XC7Z035-L2FFG676I Dual Cortex-A9 Zynq SoC | AMD
部品番号: XC7Z035-L2FFG676I ✓ 生産中XC7Z035-L2FFG676I 概要
A system-on-chip, or SoC, combines a hard processor subsystem with programmable logic in a single integrated circuit. The XC7Z035 belongs to the Zynq-7000 family and the broader embedded FPGA category. Its ARM Cortex-A9 subsystem handles sequential software tasks, while its Kintex-7 fabric implements data paths, protocol engines, control logic, and other hardware-specific functions. This hierarchy places the device above conventional microcontrollers and fixed-function interface chips while avoiding the software overhead of a separate processor-plus-FPGA implementation.
Principal features include a dual ARM Cortex-A9 MPCore configuration with CoreSight debug support, 275,000 FPGA logic cells, an 800 MHz processor rating, and a 676-FCBGA surface-mount package. The integrated architecture allows processor-to-programmable-logic communication through dedicated interfaces, reducing board-level interconnect requirements. Compared with a discrete MCU and FPGA design, consolidation can simplify PCB routing, reduce component count, and shorten development cycles.
The XC7Z035-L2FFG676I is suitable for industrial networking, embedded vision, control systems, communications equipment, and data-acquisition systems. Its 27 x 27 mm FCBGA package requires a dense land pattern, careful power delivery, and thermal design that accounts for both processor and FPGA power. Design engineers should also plan high-speed memory and programmable-logic routing using the AMD package pinout files referenced in UG865.
For connected equipment, the device can combine Linux or real-time operating-system software with dedicated FPGA logic for deterministic data processing. For image and signal-processing systems, parallel pipelines can accelerate filtering, compression, protocol handling, or sensor-data transfer while the ARM cores manage control flow and external networking.
The primary design considerations are BGA layout, power-rail sequencing, decoupling, thermal management, and high-speed signal integrity. Maintain short return paths for supply and ground connections, provide effective local capacitance at each rail, and validate the complete stack-up and power-delivery network against the applicable AMD implementation guidance. This page also distinguishes same-package speed, temperature, and package-code alternatives so engineers can assess drop-in suitability without overlooking device qualification or Vivado target differences.
The XC7Z035-L2FFG676I combines reusable ARM processing, CoreSight visibility, and programmable FPGA logic in one 27 x 27 mm FCBGA device. Its 275,000 logic cells and 800 MHz processor make it a configurable platform for embedded control, communications, industrial imaging, and high-throughput data-processing systems where integration, deterministic hardware acceleration, and design flexibility are important.
ドロップイン代替品: XC7Z035-L2FFG676I — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: XC7Z035-L2FFG676I (同一形状・フットプリント) — 相違点: Device Type, Package, Speed Grade, Temperature Grade, FPGA Logic Cells.
XC7Z035-2FFG676E
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC7Z035-1FFG676C
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC7Z035-2FBG676I
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC7Z035-1FBG676C
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC7Z035-2FFG676I
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC7Z035-L2FFG676I 最大定格&電気的特性
| Product Type | Zynq-7000 SoC FPGA |
| Processor Core | Dual ARM Cortex-A9 MPCore |
| Maximum Processor Frequency | 800 MHz |
| FPGA Logic Cells | 275,000 cells |
| FPGA Family | Kintex-7 |
| Package Type | 676-FCBGA |
| Package Dimensions | 27 x 27 mm |
| Package Pin Count | 676 balls |
| 実装タイプ | Surface mount |
| Debug Support | CoreSight |
| Device Architecture | Heterogeneous ARM processor and FPGA SoC |
| Process Technology | 28 nm |
| Core Count | 2 ARM Cortex-A9 cores |
| Manufacturer | AMD |
XC7Z035-L2FFG676I 676 balls ピン配置ガイド
XC7Z035-L2FFG676I (676 balls パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: XC7Z035-L2FFG676I.
詳細は データシート をご参照ください。
主な用途
XC7Z035-L2FFG676I の用途: 6 件s: Industrial Networking Gateway, Embedded Vision Processing, Data Acquisition and Signal Conditioning, Programmable Logic Controller, Communications Protocol Accelerator, Secure Embedded Processing Platform.
Industrial Networking Gateway
The XC7Z035-L2FFG676I fits industrial gateways that must combine network protocol handling with deterministic hardware data movement. The dual ARM Cortex-A9 processors at 800 MHz can run a network operating system, configuration services, and management logic, while the 275,000-cell Kintex-7 fabric can accelerate packet classification, filtering, encryption, or serial data conversion. This division of labor allows data to move through dedicated pipelines without relying entirely on software. A 676-FCBGA implementation also requires controlled layer stacking, BGA escape routing, and precise power delivery. System architects should map worst-case traffic, DDR memory bandwidth, and thermal load before fixing the clock and I/O configuration.
おすすめ
Embedded Vision Processing
The XC7Z035-L2FFG676I is appropriate for embedded vision systems that combine image acquisition, real-time pixel processing, and network-connected control. Its Kintex-7 fabric can implement parallel stages for sensor correction, color conversion, filtering, thresholding, or object-feature extraction, while the dual Cortex-A9 cores manage frame buffers, configuration, and higher-level processing. The device's 800 MHz processor rating and 275,000 logic cells provide substantial implementation flexibility without requiring a separate FPGA. Designers should allocate memory bandwidth carefully, keep high-speed differential routes short, and validate lane-to-lane skew. The 27 x 27 mm FCBGA also makes thermal design and assembly yield important parts of the enclosure design.
おすすめ
Data Acquisition and Signal Conditioning
The XC7Z035-L2FFG676I suits data-acquisition systems requiring synchronized sampling, digital filtering, and local computation. The programmable fabric can connect to parallel or serial converters, implement trigger logic, and execute parallel filtering stages, while the Cortex-A9 subsystem supervises calibration, buffers results, and communicates with a host. This architecture can reduce external component count and make timing behavior more deterministic than a processor-only implementation. For a working design, establish clock-domain boundaries, define CDC schemes, and verify DDR bandwidth against the combined processor and fabric workload. Power rails must also support processor transients while maintaining stable operation across the FPGA's configurable logic and I/O resources.
おすすめ
Programmable Logic Controller
The XC7Z035-L2FFG676I can serve as a high-performance programmable logic controller for equipment requiring both deterministic machine control and a rich supervisory software layer. The ARM Cortex-A9 subsystem can execute control applications, diagnostics, communications, and operator-interface logic, while the Kintex-7 fabric implements motion timing, encoder processing, safety interlocks, or high-speed I/O. The 275,000-cell fabric allows control tasks to be partitioned from the processor rather than forcing every cycle-sensitive operation into software. A production design should define reset domains, watchdog behavior, and safe outputs independently of the operating system. Thermal analysis is also essential because processor activity and FPGA utilization can coincide during demanding machine cycles.
おすすめ
Communications Protocol Accelerator
The XC7Z035-L2FFG676I is well matched to communications equipment that must terminate or transform high-rate streams while executing protocol-management software. Dedicated fabric pipelines can handle framing, interpolation, scrambling, buffering, and clock-domain crossing, while the dual Cortex-A9 cores manage link state, statistics, and configuration. This hardware/software split can support deterministic throughput and reduce dependence on general-purpose processor cycles. The implementation should account for receive and transmit path latency, DDR bandwidth, and the speed grade selected for the intended clock rates. Because the device uses a dense 676-FCBGA package, signal-integrity simulation and careful return-path design are as important as the logical block diagram.
おすすめ
Secure Embedded Processing Platform
The XC7Z035-L2FFG676I can support embedded platforms that combine an operating-system environment with hardware-assisted security and I/O processing. ARM software can manage identity, configuration, networking, and policy, while programmable logic accelerates cryptography, packet filtering, secure boot support functions, or peripheral data isolation. Integrating these functions in one SoC can reduce board area and avoid routing sensitive data across multiple external devices. Designers should still review the exact AMD device's security capabilities and use an appropriate root-of-trust strategy rather than assuming that programmable logic alone supplies secure boot. Device-programmable restrictions, JTAG access, external interfaces, and update mechanisms should be reviewed before the part is used in a security-critical product.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: XC7Z035-L2FFG676I — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | XC7Z035-2FFG676E | XC7Z035-1FFG676C | XC7Z035-2FBG676I | XC7Z035-1FBG676C | XC7Z035-2FFG676I |
|---|---|---|---|---|---|---|
| Package | 676-FCBGA (27 x 27 mm) | 676-FCBGA | 676-FCBGA | 676-FCBGA | 676-FCBGA | 676-FCBGA |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Product Family | Zynq-7000 | Zynq-7000 | Zynq-7000 | Zynq-7000 | Zynq-7000 | Zynq-7000 |
| Speed Grade | -2L | -2 | -1 | -2 | -1 | -2 |
| Qualification Suffix | I | E | C | I | C | I |
主な差別化要因
- Combines an 800 MHz dual-core ARM processor with a 275,000-cell FPGA fabric (vs XC7K410T-2FFG676I)
- Provides the same 676-FCBGA family while offering distinct qualification choices (vs XC7Z035-2FFG676E)
- Supports a directly related -1 speed option for cost or availability-driven designs (vs XC7Z035-1FFG676C)
- Keeps the SoC architecture when moving between closely related package codes (vs XC7Z035-2FBG676I)
設計ノート
Treat the 676-FCBGA land pattern as a high-speed, high-pin-count design rather than a conventional two-layer component footprint. Use the exact AMD package pinout file for the selected suffix, preserve the package ball map, and design escape routing according to the supported board stack-up. Confirm drill, solder-mask, paste, and assembly requirements with the package drawing before releasing artwork.
Provide separate, well-decoupled supply paths for the ARM subsystem, FPGA core, I/O banks, and auxiliary rails defined by the device documentation. Place local ceramic capacitance at the supply and ground ball groups and minimize impedance between each capacitor and its associated balls. Validate the power tree against maximum processor activity, concurrent fabric utilization, and the device's stated operating limits before finalizing component values.
Calculate heat dissipation from both the ARM processing subsystem and programmable logic rather than treating the 800 MHz processor rating as a steady-state load estimate. Use the selected device's power characteristics and realistic activity profiles, then verify junction-temperature margin with the PCB stack-up, enclosure airflow, and package construction. The 27 x 27 mm FCBGA needs effective heat spreading through both the board and its mechanical system.
Use controlled-impedance routing for memory and high-speed I/O interfaces, with continuous reference planes and short return paths. Keep BGA escape segments within the manufacturer's topology rules, avoid unnecessary vias, and apply length matching where the selected interface requires it. Post-layout simulation should include the actual stack-up, pad and via models, switching activity, and simultaneous processor and fabric traffic.
Do not select a replacement solely because its name ends in 676 and its ball count matches. Confirm speed grade, temperature and qualification suffix, package-code character, exact ball map, supported I/O configuration, and Vivado device target. Keep the clocking and reset design deterministic across processor, fabric, and external interfaces, and verify that every migration path preserves the intended clock-frequency limits.
コンプライアンス情報
No target-specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was available for the exact MPN. Obtain the current AMD product declaration or material compliance report for the selected order code before regulatory use.