should provide a quiet analog return path.
推薦
Soundbar and Speaker System
A soundbar can use the WM8737CLGEFL/R to digitize left and right audio inputs before volume, mixing, and loudspeaker processing. Two 24-bit channels at rates up to 96 kHz suit consumer audio paths where the host processor performs filtering or level management. The compact 32-QFN package preserves board area in a densely populated enclosure. Layout should separate the converter's analog inputs from amplifier power stages and switching circuitry, while following the manufacturer exposed-pad and grounding recommendations.
推薦
Portable Audio Recorder
The WM8737CLGEFL/R is suitable for portable recorders that capture stereo analog inputs and store or transmit the resulting digital audio. Its low-voltage supply range supports compact battery-powered architecture, while 24-bit resolution at up to 96 kHz provides flexible operating modes for music or speech recording. An SPI connection reduces host-processor wiring and can support deterministic data transfer. Designers should select input and gain settings from the electrical characteristics, account for the microphone or line-source impedance, and keep switching regulators away from sensitive analog nodes.
推薦
Communications Microphone Front End
The WM8737CLGEFL/R can serve as the analog-to-digital front end in communications equipment requiring two simultaneous capture channels. Its microphone preamplifier function and 24-bit ADC support voice-quality acquisition, while the SPI interface connects efficiently to a communications processor. The 1.42 V to 3.6 V operating range permits integration with low-voltage digital systems. Input filtering, gain, and clocking must be designed from the manufacturer recommended circuit, and analog ground routing should minimize the pickup of switching and high-speed digital signals.
推薦
Test and Measurement Audio Analyzer
The WM8737CLGEFL/R can provide the conversion stage for compact audio measurement equipment that evaluates stereo analog signals. Its 24-bit resolution and 96 kHz maximum sampling rate support waveform capture, frequency-response checks, and sound-level analysis when combined with suitable front-end circuitry. SPI enables captured samples to be transferred to a test controller or embedded processor. Calibration of the analog path, clock accuracy, input bandwidth, and software scaling remain system-level tasks, while the PCB should minimize ground coupling under changing test signals.
推薦
推薦產品摘要
工程參考資料,適用於 WM8737CLGEFL/R — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | WM8737CLGEFL |
|---|---|---|
| Package | 32-QFN (5 x 5 mm) | 32-QFN (5 x 5 mm) |
| Brand | Cirrus Logic | Cirrus Logic |
| ADC Resolution | 24 bit | 24 bit |
| Maximum Sampling Rate | 96 kHz | 96 kHz |
| Number of Channels | 2 ADC channels | 2 ADC channels |
| Interface | SPI | SPI |
| Supply Voltage Range | 1.42 V to 3.6 V | 1.42 V to 3.6 V |
| Operating Temperature Range | -25°C to +85°C | -25°C to +85°C |
| Microphone Preamplifier | Yes | Yes |
| Mounting Type | SMD surface mount | SMD surface mount |
主要差異化特點
- Purpose-built stereo acquisition with microphone preamplification (對比WM8737CLGEFL)
- Compact 32-QFN implementation (對比WM8737CLGEFL)
- Low-voltage serial-interface ADC (對比WM8737CLGEFL)
設計說明
Use the manufacturer QFN-32 land pattern and exposed-pad recommendation exactly. Place the input, output, and supply bypass capacitors close to their associated pins, and provide adequate thermal-via density beneath the exposed pad. Keep the pad connection compatible with the PCB's ground-plane strategy so that return currents do not cross sensitive microphone or analog input nodes.
Separate analog inputs from SPI data, clock, and switched-power traces. Route the microphone or line inputs as short, guarded traces over a continuous ground plane, and place input filtering close to the converter. This arrangement reduces capacitive pickup and common-impedance noise while preserving the low-voltage headroom available across the 1.42 V to 3.6 V supply range.
Do not assume that every similarly packaged audio converter is interchangeable. Confirm the microphone input, analog supply, digital supply, ground, clock, and SPI pins against the manufacturer pin-description table, then verify exposed-pad requirements and register behavior. A package drawing alone does not establish electrical compatibility or functional drop-in status.
合規資訊
RoHS compliance is identified for the exact ordering code. Other environmental declarations are not specified and remain unknown.