AMD

XC7K410T-1FFG676I - 406,720-Cell Kintex-7 FPGA | AMD

部品番号: XC7K410T-1FFG676I ✓ 生産中
0.970 V to 1.03 V Vdss 676-ball FCBGA, FFG676 Package 400 MHz Speed
MOQ: 1 |

XC7K410T-1FFG676I 概要

The AMD XC7K410T-1FFG676I is a Kintex-7 field-programmable gate array with 406,720 logic cells, 28 nm fabrication technology, a 400 I/O configuration, and a 676-ball FCBGA package. It targets demanding systems requiring high programmable logic density, DSP processing, high-speed serial connectivity, and flexible I/O allocation in a single integrated device. The -1 designation identifies the -1 speed grade within the Kintex-7 family, while the FFG676 suffix identifies the 676-ball flip-chip ball-grid-array package and the I suffix identifies the industrial temperature grade.

A Kintex-7 FPGA belongs to the programmable-logic hierarchy: FPGA, programmable logic device, digital semiconductor, and system-level configurable IC. Unlike fixed-function processors or application-specific integrated circuits, an FPGA implements parallel data paths, control logic, serial interfaces, and signal-processing functions in programmable silicon. This makes the device useful where product requirements evolve, where parallel throughput is more important than sequential instruction efficiency, or where a single device can consolidate multiple discrete logic functions.

The XC7K410T provides a logic-cell count of 406,720 and supports up to 400 I/O for this device and package combination. Its 28 nm Kintex-7 architecture is designed to balance performance and power while providing high ratios of DSP resources for communications, industrial imaging, and signal-processing systems. The family supports mainstream connectivity including PCI Express Gen3 and 10 Gigabit Ethernet, enabling high-bandwidth host interfaces and network-facing programmable data paths.

The -1 speed grade is intended for designs that require a predictable performance class without moving to the faster -2 grade. Because FPGA timing closure depends on device speed, utilization, clocking, I/O standards, and routing congestion, an FPGA design should be implemented and timing-analyzed for the exact XC7K410T-1FFG676I device rather than inferred from a generic Kintex-7 family document. The device also contains dedicated resources such as block RAM, DSP blocks, clock-management circuitry, and high-speed transceivers.

Typical uses include high-throughput protocol handling, 10 Gigabit Ethernet interfaces, PCI Express endpoint or bridge designs, industrial control and test systems, high-channel-count data acquisition, and programmable video or communications pipelines. The 400 available I/O allow a system to combine multiple interface standards while retaining programmable logic for protocol termination, packet processing, buffering, and control. Configurable memory and DSP resources can accelerate functions that would otherwise require substantial external logic.

The primary PCB consideration is the 676-ball FCBGA footprint. Designers must follow the AMD package pinout files and UG475 guidance for ball assignment, power-plane construction, decoupling, and high-speed routing. Differential pairs and high-speed transceiver paths require controlled impedance, length matching, and continuous reference planes. Thermal design must also account for the concentration of high-utilization logic and DSP activity in the center of the device.

This page combines device specifications, package details, pricing workflows, same-package migration options, comparison data, and practical implementation guidance. It helps engineers identify whether the -1 speed grade and industrial package configuration fit a new Kintex-7 design before committing to a PCB layout or long-lead program.

ドロップイン代替品: XC7K410T-1FFG676I — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: XC7K410T-1FFG676I (同一形状・フットプリント) — 相違点: Package, Speed Grade, Block RAM, Core Voltage, Device Type.

AMD
Package: 676-BBGA, FCBGA
Block RAM: 29306880 bits
Core Voltage: 1.0V
比較対象 XC7K410T-1FFG676I →
AMD
Package: 676-BBGA FCBGA
Speed Grade: -2
Device Type: Kintex-7 field-programmable gate array (FPGA)
比較対象 XC7K410T-1FFG676I →

XC7K410T-1FFG676C

✅ ドロップイン
AMD
📦 676-ball FCBGA, FFG676
Kintex-7 · 406720 · 400 · 29306880 bits · 1540 · 676-BBGA, FCBGA · 28nm · 1.0V

価格はお問い合わせください

データシートを見る →

XC7K410T-2FFG676C

✅ ドロップイン
AMD
📦 676-ball FCBGA, FFG676
Kintex-7 field-programmable gate array (FPGA) · 28 nm · 400 I/O · 676-BBGA FCBGA · 27 × 27 mm · -2 · Commercial · 0 °C to +85 °C

価格はお問い合わせください

データシートを見る →

XC7K410T-2FFG676I

✅ ドロップイン
📦 676-ball FCBGA, FFG676
Same 406,720-cell device and FFG676 footprint; speed grade changes from -1 to -2 while the industrial temperature suffix is retained.

📋 参考代替品(カタログ未掲載)

XC7K410T-1FFG676I 最大定格&電気的特性

Device Type Kintex-7 field-programmable gate array
Logic Cells 406,720 cells
Process Technology 28 nm
I/O Count 400 I/O
最大クロック周波数 400 MHz
Core Voltage 0.970 V to 1.03 V
Speed Grade -1
Temperature Grade Industrial
パッケージ 676-ball FCBGA, FFG676
Block RAM 28,620 Kb
Clock Management MMCM and PLL resources
High-Speed Serial Support PCI Express Gen3 and 10 Gigabit Ethernet
DSP Support Dedicated DSP resources
実装タイプ Surface mount
Packaging Form Tray

XC7K410T-1FFG676I 676-ball fcbga, ffg676 ピン配置ガイド

XC7K410T-1FFG676I (676-ball fcbga, ffg676 パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。

XC7K410T-1FFG676I の 676-ball fcbga, ffg676 パッケージピン配置図

詳細なピン配置データはありません: XC7K410T-1FFG676I.

詳細は データシート をご参照ください。

主な用途

XC7K410T-1FFG676I の用途: 6 件s: PCI Express Gen3 Endpoint Systems, 10 Gigabit Ethernet Data Planes, High-Channel-Count Data Acquisition, Industrial Control and Instrumentation, Programmable Video Processing, Communications Protocol Concentrators.

🖥️

PCI Express Gen3 Endpoint Systems

The XC7K410T-1FFG676I fits PCI Express Gen3 endpoint and accelerator designs because the Kintex-7 family supports PCI Express Gen3 and provides 406,720 programmable logic cells for protocol logic, DMA engines, queues, and control paths. Its 400 I/O also give an implementation room to combine high-speed transceivers with control, status, and optional legacy interfaces. Designers should allocate the transceiver pins required by the target lane count and use the AMD package files before PCB routing. The -1 speed grade must be used for timing closure, and any upgrade to a -2 FFG676 variant requires regenerated timing results even though the physical footprint remains unchanged.

🌐

10 Gigabit Ethernet Data Planes

The XC7K410T-1FFG676I is suitable for 10 Gigabit Ethernet line-card and network-interface designs because its Kintex-7 architecture combines high-speed serial capability with substantial programmable logic for packet classification, FIFO management, traffic shaping, and protocol processing. The 406,720-cell density allows network functions to be consolidated without immediately adding another parallel device. A practical implementation must reserve transceiver channels for the required lanes, provide a clean reference clock, and maintain controlled-impedance differential routing over the FCBGA. System timing, BER, thermal behavior, and compliance should be verified at the line rate rather than inferred from logic-cell capacity alone.

🏭

High-Channel-Count Data Acquisition

The XC7K410T-1FFG676I can implement high-channel-count acquisition and real-time processing systems using its 400 I/O, large block-memory capacity, and dedicated DSP resources. Multiple input channels can be captured, filtered, decimated, and routed through programmable pipelines without relying entirely on a sequential processor. Engineers should allocate I/O pins according to voltage-tolerance and banking rules, check simultaneous-switching-noise limits, and confirm that each selected I/O standard is compatible with the chosen bank voltage. The 676-ball FCBGA also requires distributed decoupling and adequate thermal copper so that sustained DSP and logic utilization does not create a concentrated hot spot.

🏭

Industrial Control and Instrumentation

The XC7K410T-1FFG676I fits industrial control, instrumentation, and deterministic test systems that require flexible parallel logic, multiple interface types, and long product-development flexibility. Its programmable fabric can implement motion sequencing, protocol bridges, timing controls, acquisition logic, and supervisory functions while dedicated DSP blocks handle filters and transforms. The industrial temperature suffix supports designs intended for extended industrial environments, subject to the exact operating limits listed for this orderable part. Designers should use the device-specific pinout to define power, ground, configuration, and I/O banks, then validate timing and signal integrity for every switching interface implemented on the board.

📺

Programmable Video Processing

The XC7K410T-1FFG676I supports programmable video pipelines because its 406,720 logic cells, block RAM, DSP resources, and 400 I/O provide substantial capacity for parallel pixel and packet processing. Possible blocks include image acquisition, color conversion, scaling, filtering, frame buffering, and format conversion. Resource sharing should be planned carefully so that multiple video streams do not exceed DSP, RAM, bandwidth, or timing limits. I/O standards and clock relationships must be mapped through the FFG676 package data, while high-speed video interfaces require controlled-impedance routing and deterministic clocking. Vivado timing and utilization reports for the exact -1 device are required before hardware implementation.

📡

Communications Protocol Concentrators

The XC7K410T-1FFG676I is appropriate for communications concentrators that must terminate and translate multiple serial or parallel protocols in a single programmable device. The high logic-cell count supports state machines, packet parsers, buffers, channelizers, and monitoring functions, while DSP resources can accelerate filters or transforms. Pin planning must account for each electrical standard, I/O-bank voltage, transceiver capability, and clocking domain before assignment. For migration among the listed FFG676 variants, the footprint can remain unchanged, but the target speed grade and temperature suffix must be selected early because they affect timing analysis, thermal validation, and qualification requirements.

おすすめ製品の概要

XC7K410T-2FFG676I Same-footprint faster speed-grade option 使用用途: PCI Express Gen3 Endpoint Systems, 10 Gigabit Ethernet Data Planes, Industrial Control and Instrumentation, Programmable Video Processing, Communications Protocol Concentrators XC7K410T-1FFG676C AMD 使用用途: PCI Express Gen3 Endpoint Systems, High-Channel-Count Data Acquisition, Industrial Control and Instrumentation, Communications Protocol Concentrators XC7K410T-2FFG676C AMD 使用用途: 10 Gigabit Ethernet Data Planes, High-Channel-Count Data Acquisition, Programmable Video Processing
What are the key specifications of XC7K410T-1FFG676I that engineers should know?
The XC7K410T-1FFG676I is a 406,720-cell Kintex-7 FPGA manufactured on 28 nm technology and packaged in a 676-ball FCBGA. It provides 400 I/O for this package combination, operates from 0.970 V to 1.03 V, and includes MMCM, PLL, DSP, and block-RAM resources. According to the AMD Kintex-7 product documentation, the family supports PCI Express Gen3 and 10 Gigabit Ethernet. The -1 suffix denotes the speed grade, FFG676 identifies the package, and the final I identifies the industrial temperature grade.
Where can I download the XC7K410T-1FFG676I datasheet PDF?
The XC7K410T datasheet PDF is available from the AMD document link in the data sources on this page, with an additional manufacturer-linked copy available through the Alldatasheet index. The AMD Kintex-7 product page and package-pinout download page provide the corresponding family information and device-package files. For PCB implementation, use the official Kintex-7 package-device pinout files together with UG475; those package resources are more useful for assigning all 676 balls than a third-party pin summary.
Where can I find the XC7K410T-1FFG676I pinout and 676-ball package data?
The authoritative XC7K410T-1FFG676I pinout is maintained in AMD's Kintex-7 package-device pinout files, with the organization and interpretation of package data described in UG475. The target uses the FFG676 package with 400 I/O, but the remaining balls include power, ground, configuration, and other fixed-function assignments. Use the exact FFG676 file for XC7K410T rather than mapping balls from a 900-ball FFG900 variant, because the two packages have different ball counts and cannot share a footprint.
Is the XC7K410T-1FFG676I a 400 MHz FPGA?
The XC7K410T-1FFG676I is listed with a maximum clock frequency of 400 MHz. That figure describes the device's stated clock capability, not guaranteed performance for every fabric path or interface. According to the AMD Kintex-7 family documentation, achievable timing also depends on speed grade, selected clocking resources, logic placement, routing, I/O standards, and design utilization. Timing closure must therefore be checked using the -1 speed-grade timing model in the appropriate Vivado device configuration.
Can the XC7K410T-1FFG676I be used for PCI Express Gen3 designs?
Yes, the Kintex-7 family supports PCI Express Gen3, making the XC7K410T-1FFG676I suitable for high-speed host-interface designs. The FPGA includes the programmable logic, serial transceivers, clocking resources, and I/O needed to implement a PCIe interface and associated control logic. Interface operation is not determined by the 406,720-cell figure alone; lane count, reference-clock architecture, transmitter and receiver settings, signal integrity, and system-level PCIe compliance must all be verified during implementation.
Is the XC7K410T-1FFG676I suitable for 10 Gigabit Ethernet equipment?
The XC7K410T-1FFG676I is suitable for 10 Gigabit Ethernet equipment because the Kintex-7 family supports 10 Gigabit Ethernet and offers substantial programmable logic, DSP, memory, and high-speed I/O resources. These capabilities allow designers to implement line-rate packet processing, MAC-related functions, traffic management, and test logic. Practical deployment requires a valid reference clock, carefully planned transceiver pins, controlled-impedance board routing, suitable optical or copper physical-layer circuitry, and protocol-level verification.
What can replace the XC7K410T-1FFG676I on the same PCB footprint?
XC7K410T-1FFG676C is the closest same-package candidate because it retains the -1 speed grade, FFG676 package, and 406,720-cell Kintex-7 device family while changing the final temperature-grade suffix from I to C. Its exact I/O and operating-temperature details must be checked before substitution. Other FFG676 speed-grade variants share the physical footprint, but their timing, temperature, or qualification characteristics may require design review and a new timing closure.
Is XC7K410T-1FFG676I the same as XC7K410T-1FFG676C?
They are closely related Kintex-7 devices in the same FFG676 package, but they are not identical in every ordering characteristic. XC7K410T-1FFG676C uses the C temperature suffix, whereas the target uses the I industrial suffix. According to the manufacturer naming information, both use the -1 speed grade and the same 406,720-cell device family. Confirm the required commercial temperature range and review the package data before treating the C-version as a drop-in replacement.
When should I choose XC7K410T-1FFG676I instead of XC7K410T-2FFG676I?
Choose XC7K410T-1FFG676I when the design requires the -1 performance class and its timing closure is met with that speed grade. Choose XC7K410T-2FFG676I when additional timing margin or a higher target frequency is necessary and the design has been revalidated for -2. Both parts use the FFG676 package and the same Kintex-7 logic density, so the footprint can remain unchanged, but the faster grade can change timing closure, power characteristics, and qualification requirements.
Is there a confirmed cross-brand drop-in replacement for XC7K410T-1FFG676I?
No cross-brand drop-in replacement is confirmed by the available manufacturer and distributor information. A published migration reference describes the GX1P170 as potentially pin-compatible with selected XC7K410T FFG676 configurations, but that statement is conditional on matching the complete ball map, power architecture, and interface assignments. It should not be treated as an automatic replacement until the exact device revision, package, power pins, configuration pins, and I/O assignments have been compared against the AMD package files.
Where can I buy XC7K410T-1FFG676I and what is its current price?
Use the Request a Quote form on this page to request XC7K410T-1FFG676I pricing, stock confirmation, and lead time. The form is the appropriate purchasing path because FPGA availability can vary with the exact package suffix, production allocation, and order quantity. No fixed unit price should be inferred from a generic Kintex-7 family price, and the quote should identify XC7K410T-1FFG676I exactly to avoid package or temperature-grade substitutions.
What is the lead time for XC7K410T-1FFG676I?
The current lead time for XC7K410T-1FFG676I should be requested through the Request a Quote form on this page. Lead time can depend on exact suffix accuracy, available inventory, scheduled allocations, and requested quantity. A lead-time estimate based only on the XC7K410T family may be misleading because the -1 speed grade and I temperature suffix define a specific orderable device. Include target quantity and requested delivery date in the inquiry.
Is XC7K410T-1FFG676I currently in stock?
Current XC7K410T-1FFG676I stock should be confirmed through the Request a Quote form on this page. Stock status for the exact FFG676 package and industrial suffix can change independently of other Kintex-7 orderable parts. The form allows buyers to request quantity availability and delivery information for the exact MPN, reducing the risk of receiving a different speed grade, temperature grade, package code, or package form.
What is the difference between XC7K410T-1FFG676I and XC7K410T-2FFG676C?
The XC7K410T-1FFG676I uses the -1 speed grade and industrial temperature suffix, while XC7K410T-2FFG676C uses the -2 speed grade and commercial temperature suffix. Both are 676-ball Kintex-7 devices with 406,720 logic cells and 28 nm technology. They share the FFG676 footprint, but the -2 grade changes timing capability and the final suffix changes the temperature classification. Verify whether the faster timing grade and commercial temperature range meet the actual system requirements.
How much power does the XC7K410T-1FFG676I consume?
Power consumption for the XC7K410T-1FFG676I is design-dependent and cannot be represented by one fixed value. It varies with utilized logic, switching activity, configured I/O standards, clocking, transceiver use, voltage, temperature, and resource occupancy. Use AMD's power-estimation and Vivado implementation reports for the selected -1 device, then validate the finished board with thermal and power measurements. The 676-ball FCBGA also requires a carefully designed power-delivery network and adequate thermal spreading.
What tools are required to program the XC7K410T-1FFG676I?
AMD Vivado is the principal design suite for Kintex-7 FPGA development, including device selection, synthesis, implementation, timing analysis, bitstream generation, and hardware debugging. The programming interface used by a finished board can include JTAG for configuration and debugging and may include a dedicated configuration memory interface for boot operation. The exact interface and voltage requirements must be taken from the FFG676 package pinout and the board-level design, rather than inferred from the FPGA's general specifications.

エンジニアリング参考データ: XC7K410T-1FFG676I — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose XC7K410T-1FFG676I when a design needs 406,720 Kintex-7 logic cells, a -1 speed grade, 400 I/O, and an industrial-temperature ordering suffix in the FFG676 package. XC7K410T-1FFG676C is the closest same-footprint option when the commercial temperature class is acceptable, but its listed 250 I/O arrangement must be reconciled with the target pinout before substitution. Use XC7K410T-2FFG676I when the board can stay at FFG676 but the design needs more timing margin; regenerate timing and power results because the speed grade changes. Use XC7K410T-2FFG676C only when both the -2 timing grade and commercial temperature class are appropriate. The listed FFG676 alternatives preserve the physical footprint, but speed grade, temperature class, I/O population, timing closure, and qualification requirements must all be reviewed before release.

代替品との比較

パラメータ この製品 XC7K410T-1FFG676C XC7K410T-2FFG676C XC7K410T-2FFG676I
Package 676-ball FCBGA, FFG676 676-ball FCBGA, FFG676 676-ball FCBGA, FFG676 676-ball FCBGA, FFG676
Brand AMD AMD AMD AMD
Speed Grade -1 -1 -2 -2
Temperature Suffix I - Industrial C - Commercial C - Commercial I - Industrial

主な差別化要因

  • Industrial temperature suffix within the same FFG676 migration family (vs XC7K410T-1FFG676C)
  • Lower speed grade provides a defined timing target without requiring the -2 device (vs XC7K410T-2FFG676I)
  • High logic density with 400 user I/O in a 676-ball FCBGA (vs XC7K410T-1FFG676C)

設計ノート

Use the AMD FFG676 package-device pinout file for every ball assignment and cross-check it against UG475 before schematic capture. The 676-ball FCBGA includes power, ground, configuration, user I/O, and fixed-function balls; placing only the 400 user I/Os can lead to incorrect power-plane or configuration connections. Keep the board design tied to the exact XC7K410T device and FFG676 package, and do not reuse ball assignments from an FBG676 or FFG900 variant without an explicit package comparison.

Plan the FPGA power network as a multilayer structure with closely placed decoupling and continuous reference planes beneath the FCBGA. Separate supplies for core, I/O banks, auxiliary rails, and configuration requirements should follow the manufacturer power-decoupling recommendations. Bank voltage selection must match every assigned I/O standard. During implementation, use the -1 device power report for the intended clocking, resource utilization, temperature, and activity assumptions, then verify rail sequencing and power-up behavior on the completed board.

Provide uninterrupted thermal copper beneath and around the 676-ball FPGA to spread heat from the central logic and DSP region into the PCB. Estimate worst-case junction temperature from the implemented design's power and the board's actual thermal path rather than relying on a generic package figure. Keep thermal vias effective by avoiding blocked antipads and plated barrels beneath power and ground balls. Validate the assembled board at the highest expected ambient temperature and utilization to confirm that the industrial-temperature choice remains within its limits.

Route high-speed differential signals over uninterrupted reference planes with the PCB stack-up's calculated controlled impedance. Transceiver and clock paths require shortest practical connections, suitable via transitions, and matched length where the interface specification demands it. Keep noisy or switching signals away from sensitive clock and reference inputs, and follow AMD's power and connectivity guidance for each bank. Post-layout extraction and board-level SI simulation are appropriate for PCIe Gen3, 10 Gigabit Ethernet, or other high-rate interfaces.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The industrial suffix identifies the temperature grade but does not by itself establish automotive qualification or environmental-compliance status. Compliance attributes were not found for this exact orderable device and remain unknown.

関連検索

xc7k410t 1ffg676i xc7k410t datasheet xc7k410t fpga xc7k410t 1ffg900i xc7k410t 2ffg676i xc7k410t 1ffg900c XC7K410T-1FFG676I datasheet XC7K410T-1FFG676I pinout XC7K410T-1FFG676I package XC7K410T-1FFG676I equivalent XC7K410T-1FFG676I replacement XC7K410T-1FFG676I price XC7K410T-1FFG676I stock AMD XC7K410T-1FFG676I XC7K410T-1FFG676I application circuit

関連部品&用語

AMD Xilinx XC7K410T-1FFG676I XC7K410T-1FFG676C XC7K410T-2FFG676C XC7K410T-2FFG676I Kintex-7 FPGA field-programmable gate array programmable logic device digital semiconductor 28 nm process technology 406,720 logic cells 400 I/O 400 MHz MMCM PLL DSP block RAM FCBGA FFG676 surface-mount package PCI Express Gen3 10 Gigabit Ethernet industrial temperature grade Vivado
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示