XC4VLX60-11FFG668I - 59,904-Cell FPGA | AMD Xilinx
MPN: XC4VLX60-11FFG668I ✗ پایان تولیدXC4VLX60-11FFG668I نمای کلی
A field-programmable gate array is a semiconductor whose digital logic, memory, and interconnect resources are configured after manufacture. The Virtex-4 LX belongs to the FPGA hierarchy, which sits above configurable logic blocks and below broader programmable-logic systems. Unlike a fixed-function application-specific integrated circuit, an FPGA can be reprogrammed for protocol bridging, signal processing, control, or hardware acceleration without changing the physical PCB.
The XC4VLX60-11FFG668I provides 59,904 logic cells organized into 6,656 logic blocks and 26,624 Adaptive Logic Modules. Its 448 dedicated I/O positions support interface-heavy designs, while 2.81 Mbit of embedded block RAM provides on-chip storage for packet buffers, data acquisition, and local processing. The -11 speed grade supports a listed maximum clock frequency of 1205 MHz.
The device is manufactured using 90 nm CMOS technology and operates from a 1.2 V nominal core supply, with a listed range of 1.14 V to 1.26 V. The -11 designation identifies the performance grade, while the FFG package suffix identifies the 668-ball surface-mount package. Its 668-ball construction supports dense routing and substantial programmable I/O compared with leaded packages.
Typical applications include industrial control, telecommunications infrastructure, instrumentation, embedded video processing, network packet handling, and FPGA-based accelerator subsystems. The combination of 448 I/O and 2.81 Mbit of block RAM is especially useful when several independent data paths must operate concurrently without relying on external memory.
PCB implementation requires careful power-plane design, decoupling, thermal management, and pin-aware BGA escape routing. Use the AMD package pinout file to assign every ball and the manufacturer datasheet to confirm voltage, decoupling, and configuration requirements before fabrication. The large BGA also demands inspection methods capable of detecting solder-joint defects.
This page combines the exact device identity, package and electrical characteristics, qualified replacement options, comparison parameters, and implementation guidance for engineers evaluating the XC4VLX60-11FFG668I in new or legacy Virtex-4 systems.
جایگزینهای drop-in برای XC4VLX60-11FFG668I — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای XC4VLX60-11FFG668I (همان فرمفاکتور و فوتپرینت) — متفاوت در Device Type, Package, Temperature Grade, Logic Cells, Mounting Type.
XC4VLX60-10FFG668I
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←XC4VLX60-12FFG668I
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
XC4VLX60-11FF668C
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←XC4VLX60-11FFG668C
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشدهبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←XC4VLX60-11FF668I
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←XC4VLX60-11FFG668I حداکثر مقادیر مجاز و مشخصات الکتریکی
| Device Type | Virtex-4 LX field-programmable gate array |
| Logic Cells | 59,904 cells |
| Logic Blocks | 6,656 blocks |
| Adaptive Logic Modules | 26,624 ALMs |
| Embedded Memory | 2.81 Mbit |
| User I/O | 448 I/O |
| Inputs | 448 inputs |
| Outputs | 448 outputs |
| حداکثر فرکانس کلاک | 1205 MHz |
| Internal Frequency | 1028 MHz |
| Process Technology | 90 nm CMOS |
| Logic Family | CMOS |
| Nominal Supply Voltage | 1.2 V |
| Supply Voltage Range | 1.14 V to 1.26 V |
| Speed Grade | -11 |
| بستهبندی | 668-ball FBGA, 27 x 27 mm |
| Terminal Type | 668 balls |
| نوع نصب | Surface mount |
| Lead-Free Status | Pb-free |
راهنمای پیکربندی پین XC4VLX60-11FFG668I 668-ball fbga, 27 x 27 mm
پیکربندی پین برای XC4VLX60-11FFG668I (پکیج 668-ball fbga, 27 x 27 mm). این IC دیجیتال شامل GPIO، رابطهای ارتباطی (UART، SPI، I2C) و پینهای تغذیه است. برای عملکردهای جایگزین پین و گزینههای پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستمهای نهفته و چیدمان PCB.
داده پینآوت تفصیلی موجود نیست برای XC4VLX60-11FFG668I.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
XC4VLX60-11FFG668I مناسب است برای 6 کاربردs: Industrial Control and Automation, Telecommunications Packet Processing, Data Acquisition and Instrumentation, Embedded Video Processing, Hardware Accelerator Subsystems, Aerospace and Defense Test Equipment.
Industrial Control and Automation
The XC4VLX60-11FFG668I is well suited to industrial controllers that coordinate many sensors, actuators, and communication channels in parallel. Its 59,904 logic cells can host control logic, state machines, motion sequencing, and diagnostic routines, while 448 I/O provide substantial interface capacity for field-bus and digital equipment. The 2.81 Mbit of embedded memory can support local buffers and timing-critical data handling. Because the FPGA is a mature programmable platform, industrial designs can preserve deterministic behavior while adding or revising functions through configuration updates during qualification and maintenance.
پیشنهادی
Telecommunications Packet Processing
The XC4VLX60-11FFG668I can implement parallel packet classification, buffering, framing, and traffic-management functions because its 59,904 logic cells support multiple independent datapaths. The 448 I/O positions allow multiple external interfaces, and 2.81 Mbit of embedded block RAM can hold packet headers, counters, or scheduling data close to the processing logic. Its listed 1205 MHz maximum clock and -11 speed grade provide useful timing margin for clocked pipeline designs, although timing closure, I/O standards, and line-rate interfaces must be validated together for each telecommunications platform.
پیشنهادی
Data Acquisition and Instrumentation
The XC4VLX60-11FFG668I supports high-channel-count data-acquisition systems by combining 448 I/O with programmable logic for sampling control, triggering, filtering, and digital signal conditioning. On-chip block RAM can implement local FIFO structures, waveform windows, or intermediate processing stages, reducing traffic to external memory during each acquisition burst. The device's large logic budget also permits redundant processing paths and calibration logic to coexist. For precision measurement equipment, designers should select the appropriate external I/O standards and validate edge timing at the selected -11 speed grade.
پیشنهادی
Embedded Video Processing
The XC4VLX60-11FFG668I can accommodate parallel pixel pipelines, frame buffers, color conversion, and interface control for embedded video systems. Its 2.81 Mbit of embedded memory is useful for line buffers and short frame-processing stages, while 448 I/O can expose parallel or serial video interfaces through suitable board-level transceivers. The 59,904 logic cells allow several processing stages to operate concurrently instead of time-multiplexing a smaller FPGA. A practical design should account for external memory bandwidth, clock-domain crossings, and the electrical requirements of the selected video interface.
پیشنهادی
Hardware Accelerator Subsystems
The XC4VLX60-11FFG668I is useful for legacy hardware-acceleration systems requiring concurrent fixed datapaths, control logic, and local buffering. Designers can map filters, cryptographic pipelines, or protocol accelerators into its 26,624 Adaptive Logic Modules and use 2.81 Mbit of block RAM for working sets and stream buffers. The -11 grade provides higher timing margin than -10 for demanding synchronous pipelines, but the 90 nm process should be considered when comparing power, clock rate, and silicon area against newer FPGA families. Migration usually requires a complete synthesis, place-and-route, and timing-signoff effort.
پیشنهادی
Aerospace and Defense Test Equipment
The XC4VLX60-11FFG668I can serve in test, simulation, and ground-support equipment that requires flexible logic, extensive I/O, and reconfigurable test sequences. Its 59,904 logic cells can host protocol engines, stimulus generators, data checks, and supervisory control, while 2.81 Mbit of embedded memory supports deterministic test buffers. The large 668-ball package provides routing flexibility for multichannel interfaces, but deployed equipment must use an assembly whose environmental qualification and configuration-control requirements are formally documented. Programming files, bitstream integrity, and lifecycle traceability should be managed as controlled configuration items.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای XC4VLX60-11FFG668I — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | XC4VLX60-10FFG668I | XC4VLX60-12FFG668I | XC4VLX60-11FF668C | XC4VLX60-11FFG668C | XC4VLX60-11FF668I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 668-ball FBGA (FFG) | 668-ball FBGA (FFG) | 668-ball FBGA (FFG) | 668-ball FBGA (FF) | 668-ball FBGA (FFG) | 668-ball FBGA (FF) |
| FPGA Family | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX |
| Speed Grade | -11 | -10 | -12 | -11 | -11 | -11 |
| Logic Cells | 59,904 cells | 59,904 cells | 59,904 cells | 59,904 cells | 59,904 cells | 59,904 cells |
| Logic Blocks | 6,656 blocks | 6,656 blocks | 6,656 blocks | 6,656 blocks | 6,656 blocks | 6,656 blocks |
| Adaptive Logic Modules | 26,624 ALMs | 26,624 ALMs | 26,624 ALMs | 26,624 ALMs | 26,624 ALMs | 26,624 ALMs |
| User I/O | 448 I/O | 448 I/O | 448 I/O | 448 I/O | 448 I/O | 448 I/O |
| Embedded Memory | 2.81 Mbit | 2.81 Mbit | 2.81 Mbit | 2.81 Mbit | 2.81 Mbit | 2.81 Mbit |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
| Nominal Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
تفاوتهای کلیدی
- Higher speed grade within the same device family (در مقابلXC4VLX60-10FFG668I)
- Direct package reuse for legacy board revisions (در مقابلXC4VLX60-11FF668C)
- Substantial deterministic parallel-processing capacity (در مقابلXC4VLX60-10FFG668I)
یادداشتهای طراحی
Implement the 668-ball footprint using the official AMD Virtex-4 package data and a production-tested BGA library for the exact FFG package. Confirm pad diameter, solder-mask opening, paste stencil, and copper-pad definitions against the package drawing rather than copying a generic 668-ball footprint. Because every ball can carry a power, configuration, clock, or user-I/O function, a single mapping error can prevent configuration or violate the power plane. Run an independent PCB-versus-CAD netlist comparison and inspect assembled boards with X-ray because solder joints are hidden beneath the package.
Use the manufacturer reference design to partition the 1.14 V to 1.26 V core-supply requirement, configuration rails, and I/O supplies. Place local bulk and high-frequency decoupling at the associated device power balls with short, low-inductance paths; avoid relying on distant plane connections to provide effective bypassing. Confirm regulator stability, startup sequencing, and power-consumption limits for the selected design. The 90 nm FPGA architecture does not eliminate thermal and delivery constraints, so validate the complete power tree at production temperature before releasing the PCB.
Route clocks, configuration signals, and high-speed I/O with controlled impedance and continuous reference planes, following the AMD board-design guidance for the selected I/O standard. Account for BGA breakout length, via stubs, package parasitics, and the electrical loading of external memory or transceivers. Differential and source-synchronous interfaces require matched routing and length compensation appropriate to the implemented standard. Perform post-route signal-integrity simulation with actual connector, package, and PCB models rather than relying only on placement and routing rule checks.
Do not treat a speed-grade substitution as a transparent production change. Moving from XC4VLX60-11FFG668I to the -10 grade reduces timing margin and requires a new timing-signoff run, while moving to -12 may change power behavior. Likewise, changing the ordering suffix can alter temperature, lifecycle, or lead-free conditions. Preserve the complete MPN in the approved BOM, lock programming files and bitstream hashes, and document any timing rerun, qualification result, and configuration compatibility review.
اطلاعات انطباق
The Mouser product listing identifies the XC4VLX60-11FFG668I as Pb-free. RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals declarations were not stated for the exact MPN.