XC7K410T-3FBG676E - 406K Logic Cell Kintex-7 FPGA | AMD
部品番号: XC7K410T-3FBG676E ✓ 生産中XC7K410T-3FBG676E 概要
A Kintex-7 FPGA belongs to the programmable-logic hierarchy: FPGA > field-programmable gate array > semiconductor > integrated circuit. Unlike a fixed-function logic device, an FPGA combines programmable logic blocks, block RAM, programmable I/O, dedicated processing resources, and high-speed serial transceivers in one configurable device. This makes the family suitable for systems whose algorithms, interfaces, or data paths evolve after design begins.
The XC7K410T-3FBG676E provides 406,720 logic cells for parallel data paths and control logic, 28,620 Kb of embedded block RAM for buffering and data storage, and 400 user I/O for external interfaces. The FBG676 package also exposes the device's high-speed connectivity and configuration resources. Package-ball assignment, power rails, differential I/O rules, and speed constraints must be treated as a single design package rather than selected independently.
The -3 designation identifies the family's highest-performance speed grade. This grade is useful when timing closure, interface throughput, or processing throughput cannot be met by a lower-speed device. The E temperature suffix identifies the extended-temperature ordering option, although exact operating-temperature limits and grade-specific AC timing values should be confirmed in the manufacturer datasheet before release.
Typical uses include high-throughput signal processing, industrial imaging, communications infrastructure, test equipment, defense platforms, and embedded systems that require parallel logic, substantial block RAM, and numerous external interfaces. The device can also serve as a platform for tightly coupled acquisition and processing pipelines, where moving data between a sensor or converter and programmable logic without repeated host transfers is important.
Design planning must include complete pin assignment, power-decoupling analysis, clock topology, configuration-memory interface design, and thermal validation for the 676-ball FCBGA. A successful design should also include timing constraints for every implemented clock domain and post-layout verification against the speed-grade limits.
This page consolidates the device identity, resource counts, package information, sourcing path, package-compatible alternatives, and engineering guidance needed to plan a Kintex-7 PCB and select an appropriate ordering option for a given deployment.
ドロップイン代替品: XC7K410T-3FBG676E — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: XC7K410T-3FBG676E (同一形状・フットプリント) — 相違点: Device Type, Mounting Type, Temperature Grade.
XC7K410T-3FBG676I
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
XC7K410T-2FBG676I
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC7K410T-2FBG676E
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
XC7K410T-3FBG676C
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
XC7K410T-1FBG676I
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →XC7K410T-3FBG676E 最大定格&電気的特性
| FPGA Family | Kintex-7 |
| Device Type | Field-Programmable Gate Array |
| Logic Cells | 406,720 cells |
| Block RAM | 28,620 Kb |
| User I/O | 400 I/O |
| パッケージ | 676-ball FCBGA |
| Package Designation | FBG676 |
| Speed Grade | -3 grade |
| Temperature Grade | E suffix, extended-temperature ordering option |
| Logic Cell Density | 406,720 logic cells |
| Block RAM Density | 28,620 Kb |
| I/O Density | 400 user I/O |
| 実装タイプ | Surface-mount FCBGA |
XC7K410T-3FBG676E fbg676 ピン配置ガイド
XC7K410T-3FBG676E (fbg676 パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: XC7K410T-3FBG676E.
詳細は データシート をご参照ください。
主な用途
XC7K410T-3FBG676E の用途: 6 件s: Industrial Imaging and Machine Vision, Communications Signal Processing, Aerospace and Defense Processing, Test and Measurement Instruments, High-Speed Data Acquisition, Network and Storage Infrastructure.
Industrial Imaging and Machine Vision
The XC7K410T-3FBG676E fits industrial imaging systems that combine sensor acquisition, real-time correction, feature extraction, and image classification in one programmable device. Its 406,720 logic cells support parallel pipelines, while 28,620 Kb of block RAM provides local line and frame buffers. The 400 user I/O allow direct connection to cameras, converters, and control logic. The -3 speed grade benefits timing-sensitive pixel pipelines, although power and thermal performance must be evaluated against the actual frame rate and utilization.
おすすめ
Communications Signal Processing
The XC7K410T-3FBG676E is suitable for communications equipment requiring parallel filtering, modulation, packet processing, and high-speed data movement. Its 406,720 logic cells allow multiple channels and protocol engines to operate in parallel, while 28,620 Kb of block RAM supports buffering, symbol storage, and lookup operations. The 676-ball package exposes the high-speed resources needed for demanding interfaces. Designers should use the manufacturer package files and speed-grade timing tables to implement each transceiver, clock, and I/O interface correctly.
おすすめ
Aerospace and Defense Processing
The XC7K410T-3FBG676E can support high-performance embedded processing, signal conditioning, navigation-data processing, and communication-control functions where programmable logic must operate predictably over extended temperature conditions. The E suffix identifies an extended-temperature ordering option, while the -3 grade favors demanding timing paths. The 406,720 logic cells and 28,620 Kb of block RAM allow local data processing without continuous processor transfers. Formal qualification status, radiation tolerance, and environmental certification must be verified separately for the intended program.
おすすめ
Test and Measurement Instruments
The XC7K410T-3FBG676E is appropriate for high-channel-count instrumentation, waveform generation, logic analysis, protocol testing, and real-time acquisition. Its 400 user I/O provide substantial parallel connectivity, while 406,720 logic cells support concurrent test engines and control logic. The 28,620 Kb of block RAM can implement acquisition and processing buffers close to the measurement data source. Clock-jitter budgeting, input thresholds, output timing, and analog front-end requirements remain system-level constraints that must be validated independently.
おすすめ
High-Speed Data Acquisition
The XC7K410T-3FBG676E supports acquisition systems that must transfer and process large volumes of converter, radar, or sensor data in real time. Its parallel logic resources can implement deserialization, digital filtering, calibration, and data reduction, while 28,620 Kb of block RAM provides high-bandwidth local storage. The 400 I/O and 676-ball package support dense clock, control, and high-speed connectivity. Practical implementation requires careful PCB lane routing, source-synchronous timing, power integrity, and device-specific I/O voltage planning.
おすすめ
Network and Storage Infrastructure
The XC7K410T-3FBG676E fits infrastructure equipment that performs packet classification, compression, encryption, storage-interface processing, or protocol conversion. The 406,720 logic cells enable parallel datapaths, and 28,620 Kb of block RAM supports packet buffering and flow-control structures. The large FBG676 package provides the ball count needed by designs combining wide parallel buses with high-speed serial links. The -3 grade can improve clock-rate headroom, but system designers should balance that performance against switching power, cooling capacity, and board-level signal integrity.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: XC7K410T-3FBG676E — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | XC7K410T-3FBG676I | XC7K410T-2FBG676I | XC7K410T-2FBG676E | XC7K410T-3FBG676C | XC7K410T-1FBG676I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 676-ball FCBGA (FBG676) | 676-ball FCBGA (FBG676) | 676-ball FCBGA (FBG676) | 676-ball FCBGA (FBG676) | 676-ball FCBGA (FBG676) | 676-ball FCBGA (FBG676) |
| FPGA Family | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 |
| Speed Grade | -3 | -3 | -2 | -2 | -3 | -1 |
| Temperature Suffix | E | I | I | E | C | I |
| Mounting Type | Surface-mount FCBGA | Surface-mount FCBGA | Surface-mount FCBGA | Surface-mount FCBGA | Surface-mount FCBGA | Surface-mount FCBGA |
主な差別化要因
- Highest-performance speed grade in the listed Kintex-7 family (vs XC7K410T-2FBG676I)
- Extended-temperature ordering option (vs XC7K410T-3FBG676C)
- Maximum available speed margin among the listed alternatives (vs XC7K410T-1FBG676I)
設計ノート
Treat the FBG676 footprint as a complete high-speed PCB design rather than a generic 676-ball grid. Assign power, ground, configuration, clock, and user I/O according to the AMD package files, preserve the specified ball and via patterns, and validate every high-speed lane with the relevant transceiver constraints. Do not derive a replacement land pattern from the package name alone; the exact package drawing and pinout data control assembly and connectivity.
Plan the power tree around the device's documented supply rails and the configuration scheme used by the design. Place decoupling capacitance at the associated package balls, minimize supply-path inductance, and keep switching-return current within the FPGA footprint before it reaches board planes. Because the -3 grade can increase dynamic power, repeat utilization-based power analysis after logic synthesis and verify the final rail currents against regulator and thermal limits.
The 676-ball FCBGA can require deliberate heat spreading even when its electrical design is complete. Model the package, solder balls, PCB copper, vias, enclosure, and ambient conditions in the thermal analysis, then add thermal vias or copper structures only in locations allowed by the package design. Compare estimated junction temperature with the selected E-grade limits and avoid relying on airflow that may not exist in the final enclosure.
Do not treat a lower-speed ordering code as a transparent substitute for the -3 device. Although package-compatible XC7K410T variants use the same FBG676 footprint, changing speed grade can invalidate timing closure, while changing the E, I, or C temperature suffix can affect environmental requirements. Re-run synthesis or implementation with the actual device speed model, review timing slack and power, and confirm the assembly and orderable configuration before release.
コンプライアンス情報
Compliance status has not been established from the product listings or linked family documentation and requires confirmation from AMD for the exact ordering code.