AMD

XC7A75T-2FGG484C - 75K Logic Cell Artix-7 FPGA | AMD

N.º da peça: XC7A75T-2FGG484C ✓ Ativo
1 V Vdss 484-pin FBGA (FGG484) Package 1286 MHz Speed
MOQ: 1 |

XC7A75T-2FGG484C Visão geral

AMD Xilinx XC7A75T-2FGG484C is an Artix-7 field-programmable gate array with 75,520 logic cells, 28 nm CMOS technology, and a 1 V core supply in a 484-pin FBGA package. The device provides 285 inputs, 285 outputs, and a maximum clock frequency of 1286 MHz. Its 23 mm × 23 mm FGG484 package combines substantial programmable logic density with extensive I/O connectivity for cost-sensitive embedded, control, signal-processing, and communications designs.

An FPGA is a semiconductor whose digital logic, interconnect, memory, and input/output resources are configured after manufacture. Within the product hierarchy, the XC7A75T-2FGG484C is an Artix-7 FPGA, a field-programmable gate array, and a programmable logic device within the broader semiconductor and embedded-processing categories. Its architecture is suited to parallel data acquisition, protocol conversion, real-time control, video processing, sensor fusion, and high-performance interface bridging.

The -2 suffix identifies the performance-grade variant, while FGG484 identifies the 484-ball package. The commercial-temperature C suffix corresponds to the listed 0 °C to 85 °C operating range. A 0.95 V to 1.05 V core-voltage range supports contemporary low-voltage digital designs, while the 285 input and 285 output resources provide substantial connectivity. The stated 1286 MHz maximum clock frequency enables demanding sequential and parallel processing when the design, I/O, power, and timing constraints are satisfied.

Technical implementation requires careful attention to high-speed board layout, clean power delivery, decoupling, clock integrity, and thermal performance. Because the device uses a large 484-ball FBGA, PCB escape routing and via-in-pad construction can materially affect manufacturability. Configuration storage, bank-specific supply requirements, and the package ball map must be reviewed against the AMD Artix-7 documentation before schematic capture or footprint release.

Typical applications include industrial automation and PLC-style control, motor-control and sensor-fusion systems, image-processing pipelines, high-throughput interface bridges, embedded communications equipment, and compact test-and-measurement instruments. The Artix-7 balance of logic capacity, DSP capability, I/O availability, and power efficiency is useful when designers need FPGA performance without moving to a larger device family.

When designing a new board, keep the FPGA core, configuration interface, memory, transceivers where used, and power rails aligned with the AMD package-pinout and design-assistance guidance. Place bypass capacitors close to supply balls, provide controlled clock distribution, and route high-speed interfaces with continuous reference planes. Migration among Artix-7 FGG484 devices requires checking ball assignments and unused pins rather than relying only on package similarity.

This product record combines package, logic-density, temperature, voltage, interface, and clock information with migration guidance and practical design considerations. It also distinguishes true FGG484 migration candidates from alternatives that require a different package or redesign, helping engineers evaluate replacement options before committing a PCB footprint.

Alternativas drop-in para XC7A75T-2FGG484C — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com XC7A75T-2FGG484C (mesmo formato e footprint) — diferindo em Package, Logic Cells, Mounting Type, Device Type, Speed Grade.

AMD
Package: 484-pin FGG484 flip-chip BGA
Mounting Type: Surface mount
Device Type: Artix-7 Field Programmable Gate Array (FPGA)
Comparar com XC7A75T-2FGG484C →
AMD
Mounting Type: Surface Mount
Device Type: Artix-7 Field Programmable Gate Array (FPGA)
Comparar com XC7A75T-2FGG484C →
AMD
Package: 484-ball FBGA (FGG484)
Logic Cells: 75520
Mounting Type: Surface Mount (BGA)
Comparar com XC7A75T-2FGG484C →
AMD
Package: 484-FBGA (FGG484), 17 mm x 17 mm, 0.8 mm pitch
Logic Cells: 75,520
Mounting Type: Surface Mount
Comparar com XC7A75T-2FGG484C →

XC7A75T-2FGG484I

✅ Drop-In
AMD
📦 FBGA-484 (FGG484)
Artix-7 · 75520 · 285 · 3870720 bits · 484-ball FBGA (FGG484) · 28nm CMOS · 1 V · -2

Consulte o preço

Ver ficha técnica →

XC7A75T-1FGG484C

✅ Drop-In
AMD
📦 FBGA-484 (FGG484)
Artix-7 Field Programmable Gate Array (FPGA) · 75,520 cells · 285 I/O · 8 transceivers · 180 slices · 28 nm CMOS · 1 V · -1

Consulte o preço

Ver ficha técnica →

XC7A75T-3FGG484E

✅ Drop-In
AMD
📦 FBGA-484 (FGG484)
Field Programmable Gate Array (FPGA), SRAM-based · Artix-7 · 75,520 · 285 · 628 MHz · -3 (performance grade) · 484-FBGA (FGG484), 17 mm x 17 mm, 0.8 mm pitch · Surface Mount

Consulte o preço

Ver ficha técnica →

XC7A50T-2FGG484C

✅ Drop-In
AMD
📦 FBGA-484 (FGG484)
Artix-7 field-programmable gate array (FPGA) · 52,160 cells · 276,480 flip-flops · 250 I/O · Artix-7 · -2 · Commercial (C) · FGG484 484-ball BGA

Consulte o preço

Ver ficha técnica →

XC7A100T-2FGG484C

✅ Drop-In
📦 FBGA-484 (FGG484)
Same -2 speed grade and FGG484 package; logic capacity is higher, with additional package balls requiring migration and unused-pin review.

📋 Alternativa de referência (fora do catálogo)

XC7A75T-2FGG484C Classificações máximas e características elétricas

Device Type Artix-7 field-programmable gate array (FPGA)
Logic Cells 75,520 cells
Manufacturing Technology 28 nm CMOS
Core Supply Voltage 1 V
Core Voltage Range 0.95 V to 1.05 V
Frequência máxima de clock 1286 MHz
Input Count 285 inputs
Output Count 285 outputs
Encapsulamento 484-pin FBGA (FGG484)
Package Dimensions 23 mm × 23 mm
Terminal Count 484 terminals
Minimum Operating Temperature 0 °C
Maximum Operating Temperature 85 °C
Speed Grade -2
Temperature Grade Suffix C
Tipo de montagem Surface-mount ball grid array

Guia de Configuração de Pinos do XC7A75T-2FGG484C 23 mm × 23 mm

Configuração de pinos para XC7A75T-2FGG484C (pacote 23 mm × 23 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.

Diagrama de pinagem do pacote 23 mm × 23 mm para XC7A75T-2FGG484C

Nenhum dado detalhado de pinagem disponível para XC7A75T-2FGG484C.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

XC7A75T-2FGG484C é adequado para 6 aplicaçãos: Industrial Automation and PLC Control, Real-Time Sensor Fusion, Image and Video Processing, Motor Control and Power Conversion, Embedded Communications and Protocol Bridging, Test and Measurement Instrumentation.

🏭

Industrial Automation and PLC Control

The XC7A75T-2FGG484C fits industrial automation systems that combine deterministic control logic with multiple communication and sensor interfaces. Its 75,520 logic cells provide parallel capacity for sequencing, state machines, counters, and protocol conversion, while 285 inputs and 285 outputs support broader board connectivity than a small microcontroller. The 1286 MHz maximum clock frequency allows demanding control paths to close timing with careful floorplanning. The commercial 0 °C to 85 °C range suits enclosed equipment whose measured internal temperature stays within that interval; harsher environments should use the industrial-grade XC7A75T-2FGG484I and separately validate surge, isolation, and EMC requirements.

🧩

Real-Time Sensor Fusion

The XC7A75T-2FGG484C is suitable for sensor-fusion systems that combine radar, camera, position, or environmental sensor streams in parallel. The 75,520 logic cells can support filtering, calibration, feature extraction, and data alignment concurrently, and the 1286 MHz maximum clock frequency supports high-speed digital pipelines. Its 285 input and 285 output resources simplify parallel sensor and memory connectivity compared with lower-density programmable logic. Designers should use synchronous interfaces where practical, register boundary-crossing paths, and allocate logic resources carefully to avoid congestion around high-utilization routing channels. The 0.95 V to 1.05 V core range must be translated into a clean, low-noise power architecture.

📺

Image and Video Processing

The XC7A75T-2FGG484C can implement parallel image-processing functions such as filtering, color conversion, thresholding, and pixel-domain feature extraction. Its 75,520 logic cells provide a middle ground between small fixed-function devices and much larger FPGAs, while the 1286 MHz maximum clock frequency supports pipelined datapaths when timing closure is managed. The 285 I/O resources are useful for connecting image sensors, frame buffers, and display interfaces. Engineers should preserve video timing through registered pipelines and account for the bandwidth of external memory through bank-specific pin constraints. Because FGG484 is a demanding BGA package, via-in-pad construction, layer transitions, and power delivery can influence both manufacturability and high-speed signal integrity.

⚡

Motor Control and Power Conversion

The XC7A75T-2FGG484C supports digital motor-control, power-conversion, and real-time monitoring functions that benefit from parallel execution. Its programmable logic can implement PWM generation, current sampling, fault handling, control-law evaluation, and communication tasks concurrently, while the 1286 MHz maximum clock frequency supports tightly timed control loops. The 285 I/O resources allow dedicated connections to gate drivers, position sensors, current amplifiers, and supervisory logic. The device should be paired with power-semiconductor isolation and gate-drive circuitry rather than directly driving hazardous loads. Layout must separate sensitive analog sampling paths from switching nodes, and the commercial temperature requirement should be checked against the enclosure's worst-case internal temperature.

🌐

Embedded Communications and Protocol Bridging

The XC7A75T-2FGG484C is appropriate for embedded protocol bridges, interface converters, and data-routing systems that need programmable logic alongside serial or parallel communications. Its 75,520 cells support multiple channels, packet processing, CRC generation, buffering, and test logic, while 285 inputs and 285 outputs support external transceivers and memories. The 1286 MHz maximum clock frequency enables high-rate serialization and deserialization functions when timing constraints permit. Engineers should map each interface to a suitable I/O bank, verify voltage compatibility with external devices, and use source-synchronous routing rules for high-speed links. Because many communications systems require uninterrupted operation, consider configuration watchdog or recovery logic and validate bitstream storage according to the AMD programming architecture.

🖥️

Test and Measurement Instrumentation

The XC7A75T-2FGG484C can implement flexible acquisition, pattern generation, digital signal processing, and analysis logic in compact instrumentation. Its 75,520 logic cells allow parallel channels and substantial test sequencing, while 285 inputs and 285 outputs support external converters, memory, and trigger interfaces. The 1286 MHz maximum clock frequency supports demanding real-time analysis, subject to the selected clocking resources and timing closure. Instrument designs should isolate analog front ends from digital activity, use controlled clocking and triggering, and account for deterministic startup behavior. The 23 mm × 23 mm FGG484 package helps reduce board area but requires careful escape routing, multilayer construction, and thermal analysis for sustained high-utilization operation.

What is the XC7A75T-2FGG484C?
The XC7A75T-2FGG484C is an AMD Artix-7 FPGA with 75,520 logic cells, 285 inputs, 285 outputs, and a maximum clock frequency of 1286 MHz. It is manufactured on 28 nm CMOS technology, operates from a 0.95 V to 1.05 V core supply, and uses a 23 mm × 23 mm 484-pin FBGA package. The AMD Artix-7 documentation identifies the device as a programmable-logic platform for cost-sensitive, power-efficient embedded systems.
Where can I download the XC7A75T-2FGG484C datasheet?
The XC7A75T-2FGG484C documentation is available through AMD's official Artix-7 package-pinout resources and the 7 Series Packaging and Pinout Product Specification, UG475. The manufacturer resource provides the package files and guidance needed to interpret the FGG484 ball map. Use the device-specific Artix-7 data sheet for electrical limits, switching characteristics, configuration information, and operating-condition details before releasing the power and pin assignments.
Where can I find the XC7A75T-2FGG484C pinout and package files?
The XC7A75T-2FGG484C pinout is published in AMD's Artix-7 package-device pinout files and documented in UG475. Those manufacturer resources include package information in ASCII and CSV formats, while UG475 explains package definitions, I/O banks, power and ground placement, memory groupings, and pinout conventions. Use the FGG484 package files when creating the schematic symbol, PCB footprint, and ball-assignment report.
What are the key specifications of XC7A75T-2FGG484C that engineers should know?
The XC7A75T-2FGG484C combines 75,520 logic cells with 285 inputs, 285 outputs, and a maximum clock frequency of 1286 MHz. Its 28 nm CMOS implementation operates from a 0.95 V to 1.05 V core supply and is packaged in a 23 mm × 23 mm, 484-pin FBGA. The listed commercial temperature range is 0 °C to 85 °C. These parameters place the device in the mid-density Artix-7 range.
What is the XC7A75T-2FGG484C operating voltage range?
The XC7A75T-2FGG484C operates over a 0.95 V to 1.05 V core-voltage range, with a nominal core supply of 1 V. Because an FPGA contains multiple supply domains, the core voltage should not be treated as the only power requirement. Consult the device data sheet for bank-specific supply ranges, configuration voltage, and sequencing requirements before designing the power tree.
What is the operating temperature range of XC7A75T-2FGG484C?
The XC7A75T-2FGG484C is specified for a 0 °C to 85 °C operating-temperature range. The C suffix identifies the commercial temperature grade associated with the listing. If the enclosure can exceed 85 °C or operate below freezing, specify the industrial-grade XC7A75T-2FGG484I after checking its complete electrical and environmental requirements.
Can XC7A75T-2FGG484I replace XC7A75T-2FGG484C?
The XC7A75T-2FGG484I can be a pin-compatible migration candidate for an XC7A75T-2FGG484C board because both use the 484-pin FGG484 package and the -2 speed grade. The principal difference is temperature grade: the I variant supports an industrial range of -40 °C to 100 °C, while the C variant is listed for 0 °C to 85 °C. Verify configuration behavior, supply requirements, and all ball assignments before production.
When should I choose XC7A75T-2FGG484C over the -1 speed grade?
Choose the XC7A75T-2FGG484C when the design timing budget benefits from the faster -2 performance grade. Choose XC7A75T-1FGG484C when the lower speed grade is sufficient and may simplify procurement or reduce cost pressure. Both retain the same Artix-7 device family and FGG484 package, but timing margins, power characteristics, and system-clock targets must be checked against the complete device data sheet.
Is XC7A75T-2FGG484C suitable for industrial automation and motor control?
The XC7A75T-2FGG484C is suitable for industrial automation when its 0 °C to 85 °C range covers the intended ambient conditions. Its 75,520 logic cells, 285 I/O resources, and 1286 MHz maximum clock frequency support parallel control, motor-control algorithms, sensor fusion, and industrial communication. For wider environmental margins, consider the XC7A75T-2FGG484I and validate isolation, surge, and EMC requirements separately.
Is XC7A75T-2FGG484C the same as XC7A75T-2FGG484I?
No, the XC7A75T-2FGG484C and XC7A75T-2FGG484I differ in temperature grade. The C version is listed for 0 °C to 85 °C, while the I version supports an industrial range of -40 °C to 100 °C. They share the -2 performance grade and FGG484 package, making the I version a possible board-level migration when electrical and configuration compatibility is confirmed.
What can replace XC7A75T-2FGG484C on the same PCB?
The closest same-footprint candidates are the XC7A75T-1FGG484C, XC7A75T-2FGG484I, XC7A75T-3FGG484E, XC7A50T-2FGG484C, and XC7A100T-2FGG484C. Their suitability depends on speed grade, temperature range, logic capacity, and unused-ball handling. AMD documents FGG484 migration considerations because larger Artix-7 devices can add power, ground, and no-connect balls, so a footprint match alone does not guarantee an unconditional drop-in replacement.
What is the best AMD equivalent for XC7A75T-2FGG484C?
The best AMD equivalent depends on the design constraint: use XC7A75T-2FGG484I for a wider industrial temperature range, XC7A75T-1FGG484C when the lower speed grade is sufficient, or XC7A75T-3FGG484E for the faster -3 grade. The XC7A50T-2FGG484C and XC7A100T-2FGG484C are same-package Artix-7 alternatives with different logic capacities. Each candidate requires timing, power, and ball-map review.
XC7A75T-2FGG484C vs XC7A50T-2FGG484C: which is better for image processing?
The XC7A75T-2FGG484C is the better choice when an image-processing design requires more parallel logic than the XC7A50T-2FGG484C can provide. Both are -2-grade Artix-7 devices in the FGG484 package, but they target different logic capacities, with the XC7A75T providing 75,520 cells. The XC7A50T may be preferable for smaller pipelines where fitting the design without unused resources is more important than maximum capacity.
Where can I buy XC7A75T-2FGG484C and what is its price?
Use the Request a Quote form on this XAIPART page to request the current XC7A75T-2FGG484C price, stock status, lead time, and order quantity. The commercial listing confirms the exact MPN and package, but it does not present a qualifying quantity-break price table for this record. A current quotation is therefore preferable to using an outdated catalog price for procurement or production planning.
What is the lead time for XC7A75T-2FGG484C?
The current lead time for XC7A75T-2FGG484C must be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, package packaging form, manufacturing continuity, and allocation conditions. For a production schedule, provide the annual usage, forecast horizon, approved package orientation, and target delivery date so the commercial response can reflect the actual build plan.

Dados de referência de engenharia para XC7A75T-2FGG484C — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the XC7A75T-2FGG484C when the design fits the 75,520-cell Artix-7 tier, requires the -2 speed grade, and operates within 0 °C to 85 °C. Select the XC7A75T-2FGG484I when the board must cover a wider industrial temperature range while retaining the same performance grade and package. The XC7A75T-1FGG484C is appropriate when -1 timing is sufficient and a lower-cost procurement option is preferred, while the XC7A75T-3FGG484E suits designs needing the faster -3 grade. Consider the XC7A50T-2FGG484C when the design fits comfortably in a smaller logic tier and minimizing unused resources matters. Consider the XC7A100T-2FGG484C when parallel capacity is more valuable than avoiding extra balls and unused resources. In every case, review the FGG484 ball map, configuration method, supply requirements, and timing constraints before treating the candidate as a production replacement.

Comparação com alternativas

Parâmetro Este produto XC7A75T-2FGG484I XC7A75T-1FGG484C XC7A75T-3FGG484E XC7A50T-2FGG484C XC7A100T-2FGG484C
Package FBGA-484 (FGG484) FBGA-484 (FGG484) - same FBGA-484 (FGG484) - same FBGA-484 (FGG484) - same FBGA-484 (FGG484) - same FBGA-484 (FGG484) - same
Brand AMD AMD AMD AMD AMD AMD
Device Family Artix-7 FPGA Artix-7 FPGA Artix-7 FPGA Artix-7 FPGA Artix-7 FPGA Artix-7 FPGA
Speed Grade -2 -2 -1 -3 -2 -2
Manufacturing Technology 28 nm CMOS 28 nm CMOS 28 nm CMOS 28 nm CMOS 28 nm CMOS 28 nm CMOS
Package Dimensions 23 mm × 23 mm 23 mm × 23 mm 23 mm × 23 mm 23 mm × 23 mm 23 mm × 23 mm 23 mm × 23 mm

Principais diferenciais

  • Higher logic capacity than the lower-density Artix-7 option (vs XC7A50T-2FGG484C)
  • Commercial-temperature version preserves lower-cost environment targeting (vs XC7A75T-2FGG484I)
  • Balanced logic density and speed grade for FGG484 designs (vs XC7A100T-2FGG484C)
  • Faster speed grade than the -1 option (vs XC7A75T-1FGG484C)

Notas de projeto

The XC7A75T-2FGG484C operates from a 0.95 V to 1.05 V core supply, but the complete design must also satisfy configuration and I/O-bank voltage requirements. Place the required high-frequency bypass capacitors directly beside their corresponding power balls, keep the power-and-ground-plane return path continuous, and use separate filtering for noisy external interfaces. Review the device data sheet for bank-voltage limits, sequencing, and external-transceiver supply requirements before finalizing the power tree.

FGG484 is a 23 mm × 23 mm ball-grid-array package, so escape routing and assembly yield require deliberate planning. Match the land pattern to AMD's FGG484 package drawing, define vias under balls only when the package and board construction support via-in-pad, and avoid placing test points or tall components where they interfere with the package outline. Account for component placement tolerances, solder-mask definitions, and assembly-handling requirements during stack-up selection.

Use continuous reference planes for high-speed interfaces and route clocks as short, controlled paths away from switching nodes and noisy inputs. The 285 input and 285 output resources should be assigned according to bank-voltage limits and clock-capable pin restrictions from the package-pinout files. For source-synchronous interfaces, follow AMD's recommended spacing and via guidance, and validate eye closure, crosstalk, and power-plane resonances through post-layout simulation or measurement.

Do not assume that every Artix-7 device in FGG484 is an unconditional drop-in replacement. AMD migration guidance notes that different density tiers can add power, ground, or no-connect balls, and speed or temperature suffixes can change operating limits. Compare the full ball map, configuration interface, supply requirements, exposed-pad connections, and timing grade before substituting XC7A50T-2FGG484C or XC7A100T-2FGG484C for the XC7A75T-2FGG484C.

Sustained high-utilization operation can produce substantially more heat than a lightly loaded configuration. Route heat through the package substrate into an uninterrupted ground plane and provide copper on both sides where the mechanical design permits. Estimate total dissipation from the selected resource utilization, then verify the design against the maximum operating temperature of 85 °C. Keep thermal modeling results separate from datasheet limits so that actual board-level airflow, enclosure temperature, and local copper geometry are included.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

No explicit compliance declarations were identified for the exact MPN. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals status against the current manufacturer product documentation before procurement.

Buscas relacionadas

xc7a75t 2fgg484c xc7a75t 2fgg484c datasheet xc7a75t 2fgg484i xc7a75t 1fgg484c xc7a75t fgg484 xc7a75t 3fgg484e xc7a75t 1csg324c xc7a75t 2fgg676c xc7a75t 2ftg256c XC7A75T-2FGG484C pinout XC7A75T-2FGG484C datasheet pdf XC7A75T-2FGG484C equivalent XC7A75T-2FGG484C replacement XC7A75T-2FGG484C price AMD XC7A75T-2FGG484C

Componentes & termos relacionados

AMD AMD Xilinx XC7A75T-2FGG484C XC7A75T-2FGG484I XC7A75T-1FGG484C XC7A75T-3FGG484E XC7A50T-2FGG484C XC7A100T-2FGG484C Artix-7 FPGA field-programmable gate array programmable logic device semiconductor logic cell 28 nm CMOS FBGA-484 FGG484 BGA surface-mount package maximum clock frequency power supply rejection ratio core supply voltage industrial automation sensor fusion image processing UG475 Artix-7 package-device pinout files
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ