XC4VLX25-11FFG668C - 24,192-Cell Virtex-4 LX FPGA | AMD
部品番号: XC4VLX25-11FFG668C ✗ 生産終了XC4VLX25-11FFG668C 概要
A field-programmable gate array is a semiconductor whose logic, interconnect, and I/O resources can be configured after fabrication. The FPGA product hierarchy extends from programmable logic devices to field-programmable gate arrays and then to general-purpose semiconductor logic. Virtex-4 LX devices combine configurable logic blocks, block RAM, dedicated DSP resources, and selectable I/O standards within a single CMOS device.
The XC4VLX25 device provides 24,192 logic cells organized into 2,688 configurable logic blocks. Its 448 I/O sites support board-level connectivity for parallel buses, control signals, high-speed interfaces, memory connections, and external peripherals. The 668-ball FCBGA package uses a 1.00 mm ball pitch, providing a compact surface-mount solution for dense FPGA boards. The -11 designation identifies the device's performance grade.
The -11 grade can reach a maximum clock frequency of 1,205 MHz according to the listed device specifications. This performance is useful for parallel data processing, protocol handling, digital filtering, embedded control, and accelerator logic. The 24,192-cell density provides substantially more logic capacity than a basic programmable-logic device while retaining the flexibility of FPGA configuration and field upgrades.
Typical uses include industrial control systems, communications infrastructure, instrumentation, video-processing front ends, test equipment, and embedded signal-processing platforms. Engineers can implement finite-state machines, parallel datapaths, packet-processing engines, and mixed control/logic functions in one device. The 448 I/O sites also allow high pin-count designs to be consolidated without relying on several lower-density programmable components.
PCB design should follow the AMD package pinout files for the exact ordering code and ball assignment. Differential pairs, supply distribution, decoupling, and configurable I/O standards require careful planning because a footprint-compatible replacement does not automatically guarantee identical timing, voltage, or legacy package behavior. Verify the bitstream target and system constraints before substituting another grade.
This product page combines the key device identity, package facts, upgrade paths, application guidance, and engineering cautions needed to evaluate the XC4VLX25-11FFG668C. It also distinguishes true same-package family alternatives from broader FPGA conversions that require different tools, footprints, bitstreams, or board-level redesign.
ドロップイン代替品: XC4VLX25-11FFG668C — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: XC4VLX25-11FFG668C (同一形状・フットプリント) — 相違点: Device Type, Package Type, Speed Grade, Package, Process Technology.
XC4VLX25-11FFG668I
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC4VLX25-10FFG668C
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC4VLX25-11FFG668CS2
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XC4VLX25-11FF668C
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC4VLX25-11FF668I
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC4VLX25-11FFG668C 最大定格&電気的特性
| Device Type | Virtex-4 LX Field-Programmable Gate Array |
| Logic Cells | 24,192 cells |
| Configurable Logic Blocks | 2,688 CLBs |
| 最大クロック周波数 | 1,205 MHz |
| I/O Count | 448 I/O |
| Process Technology | CMOS |
| Speed Grade | -11 |
| パッケージ | 668-ball FCBGA |
| Package Type | 668-BBGA / FCBGA |
| Ball Pitch | 1.00 mm |
| 実装タイプ | Surface Mount |
| Lead-Free Status | Pb-free |
| Programmable I/O | 448 programmable I/O sites |
XC4VLX25-11FFG668C 668-bbga / fcbga ピン配置ガイド
XC4VLX25-11FFG668C (668-bbga / fcbga パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: XC4VLX25-11FFG668C.
詳細は データシート をご参照ください。
主な用途
XC4VLX25-11FFG668C の用途: 6 件s: Industrial Automation and Control, Communications and Packet Processing, Test and Measurement Instrumentation, Digital Signal Processing and Acceleration, Video and Image Processing Front Ends, Aerospace and Defense Control Systems.
Industrial Automation and Control
The XC4VLX25-11FFG668C fits centralized industrial controllers that combine sequencing, machine-state monitoring, safety interlocks, and communications in one FPGA. Its 24,192 logic cells and 2,688 configurable logic blocks provide room for parallel control logic, while 448 I/O sites support encoders, discrete sensors, actuator drivers, and industrial buses. The -11 grade reaches a listed maximum frequency of 1,205 MHz, providing useful timing margin for pipelined acquisition and protocol processing. Place the device in a 668-ball FCBGA layout with controlled clock distribution, local decoupling, and isolated I/O paths so switching and high-current industrial interfaces do not degrade the core supply or signal integrity.
おすすめ
Communications and Packet Processing
The XC4VLX25-11FFG668C is appropriate for fixed-function communications equipment requiring parallel framing, filtering, buffering, and protocol termination. Its 24,192 logic cells can implement multiple concurrent datapaths, and the 448 I/O sites simplify connections to transceivers, backplane interfaces, and parallel fabric devices. The -11 grade's 1,205 MHz maximum clock frequency supports demanding word-parallel processing when external memory interfaces are designed for the target operating condition. For a production design, match the selected XC4VLX25 variant to the transceiver voltage levels, use the official package pinout for signal assignment, and validate source-synchronous timing, clock-jitter tolerance, and electromagnetic performance at the board level.
おすすめ
Test and Measurement Instrumentation
The XC4VLX25-11FFG668C can implement timing, pattern generation, acquisition, and control functions within a high-density instrument. The 24,192 logic cells support parallel datapaths and digital signal processing, while 448 I/O sites provide connections to converters, memory, trigger logic, and communication interfaces. Its -11 performance grade offers additional timing margin over the XC4VLX25-10FFG668C for demanding instrument timing. Because this is a large 668-ball FCBGA, board assembly requires fine-pitch assembly capability, careful ball-to-pad registration, and adequate thermal spreading beneath the package. Validate analog noise isolation, reference-clock jitter, and trigger crosstalk as part of the complete instrument design rather than relying on FPGA timing alone.
おすすめ
Digital Signal Processing and Acceleration
The XC4VLX25-11FFG668C suits pipelined filtering, correlation, waveform analysis, and custom accelerator functions because its 24,192 logic cells provide substantial parallel capacity. The -11 grade can reach a listed 1,205 MHz, allowing multiplier-free or distributed-arithmetic pipelines to operate at high clock rates, although final throughput depends on routing, memory resources, and I/O timing. The 448 I/O sites help connect streaming data, coefficient memory, and control/status signals without excessive multiplexing. Implement internal registers on high-speed interfaces, add pipeline stages where required, and verify post-route timing for the selected bitstream. Avoid treating the maximum device frequency as an achievable system-interface rate without accounting for external clock and I/O constraints.
おすすめ
Video and Image Processing Front Ends
The XC4VLX25-11FFG668C can support pixel transport, color conversion, frame timing, test-pattern generation, and preprocessing in programmable video systems. Its 24,192 logic cells allow wide parallel datapaths, and the 448 I/O sites are useful for connecting external memory and video interface devices. The -11 speed grade helps timing-constrained horizontal and vertical processing pipelines, although supported display interfaces depend on I/O configuration and board-level connectivity. Route video signals according to the AMD package pinout and device timing guidelines, and keep high-speed transceiver or bridge circuitry physically separated from sensitive timing paths. Use the exact family ordering code to preserve compatibility with the compiled bitstream and the intended 668-ball PCB footprint.
おすすめ
Aerospace and Defense Control Systems
The XC4VLX25-11FFG668C can serve as the programmable core in mission-control, telemetry, signal-conditioning, and redundant sequencing systems where deterministic logic and parallel I/O are required. The device provides 24,192 logic cells, 2,688 CLBs, and 448 I/O sites within a 668-ball FCBGA package, while the -11 grade supplies additional timing margin for pipelined functions. Qualification and environmental suitability are not established by the ordering code alone; program managers should verify the exact package, temperature grade, radiation requirements, lifecycle status, and procurement documentation with AMD. Design the board for controlled supplies, clock integrity, fault containment, and thermal margin, and validate every proposed replacement against the original configuration and bitstream.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: XC4VLX25-11FFG668C — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | XC4VLX25-11FFG668I | XC4VLX25-10FFG668C | XC4VLX25-11FFG668CS2 | XC4VLX25-11FF668C | XC4VLX25-11FF668I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 668-ball FCBGA | 668-ball FCBGA - same package | 668-ball FCBGA - same package | 668-ball FCBGA - same package | 668-ball FCBGA - same package | 668-ball FCBGA - same package |
| Device Family | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX |
| Logic Cells | 24,192 cells | 24,192 cells | 24,192 cells | 24,192 cells | 24,192 cells | 24,192 cells |
| Configurable Logic Blocks | 2,688 CLBs | 2,688 CLBs | 2,688 CLBs | 2,688 CLBs | 2,688 CLBs | 2,688 CLBs |
| I/O Sites | 448 I/O | 448 I/O | 448 I/O | 448 I/O | 448 I/O | 448 I/O |
| Speed Grade | -11 | -11 | -10 | -11 | -11 | -11 |
| Process Technology | CMOS | CMOS | CMOS | CMOS | CMOS | CMOS |
主な差別化要因
- Higher speed grade than the -10 option (vs XC4VLX25-10FFG668C)
- Industrial-temperature family path (vs XC4VLX25-11FFG668I)
- Same-device, same-package migration path (vs XC4VLX25-11FFG668CS2)
設計ノート
Use the AMD Virtex-4 package pinout files for XC4VLX25-11FFG668C when creating the 668-ball footprint and escape routing. The package has a 1.00 mm ball pitch, so confirm pad geometry, solder-mask definition, and assembly capability with the package drawing. Match the PCB netlist to the exact ordering code because FF, FFG, C, I, and S2 suffixes affect procurement and operating conditions.
Plan the core and I/O supplies as separate distribution networks with local high-frequency decoupling at each supply ball. Route power and ground planes to minimize impedance between the package and its bypass components, while avoiding splits beneath the device. Obtain the required voltage values, tolerance, sequencing, and current limits from the family documentation before finalizing the power tree.
Give clock inputs and high-speed I/O clean reference planes, short return paths, and controlled impedance. Account for package-ball effects and board skew during timing analysis rather than relying only on the device's maximum clock frequency. Validate source-synchronous interfaces and external memory connections with post-route timing and signal-integrity simulations after the final PCB stack-up is selected.
Treat the 668-ball FCBGA as a substantial thermal design item. Place thermal-via arrays beneath the device according to the package thermal guidance and provide uninterrupted copper on supply and ground planes. Calculate worst-case junction temperature from actual board copper, airflow, and power dissipation, then verify the operating range for the selected temperature-grade suffix.
Do not assume that any FPGA with 668 balls is interchangeable. A valid replacement must retain the XC4VLX25 device, 668-ball footprint, compatible configuration, adequate speed grade, and required temperature range. When changing XC4VLX25-11FFG668C to another family, plan for bitstream incompatibility, tool migration, design recompilation, and potentially a complete PCB redesign.
コンプライアンス情報
The manufacturer listing identifies XC4VLX25-11FFG668C as Pb-free. Separate RoHS, REACH, halogen-free, conflict-minerals, and aerospace qualification statements require current manufacturer documentation.