XC7A75T-2FGG484C - 75K Logic Cell Artix-7 FPGA | AMD
部品番号: XC7A75T-2FGG484C ✓ 生産中XC7A75T-2FGG484C 概要
An FPGA is a semiconductor whose digital logic, interconnect, memory, and input/output resources are configured after manufacture. Within the product hierarchy, the XC7A75T-2FGG484C is an Artix-7 FPGA, a field-programmable gate array, and a programmable logic device within the broader semiconductor and embedded-processing categories. Its architecture is suited to parallel data acquisition, protocol conversion, real-time control, video processing, sensor fusion, and high-performance interface bridging.
The -2 suffix identifies the performance-grade variant, while FGG484 identifies the 484-ball package. The commercial-temperature C suffix corresponds to the listed 0 °C to 85 °C operating range. A 0.95 V to 1.05 V core-voltage range supports contemporary low-voltage digital designs, while the 285 input and 285 output resources provide substantial connectivity. The stated 1286 MHz maximum clock frequency enables demanding sequential and parallel processing when the design, I/O, power, and timing constraints are satisfied.
Technical implementation requires careful attention to high-speed board layout, clean power delivery, decoupling, clock integrity, and thermal performance. Because the device uses a large 484-ball FBGA, PCB escape routing and via-in-pad construction can materially affect manufacturability. Configuration storage, bank-specific supply requirements, and the package ball map must be reviewed against the AMD Artix-7 documentation before schematic capture or footprint release.
Typical applications include industrial automation and PLC-style control, motor-control and sensor-fusion systems, image-processing pipelines, high-throughput interface bridges, embedded communications equipment, and compact test-and-measurement instruments. The Artix-7 balance of logic capacity, DSP capability, I/O availability, and power efficiency is useful when designers need FPGA performance without moving to a larger device family.
When designing a new board, keep the FPGA core, configuration interface, memory, transceivers where used, and power rails aligned with the AMD package-pinout and design-assistance guidance. Place bypass capacitors close to supply balls, provide controlled clock distribution, and route high-speed interfaces with continuous reference planes. Migration among Artix-7 FGG484 devices requires checking ball assignments and unused pins rather than relying only on package similarity.
This product record combines package, logic-density, temperature, voltage, interface, and clock information with migration guidance and practical design considerations. It also distinguishes true FGG484 migration candidates from alternatives that require a different package or redesign, helping engineers evaluate replacement options before committing a PCB footprint.
ドロップイン代替品: XC7A75T-2FGG484C — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: XC7A75T-2FGG484C (同一形状・フットプリント) — 相違点: Package, Logic Cells, Mounting Type, Device Type, Speed Grade.
XC7A75T-2FGG484I
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC7A75T-1FGG484C
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC7A75T-3FGG484E
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC7A50T-2FGG484C
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC7A100T-2FGG484C
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XC7A75T-2FGG484C 最大定格&電気的特性
| Device Type | Artix-7 field-programmable gate array (FPGA) |
| Logic Cells | 75,520 cells |
| Manufacturing Technology | 28 nm CMOS |
| Core Supply Voltage | 1 V |
| Core Voltage Range | 0.95 V to 1.05 V |
| 最大クロック周波数 | 1286 MHz |
| Input Count | 285 inputs |
| Output Count | 285 outputs |
| パッケージ | 484-pin FBGA (FGG484) |
| Package Dimensions | 23 mm × 23 mm |
| Terminal Count | 484 terminals |
| Minimum Operating Temperature | 0 °C |
| Maximum Operating Temperature | 85 °C |
| Speed Grade | -2 |
| Temperature Grade Suffix | C |
| 実装タイプ | Surface-mount ball grid array |
XC7A75T-2FGG484C 23 mm × 23 mm ピン配置ガイド
XC7A75T-2FGG484C (23 mm × 23 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: XC7A75T-2FGG484C.
詳細は データシート をご参照ください。
主な用途
XC7A75T-2FGG484C の用途: 6 件s: Industrial Automation and PLC Control, Real-Time Sensor Fusion, Image and Video Processing, Motor Control and Power Conversion, Embedded Communications and Protocol Bridging, Test and Measurement Instrumentation.
Industrial Automation and PLC Control
The XC7A75T-2FGG484C fits industrial automation systems that combine deterministic control logic with multiple communication and sensor interfaces. Its 75,520 logic cells provide parallel capacity for sequencing, state machines, counters, and protocol conversion, while 285 inputs and 285 outputs support broader board connectivity than a small microcontroller. The 1286 MHz maximum clock frequency allows demanding control paths to close timing with careful floorplanning. The commercial 0 °C to 85 °C range suits enclosed equipment whose measured internal temperature stays within that interval; harsher environments should use the industrial-grade XC7A75T-2FGG484I and separately validate surge, isolation, and EMC requirements.
おすすめ
Real-Time Sensor Fusion
The XC7A75T-2FGG484C is suitable for sensor-fusion systems that combine radar, camera, position, or environmental sensor streams in parallel. The 75,520 logic cells can support filtering, calibration, feature extraction, and data alignment concurrently, and the 1286 MHz maximum clock frequency supports high-speed digital pipelines. Its 285 input and 285 output resources simplify parallel sensor and memory connectivity compared with lower-density programmable logic. Designers should use synchronous interfaces where practical, register boundary-crossing paths, and allocate logic resources carefully to avoid congestion around high-utilization routing channels. The 0.95 V to 1.05 V core range must be translated into a clean, low-noise power architecture.
おすすめ
Image and Video Processing
The XC7A75T-2FGG484C can implement parallel image-processing functions such as filtering, color conversion, thresholding, and pixel-domain feature extraction. Its 75,520 logic cells provide a middle ground between small fixed-function devices and much larger FPGAs, while the 1286 MHz maximum clock frequency supports pipelined datapaths when timing closure is managed. The 285 I/O resources are useful for connecting image sensors, frame buffers, and display interfaces. Engineers should preserve video timing through registered pipelines and account for the bandwidth of external memory through bank-specific pin constraints. Because FGG484 is a demanding BGA package, via-in-pad construction, layer transitions, and power delivery can influence both manufacturability and high-speed signal integrity.
おすすめ
Motor Control and Power Conversion
The XC7A75T-2FGG484C supports digital motor-control, power-conversion, and real-time monitoring functions that benefit from parallel execution. Its programmable logic can implement PWM generation, current sampling, fault handling, control-law evaluation, and communication tasks concurrently, while the 1286 MHz maximum clock frequency supports tightly timed control loops. The 285 I/O resources allow dedicated connections to gate drivers, position sensors, current amplifiers, and supervisory logic. The device should be paired with power-semiconductor isolation and gate-drive circuitry rather than directly driving hazardous loads. Layout must separate sensitive analog sampling paths from switching nodes, and the commercial temperature requirement should be checked against the enclosure's worst-case internal temperature.
おすすめ
Embedded Communications and Protocol Bridging
The XC7A75T-2FGG484C is appropriate for embedded protocol bridges, interface converters, and data-routing systems that need programmable logic alongside serial or parallel communications. Its 75,520 cells support multiple channels, packet processing, CRC generation, buffering, and test logic, while 285 inputs and 285 outputs support external transceivers and memories. The 1286 MHz maximum clock frequency enables high-rate serialization and deserialization functions when timing constraints permit. Engineers should map each interface to a suitable I/O bank, verify voltage compatibility with external devices, and use source-synchronous routing rules for high-speed links. Because many communications systems require uninterrupted operation, consider configuration watchdog or recovery logic and validate bitstream storage according to the AMD programming architecture.
おすすめ
Test and Measurement Instrumentation
The XC7A75T-2FGG484C can implement flexible acquisition, pattern generation, digital signal processing, and analysis logic in compact instrumentation. Its 75,520 logic cells allow parallel channels and substantial test sequencing, while 285 inputs and 285 outputs support external converters, memory, and trigger interfaces. The 1286 MHz maximum clock frequency supports demanding real-time analysis, subject to the selected clocking resources and timing closure. Instrument designs should isolate analog front ends from digital activity, use controlled clocking and triggering, and account for deterministic startup behavior. The 23 mm × 23 mm FGG484 package helps reduce board area but requires careful escape routing, multilayer construction, and thermal analysis for sustained high-utilization operation.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: XC7A75T-2FGG484C — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | XC7A75T-2FGG484I | XC7A75T-1FGG484C | XC7A75T-3FGG484E | XC7A50T-2FGG484C | XC7A100T-2FGG484C |
|---|---|---|---|---|---|---|
| Package | FBGA-484 (FGG484) | FBGA-484 (FGG484) - same | FBGA-484 (FGG484) - same | FBGA-484 (FGG484) - same | FBGA-484 (FGG484) - same | FBGA-484 (FGG484) - same |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Device Family | Artix-7 FPGA | Artix-7 FPGA | Artix-7 FPGA | Artix-7 FPGA | Artix-7 FPGA | Artix-7 FPGA |
| Speed Grade | -2 | -2 | -1 | -3 | -2 | -2 |
| Manufacturing Technology | 28 nm CMOS | 28 nm CMOS | 28 nm CMOS | 28 nm CMOS | 28 nm CMOS | 28 nm CMOS |
| Package Dimensions | 23 mm × 23 mm | 23 mm × 23 mm | 23 mm × 23 mm | 23 mm × 23 mm | 23 mm × 23 mm | 23 mm × 23 mm |
主な差別化要因
- Higher logic capacity than the lower-density Artix-7 option (vs XC7A50T-2FGG484C)
- Commercial-temperature version preserves lower-cost environment targeting (vs XC7A75T-2FGG484I)
- Balanced logic density and speed grade for FGG484 designs (vs XC7A100T-2FGG484C)
- Faster speed grade than the -1 option (vs XC7A75T-1FGG484C)
設計ノート
The XC7A75T-2FGG484C operates from a 0.95 V to 1.05 V core supply, but the complete design must also satisfy configuration and I/O-bank voltage requirements. Place the required high-frequency bypass capacitors directly beside their corresponding power balls, keep the power-and-ground-plane return path continuous, and use separate filtering for noisy external interfaces. Review the device data sheet for bank-voltage limits, sequencing, and external-transceiver supply requirements before finalizing the power tree.
FGG484 is a 23 mm × 23 mm ball-grid-array package, so escape routing and assembly yield require deliberate planning. Match the land pattern to AMD's FGG484 package drawing, define vias under balls only when the package and board construction support via-in-pad, and avoid placing test points or tall components where they interfere with the package outline. Account for component placement tolerances, solder-mask definitions, and assembly-handling requirements during stack-up selection.
Use continuous reference planes for high-speed interfaces and route clocks as short, controlled paths away from switching nodes and noisy inputs. The 285 input and 285 output resources should be assigned according to bank-voltage limits and clock-capable pin restrictions from the package-pinout files. For source-synchronous interfaces, follow AMD's recommended spacing and via guidance, and validate eye closure, crosstalk, and power-plane resonances through post-layout simulation or measurement.
Do not assume that every Artix-7 device in FGG484 is an unconditional drop-in replacement. AMD migration guidance notes that different density tiers can add power, ground, or no-connect balls, and speed or temperature suffixes can change operating limits. Compare the full ball map, configuration interface, supply requirements, exposed-pad connections, and timing grade before substituting XC7A50T-2FGG484C or XC7A100T-2FGG484C for the XC7A75T-2FGG484C.
Sustained high-utilization operation can produce substantially more heat than a lightly loaded configuration. Route heat through the package substrate into an uninterrupted ground plane and provide copper on both sides where the mechanical design permits. Estimate total dissipation from the selected resource utilization, then verify the design against the maximum operating temperature of 85 °C. Keep thermal modeling results separate from datasheet limits so that actual board-level airflow, enclosure temperature, and local copper geometry are included.
コンプライアンス情報
No explicit compliance declarations were identified for the exact MPN. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals status against the current manufacturer product documentation before procurement.