AMD

XC4VLX25-10FF668I - 24,192-Cell Virtex-4 LX FPGA | AMD

部品番号: XC4VLX25-10FF668I ✗ 生産終了
1.2 V Vdss 668-ball FCBGA Package -10 Speed
MOQ: 1 |

XC4VLX25-10FF668I 概要

AMD XC4VLX25-10FF668I is a Virtex-4 LX field-programmable gate array with 24,192 logic cells, 448 I/O, and a 668-ball FCBGA package. The device is associated with a -10 speed grade and an industrial operating-temperature range of -40°C to 100°C. Its 90 nm CMOS implementation, 1.2 V core technology, and 1,028 MHz maximum clock frequency place it in the class of high-density FPGAs used for configurable logic, parallel processing, signal acquisition, and control systems.

A field-programmable gate array is a programmable digital integrated circuit whose logic, interconnect, and input/output behavior are configured after manufacture. An FPGA sits above simple programmable logic devices in the digital-semiconductor hierarchy because it combines programmable logic blocks, block RAM, programmable I/O, dedicated arithmetic resources, and user-selectable routing. The XC4VLX25 belongs to the Virtex-4 LX family, where LX identifies the general-purpose logic density and architecture tier.

The verified component listings identify 24,192 logic cells, 448 I/O, and a 668-ball grid-array package. This combination supports parallel datapaths and moderate-to-high pin counts on systems with complex control or interface requirements. The -10 designation identifies the performance grade, while the industrial suffix identifies the intended temperature class. A lead-free G-terminal variant of the same speed grade is also listed, providing a sourcing option where the required qualification and board-compatibility conditions are satisfied.

The FPGA uses 90 nm CMOS technology and operates from a 1.2 V core supply according to the family-level comparison information. Its maximum clock frequency is listed as 1,028 MHz. Actual design performance depends on the selected Xilinx development environment, device configuration, clocking topology, memory interfaces, routing congestion, and the speed grade of the production device; a theoretical maximum clock should not be treated as a guaranteed system operating frequency.

Typical Virtex-4 LX design uses cases include industrial control, networking equipment, instrumentation, telecommunications, embedded signal processing, test systems, and high-speed interface aggregation. The 448-I/O device is particularly useful where multiple buses, parallel converters, memory interfaces, clocks, and control signals must coexist on one programmable device. Its relatively large 668-ball package also requires careful PCB layout, power planning, and thermal analysis.

Replacement planning should begin with the exact package and device family because footprint compatibility alone does not guarantee an interchangeable design. AMD support guidance identifies another XC4VLX25 in the same package as the fully compatible route, with speed grade and temperature grade determining suitability. PCB designers must also verify power sequencing, configuration memory, bank voltages, decoupling, differential I/O requirements, and the generated bitstream before approving a substitution.

This page consolidates the device identity, package, temperature class, speed grade, and sourced replacement paths into an engineering-focused comparison. It also separates documented selection criteria from design-dependent performance, helping teams evaluate FPGA replacements without overlooking temperature, tooling, bitstream, or PCB compatibility requirements.

ドロップイン代替品: XC4VLX25-10FF668I — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: XC4VLX25-10FF668I (同一形状・フットプリント) — 相違点: Device Type, Process Technology, Speed Grade, Package Type, Temperature Grade.

AMD
Speed Grade: -11
Temperature Grade: Commercial
比較対象 XC4VLX25-10FF668I →
AMD
Device Type: Virtex-4 LX field-programmable gate array (FPGA)
Process Technology: 90 nm
Speed Grade: -11
比較対象 XC4VLX25-10FF668I →

XC4VLX25-11FF668I

✅ ドロップイン
AMD
📦 668-BBGA FCBGA
Virtex-4 LX field-programmable gate array (FPGA) · 24,192 cells · 448 I/O · 1,327,104 bits · 24,192 slices · 90 nm · 1.2 V · -11

価格はお問い合わせください

データシートを見る →

XC4VLX25-11FF668C

✅ ドロップイン
AMD
📦 668-BBGA FCBGA
Virtex-4 LX field-programmable gate array · 24,192 cells · 448 I/O · 1,327,104 bits · 668-ball FCBGA · 90 nm CMOS · 1.2 V · -11

価格はお問い合わせください

データシートを見る →

XC4VLX25-10FFG668I

✅ ドロップイン
📦 668-BBGA FCBGA
Retains the -10 speed grade and industrial temperature suffix but uses the lead-free G-terminal designation; logic cells, I/O, and package remain the same.

📋 参考代替品(カタログ未掲載)

XC4VLX25-10FFG668C

✅ ドロップイン
📦 668-BBGA FCBGA
Retains the -10 speed grade and 668-ball package but changes to the lead-free G-terminal finish and commercial temperature suffix.

📋 参考代替品(カタログ未掲載)

XC4VLX25-11FFG668C

✅ ドロップイン
📦 668-BBGA FCBGA
Uses the faster -11 speed grade, lead-free G-terminal finish, and commercial temperature suffix while retaining the same family, logic-cell count, I/O, and package.

📋 参考代替品(カタログ未掲載)

XC4VLX25-10FF668I 最大定格&電気的特性

Device Type Virtex-4 LX field-programmable gate array
Logic Cells 24,192 cells
I/O Count 448 I/O
パッケージ 668-ball FCBGA
Package Type Grid-array, BGA
Package Height 2.85 mm
Speed Grade -10
動作温度 -40°C to 100°C
Process Technology 90 nm CMOS
Core Supply Voltage 1.2 V
最大クロック周波数 1,028 MHz
Product Type IC FPGA
Terminals 668 terminals
実装スタイル Surface mount
Terminal Pitch 1.000 mm

XC4VLX25-10FF668I 2.85 mm ピン配置ガイド

XC4VLX25-10FF668I (2.85 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。

XC4VLX25-10FF668I の 2.85 mm パッケージピン配置図

詳細なピン配置データはありません: XC4VLX25-10FF668I.

詳細は データシート をご参照ください。

主な用途

XC4VLX25-10FF668I の用途: 6 件s: Industrial Control Systems, Signal Acquisition and Processing, Telecommunications Equipment, Test and Measurement, Audio and Communication Processing, Industrial Networking Gateway.

🏭

Industrial Control Systems

The XC4VLX25-10FF668I fits industrial controllers requiring 448 I/O to connect sensors, actuators, counters, and parallel industrial buses. Its listed industrial range of -40°C to 100°C supports equipment operating across widely varying ambient conditions. The 24,192-cell Virtex-4 LX device can implement control logic, state machines, communication protocols, and supervisory functions in one programmable device. Designers should allocate I/O banks according to voltage requirements, use the manufacturer power and decoupling guidance, and regenerate timing constraints for the exact -10 production grade before release.

📡

Signal Acquisition and Processing

The XC4VLX25-10FF668I can serve as the programmable processing core in acquisition equipment because its 24,192 logic cells and 448 I/O support parallel data capture, digital filtering, clocking, and control. The listed 1,028 MHz maximum device clock provides substantial timing headroom for appropriately pipelined designs, although system rates depend on routing and external interface timing. A practical implementation separates sensitive analog capture from the FPGA, applies controlled clocking, and uses deterministic I/O constraints. Timing closure and power analysis must use the selected -10 speed grade rather than the family maximum alone.

🌐

Telecommunications Equipment

The Virtex-4 LX architecture and 448 available I/O make the XC4VLX25-10FF668I applicable to telecommunications line cards, multiplexers, protocol converters, and packet-processing modules. The -10 grade provides a defined performance class for industrial telecommunications equipment, while the 668-ball package supports dense connections to memory, transceivers, clocks, and backplanes. Designers must maintain complete pinout, voltage, decoupling, and differential-signal integrity across the large BGA footprint. Configuration should use a supported boot or JTAG method, and the production bitstream must be regenerated when the exact replacement speed grade changes.

🖥️

Test and Measurement

In test and measurement systems, the XC4VLX25-10FF668I can implement timing control, pattern generation, acquisition logic, and communication protocols in parallel. Its 448 I/O reduces the need for external glue logic when connecting multiple instrument buses, trigger lines, converters, and status signals. The listed 1,028 MHz maximum clock is useful for timing architecture planning but does not guarantee equivalent performance at every I/O boundary. Use synchronous design practices, constrain all interface timing paths, and validate clock jitter, skew, and I/O drive requirements against the target measurement specifications.

🎧

Audio and Communication Processing

The XC4VLX25-10FF668I is suitable for programmable audio gateways, synchronizers, channel processors, and communication adapters because it combines 24,192 logic cells with a high I/O count. It can perform sample-rate conversion control, framing, routing, monitoring, and interface adaptation while leaving dedicated converters connected through digital audio interfaces. The industrial temperature range supports equipment intended for extended environmental operation. Audio-system designs must control clocking and grounding carefully, since deterministic clock distribution and clean supply rails are as important as raw logic throughput for low-jitter signal handling.

🌐

Industrial Networking Gateway

The XC4VLX25-10FF668I can implement protocol bridging, traffic classification, buffering control, and supervisory logic in industrial Ethernet gateways. Its 448 I/O provides connectivity for multiple network interfaces, management ports, indicators, and local storage devices. The -10 industrial speed grade supports systems requiring a defined timing class across -40°C to 100°C operation. Because this is a large FCBGA device, successful implementation depends on clean power rails, careful layer transitions, solid return paths under high-speed nets, and manufacturer-recommended decoupling. Validate post-layout timing for every supported network rate.

What is the XC4VLX25-10FF668I?
The XC4VLX25-10FF668I is an AMD Virtex-4 LX FPGA containing 24,192 logic cells and 448 I/O in a 668-ball FCBGA package. According to the AMD and distributor product listings, it uses 90 nm CMOS technology, is associated with the -10 speed grade, and has an industrial temperature range of -40°C to 100°C. It is intended for configurable logic, signal-processing, control, telecommunications, and instrumentation systems requiring high pin density and programmable digital resources.
Where can I download the XC4VLX25-10FF668I datasheet?
The XC4VLX25-10FF668I datasheet and product resources should be obtained from AMD or Xilinx documentation for the Virtex-4 LX family. The AMD support page for XC4VLX25 replacement is the verified manufacturer resource associated with this device. Use the family datasheet for the complete pin list, electrical tables, configuration requirements, package drawings, and bitstream information rather than relying on a distributor summary.
What is the pinout for XC4VLX25-10FF668I?
The XC4VLX25-10FF668I uses a 668-ball FCBGA package with a listed terminal pitch of 1.000 mm, so a simple numbered pin list cannot be represented accurately without the manufacturer package drawing. Use the pin-description table and BGA ball map in the Virtex-4 LX datasheet when assigning power, ground, configuration, clock, and user I/O balls. Board layout must follow the exact package drawing for the FF668 package.
What are the key specifications of XC4VLX25-10FF668I?
The principal specifications are 24,192 logic cells, 448 I/O, a 668-ball FCBGA package, 90 nm CMOS process technology, a 1.2 V core voltage, and a listed maximum clock frequency of 1,028 MHz. According to AMD and distributor listings, the device is in the -10 speed grade and the industrial temperature range of -40°C to 100°C. Design timing must be evaluated using the actual tool, speed grade, and constraints.
Can XC4VLX25-10FFG668I replace XC4VLX25-10FF668I?
The XC4VLX25-10FFG668I is a same-family, same-speed-grade candidate with the same 668-ball package and lead-free terminal designation, while the target is identified as industrial grade. According to the listed cross-reference information, the G variant provides the same core specifications with a lead-free terminal finish. Before substitution, confirm that the G variant's temperature rating satisfies the target's -40°C to 100°C requirement and that board, procurement, and bitstream requirements are unchanged.
What can replace XC4VLX25-10FF668I on the same PCB?
The verified same-footprint replacement path is another XC4VLX25 device, such as XC4VLX25-11FF668I, XC4VLX25-11FF668C, or a compatible G-terminal variant. AMD guidance states that another XC4VLX25 in the same package is the fully compatible option. Speed grade and temperature grade remain the critical checks: a faster grade can change timing, while a commercial-temperature part may not replace an industrial-temperature part without environmental qualification.
Is XC4VLX25-11FF668I a drop-in replacement for XC4VLX25-10FF668I?
The XC4VLX25-11FF668I is a same-package, same-family replacement candidate with a faster -11 speed grade and industrial temperature designation. The package remains 668-ball FCBGA and the verified listings retain 24,192 logic cells and 448 I/O. According to the comparison information, terminals and packages are consistent, but timing constraints and power behavior must be revalidated for the -11 grade before production release.
When should I choose XC4VLX25-11FF668C instead of XC4VLX25-10FF668I?
Choose the XC4VLX25-11FF668C when the existing board requires the same 668-ball footprint but a faster -11 performance grade and a commercial operating-temperature class are acceptable. According to the replacement listing, it retains the same package and principal device characteristics. It is not the automatic choice for a -40°C to 100°C industrial environment; confirm enclosure temperature, timing margin, and qualification requirements before substitution.
Is XC4VLX25-10FF668I suitable for industrial control systems?
The XC4VLX25-10FF668I is listed with an industrial operating-temperature range of -40°C to 100°C, making it suitable for many industrial control environments when other system requirements are met. Its 448 I/O support parallel sensors, converters, communication interfaces, and discrete control signals. Designers should still validate power-supply tolerance, EMC requirements, thermal performance, and any customer-specific qualification requirements.
Where can I buy XC4VLX25-10FF668I?
Use the Request a Quote form on this page to request XC4VLX25-10FF668I availability, lot traceability, condition, and lead time. Because this is an older Virtex-4 LX FPGA, useful procurement details include the exact -10 speed grade, industrial suffix, 668-ball package, date code, and whether the assembly must include a genuine programmed configuration memory device. These details allow the request to be matched to the correct assembled part.
What is the price of XC4VLX25-10FF668I?
Current commercial pricing for the exact XC4VLX25-10FF668I should be obtained through the Request a Quote form on this page. A responsible quote must identify the exact suffix, package, assembly condition, programmed configuration memory status, traceability requirements, and delivery quantity. Legacy FPGA values can vary materially with condition and lot availability, so a generic family price is not an adequate substitute for a quotation on this MPN.
What is the lead time for XC4VLX25-10FF668I?
The current lead time for XC4VLX25-10FF668I must be confirmed through the Request a Quote form on this page. For an obsolete or legacy FPGA, lead time depends on exact suffix matching, die or assembly inventory, configuration-memory programming, traceability, and required quantity. Providing the target quantity, date-code preference, and programmed-memory requirement with the request enables a more actionable scheduling response.
Is XC4VLX25-10FF668I in stock?
Stock status for the exact XC4VLX25-10FF668I must be confirmed through the Request a Quote form on this page. A useful request should specify the -10 speed grade, industrial temperature suffix, 668-ball FCBGA package, acceptable date codes, and whether a configuration memory device is required. Generic family availability should not be treated as availability of this exact assembled MPN.
What is the difference between XC4VLX25-10FF668I and XC4VLX25-10FFG668C?
The XC4VLX25-10FF668I is identified as an industrial-grade -10 device, while the XC4VLX25-10FFG668C is listed as the same core specification with a lead-free G-terminal finish and commercial suffix. Both use the 668-ball package and -10 speed grade. According to the cross-reference information, the principal difference is terminal finish and temperature class, so the G variant requires temperature suitability confirmation for industrial deployment.
How do I validate an XC4VLX25 replacement for a PCB design?
Validate an XC4VLX25 replacement by confirming the exact family, 668-ball footprint, speed grade, temperature range, terminal finish, core and I/O power architecture, configuration method, and supported Xilinx tools. AMD states that another XC4VLX25 in the same package is the fully compatible route. After hardware checks, recompile the design with the production part selected, review timing and power reports, generate the appropriate bitstream, and perform board-level validation.

エンジニアリング参考データ: XC4VLX25-10FF668I — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the XC4VLX25-10FF668I when an existing industrial design specifically requires the -10 speed grade, industrial temperature class, standard terminal suffix, and 668-ball Virtex-4 LX footprint. Select XC4VLX25-11FF668I or XC4VLX25-11FF668C when the same package and logic density are required but the faster -11 grade is needed; the I version preserves industrial temperature positioning, while the C version changes to commercial temperature. Choose XC4VLX25-10FFG668I when an industrial-grade, -10-speed, lead-free G-terminal option is required. The -10 G commercial part XC4VLX25-10FFG668C preserves timing class but may be unsuitable for a -40°C to 100°C environment. XC4VLX25-11FFG668C combines the faster grade with the lead-free designation but is commercial grade. Before choosing any alternative, regenerate timing and power reports, verify supported tooling, and confirm configuration and bitstream compatibility.

代替品との比較

パラメータ この製品 XC4VLX25-11FF668I XC4VLX25-11FF668C XC4VLX25-10FFG668I XC4VLX25-10FFG668C XC4VLX25-11FFG668C
Package 668-BBGA FCBGA 668-BBGA FCBGA 668-BBGA FCBGA 668-BBGA FCBGA 668-BBGA FCBGA 668-BBGA FCBGA
Brand AMD AMD AMD AMD AMD AMD
FPGA Family Virtex-4 LX Virtex-4 LX Virtex-4 LX Virtex-4 LX Virtex-4 LX Virtex-4 LX
Logic Cells 24,192 cells 24,192 cells 24,192 cells 24,192 cells 24,192 cells 24,192 cells
I/O Count 448 I/O 448 I/O 448 I/O 448 I/O 448 I/O 448 I/O
Speed Grade -10 -11, approximately 10% faster grade designation -11, approximately 10% faster grade designation -10, same speed grade -10, same speed grade -11, approximately 10% faster grade designation
Temperature Class Industrial, -40°C to 100°C Industrial Commercial Industrial Commercial Commercial
Terminal Finish Standard suffix; specific finish not stated Standard suffix Standard suffix Lead-free G-terminal designation Lead-free G-terminal designation Lead-free G-terminal designation
Process Technology 90 nm CMOS 90 nm CMOS 90 nm CMOS 90 nm CMOS 90 nm CMOS 90 nm CMOS
Core Voltage 1.2 V 1.2 V 1.2 V 1.2 V 1.2 V 1.2 V
Terminal Pitch 1.000 mm 1.000 mm 1.000 mm 1.000 mm 1.000 mm 1.000 mm

主な差別化要因

  • Retains the complete industrial-grade identity when moving to a lead-free package option (vs XC4VLX25-10FFG668I)
  • Provides a faster same-package option while preserving logic density and pin count (vs XC4VLX25-11FF668I)
  • Maintains the exact -10 speed grade for timing-sensitive redesigns (vs XC4VLX25-11FF668C)
  • Combines a -11 speed grade with a lead-free terminal designation (vs XC4VLX25-11FFG668C)

設計ノート

Treat the FF668 footprint as a dense, fine-pitch BGA and follow the exact manufacturer ball map, layer stack, and escape-routing guidance. The listed terminal pitch is 1.000 mm, so manufacturing capability, solder-mask definition, via-in-pad use, and board-flatness must be reviewed with the PCB fabricator. Preserve access to configuration pins and confirm that every power and ground ball follows the recommended plane or via pattern.

Before substituting a speed or temperature grade, re-run static and dynamic power analysis and compare I/O current against the exact replacement's electrical limits. A linear change in logic count does not establish equivalent power because speed grade, activity, I/O loading, configuration method, and terminating state can change current. Use manufacturer-recommended supply sequencing, decoupling values, and plane connections for the selected suffix.

A matching BGA footprint does not by itself establish a drop-in replacement. Verify device family, speed grade, temperature class, terminal finish, configuration interface, supported Xilinx tooling, and bitstream compatibility. After changing the exact part, select it in the project, rebuild constraints, review timing and power reports, regenerate the bitstream, and verify configuration over JTAG and the intended production boot path.

Use continuous reference planes and controlled-return routing for high-speed interfaces, especially when the 668-ball package combines external memory, clocks, and I/O. Follow the manufacturer's constraints for length matching, differential pairs, and I/O drive or slew settings. Confirm expansion-board and backplane loss, connector discontinuities, clock jitter, and board skew with realistic timing analysis rather than relying only on device maximum-frequency data.

The package height is listed as 2.85 mm, but the complete thermal resistance and maximum junction-temperature conditions must be taken from the manufacturer package information for the exact board stack-up. Estimate total dissipation from core and I/O power, then confirm copper area, airflow, and adjacent heat sources. Do not reuse thermal margins from another grade or assembly without recalculating the worst-case operating condition.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The target's standard suffix is not identified as lead-free. A separate G-terminal variant is explicitly described as Pb-free in the cross-reference information. No verified RoHS, REACH, AEC-Q100, halogen-free, or conflict-minerals declaration is available for the exact target MPN.

データ検証日: 2026-11-14 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

xc4vlx25 10ffg668c xc4vlx25 11ffg668c XC4VLX25-10FF668I datasheet XC4VLX25-10FF668I pinout XC4VLX25-10FF668I equivalent XC4VLX25-10FF668I replacement XC4VLX25-10FF668I price XC4VLX25-10FF668I stock AMD XC4VLX25-10FF668I XC4VLX25-10FF668I vs XC4VLX25-11FF668I XC4VLX25-10FF668I footprint XC4VLX25-10FF668I industrial FPGA

関連部品&用語

AMD Xilinx XC4VLX25-10FF668I XC4VLX25-11FF668I XC4VLX25-11FF668C XC4VLX25-10FFG668I XC4VLX25-10FFG668C XC4VLX25-11FFG668C Virtex-4 LX field-programmable gate array FPGA programmable logic device configurable logic programmable input/output 668-ball FCBGA BGA package fine-pitch grid array surface-mount package 24,192 logic cells 448 I/O 90 nm CMOS 1.2 V core voltage -10 speed grade industrial temperature range bitstream compatibility
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示